! Started logfile: /g0/scr/pima/npcsa_uvs/J1157+8118_S_uvs.log on Sun Oct 6 10:33:04 2013 obs /g0/scr/pima/npcsa_uvs/J1157+8118_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1157+8118_S_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.659394 visibilities/baseline/integration-bin. ! Found source: J1157+8118 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6528 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1157+8118_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.055899Jy sigma=2.324716 ! Fit after self-cal, rms=0.832445Jy sigma=1.226841 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=11.01 mas, bpa=5.846 degrees ! Estimated noise=15.6013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186435 Jy ! Component: 100 - total flux cleaned = 0.269906 Jy ! Total flux subtracted in 100 components = 0.269906 Jy ! Clean residual min=-0.044521 max=0.060658 Jy/beam ! Clean residual mean=-0.000096 rms=0.015189 Jy/beam ! Combined flux in latest and established models = 0.269906 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.269906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163765Jy sigma=0.498415 ! Fit after self-cal, rms=0.162359Jy sigma=0.497918 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.751 mas, bmaj=12.21 mas, bpa=8.102 degrees ! Estimated noise=5.42701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107247 Jy ! Component: 100 - total flux cleaned = 0.160333 Jy ! Component: 150 - total flux cleaned = 0.189185 Jy ! Component: 200 - total flux cleaned = 0.205978 Jy ! Total flux subtracted in 200 components = 0.205978 Jy ! Clean residual min=-0.048003 max=0.049011 Jy/beam ! Clean residual mean=0.000075 rms=0.016617 Jy/beam ! Combined flux in latest and established models = 0.475884 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 95 components and 0.475884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147923Jy sigma=0.303283 ! Fit after self-cal, rms=0.146577Jy sigma=0.302117 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.91 HN 3.46 KP 0.93 ! LA 0.95 MK 0.31 NL 2.14 OV 1.15 ! PT 1.04 SC 0.28 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.94 HN 2.94 KP 0.92 ! LA 0.97 MK 0.43 NL 2.02 OV 1.16 ! PT 0.97 SC 0.34 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.92 HN 1.58 KP 0.98 ! LA 0.79 MK 0.57 NL 2.10 OV 1.19 ! PT 1.07 SC 0.62 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.92 HN 0.95 KP 0.90 ! LA 0.71 MK 0.53 NL 1.82 OV 1.02 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.146577Jy sigma=0.302117 ! Fit after self-cal, rms=0.176423Jy sigma=0.249420 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.464 mas, bmaj=12.78 mas, bpa=12.61 degrees ! Estimated noise=4.90434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0218254 Jy ! Component: 100 - total flux cleaned = -0.0290575 Jy ! Component: 150 - total flux cleaned = -0.02921 Jy ! Component: 200 - total flux cleaned = -0.0293417 Jy ! Total flux subtracted in 200 components = -0.0293417 Jy ! Clean residual min=-0.032331 max=0.046875 Jy/beam ! Clean residual mean=0.000082 rms=0.012499 Jy/beam ! Combined flux in latest and established models = 0.446542 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.446542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171036Jy sigma=0.255297 ! Fit after self-cal, rms=0.172229Jy sigma=0.254861 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172229Jy sigma=0.254861 ! Fit after self-cal, rms=0.164276Jy sigma=0.247374 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.385 mas, bmaj=12.68 mas, bpa=12.6 degrees ! Estimated noise=4.50955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0185645 Jy ! Component: 100 - total flux cleaned = -0.0251782 Jy ! Component: 150 - total flux cleaned = -0.0280784 Jy ! Component: 200 - total flux cleaned = -0.0284871 Jy ! Total flux subtracted in 200 components = -0.0284871 Jy ! Clean residual min=-0.028409 max=0.042233 Jy/beam ! Clean residual mean=0.000075 rms=0.011384 Jy/beam ! Combined flux in latest and established models = 0.418055 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 118 components and 0.418055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159602Jy sigma=0.253691 ! Fit after self-cal, rms=0.159211Jy sigma=0.253505 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000842312 Jy ! Component: 100 - total flux cleaned = -0.000952875 Jy ! Component: 150 - total flux cleaned = -0.000951974 Jy ! Component: 200 - total flux cleaned = -0.000878395 Jy ! Total flux subtracted in 200 components = -0.000878395 Jy ! Clean residual min=-0.028054 max=0.042491 Jy/beam ! Clean residual mean=0.000074 rms=0.011379 Jy/beam ! Combined flux in latest and established models = 0.417177 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 128 components and 0.417177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159083Jy sigma=0.253637 ! Fit after self-cal, rms=0.158811Jy sigma=0.253543 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158811Jy sigma=0.253543 ! Fit after self-cal, rms=0.146310Jy sigma=0.245929 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.284 mas, bmaj=12.63 mas, bpa=12.59 degrees ! Estimated noise=4.14016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0160522 Jy ! Component: 100 - total flux cleaned = -0.0224023 Jy ! Component: 150 - total flux cleaned = -0.0257493 Jy ! Component: 200 - total flux cleaned = -0.0271955 Jy ! Total flux subtracted in 200 components = -0.0271955 Jy ! Clean residual min=-0.025270 max=0.038518 Jy/beam ! Clean residual mean=0.000067 rms=0.010345 Jy/beam ! Combined flux in latest and established models = 0.389981 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 129 components and 0.389981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142126Jy sigma=0.252021 ! Fit after self-cal, rms=0.141718Jy sigma=0.251764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113503 Jy ! Component: 100 - total flux cleaned = -0.00113504 Jy ! Component: 150 - total flux cleaned = -0.00113376 Jy ! Component: 200 - total flux cleaned = -0.00120055 Jy ! Total flux subtracted in 200 components = -0.00120055 Jy ! Clean residual min=-0.025396 max=0.038725 Jy/beam ! Clean residual mean=0.000066 rms=0.010356 Jy/beam ! Combined flux in latest and established models = 0.38878 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 0.38878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141549Jy sigma=0.252083 ! Fit after self-cal, rms=0.141432Jy sigma=0.252005 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141432Jy sigma=0.252005 ! Fit after self-cal, rms=0.134344Jy sigma=0.244578 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.23 mas, bmaj=16.24 mas, bpa=37.49 degrees ! Estimated noise=3.4754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0161137 Jy ! Component: 100 - total flux cleaned = -0.0217996 Jy ! Component: 150 - total flux cleaned = -0.0227582 Jy ! Component: 200 - total flux cleaned = -0.0228549 Jy ! Total flux subtracted in 200 components = -0.0228549 Jy ! Clean residual min=-0.028614 max=0.045457 Jy/beam ! Clean residual mean=0.000095 rms=0.012677 Jy/beam ! Combined flux in latest and established models = 0.365925 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 140 components and 0.365925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131666Jy sigma=0.249373 ! Fit after self-cal, rms=0.131288Jy sigma=0.248501 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013081 Jy ! Component: 100 - total flux cleaned = -3.14218e-05 Jy ! Component: 150 - total flux cleaned = -3.5221e-05 Jy ! Component: 200 - total flux cleaned = -0.000120689 Jy ! Total flux subtracted in 200 components = -0.000120689 Jy ! Clean residual min=-0.028483 max=0.045550 Jy/beam ! Clean residual mean=0.000095 rms=0.012643 Jy/beam ! Combined flux in latest and established models = 0.365805 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 143 components and 0.365805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131786Jy sigma=0.248392 ! Fit after self-cal, rms=0.132027Jy sigma=0.248294 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.22 mas, bmaj=12.59 mas, bpa=12.5 degrees ! Estimated noise=3.82524 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.22 x 12.59 at 12.5 degrees (North through East) ! Clean map min=-0.02202 max=0.18344 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=11.83 mas, bpa=9.799 degrees ! Estimated noise=10.5237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12915 Jy ! Component: 100 - total flux cleaned = 0.197803 Jy ! Component: 150 - total flux cleaned = 0.24246 Jy ! Component: 200 - total flux cleaned = 0.272773 Jy ! Total flux subtracted in 200 components = 0.272773 Jy ! Clean residual min=-0.022024 max=0.023802 Jy/beam ! Clean residual mean=-0.000035 rms=0.007108 Jy/beam ! Combined flux in latest and established models = 0.272773 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.272773 Jy ! Inverting map and beam ! Estimated beam: bmin=5.22 mas, bmaj=12.59 mas, bpa=12.5 degrees ! Estimated noise=3.82524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429434 Jy ! Component: 100 - total flux cleaned = 0.0643979 Jy ! Component: 150 - total flux cleaned = 0.0758924 Jy ! Component: 200 - total flux cleaned = 0.0818918 Jy ! Total flux subtracted in 200 components = 0.0818918 Jy ! Clean residual min=-0.025104 max=0.037189 Jy/beam ! Clean residual mean=0.000048 rms=0.009762 Jy/beam ! Combined flux in latest and established models = 0.354665 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 109 components and 0.354665 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.23 mas, bmaj=16.24 mas, bpa=37.49 degrees ! Estimated noise=3.4754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555514 Jy ! Component: 100 - total flux cleaned = 0.00624363 Jy ! Component: 150 - total flux cleaned = 0.00702502 Jy ! Component: 200 - total flux cleaned = 0.00769146 Jy ! Total flux subtracted in 200 components = 0.00769146 Jy ! Clean residual min=-0.029476 max=0.046446 Jy/beam ! Clean residual mean=0.000086 rms=0.012738 Jy/beam ! Combined flux in latest and established models = 0.362356 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000573657 Jy ! Component: 100 - total flux cleaned = 0.0010708 Jy ! Component: 150 - total flux cleaned = 0.00150791 Jy ! Component: 200 - total flux cleaned = 0.00188669 Jy ! Total flux subtracted in 200 components = 0.00188669 Jy ! Clean residual min=-0.028706 max=0.046037 Jy/beam ! Clean residual mean=0.000091 rms=0.012617 Jy/beam ! Combined flux in latest and established models = 0.364243 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 112 components and 0.364243 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.22 mas, bmaj=12.59 mas, bpa=12.5 degrees ! Estimated noise=3.82524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256497 Jy ! Component: 100 - total flux cleaned = -0.00301571 Jy ! Component: 150 - total flux cleaned = -0.00313607 Jy ! Component: 200 - total flux cleaned = -0.00305149 Jy ! Total flux subtracted in 200 components = -0.00305149 Jy ! Clean residual min=-0.023031 max=0.035568 Jy/beam ! Clean residual mean=0.000059 rms=0.009439 Jy/beam ! Combined flux in latest and established models = 0.361191 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 126 components and 0.361192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131617Jy sigma=0.250921 ! Fit after self-cal, rms=0.131865Jy sigma=0.250594 wmodel /g0/scr/pima/npcsa_uvs/J1157+8118_S_map.mod ! Writing 126 model components to file: /g0/scr/pima/npcsa_uvs/J1157+8118_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1157+8118_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1157+8118_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1157+8118_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J1157+8118_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.014211 Jy ! Component: 100 - total flux cleaned = 0.0250155 Jy ! Component: 150 - total flux cleaned = 0.0286529 Jy ! Component: 200 - total flux cleaned = 0.0318157 Jy ! Component: 250 - total flux cleaned = 0.0351872 Jy ! Component: 300 - total flux cleaned = 0.0382435 Jy ! Component: 350 - total flux cleaned = 0.0412708 Jy ! Component: 400 - total flux cleaned = 0.0444849 Jy ! Component: 450 - total flux cleaned = 0.047633 Jy ! Component: 500 - total flux cleaned = 0.0503534 Jy ! Component: 550 - total flux cleaned = 0.0527095 Jy ! Component: 600 - total flux cleaned = 0.0545873 Jy ! Component: 650 - total flux cleaned = 0.0564906 Jy ! Component: 700 - total flux cleaned = 0.058276 Jy ! Component: 750 - total flux cleaned = 0.0600815 Jy ! Component: 800 - total flux cleaned = 0.0615397 Jy ! Component: 850 - total flux cleaned = 0.0633683 Jy ! Component: 900 - total flux cleaned = 0.064661 Jy ! Component: 950 - total flux cleaned = 0.0653765 Jy ! Component: 1000 - total flux cleaned = 0.0659609 Jy ! Component: 1050 - total flux cleaned = 0.0662403 Jy ! Component: 1100 - total flux cleaned = 0.0669485 Jy ! Component: 1150 - total flux cleaned = 0.0673719 Jy ! Component: 1200 - total flux cleaned = 0.0677043 Jy ! Component: 1250 - total flux cleaned = 0.0681786 Jy ! Component: 1300 - total flux cleaned = 0.0685595 Jy ! Component: 1350 - total flux cleaned = 0.0688544 Jy ! Component: 1400 - total flux cleaned = 0.0689965 Jy ! Component: 1450 - total flux cleaned = 0.0689965 Jy ! Component: 1500 - total flux cleaned = 0.0691996 Jy ! Component: 1550 - total flux cleaned = 0.0691975 Jy ! Component: 1600 - total flux cleaned = 0.0691331 Jy ! Component: 1650 - total flux cleaned = 0.0691948 Jy ! Component: 1700 - total flux cleaned = 0.0691334 Jy ! Component: 1750 - total flux cleaned = 0.0690746 Jy ! Component: 1800 - total flux cleaned = 0.0690752 Jy ! Component: 1850 - total flux cleaned = 0.0690745 Jy ! Component: 1900 - total flux cleaned = 0.0689062 Jy ! Component: 1950 - total flux cleaned = 0.0686858 Jy ! Component: 2000 - total flux cleaned = 0.0684695 Jy ! Component: 2050 - total flux cleaned = 0.0683103 Jy ! Component: 2100 - total flux cleaned = 0.0681526 Jy ! Component: 2150 - total flux cleaned = 0.0679457 Jy ! Component: 2200 - total flux cleaned = 0.0676893 Jy ! Component: 2250 - total flux cleaned = 0.0673856 Jy ! Component: 2300 - total flux cleaned = 0.0671856 Jy ! Component: 2350 - total flux cleaned = 0.0669878 Jy ! Component: 2400 - total flux cleaned = 0.0669386 Jy ! Component: 2450 - total flux cleaned = 0.0668412 Jy ! Component: 2500 - total flux cleaned = 0.0667446 Jy ! Component: 2550 - total flux cleaned = 0.0666009 Jy ! Component: 2600 - total flux cleaned = 0.0664574 Jy ! Component: 2650 - total flux cleaned = 0.0663143 Jy ! Component: 2700 - total flux cleaned = 0.0660293 Jy ! Component: 2750 - total flux cleaned = 0.0658868 Jy ! Component: 2800 - total flux cleaned = 0.0656495 Jy ! Component: 2850 - total flux cleaned = 0.0655071 Jy ! Component: 2900 - total flux cleaned = 0.0652692 Jy ! Component: 2950 - total flux cleaned = 0.0652693 Jy ! Component: 3000 - total flux cleaned = 0.0651742 Jy ! Component: 3050 - total flux cleaned = 0.0651265 Jy ! Component: 3100 - total flux cleaned = 0.0652226 Jy ! Component: 3150 - total flux cleaned = 0.065223 Jy ! Component: 3200 - total flux cleaned = 0.0652715 Jy ! Component: 3250 - total flux cleaned = 0.0654171 Jy ! Component: 3300 - total flux cleaned = 0.065466 Jy ! Component: 3350 - total flux cleaned = 0.0655152 Jy ! Component: 3400 - total flux cleaned = 0.0656134 Jy ! Component: 3450 - total flux cleaned = 0.0657125 Jy ! Component: 3500 - total flux cleaned = 0.0657621 Jy ! Component: 3550 - total flux cleaned = 0.0658628 Jy ! Component: 3600 - total flux cleaned = 0.066014 Jy ! Component: 3650 - total flux cleaned = 0.066166 Jy ! Component: 3700 - total flux cleaned = 0.0663185 Jy ! Component: 3750 - total flux cleaned = 0.0663699 Jy ! Component: 3800 - total flux cleaned = 0.0665758 Jy ! Component: 3850 - total flux cleaned = 0.0667313 Jy ! Component: 3900 - total flux cleaned = 0.0667838 Jy ! Component: 3950 - total flux cleaned = 0.066889 Jy ! Component: 4000 - total flux cleaned = 0.0669945 Jy ! Component: 4050 - total flux cleaned = 0.0671006 Jy ! Total flux subtracted in 4096 components = 0.0673698 Jy ! Clean residual min=-0.003139 max=0.002910 Jy/beam ! Clean residual mean=0.000029 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.428561 Jy keep ! Adding 445 model components to the UV plane model. ! The established model now contains 569 components and 0.428562 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1157+8118_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.22 x 12.59 at 12.5 degrees (North through East) ! Clean map min=-0.0059427 max=0.17864 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1157+8118_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.178639 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110872 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.86195 1.86195 3.7239 7.4478 14.8956 29.7912 59.5824 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.178 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1157+8118_S_uvs.log closed on Sun Oct 6 10:33:08 2013