! Started logfile: /g0/scr/pima/npcsa_uvs/J1257+8342_X_uvs.log on Sun Oct  6 10:28:28 2013
obs /g0/scr/pima/npcsa_uvs/J1257+8342_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1257+8342_X_uva.fits
! AN table 1: 54 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.381687 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1257+8342
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2968 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1257+8342_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008408Jy  sigma=0.742261
! Fit after  self-cal, rms=0.943316Jy  sigma=0.669129
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.73 mas, bmaj=8.043 mas, bpa=-14.82 degrees
! Estimated noise=44.2934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.074639 Jy
! Component: 100  -  total flux cleaned = 0.087912 Jy
! Total flux subtracted in 100 components = 0.087912 Jy
! Clean residual min=-0.011976 max=0.011975 Jy/beam
! Clean residual mean=0.000021 rms=0.004529 Jy/beam
! Combined flux in latest and established models = 0.087912 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.087912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123445Jy  sigma=0.056114
! Fit after  self-cal, rms=0.122312Jy  sigma=0.054942
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=8.253 mas, bpa=-13.42 degrees
! Estimated noise=22.4898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146194 Jy
! Component: 100  -  total flux cleaned = 0.00313231 Jy
! Component: 150  -  total flux cleaned = 0.00371414 Jy
! Component: 200  -  total flux cleaned = 0.00401856 Jy
! Total flux subtracted in 200 components = 0.00401856 Jy
! Clean residual min=-0.001651 max=0.001619 Jy/beam
! Clean residual mean=0.000006 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.0919306 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 74 components and 0.0919306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122222Jy  sigma=0.054235
! Fit after  self-cal, rms=0.122190Jy  sigma=0.054201
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.85     HN        1.00*    KP        0.93     
!   LA        1.05     MK        1.00*    NL        0.98     OV        0.78     
!   PT        0.84     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.89     HN        1.00*    KP        0.90     
!   LA        0.91     MK        1.00*    NL        0.88     OV        1.06     
!   PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.98     HN        1.00*    KP        0.80     
!   LA        0.81     MK        1.00*    NL        0.95     OV        0.89     
!   PT        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.84     HN        1.00*    KP        0.95     
!   LA        0.91     MK        1.00*    NL        0.88     OV        0.93     
!   PT        0.88     
! 
! 
! Fit before self-cal, rms=0.122190Jy  sigma=0.054201
! Fit after  self-cal, rms=0.104998Jy  sigma=0.051619
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.239 mas, bmaj=8.261 mas, bpa=-13.4 degrees
! Estimated noise=18.1981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0116836 Jy
! Component: 100  -  total flux cleaned = -0.0154377 Jy
! Component: 150  -  total flux cleaned = -0.0171481 Jy
! Component: 200  -  total flux cleaned = -0.0176598 Jy
! Total flux subtracted in 200 components = -0.0176598 Jy
! Clean residual min=-0.001124 max=0.001118 Jy/beam
! Clean residual mean=0.000005 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.0742707 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 108 components and 0.0742707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101544Jy  sigma=0.053376
! Fit after  self-cal, rms=0.101516Jy  sigma=0.053316
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101516Jy  sigma=0.053316
! Fit after  self-cal, rms=0.087192Jy  sigma=0.051490
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.265 mas, bmaj=8.287 mas, bpa=-13.44 degrees
! Estimated noise=14.9093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00950777 Jy
! Component: 100  -  total flux cleaned = -0.0122339 Jy
! Component: 150  -  total flux cleaned = -0.013209 Jy
! Component: 200  -  total flux cleaned = -0.0138146 Jy
! Total flux subtracted in 200 components = -0.0138146 Jy
! Clean residual min=-0.000829 max=0.000826 Jy/beam
! Clean residual mean=0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0604561 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 140 components and 0.0604561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084531Jy  sigma=0.053223
! Fit after  self-cal, rms=0.084507Jy  sigma=0.053204
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000447115 Jy
! Component: 100  -  total flux cleaned = -0.000496379 Jy
! Component: 150  -  total flux cleaned = -0.000754777 Jy
! Component: 200  -  total flux cleaned = -0.00117074 Jy
! Total flux subtracted in 200 components = -0.00117074 Jy
! Clean residual min=-0.000683 max=0.000678 Jy/beam
! Clean residual mean=0.000000 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0592854 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 195 components and 0.0592854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084318Jy  sigma=0.053290
! Fit after  self-cal, rms=0.084303Jy  sigma=0.053280
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084303Jy  sigma=0.053280
! Fit after  self-cal, rms=0.072125Jy  sigma=0.051384
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.295 mas, bmaj=8.317 mas, bpa=-13.5 degrees
! Estimated noise=12.1554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00770733 Jy
! Component: 100  -  total flux cleaned = -0.00981547 Jy
! Component: 150  -  total flux cleaned = -0.0109668 Jy
! Component: 200  -  total flux cleaned = -0.0115031 Jy
! Total flux subtracted in 200 components = -0.0115031 Jy
! Clean residual min=-0.000634 max=0.000635 Jy/beam
! Clean residual mean=0.000001 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.0477823 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 230 components and 0.0477823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070040Jy  sigma=0.053098
! Fit after  self-cal, rms=0.070001Jy  sigma=0.053078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125869 Jy
! Component: 100  -  total flux cleaned = 8.4858e-05 Jy
! Component: 150  -  total flux cleaned = 5.14839e-05 Jy
! Component: 200  -  total flux cleaned = -0.000165 Jy
! Total flux subtracted in 200 components = -0.000165 Jy
! Clean residual min=-0.000506 max=0.000514 Jy/beam
! Clean residual mean=0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0476173 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 270 components and 0.0476173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069859Jy  sigma=0.053182
! Fit after  self-cal, rms=0.069825Jy  sigma=0.053133
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069825Jy  sigma=0.053133
! Fit after  self-cal, rms=0.059897Jy  sigma=0.051248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=8.51 mas, bpa=-12.59 degrees
! Estimated noise=9.99065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0063148 Jy
! Component: 100  -  total flux cleaned = -0.00764594 Jy
! Component: 150  -  total flux cleaned = -0.00783726 Jy
! Component: 200  -  total flux cleaned = -0.00797479 Jy
! Total flux subtracted in 200 components = -0.00797479 Jy
! Clean residual min=-0.000405 max=0.000407 Jy/beam
! Clean residual mean=-0.000000 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0396425 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 306 components and 0.0396425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058280Jy  sigma=0.052932
! Fit after  self-cal, rms=0.058244Jy  sigma=0.052909
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023006 Jy
! Component: 100  -  total flux cleaned = 0.00056041 Jy
! Component: 150  -  total flux cleaned = 0.000661253 Jy
! Component: 200  -  total flux cleaned = 0.000698735 Jy
! Total flux subtracted in 200 components = 0.000698735 Jy
! Clean residual min=-0.000304 max=0.000303 Jy/beam
! Clean residual mean=-0.000000 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.0403412 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 342 components and 0.0403412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058162Jy  sigma=0.053012
! Fit after  self-cal, rms=0.058153Jy  sigma=0.053006
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.33 mas, bmaj=8.349 mas, bpa=-13.56 degrees
! Estimated noise=9.90859 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.33 x 8.349 at -13.56 degrees (North through East)
! Clean map  min=-0.002944  max=0.041762 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.794 mas, bmaj=8.083 mas, bpa=-15.04 degrees
! Estimated noise=20.3911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357657 Jy
! Component: 100  -  total flux cleaned = 0.0438001 Jy
! Component: 150  -  total flux cleaned = 0.0440495 Jy
! Component: 200  -  total flux cleaned = 0.0422484 Jy
! Total flux subtracted in 200 components = 0.0422484 Jy
! Clean residual min=-0.004698 max=0.004736 Jy/beam
! Clean residual mean=0.000005 rms=0.001949 Jy/beam
! Combined flux in latest and established models = 0.0422484 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.0422484 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.33 mas, bmaj=8.349 mas, bpa=-13.56 degrees
! Estimated noise=9.90859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103278 Jy
! Component: 100  -  total flux cleaned = 0.00145876 Jy
! Component: 150  -  total flux cleaned = 0.00199624 Jy
! Component: 200  -  total flux cleaned = 0.0024359 Jy
! Total flux subtracted in 200 components = 0.0024359 Jy
! Clean residual min=-0.000789 max=0.000787 Jy/beam
! Clean residual mean=0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0446843 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 95 components and 0.0446843 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=8.51 mas, bpa=-12.59 degrees
! Estimated noise=9.99065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.52501e-05 Jy
! Component: 100  -  total flux cleaned = 9.91224e-05 Jy
! Component: 150  -  total flux cleaned = 6.81841e-05 Jy
! Component: 200  -  total flux cleaned = 3.74219e-05 Jy
! Total flux subtracted in 200 components = 3.74219e-05 Jy
! Clean residual min=-0.000494 max=0.000497 Jy/beam
! Clean residual mean=0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0447217 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.99114e-05 Jy
! Component: 100  -  total flux cleaned = -0.000179741 Jy
! Component: 150  -  total flux cleaned = -0.000239799 Jy
! Component: 200  -  total flux cleaned = -0.000360967 Jy
! Total flux subtracted in 200 components = -0.000360967 Jy
! Clean residual min=-0.000507 max=0.000509 Jy/beam
! Clean residual mean=0.000002 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.0443608 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 156 components and 0.0443608 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.33 mas, bmaj=8.349 mas, bpa=-13.56 degrees
! Estimated noise=9.90859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032276 Jy
! Component: 100  -  total flux cleaned = -0.000540243 Jy
! Component: 150  -  total flux cleaned = -0.000713187 Jy
! Component: 200  -  total flux cleaned = -0.000712374 Jy
! Total flux subtracted in 200 components = -0.000712374 Jy
! Clean residual min=-0.000448 max=0.000454 Jy/beam
! Clean residual mean=0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0436484 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 195 components and 0.0436484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058473Jy  sigma=0.053286
! Fit after  self-cal, rms=0.058548Jy  sigma=0.053221
wmodel /g0/scr/pima/npcsa_uvs/J1257+8342_X_map.mod
! Writing 195 model components to file: /g0/scr/pima/npcsa_uvs/J1257+8342_X_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1257+8342_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1257+8342_X_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1257+8342_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsa_uvs/J1257+8342_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.33 x 8.349 at -13.56 degrees (North through East)
! Clean map  min=-0.0026485  max=0.032396 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1257+8342_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0323956 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000178507 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.65306 1.65306 3.30613 6.61226 13.2245 26.449 52.8981
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.032 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1257+8342_X_uvs.log closed on Sun Oct  6 10:28:30 2013