! Started logfile: /g0/scr/pima/npcsa_uvs/J1104+7658_S_uvs.log on Sun Oct  6 10:32:49 2013
obs /g0/scr/pima/npcsa_uvs/J1104+7658_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1104+7658_S_uva.fits
! AN table 1: 55 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.555556 visibilities/baseline/integration-bin.
! Found source: J1104+7658
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4400 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1104+7658_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005212Jy  sigma=0.781195
! Fit after  self-cal, rms=0.946505Jy  sigma=0.692966
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.987 mas, bmaj=12.26 mas, bpa=50.82 degrees
! Estimated noise=43.697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0617398 Jy
! Component: 100  -  total flux cleaned = 0.0763788 Jy
! Total flux subtracted in 100 components = 0.0763788 Jy
! Clean residual min=-0.008429 max=0.008502 Jy/beam
! Clean residual mean=0.000013 rms=0.002594 Jy/beam
! Combined flux in latest and established models = 0.0763788 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0763788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085592Jy  sigma=0.072774
! Fit after  self-cal, rms=0.083766Jy  sigma=0.071565
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.803 mas, bmaj=13.29 mas, bpa=48.73 degrees
! Estimated noise=16.4093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00991184 Jy
! Component: 100  -  total flux cleaned = 0.0135257 Jy
! Component: 150  -  total flux cleaned = 0.0155593 Jy
! Component: 200  -  total flux cleaned = 0.0170479 Jy
! Total flux subtracted in 200 components = 0.0170479 Jy
! Clean residual min=-0.008432 max=0.005107 Jy/beam
! Clean residual mean=0.000003 rms=0.001774 Jy/beam
! Combined flux in latest and established models = 0.0934267 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.0934268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086417Jy  sigma=0.068501
! Fit after  self-cal, rms=0.086259Jy  sigma=0.068460
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.90     HN        1.00*    KP        0.88     
!   LA        1.01     MK        1.00*    NL        0.85     OV        1.00     
!   PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.01     HN        1.00*    KP        0.91     
!   LA        0.86     MK        1.00*    NL        0.90     OV        0.94     
!   PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00*    KP        0.92     
!   LA        0.63     MK        1.00*    NL        1.01     OV        0.93     
!   PT        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        0.86     HN        1.00*    KP        0.82     
!   LA        0.60     MK        1.00*    NL        0.90     OV        0.81     
!   PT        0.94     
! 
! 
! Fit before self-cal, rms=0.086259Jy  sigma=0.068460
! Fit after  self-cal, rms=0.074087Jy  sigma=0.063547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.794 mas, bmaj=13.4 mas, bpa=48.77 degrees
! Estimated noise=12.8143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0142374 Jy
! Component: 100  -  total flux cleaned = -0.0173432 Jy
! Component: 150  -  total flux cleaned = -0.0180635 Jy
! Component: 200  -  total flux cleaned = -0.0182189 Jy
! Total flux subtracted in 200 components = -0.0182189 Jy
! Clean residual min=-0.002046 max=0.002416 Jy/beam
! Clean residual mean=-0.000001 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.0752079 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 64 components and 0.0752079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066485Jy  sigma=0.066071
! Fit after  self-cal, rms=0.066758Jy  sigma=0.065904
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066758Jy  sigma=0.065904
! Fit after  self-cal, rms=0.058991Jy  sigma=0.063300
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.742 mas, bmaj=13.42 mas, bpa=49.17 degrees
! Estimated noise=10.1291 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0111975 Jy
! Component: 100  -  total flux cleaned = -0.0136567 Jy
! Component: 150  -  total flux cleaned = -0.0144555 Jy
! Component: 200  -  total flux cleaned = -0.0147522 Jy
! Total flux subtracted in 200 components = -0.0147522 Jy
! Clean residual min=-0.001736 max=0.002101 Jy/beam
! Clean residual mean=-0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.0604557 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 68 components and 0.0604557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053048Jy  sigma=0.065829
! Fit after  self-cal, rms=0.053085Jy  sigma=0.065817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.05264e-05 Jy
! Component: 100  -  total flux cleaned = -0.000133517 Jy
! Component: 150  -  total flux cleaned = -0.000134711 Jy
! Component: 200  -  total flux cleaned = -0.00011216 Jy
! Total flux subtracted in 200 components = -0.00011216 Jy
! Clean residual min=-0.001763 max=0.002047 Jy/beam
! Clean residual mean=-0.000001 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.0603436 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 0.0603435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053042Jy  sigma=0.065861
! Fit after  self-cal, rms=0.053058Jy  sigma=0.065853
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053058Jy  sigma=0.065853
! Fit after  self-cal, rms=0.046729Jy  sigma=0.063258
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.69 mas, bmaj=13.39 mas, bpa=49.59 degrees
! Estimated noise=8.0265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00862536 Jy
! Component: 100  -  total flux cleaned = -0.0105831 Jy
! Component: 150  -  total flux cleaned = -0.0113034 Jy
! Component: 200  -  total flux cleaned = -0.0116061 Jy
! Total flux subtracted in 200 components = -0.0116061 Jy
! Clean residual min=-0.001312 max=0.001554 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0487375 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 88 components and 0.0487375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042176Jy  sigma=0.065788
! Fit after  self-cal, rms=0.042171Jy  sigma=0.065770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.98937e-05 Jy
! Component: 100  -  total flux cleaned = -0.000104992 Jy
! Component: 150  -  total flux cleaned = -0.000124728 Jy
! Component: 200  -  total flux cleaned = -0.000130651 Jy
! Total flux subtracted in 200 components = -0.000130651 Jy
! Clean residual min=-0.001299 max=0.001538 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0486068 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.0486068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042142Jy  sigma=0.065808
! Fit after  self-cal, rms=0.042142Jy  sigma=0.065807
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042142Jy  sigma=0.065807
! Fit after  self-cal, rms=0.037094Jy  sigma=0.063210
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.64 mas, bmaj=14.06 mas, bpa=46.16 degrees
! Estimated noise=6.48948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00686816 Jy
! Component: 100  -  total flux cleaned = -0.00846097 Jy
! Component: 150  -  total flux cleaned = -0.00905081 Jy
! Component: 200  -  total flux cleaned = -0.00932662 Jy
! Total flux subtracted in 200 components = -0.00932662 Jy
! Clean residual min=-0.000954 max=0.001155 Jy/beam
! Clean residual mean=-0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.0392802 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.0392802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033490Jy  sigma=0.065726
! Fit after  self-cal, rms=0.033489Jy  sigma=0.065722
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.70607e-05 Jy
! Component: 100  -  total flux cleaned = -0.000151817 Jy
! Component: 150  -  total flux cleaned = -0.000169253 Jy
! Component: 200  -  total flux cleaned = -0.000176724 Jy
! Total flux subtracted in 200 components = -0.000176724 Jy
! Clean residual min=-0.000963 max=0.001139 Jy/beam
! Clean residual mean=-0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0391035 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 111 components and 0.0391035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033466Jy  sigma=0.065760
! Fit after  self-cal, rms=0.033467Jy  sigma=0.065759
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.646 mas, bmaj=13.37 mas, bpa=50 degrees
! Estimated noise=6.35718 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.646 x 13.37 at 50 degrees (North through East)
! Clean map  min=-0.0010243  max=0.032572 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.856 mas, bmaj=12.35 mas, bpa=52.63 degrees
! Estimated noise=17.2738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0249746 Jy
! Component: 100  -  total flux cleaned = 0.0317785 Jy
! Component: 150  -  total flux cleaned = 0.0347916 Jy
! Component: 200  -  total flux cleaned = 0.0362405 Jy
! Total flux subtracted in 200 components = 0.0362405 Jy
! Clean residual min=-0.002517 max=0.002324 Jy/beam
! Clean residual mean=0.000003 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.0362405 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0362405 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.646 mas, bmaj=13.37 mas, bpa=50 degrees
! Estimated noise=6.35718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013437 Jy
! Component: 100  -  total flux cleaned = 0.00187868 Jy
! Component: 150  -  total flux cleaned = 0.00209338 Jy
! Component: 200  -  total flux cleaned = 0.00223643 Jy
! Total flux subtracted in 200 components = 0.00223643 Jy
! Clean residual min=-0.001123 max=0.001384 Jy/beam
! Clean residual mean=-0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0384769 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 72 components and 0.0384769 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.64 mas, bmaj=14.06 mas, bpa=46.16 degrees
! Estimated noise=6.48948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131496 Jy
! Component: 100  -  total flux cleaned = 0.000212004 Jy
! Component: 150  -  total flux cleaned = 0.000263999 Jy
! Component: 200  -  total flux cleaned = 0.000270522 Jy
! Total flux subtracted in 200 components = 0.000270522 Jy
! Clean residual min=-0.001026 max=0.001294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.0387474 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.36855e-07 Jy
! Component: 100  -  total flux cleaned = 5.84878e-06 Jy
! Component: 150  -  total flux cleaned = 1.18753e-05 Jy
! Component: 200  -  total flux cleaned = 1.17345e-05 Jy
! Total flux subtracted in 200 components = 1.17345e-05 Jy
! Clean residual min=-0.001012 max=0.001266 Jy/beam
! Clean residual mean=-0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.0387592 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 98 components and 0.0387592 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.646 mas, bmaj=13.37 mas, bpa=50 degrees
! Estimated noise=6.35718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.53441e-05 Jy
! Component: 100  -  total flux cleaned = 4.57744e-05 Jy
! Component: 150  -  total flux cleaned = 3.30621e-05 Jy
! Component: 200  -  total flux cleaned = 2.11502e-05 Jy
! Total flux subtracted in 200 components = 2.11502e-05 Jy
! Clean residual min=-0.001063 max=0.001307 Jy/beam
! Clean residual mean=-0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0387803 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.0387803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033464Jy  sigma=0.065790
! Fit after  self-cal, rms=0.033455Jy  sigma=0.065786
wmodel /g0/scr/pima/npcsa_uvs/J1104+7658_S_map.mod
! Writing 109 model components to file: /g0/scr/pima/npcsa_uvs/J1104+7658_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1104+7658_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1104+7658_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1104+7658_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J1104+7658_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484474 Jy
! Component: 100  -  total flux cleaned = 0.000649263 Jy
! Component: 150  -  total flux cleaned = 0.000700008 Jy
! Component: 200  -  total flux cleaned = 0.00071505 Jy
! Component: 250  -  total flux cleaned = 0.00075767 Jy
! Component: 300  -  total flux cleaned = 0.000783779 Jy
! Component: 350  -  total flux cleaned = 0.000796282 Jy
! Component: 400  -  total flux cleaned = 0.00085554 Jy
! Component: 450  -  total flux cleaned = 0.000980508 Jy
! Component: 500  -  total flux cleaned = 0.00107883 Jy
! Component: 550  -  total flux cleaned = 0.00114168 Jy
! Component: 600  -  total flux cleaned = 0.00118213 Jy
! Component: 650  -  total flux cleaned = 0.00119192 Jy
! Component: 700  -  total flux cleaned = 0.00124889 Jy
! Component: 750  -  total flux cleaned = 0.00126713 Jy
! Component: 800  -  total flux cleaned = 0.00129421 Jy
! Component: 850  -  total flux cleaned = 0.001338 Jy
! Component: 900  -  total flux cleaned = 0.00137207 Jy
! Component: 950  -  total flux cleaned = 0.00138035 Jy
! Component: 1000  -  total flux cleaned = 0.00141295 Jy
! Component: 1050  -  total flux cleaned = 0.00144496 Jy
! Component: 1100  -  total flux cleaned = 0.00149979 Jy
! Component: 1150  -  total flux cleaned = 0.00155369 Jy
! Component: 1200  -  total flux cleaned = 0.00159165 Jy
! Component: 1250  -  total flux cleaned = 0.00164397 Jy
! Component: 1300  -  total flux cleaned = 0.00169571 Jy
! Component: 1350  -  total flux cleaned = 0.00175421 Jy
! Component: 1400  -  total flux cleaned = 0.00183376 Jy
! Component: 1450  -  total flux cleaned = 0.00186956 Jy
! Component: 1500  -  total flux cleaned = 0.00189804 Jy
! Component: 1550  -  total flux cleaned = 0.00194746 Jy
! Component: 1600  -  total flux cleaned = 0.00197547 Jy
! Component: 1650  -  total flux cleaned = 0.00198939 Jy
! Component: 1700  -  total flux cleaned = 0.00203105 Jy
! Component: 1750  -  total flux cleaned = 0.00203102 Jy
! Component: 1800  -  total flux cleaned = 0.00205167 Jy
! Component: 1850  -  total flux cleaned = 0.00208602 Jy
! Component: 1900  -  total flux cleaned = 0.00211335 Jy
! Component: 1950  -  total flux cleaned = 0.00213382 Jy
! Component: 2000  -  total flux cleaned = 0.00214739 Jy
! Component: 2050  -  total flux cleaned = 0.00218132 Jy
! Component: 2100  -  total flux cleaned = 0.00218132 Jy
! Component: 2150  -  total flux cleaned = 0.00218135 Jy
! Component: 2200  -  total flux cleaned = 0.00218809 Jy
! Component: 2250  -  total flux cleaned = 0.00218137 Jy
! Component: 2300  -  total flux cleaned = 0.00218135 Jy
! Component: 2350  -  total flux cleaned = 0.0021881 Jy
! Component: 2400  -  total flux cleaned = 0.00217468 Jy
! Component: 2450  -  total flux cleaned = 0.00220138 Jy
! Component: 2500  -  total flux cleaned = 0.00220135 Jy
! Component: 2550  -  total flux cleaned = 0.00221472 Jy
! Component: 2600  -  total flux cleaned = 0.00220803 Jy
! Component: 2650  -  total flux cleaned = 0.00222802 Jy
! Component: 2700  -  total flux cleaned = 0.00221468 Jy
! Component: 2750  -  total flux cleaned = 0.00220802 Jy
! Component: 2800  -  total flux cleaned = 0.00220805 Jy
! Component: 2850  -  total flux cleaned = 0.00220808 Jy
! Component: 2900  -  total flux cleaned = 0.00220148 Jy
! Component: 2950  -  total flux cleaned = 0.0022015 Jy
! Component: 3000  -  total flux cleaned = 0.0022214 Jy
! Component: 3050  -  total flux cleaned = 0.00219488 Jy
! Component: 3100  -  total flux cleaned = 0.00220148 Jy
! Component: 3150  -  total flux cleaned = 0.00221475 Jy
! Component: 3200  -  total flux cleaned = 0.00219486 Jy
! Component: 3250  -  total flux cleaned = 0.00221475 Jy
! Component: 3300  -  total flux cleaned = 0.00220813 Jy
! Component: 3350  -  total flux cleaned = 0.00220815 Jy
! Component: 3400  -  total flux cleaned = 0.0022081 Jy
! Component: 3450  -  total flux cleaned = 0.00222136 Jy
! Component: 3500  -  total flux cleaned = 0.00222799 Jy
! Component: 3550  -  total flux cleaned = 0.0022479 Jy
! Component: 3600  -  total flux cleaned = 0.00226121 Jy
! Component: 3650  -  total flux cleaned = 0.00225455 Jy
! Component: 3700  -  total flux cleaned = 0.00227452 Jy
! Component: 3750  -  total flux cleaned = 0.00227453 Jy
! Component: 3800  -  total flux cleaned = 0.00230114 Jy
! Component: 3850  -  total flux cleaned = 0.0023078 Jy
! Component: 3900  -  total flux cleaned = 0.00231448 Jy
! Component: 3950  -  total flux cleaned = 0.00232785 Jy
! Component: 4000  -  total flux cleaned = 0.00230775 Jy
! Component: 4050  -  total flux cleaned = 0.00232122 Jy
! Total flux subtracted in 4096 components = 0.00232798 Jy
! Clean residual min=-0.000381 max=0.000378 Jy/beam
! Clean residual mean=-0.000000 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0411083 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 380 components and 0.0411083 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1104+7658_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.646 x 13.37 at 50 degrees (North through East)
! Clean map  min=-0.00093839  max=0.032911 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1104+7658_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.032911 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000115779 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05538 1.05538 2.11076 4.22152 8.44304 16.8861 33.7722 67.5443
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.032 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1104+7658_S_uvs.log closed on Sun Oct  6 10:32:53 2013