! Started logfile: /g0/scr/pima/npcsa_uvs/J1119+8048_S_uvs.log on Sun Oct  6 10:32:53 2013
obs /g0/scr/pima/npcsa_uvs/J1119+8048_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1119+8048_S_uva.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.733333 visibilities/baseline/integration-bin.
! Found source: J1119+8048
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7128 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1119+8048_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.006563Jy  sigma=0.792224
! Fit after  self-cal, rms=0.945877Jy  sigma=0.701358
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.759 mas, bmaj=14.52 mas, bpa=20.62 degrees
! Estimated noise=22.5633 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0661926 Jy
! Component: 100  -  total flux cleaned = 0.0808387 Jy
! Total flux subtracted in 100 components = 0.0808387 Jy
! Clean residual min=-0.009116 max=0.006828 Jy/beam
! Clean residual mean=-0.000010 rms=0.002108 Jy/beam
! Combined flux in latest and established models = 0.0808387 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0808387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095439Jy  sigma=0.082317
! Fit after  self-cal, rms=0.093331Jy  sigma=0.081011
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.752 mas, bmaj=13.31 mas, bpa=20.07 degrees
! Estimated noise=11.9972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0079475 Jy
! Component: 100  -  total flux cleaned = 0.0118725 Jy
! Component: 150  -  total flux cleaned = 0.0138074 Jy
! Component: 200  -  total flux cleaned = 0.0148398 Jy
! Total flux subtracted in 200 components = 0.0148398 Jy
! Clean residual min=-0.009660 max=0.005004 Jy/beam
! Clean residual mean=-0.000017 rms=0.001646 Jy/beam
! Combined flux in latest and established models = 0.0956785 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 36 components and 0.0956785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094857Jy  sigma=0.079088
! Fit after  self-cal, rms=0.094706Jy  sigma=0.079038
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.93     HN        0.68     KP        1.01     
!   LA        0.93     MK        0.80     NL        0.95     OV        0.93     
!   PT        0.95     SC        0.75     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.87     HN        0.84     KP        0.93     
!   LA        0.87     MK        0.82     NL        1.02     OV        0.93     
!   PT        0.93     SC        0.65     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.93     HN        0.90     KP        0.99     
!   LA        0.62     MK        1.12     NL        0.92     OV        0.98     
!   PT        1.12     SC        0.79     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.67     KP        0.84     
!   LA        0.55     MK        0.97     NL        0.95     OV        0.81     
!   PT        1.00     SC        0.79     
! 
! 
! Fit before self-cal, rms=0.094706Jy  sigma=0.079038
! Fit after  self-cal, rms=0.081182Jy  sigma=0.074089
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.75 mas, bmaj=13.49 mas, bpa=20.17 degrees
! Estimated noise=9.3819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0145679 Jy
! Component: 100  -  total flux cleaned = -0.0175097 Jy
! Component: 150  -  total flux cleaned = -0.0176728 Jy
! Component: 200  -  total flux cleaned = -0.0177094 Jy
! Total flux subtracted in 200 components = -0.0177094 Jy
! Clean residual min=-0.002362 max=0.002193 Jy/beam
! Clean residual mean=-0.000015 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0779691 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 42 components and 0.0779691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074051Jy  sigma=0.076355
! Fit after  self-cal, rms=0.074239Jy  sigma=0.076056
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074239Jy  sigma=0.076056
! Fit after  self-cal, rms=0.065083Jy  sigma=0.073639
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.733 mas, bmaj=13.51 mas, bpa=20.19 degrees
! Estimated noise=7.47588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.011461 Jy
! Component: 100  -  total flux cleaned = -0.013965 Jy
! Component: 150  -  total flux cleaned = -0.0143894 Jy
! Component: 200  -  total flux cleaned = -0.014485 Jy
! Total flux subtracted in 200 components = -0.014485 Jy
! Clean residual min=-0.001918 max=0.001843 Jy/beam
! Clean residual mean=-0.000012 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.063484 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.063484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059546Jy  sigma=0.075919
! Fit after  self-cal, rms=0.059605Jy  sigma=0.075906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.6709e-05 Jy
! Component: 100  -  total flux cleaned = -0.000101694 Jy
! Component: 150  -  total flux cleaned = -0.000158241 Jy
! Component: 200  -  total flux cleaned = -0.000208304 Jy
! Total flux subtracted in 200 components = -0.000208304 Jy
! Clean residual min=-0.001990 max=0.001832 Jy/beam
! Clean residual mean=-0.000012 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.0632757 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.0632757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059545Jy  sigma=0.075949
! Fit after  self-cal, rms=0.059537Jy  sigma=0.075945
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059537Jy  sigma=0.075945
! Fit after  self-cal, rms=0.051679Jy  sigma=0.073588
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.707 mas, bmaj=13.49 mas, bpa=20.17 degrees
! Estimated noise=5.93102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00904554 Jy
! Component: 100  -  total flux cleaned = -0.0110331 Jy
! Component: 150  -  total flux cleaned = -0.0117036 Jy
! Component: 200  -  total flux cleaned = -0.0119257 Jy
! Total flux subtracted in 200 components = -0.0119257 Jy
! Clean residual min=-0.001503 max=0.001458 Jy/beam
! Clean residual mean=-0.000010 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0513501 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.05135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047309Jy  sigma=0.075888
! Fit after  self-cal, rms=0.047281Jy  sigma=0.075869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.81972e-05 Jy
! Component: 100  -  total flux cleaned = -8.456e-06 Jy
! Component: 150  -  total flux cleaned = -6.54324e-05 Jy
! Component: 200  -  total flux cleaned = -0.000114816 Jy
! Total flux subtracted in 200 components = -0.000114816 Jy
! Clean residual min=-0.001540 max=0.001513 Jy/beam
! Clean residual mean=-0.000010 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.0512352 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 85 components and 0.0512352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047253Jy  sigma=0.075898
! Fit after  self-cal, rms=0.047232Jy  sigma=0.075884
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047232Jy  sigma=0.075884
! Fit after  self-cal, rms=0.040941Jy  sigma=0.073530
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.742 mas, bmaj=13.34 mas, bpa=21.92 degrees
! Estimated noise=5.58515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00724861 Jy
! Component: 100  -  total flux cleaned = -0.00885381 Jy
! Component: 150  -  total flux cleaned = -0.0094044 Jy
! Component: 200  -  total flux cleaned = -0.00955118 Jy
! Total flux subtracted in 200 components = -0.00955118 Jy
! Clean residual min=-0.001170 max=0.001379 Jy/beam
! Clean residual mean=-0.000013 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.0416841 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 94 components and 0.0416841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037474Jy  sigma=0.075873
! Fit after  self-cal, rms=0.037472Jy  sigma=0.075865
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.05488e-05 Jy
! Component: 100  -  total flux cleaned = -4.79722e-05 Jy
! Component: 150  -  total flux cleaned = -4.26001e-05 Jy
! Component: 200  -  total flux cleaned = -3.21144e-05 Jy
! Total flux subtracted in 200 components = -3.21144e-05 Jy
! Clean residual min=-0.001117 max=0.001399 Jy/beam
! Clean residual mean=-0.000013 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.0416519 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.0416519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037458Jy  sigma=0.075889
! Fit after  self-cal, rms=0.037461Jy  sigma=0.075886
! Inverting map 
! Added new window around map position (-0.5, 39).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126793 Jy
! Component: 100  -  total flux cleaned = 0.00157749 Jy
! Component: 150  -  total flux cleaned = 0.00181554 Jy
! Component: 200  -  total flux cleaned = 0.00193604 Jy
! Total flux subtracted in 200 components = 0.00193604 Jy
! Clean residual min=-0.001024 max=0.000962 Jy/beam
! Clean residual mean=-0.000010 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.043588 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 150 components and 0.043588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037441Jy  sigma=0.075821
! Fit after  self-cal, rms=0.037430Jy  sigma=0.075787
! Inverting map 
! Added new window around map position (106.5, 98.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109893 Jy
! Component: 100  -  total flux cleaned = 0.00180584 Jy
! Component: 150  -  total flux cleaned = 0.00226377 Jy
! Component: 200  -  total flux cleaned = 0.00242075 Jy
! Total flux subtracted in 200 components = 0.00242075 Jy
! Clean residual min=-0.000934 max=0.000844 Jy/beam
! Clean residual mean=-0.000006 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0460087 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 187 components and 0.0460088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037431Jy  sigma=0.075660
! Fit after  self-cal, rms=0.037431Jy  sigma=0.075636
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=13.48 mas, bpa=20.15 degrees
! Estimated noise=4.70269 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.684 x 13.48 at 20.15 degrees (North through East)
! Clean map  min=-0.0010789  max=0.034009 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.709 mas, bmaj=14.75 mas, bpa=20.5 degrees
! Estimated noise=8.64287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258514 Jy
! Component: 100  -  total flux cleaned = 0.0318169 Jy
! Component: 150  -  total flux cleaned = 0.0336149 Jy
! Component: 200  -  total flux cleaned = 0.0349526 Jy
! Total flux subtracted in 200 components = 0.0349526 Jy
! Clean residual min=-0.002561 max=0.002456 Jy/beam
! Clean residual mean=-0.000005 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.0349526 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.0349526 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=13.48 mas, bpa=20.15 degrees
! Estimated noise=4.70269 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026063 Jy
! Component: 100  -  total flux cleaned = 0.00453293 Jy
! Component: 150  -  total flux cleaned = 0.00605282 Jy
! Component: 200  -  total flux cleaned = 0.00720315 Jy
! Total flux subtracted in 200 components = 0.00720315 Jy
! Clean residual min=-0.001454 max=0.001259 Jy/beam
! Clean residual mean=-0.000008 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0421557 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 81 components and 0.0421557 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.742 mas, bmaj=13.34 mas, bpa=21.92 degrees
! Estimated noise=5.58515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135139 Jy
! Component: 100  -  total flux cleaned = 0.00228622 Jy
! Component: 150  -  total flux cleaned = 0.00290495 Jy
! Component: 200  -  total flux cleaned = 0.00326529 Jy
! Total flux subtracted in 200 components = 0.00326529 Jy
! Clean residual min=-0.001258 max=0.000767 Jy/beam
! Clean residual mean=-0.000008 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.045421 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216159 Jy
! Component: 100  -  total flux cleaned = 0.000386778 Jy
! Component: 150  -  total flux cleaned = 0.000540991 Jy
! Component: 200  -  total flux cleaned = 0.000682021 Jy
! Total flux subtracted in 200 components = 0.000682021 Jy
! Clean residual min=-0.001107 max=0.000727 Jy/beam
! Clean residual mean=-0.000007 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.046103 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 175 components and 0.046103 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.684 mas, bmaj=13.48 mas, bpa=20.15 degrees
! Estimated noise=4.70269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00047987 Jy
! Component: 100  -  total flux cleaned = 0.000507216 Jy
! Component: 150  -  total flux cleaned = 0.000460141 Jy
! Component: 200  -  total flux cleaned = 0.000482612 Jy
! Total flux subtracted in 200 components = 0.000482612 Jy
! Clean residual min=-0.001052 max=0.000886 Jy/beam
! Clean residual mean=-0.000004 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.0465857 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 200 components and 0.0465857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037321Jy  sigma=0.075708
! Fit after  self-cal, rms=0.037322Jy  sigma=0.075660
wmodel /g0/scr/pima/npcsa_uvs/J1119+8048_S_map.mod
! Writing 200 model components to file: /g0/scr/pima/npcsa_uvs/J1119+8048_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1119+8048_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1119+8048_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1119+8048_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsa_uvs/J1119+8048_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000460079 Jy
! Component: 100  -  total flux cleaned = -0.000667248 Jy
! Component: 150  -  total flux cleaned = -0.000754584 Jy
! Component: 200  -  total flux cleaned = -0.000754944 Jy
! Component: 250  -  total flux cleaned = -0.000688801 Jy
! Component: 300  -  total flux cleaned = -0.00063748 Jy
! Component: 350  -  total flux cleaned = -0.000561728 Jy
! Component: 400  -  total flux cleaned = -0.000450941 Jy
! Component: 450  -  total flux cleaned = -0.00040294 Jy
! Component: 500  -  total flux cleaned = -0.000332383 Jy
! Component: 550  -  total flux cleaned = -0.000309636 Jy
! Component: 600  -  total flux cleaned = -0.000298255 Jy
! Component: 650  -  total flux cleaned = -0.000231612 Jy
! Component: 700  -  total flux cleaned = -0.000199089 Jy
! Component: 750  -  total flux cleaned = -0.000188567 Jy
! Component: 800  -  total flux cleaned = -0.000177996 Jy
! Component: 850  -  total flux cleaned = -0.000146686 Jy
! Component: 900  -  total flux cleaned = -0.000136393 Jy
! Component: 950  -  total flux cleaned = -0.000116106 Jy
! Component: 1000  -  total flux cleaned = -8.59566e-05 Jy
! Component: 1050  -  total flux cleaned = -5.61747e-05 Jy
! Component: 1100  -  total flux cleaned = 2.64134e-06 Jy
! Component: 1150  -  total flux cleaned = 1.22206e-05 Jy
! Component: 1200  -  total flux cleaned = 3.1545e-05 Jy
! Component: 1250  -  total flux cleaned = 6.00261e-05 Jy
! Component: 1300  -  total flux cleaned = 7.88805e-05 Jy
! Component: 1350  -  total flux cleaned = 9.7512e-05 Jy
! Component: 1400  -  total flux cleaned = 0.00015263 Jy
! Component: 1450  -  total flux cleaned = 0.000170784 Jy
! Component: 1500  -  total flux cleaned = 0.000179845 Jy
! Component: 1550  -  total flux cleaned = 0.000233444 Jy
! Component: 1600  -  total flux cleaned = 0.000251046 Jy
! Component: 1650  -  total flux cleaned = 0.00031224 Jy
! Component: 1700  -  total flux cleaned = 0.000303479 Jy
! Component: 1750  -  total flux cleaned = 0.000312105 Jy
! Component: 1800  -  total flux cleaned = 0.000312151 Jy
! Component: 1850  -  total flux cleaned = 0.000363055 Jy
! Component: 1900  -  total flux cleaned = 0.000354595 Jy
! Component: 1950  -  total flux cleaned = 0.000346243 Jy
! Component: 2000  -  total flux cleaned = 0.000346294 Jy
! Component: 2050  -  total flux cleaned = 0.000346215 Jy
! Component: 2100  -  total flux cleaned = 0.000329796 Jy
! Component: 2150  -  total flux cleaned = 0.000329883 Jy
! Component: 2200  -  total flux cleaned = 0.000346072 Jy
! Component: 2250  -  total flux cleaned = 0.000354129 Jy
! Component: 2300  -  total flux cleaned = 0.000354205 Jy
! Component: 2350  -  total flux cleaned = 0.000378043 Jy
! Component: 2400  -  total flux cleaned = 0.000370078 Jy
! Component: 2450  -  total flux cleaned = 0.000362206 Jy
! Component: 2500  -  total flux cleaned = 0.000354423 Jy
! Component: 2550  -  total flux cleaned = 0.000354446 Jy
! Component: 2600  -  total flux cleaned = 0.000369977 Jy
! Component: 2650  -  total flux cleaned = 0.00036224 Jy
! Component: 2700  -  total flux cleaned = 0.000377602 Jy
! Component: 2750  -  total flux cleaned = 0.000354582 Jy
! Component: 2800  -  total flux cleaned = 0.000377462 Jy
! Component: 2850  -  total flux cleaned = 0.000369877 Jy
! Component: 2900  -  total flux cleaned = 0.000369943 Jy
! Component: 2950  -  total flux cleaned = 0.000369988 Jy
! Component: 3000  -  total flux cleaned = 0.000407506 Jy
! Component: 3050  -  total flux cleaned = 0.000407476 Jy
! Component: 3100  -  total flux cleaned = 0.000429813 Jy
! Component: 3150  -  total flux cleaned = 0.000429806 Jy
! Component: 3200  -  total flux cleaned = 0.000429807 Jy
! Component: 3250  -  total flux cleaned = 0.000474001 Jy
! Component: 3300  -  total flux cleaned = 0.000481335 Jy
! Component: 3350  -  total flux cleaned = 0.000466727 Jy
! Component: 3400  -  total flux cleaned = 0.00047401 Jy
! Component: 3450  -  total flux cleaned = 0.000488568 Jy
! Component: 3500  -  total flux cleaned = 0.00050302 Jy
! Component: 3550  -  total flux cleaned = 0.000503035 Jy
! Component: 3600  -  total flux cleaned = 0.000495851 Jy
! Component: 3650  -  total flux cleaned = 0.000495878 Jy
! Component: 3700  -  total flux cleaned = 0.000510186 Jy
! Component: 3750  -  total flux cleaned = 0.00051732 Jy
! Component: 3800  -  total flux cleaned = 0.000510243 Jy
! Component: 3850  -  total flux cleaned = 0.000517354 Jy
! Component: 3900  -  total flux cleaned = 0.000517395 Jy
! Component: 3950  -  total flux cleaned = 0.000503291 Jy
! Component: 4000  -  total flux cleaned = 0.000517333 Jy
! Component: 4050  -  total flux cleaned = 0.00053835 Jy
! Total flux subtracted in 4096 components = 0.000538366 Jy
! Clean residual min=-0.000406 max=0.000425 Jy/beam
! Clean residual mean=-0.000006 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.047124 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 454 components and 0.047124 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1119+8048_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.684 x 13.48 at 20.15 degrees (North through East)
! Clean map  min=-0.00085061  max=0.033454 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1119+8048_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.033454 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132417 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.18745 1.18745 2.37491 4.74982 9.49963 18.9993 37.9985 75.997
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.033 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1119+8048_S_uvs.log closed on Sun Oct  6 10:32:58 2013