! Started logfile: /g0/scr/pima/npcsa_uvs/J1257+8342_S_uvs.log on Sun Oct 6 10:33:19 2013 obs /g0/scr/pima/npcsa_uvs/J1257+8342_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1257+8342_S_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.67572 visibilities/baseline/integration-bin. ! Found source: J1257+8342 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6568 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1257+8342_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005673Jy sigma=0.753431 ! Fit after self-cal, rms=0.951256Jy sigma=0.677927 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=9.329 mas, bpa=8.113 degrees ! Estimated noise=28.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611181 Jy ! Component: 100 - total flux cleaned = 0.0742155 Jy ! Total flux subtracted in 100 components = 0.0742155 Jy ! Clean residual min=-0.007623 max=0.006944 Jy/beam ! Clean residual mean=0.000005 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.0742155 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0742155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117930Jy sigma=0.078147 ! Fit after self-cal, rms=0.116613Jy sigma=0.076826 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=10.25 mas, bpa=7.004 degrees ! Estimated noise=13.3649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701891 Jy ! Component: 100 - total flux cleaned = 0.0102338 Jy ! Component: 150 - total flux cleaned = 0.0120042 Jy ! Component: 200 - total flux cleaned = 0.0130126 Jy ! Total flux subtracted in 200 components = 0.0130126 Jy ! Clean residual min=-0.006852 max=0.004798 Jy/beam ! Clean residual mean=0.000011 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.0872281 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.0872281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117709Jy sigma=0.075205 ! Fit after self-cal, rms=0.117632Jy sigma=0.075185 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.09 HN 0.84 KP 0.90 ! LA 0.91 MK 0.75 NL 0.96 OV 0.90 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.87 KP 0.90 ! LA 0.80 MK 0.85 NL 0.80 OV 0.89 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 0.93 KP 0.86 ! LA 0.68 MK 0.95 NL 1.05 OV 0.87 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.91 HN 0.73 KP 0.81 ! LA 0.53 MK 0.96 NL 0.92 OV 0.93 ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.117632Jy sigma=0.075185 ! Fit after self-cal, rms=0.098072Jy sigma=0.071372 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=10.29 mas, bpa=6.79 degrees ! Estimated noise=10.3721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.014068 Jy ! Component: 100 - total flux cleaned = -0.0171374 Jy ! Component: 150 - total flux cleaned = -0.0180935 Jy ! Component: 200 - total flux cleaned = -0.0186198 Jy ! Total flux subtracted in 200 components = -0.0186198 Jy ! Clean residual min=-0.002925 max=0.002643 Jy/beam ! Clean residual mean=0.000006 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0686083 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.0686083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092991Jy sigma=0.073495 ! Fit after self-cal, rms=0.093215Jy sigma=0.073276 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093215Jy sigma=0.073276 ! Fit after self-cal, rms=0.078032Jy sigma=0.071037 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=10.29 mas, bpa=6.761 degrees ! Estimated noise=8.13701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109579 Jy ! Component: 100 - total flux cleaned = -0.0133521 Jy ! Component: 150 - total flux cleaned = -0.0141699 Jy ! Component: 200 - total flux cleaned = -0.0146487 Jy ! Total flux subtracted in 200 components = -0.0146487 Jy ! Clean residual min=-0.002370 max=0.002137 Jy/beam ! Clean residual mean=0.000005 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0539596 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0539596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074143Jy sigma=0.073159 ! Fit after self-cal, rms=0.074212Jy sigma=0.073129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300291 Jy ! Component: 100 - total flux cleaned = -0.000379085 Jy ! Component: 150 - total flux cleaned = -0.000419536 Jy ! Component: 200 - total flux cleaned = -0.000447471 Jy ! Total flux subtracted in 200 components = -0.000447471 Jy ! Clean residual min=-0.002357 max=0.002212 Jy/beam ! Clean residual mean=0.000005 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0535122 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0535122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074172Jy sigma=0.073189 ! Fit after self-cal, rms=0.074175Jy sigma=0.073186 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074175Jy sigma=0.073186 ! Fit after self-cal, rms=0.061347Jy sigma=0.070987 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=10.29 mas, bpa=6.839 degrees ! Estimated noise=6.35861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00855037 Jy ! Component: 100 - total flux cleaned = -0.0104214 Jy ! Component: 150 - total flux cleaned = -0.0110158 Jy ! Component: 200 - total flux cleaned = -0.0113464 Jy ! Total flux subtracted in 200 components = -0.0113464 Jy ! Clean residual min=-0.001832 max=0.001742 Jy/beam ! Clean residual mean=0.000004 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0421658 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0421658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058332Jy sigma=0.073114 ! Fit after self-cal, rms=0.058346Jy sigma=0.073112 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023584 Jy ! Component: 100 - total flux cleaned = -0.000261787 Jy ! Component: 150 - total flux cleaned = -0.000284278 Jy ! Component: 200 - total flux cleaned = -0.000304011 Jy ! Total flux subtracted in 200 components = -0.000304011 Jy ! Clean residual min=-0.001834 max=0.001743 Jy/beam ! Clean residual mean=0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0418618 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0418618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058323Jy sigma=0.073156 ! Fit after self-cal, rms=0.058326Jy sigma=0.073155 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058326Jy sigma=0.073155 ! Fit after self-cal, rms=0.048070Jy sigma=0.070980 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.196 mas, bmaj=12.63 mas, bpa=3.101 degrees ! Estimated noise=6.03476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00673047 Jy ! Component: 100 - total flux cleaned = -0.00820783 Jy ! Component: 150 - total flux cleaned = -0.00865897 Jy ! Component: 200 - total flux cleaned = -0.00885809 Jy ! Total flux subtracted in 200 components = -0.00885809 Jy ! Clean residual min=-0.001403 max=0.001396 Jy/beam ! Clean residual mean=0.000006 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0330037 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 82 components and 0.0330037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045750Jy sigma=0.073056 ! Fit after self-cal, rms=0.045749Jy sigma=0.073049 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132912 Jy ! Component: 100 - total flux cleaned = -0.000149397 Jy ! Component: 150 - total flux cleaned = -0.000156349 Jy ! Component: 200 - total flux cleaned = -0.000162585 Jy ! Total flux subtracted in 200 components = -0.000162585 Jy ! Clean residual min=-0.001426 max=0.001377 Jy/beam ! Clean residual mean=0.000006 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0328411 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.0328411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045744Jy sigma=0.073068 ! Fit after self-cal, rms=0.045746Jy sigma=0.073067 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=10.3 mas, bpa=6.939 degrees ! Estimated noise=4.96839 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.485 x 10.3 at 6.939 degrees (North through East) ! Clean map min=-0.0014426 max=0.029098 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=9.373 mas, bpa=7.89 degrees ! Estimated noise=10.6841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236664 Jy ! Component: 100 - total flux cleaned = 0.0288581 Jy ! Component: 150 - total flux cleaned = 0.030273 Jy ! Component: 200 - total flux cleaned = 0.030665 Jy ! Total flux subtracted in 200 components = 0.030665 Jy ! Clean residual min=-0.002710 max=0.002636 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.030665 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.030665 Jy ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=10.3 mas, bpa=6.939 degrees ! Estimated noise=4.96839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136157 Jy ! Component: 100 - total flux cleaned = 0.0015235 Jy ! Component: 150 - total flux cleaned = 0.00149863 Jy ! Component: 200 - total flux cleaned = 0.00149938 Jy ! Total flux subtracted in 200 components = 0.00149938 Jy ! Clean residual min=-0.001407 max=0.001311 Jy/beam ! Clean residual mean=0.000003 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0321644 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.0321644 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.196 mas, bmaj=12.63 mas, bpa=3.101 degrees ! Estimated noise=6.03476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242243 Jy ! Component: 100 - total flux cleaned = 0.000241849 Jy ! Component: 150 - total flux cleaned = 0.000267089 Jy ! Component: 200 - total flux cleaned = 0.000288771 Jy ! Total flux subtracted in 200 components = 0.000288771 Jy ! Clean residual min=-0.001329 max=0.001320 Jy/beam ! Clean residual mean=0.000005 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0324532 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.88653e-05 Jy ! Component: 100 - total flux cleaned = 3.60735e-05 Jy ! Component: 150 - total flux cleaned = 5.24719e-05 Jy ! Component: 200 - total flux cleaned = 6.79059e-05 Jy ! Total flux subtracted in 200 components = 6.79059e-05 Jy ! Clean residual min=-0.001288 max=0.001292 Jy/beam ! Clean residual mean=0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0325211 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 81 components and 0.0325211 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=10.3 mas, bpa=6.939 degrees ! Estimated noise=4.96839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104783 Jy ! Component: 100 - total flux cleaned = -0.000189906 Jy ! Component: 150 - total flux cleaned = -0.000189866 Jy ! Component: 200 - total flux cleaned = -0.000190232 Jy ! Total flux subtracted in 200 components = -0.000190232 Jy ! Clean residual min=-0.001311 max=0.001283 Jy/beam ! Clean residual mean=0.000003 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.0323308 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.0323308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045678Jy sigma=0.073132 ! Fit after self-cal, rms=0.045642Jy sigma=0.073093 wmodel /g0/scr/pima/npcsa_uvs/J1257+8342_S_map.mod ! Writing 95 model components to file: /g0/scr/pima/npcsa_uvs/J1257+8342_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1257+8342_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1257+8342_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1257+8342_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1257+8342_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140863 Jy ! Component: 100 - total flux cleaned = -0.000356541 Jy ! Component: 150 - total flux cleaned = -0.000476424 Jy ! Component: 200 - total flux cleaned = -0.000589255 Jy ! Component: 250 - total flux cleaned = -0.000589002 Jy ! Component: 300 - total flux cleaned = -0.000554567 Jy ! Component: 350 - total flux cleaned = -0.000471458 Jy ! Component: 400 - total flux cleaned = -0.000407363 Jy ! Component: 450 - total flux cleaned = -0.000423153 Jy ! Component: 500 - total flux cleaned = -0.000453332 Jy ! Component: 550 - total flux cleaned = -0.000394904 Jy ! Component: 600 - total flux cleaned = -0.000394919 Jy ! Component: 650 - total flux cleaned = -0.000338981 Jy ! Component: 700 - total flux cleaned = -0.000297744 Jy ! Component: 750 - total flux cleaned = -0.000204096 Jy ! Component: 800 - total flux cleaned = -0.000138612 Jy ! Component: 850 - total flux cleaned = -9.99512e-05 Jy ! Component: 900 - total flux cleaned = -2.38764e-05 Jy ! Component: 950 - total flux cleaned = 6.31334e-05 Jy ! Component: 1000 - total flux cleaned = 0.0001363 Jy ! Component: 1050 - total flux cleaned = 0.000208004 Jy ! Component: 1100 - total flux cleaned = 0.000243406 Jy ! Component: 1150 - total flux cleaned = 0.000313232 Jy ! Component: 1200 - total flux cleaned = 0.000404731 Jy ! Component: 1250 - total flux cleaned = 0.000494771 Jy ! Component: 1300 - total flux cleaned = 0.000583655 Jy ! Component: 1350 - total flux cleaned = 0.000682186 Jy ! Component: 1400 - total flux cleaned = 0.000768556 Jy ! Component: 1450 - total flux cleaned = 0.000821894 Jy ! Component: 1500 - total flux cleaned = 0.000864272 Jy ! Component: 1550 - total flux cleaned = 0.000926938 Jy ! Component: 1600 - total flux cleaned = 0.000947449 Jy ! Component: 1650 - total flux cleaned = 0.000988462 Jy ! Component: 1700 - total flux cleaned = 0.000998634 Jy ! Component: 1750 - total flux cleaned = 0.00102879 Jy ! Component: 1800 - total flux cleaned = 0.00108859 Jy ! Component: 1850 - total flux cleaned = 0.00109847 Jy ! Component: 1900 - total flux cleaned = 0.00114748 Jy ! Component: 1950 - total flux cleaned = 0.00117656 Jy ! Component: 2000 - total flux cleaned = 0.00118608 Jy ! Component: 2050 - total flux cleaned = 0.00121481 Jy ! Component: 2100 - total flux cleaned = 0.00125267 Jy ! Component: 2150 - total flux cleaned = 0.00128084 Jy ! Component: 2200 - total flux cleaned = 0.00132746 Jy ! Component: 2250 - total flux cleaned = 0.00138299 Jy ! Component: 2300 - total flux cleaned = 0.00143805 Jy ! Component: 2350 - total flux cleaned = 0.00148368 Jy ! Component: 2400 - total flux cleaned = 0.00152894 Jy ! Component: 2450 - total flux cleaned = 0.00158288 Jy ! Component: 2500 - total flux cleaned = 0.00163644 Jy ! Component: 2550 - total flux cleaned = 0.00171612 Jy ! Component: 2600 - total flux cleaned = 0.00174246 Jy ! Component: 2650 - total flux cleaned = 0.00179495 Jy ! Component: 2700 - total flux cleaned = 0.00180367 Jy ! Component: 2750 - total flux cleaned = 0.00183823 Jy ! Component: 2800 - total flux cleaned = 0.0018984 Jy ! Component: 2850 - total flux cleaned = 0.00188988 Jy ! Component: 2900 - total flux cleaned = 0.00194089 Jy ! Component: 2950 - total flux cleaned = 0.00195778 Jy ! Component: 3000 - total flux cleaned = 0.00198298 Jy ! Component: 3050 - total flux cleaned = 0.00199136 Jy ! Component: 3100 - total flux cleaned = 0.00200796 Jy ! Component: 3150 - total flux cleaned = 0.00200794 Jy ! Component: 3200 - total flux cleaned = 0.00204915 Jy ! Component: 3250 - total flux cleaned = 0.00206549 Jy ! Component: 3300 - total flux cleaned = 0.00208996 Jy ! Component: 3350 - total flux cleaned = 0.00210612 Jy ! Component: 3400 - total flux cleaned = 0.00213843 Jy ! Component: 3450 - total flux cleaned = 0.00215454 Jy ! Component: 3500 - total flux cleaned = 0.00220262 Jy ! Component: 3550 - total flux cleaned = 0.00222652 Jy ! Component: 3600 - total flux cleaned = 0.00225832 Jy ! Component: 3650 - total flux cleaned = 0.00227407 Jy ! Component: 3700 - total flux cleaned = 0.00230558 Jy ! Component: 3750 - total flux cleaned = 0.00232126 Jy ! Component: 3800 - total flux cleaned = 0.00235257 Jy ! Component: 3850 - total flux cleaned = 0.00238377 Jy ! Component: 3900 - total flux cleaned = 0.00240707 Jy ! Component: 3950 - total flux cleaned = 0.00244582 Jy ! Component: 4000 - total flux cleaned = 0.00247666 Jy ! Component: 4050 - total flux cleaned = 0.00249973 Jy ! Total flux subtracted in 4096 components = 0.00253046 Jy ! Clean residual min=-0.000423 max=0.000447 Jy/beam ! Clean residual mean=0.000001 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.0348613 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 348 components and 0.0348613 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1257+8342_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.485 x 10.3 at 6.939 degrees (North through East) ! Clean map min=-0.0010969 max=0.029222 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1257+8342_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0292217 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132091 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.35609 1.35609 2.71218 5.42436 10.8487 21.6975 43.3949 86.7898 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.029 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1257+8342_S_uvs.log closed on Sun Oct 6 10:33:23 2013