! Started logfile: /g0/scr/pima/npcsa_uvs/J0919+7825_S_uvs.log on Sun Oct  6 10:32:23 2013
obs /g0/scr/pima/npcsa_uvs/J0919+7825_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0919+7825_S_uva.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0919+7825
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9720 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0919+7825_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.045495Jy  sigma=2.611599
! Fit after  self-cal, rms=0.662833Jy  sigma=1.582605
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.265 mas, bmaj=10.35 mas, bpa=12.73 degrees
! Estimated noise=6.27856 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.27542 Jy
! Component: 100  -  total flux cleaned = 0.335689 Jy
! Total flux subtracted in 100 components = 0.335689 Jy
! Clean residual min=-0.011926 max=0.018594 Jy/beam
! Clean residual mean=-0.000008 rms=0.003086 Jy/beam
! Combined flux in latest and established models = 0.33569 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.33569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108069Jy  sigma=0.275840
! Fit after  self-cal, rms=0.108060Jy  sigma=0.275831
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199617 Jy
! Component: 100  -  total flux cleaned = 0.0301328 Jy
! Total flux subtracted in 100 components = 0.0301328 Jy
! Clean residual min=-0.012454 max=0.009207 Jy/beam
! Clean residual mean=-0.000005 rms=0.002462 Jy/beam
! Combined flux in latest and established models = 0.365822 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.365822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105771Jy  sigma=0.258987
! Fit after  self-cal, rms=0.105778Jy  sigma=0.258951
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=10.69 mas, bpa=12.06 degrees
! Estimated noise=2.97024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911291 Jy
! Component: 100  -  total flux cleaned = 0.0146829 Jy
! Component: 150  -  total flux cleaned = 0.0183433 Jy
! Component: 200  -  total flux cleaned = 0.020787 Jy
! Total flux subtracted in 200 components = 0.020787 Jy
! Clean residual min=-0.012073 max=0.008272 Jy/beam
! Clean residual mean=-0.000001 rms=0.002313 Jy/beam
! Combined flux in latest and established models = 0.386609 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 47 components and 0.386609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105789Jy  sigma=0.254471
! Fit after  self-cal, rms=0.105797Jy  sigma=0.254452
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.98     HN        0.95     KP        0.97     
!   LA        1.10     MK        0.89     NL        1.00     OV        1.00     
!   PT        1.08     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        0.97     
!   LA        1.03     MK        0.95     NL        0.99     OV        1.01     
!   PT        1.02     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.00     KP        0.98     
!   LA        0.85     MK        1.07     NL        1.11     OV        1.03     
!   PT        1.11     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.94     KP        0.92     
!   LA        0.73     MK        1.09     NL        1.03     OV        0.86     
!   PT        0.96     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.105797Jy  sigma=0.254452
! Fit after  self-cal, rms=0.095186Jy  sigma=0.225206
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.074 mas, bmaj=10.69 mas, bpa=11.97 degrees
! Estimated noise=2.86626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00913155 Jy
! Component: 100  -  total flux cleaned = -0.0112075 Jy
! Component: 150  -  total flux cleaned = -0.0112991 Jy
! Component: 200  -  total flux cleaned = -0.0112677 Jy
! Total flux subtracted in 200 components = -0.0112677 Jy
! Clean residual min=-0.003129 max=0.003322 Jy/beam
! Clean residual mean=-0.000005 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.375342 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 60 components and 0.375342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092791Jy  sigma=0.227056
! Fit after  self-cal, rms=0.092862Jy  sigma=0.226941
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092862Jy  sigma=0.226941
! Fit after  self-cal, rms=0.092219Jy  sigma=0.225068
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=10.69 mas, bpa=11.95 degrees
! Estimated noise=2.77723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00881342 Jy
! Component: 100  -  total flux cleaned = -0.0107504 Jy
! Component: 150  -  total flux cleaned = -0.0108878 Jy
! Component: 200  -  total flux cleaned = -0.0109099 Jy
! Total flux subtracted in 200 components = -0.0109099 Jy
! Clean residual min=-0.002991 max=0.003206 Jy/beam
! Clean residual mean=-0.000004 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.364432 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.364432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089915Jy  sigma=0.226973
! Fit after  self-cal, rms=0.089917Jy  sigma=0.226970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.99571e-05 Jy
! Component: 100  -  total flux cleaned = -3.12216e-05 Jy
! Component: 150  -  total flux cleaned = 3.64286e-06 Jy
! Component: 200  -  total flux cleaned = 1.84212e-05 Jy
! Total flux subtracted in 200 components = 1.84212e-05 Jy
! Clean residual min=-0.002988 max=0.003190 Jy/beam
! Clean residual mean=-0.000004 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.36445 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.36445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089880Jy  sigma=0.227016
! Fit after  self-cal, rms=0.089881Jy  sigma=0.227013
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089881Jy  sigma=0.227013
! Fit after  self-cal, rms=0.089224Jy  sigma=0.225058
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.069 mas, bmaj=10.69 mas, bpa=11.95 degrees
! Estimated noise=2.68897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00850188 Jy
! Component: 100  -  total flux cleaned = -0.0103631 Jy
! Component: 150  -  total flux cleaned = -0.010871 Jy
! Component: 200  -  total flux cleaned = -0.0108856 Jy
! Total flux subtracted in 200 components = -0.0108856 Jy
! Clean residual min=-0.002893 max=0.003075 Jy/beam
! Clean residual mean=-0.000004 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.353564 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.353565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087001Jy  sigma=0.227008
! Fit after  self-cal, rms=0.087001Jy  sigma=0.227006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012188 Jy
! Component: 100  -  total flux cleaned = -9.53324e-05 Jy
! Component: 150  -  total flux cleaned = -7.36109e-05 Jy
! Component: 200  -  total flux cleaned = -5.32377e-05 Jy
! Total flux subtracted in 200 components = -5.32377e-05 Jy
! Clean residual min=-0.002895 max=0.003065 Jy/beam
! Clean residual mean=-0.000004 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.353511 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 87 components and 0.353511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086980Jy  sigma=0.227039
! Fit after  self-cal, rms=0.086981Jy  sigma=0.227038
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086981Jy  sigma=0.227038
! Fit after  self-cal, rms=0.086345Jy  sigma=0.225062
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.205 mas, bmaj=11.93 mas, bpa=11.39 degrees
! Estimated noise=3.17629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0082242 Jy
! Component: 100  -  total flux cleaned = -0.00994153 Jy
! Component: 150  -  total flux cleaned = -0.0101315 Jy
! Component: 200  -  total flux cleaned = -0.0102409 Jy
! Total flux subtracted in 200 components = -0.0102409 Jy
! Clean residual min=-0.003013 max=0.003832 Jy/beam
! Clean residual mean=-0.000008 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.34327 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 98 components and 0.34327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084254Jy  sigma=0.226920
! Fit after  self-cal, rms=0.084254Jy  sigma=0.226903
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.94231e-05 Jy
! Component: 100  -  total flux cleaned = -0.000207675 Jy
! Component: 150  -  total flux cleaned = -0.000282541 Jy
! Component: 200  -  total flux cleaned = -0.000303116 Jy
! Total flux subtracted in 200 components = -0.000303116 Jy
! Clean residual min=-0.002977 max=0.003707 Jy/beam
! Clean residual mean=-0.000009 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.342967 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 103 components and 0.342967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084249Jy  sigma=0.226965
! Fit after  self-cal, rms=0.084250Jy  sigma=0.226959
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=10.69 mas, bpa=11.94 degrees
! Estimated noise=2.60328 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.067 x 10.69 at 11.94 degrees (North through East)
! Clean map  min=-0.0026777  max=0.31621 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.265 mas, bmaj=10.35 mas, bpa=12.67 degrees
! Estimated noise=5.48096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.240381 Jy
! Component: 100  -  total flux cleaned = 0.293197 Jy
! Component: 150  -  total flux cleaned = 0.311442 Jy
! Component: 200  -  total flux cleaned = 0.320704 Jy
! Total flux subtracted in 200 components = 0.320704 Jy
! Clean residual min=-0.005489 max=0.005486 Jy/beam
! Clean residual mean=-0.000004 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.320704 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.320704 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=10.69 mas, bpa=11.94 degrees
! Estimated noise=2.60328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00865291 Jy
! Component: 100  -  total flux cleaned = 0.0134712 Jy
! Component: 150  -  total flux cleaned = 0.0165623 Jy
! Component: 200  -  total flux cleaned = 0.0186026 Jy
! Total flux subtracted in 200 components = 0.0186026 Jy
! Clean residual min=-0.003046 max=0.003116 Jy/beam
! Clean residual mean=-0.000007 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.339306 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 51 components and 0.339306 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.205 mas, bmaj=11.93 mas, bpa=11.39 degrees
! Estimated noise=3.17629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242707 Jy
! Component: 100  -  total flux cleaned = 0.00297096 Jy
! Component: 150  -  total flux cleaned = 0.00313778 Jy
! Component: 200  -  total flux cleaned = 0.00325911 Jy
! Total flux subtracted in 200 components = 0.00325911 Jy
! Clean residual min=-0.003069 max=0.003779 Jy/beam
! Clean residual mean=-0.000010 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.342565 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.38452e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101646 Jy
! Component: 150  -  total flux cleaned = 0.000113207 Jy
! Component: 200  -  total flux cleaned = 0.000133579 Jy
! Total flux subtracted in 200 components = 0.000133579 Jy
! Clean residual min=-0.003010 max=0.003741 Jy/beam
! Clean residual mean=-0.000009 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.342699 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 71 components and 0.342699 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=10.69 mas, bpa=11.94 degrees
! Estimated noise=2.60328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000553342 Jy
! Component: 100  -  total flux cleaned = -0.000551035 Jy
! Component: 150  -  total flux cleaned = -0.000467129 Jy
! Component: 200  -  total flux cleaned = -0.000417487 Jy
! Total flux subtracted in 200 components = -0.000417487 Jy
! Clean residual min=-0.002834 max=0.002936 Jy/beam
! Clean residual mean=-0.000004 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.342282 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 0.342281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084149Jy  sigma=0.227210
! Fit after  self-cal, rms=0.084152Jy  sigma=0.227204
wmodel /g0/scr/pima/npcsa_uvs/J0919+7825_S_map.mod
! Writing 90 model components to file: /g0/scr/pima/npcsa_uvs/J0919+7825_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0919+7825_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0919+7825_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0919+7825_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0919+7825_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182035 Jy
! Component: 100  -  total flux cleaned = 3.25344e-05 Jy
! Component: 150  -  total flux cleaned = -0.000107571 Jy
! Component: 200  -  total flux cleaned = -0.000323645 Jy
! Component: 250  -  total flux cleaned = -0.000488095 Jy
! Component: 300  -  total flux cleaned = -0.000606154 Jy
! Component: 350  -  total flux cleaned = -0.000719827 Jy
! Component: 400  -  total flux cleaned = -0.000828595 Jy
! Component: 450  -  total flux cleaned = -0.00103988 Jy
! Component: 500  -  total flux cleaned = -0.00128002 Jy
! Component: 550  -  total flux cleaned = -0.00154505 Jy
! Component: 600  -  total flux cleaned = -0.00167435 Jy
! Component: 650  -  total flux cleaned = -0.00180077 Jy
! Component: 700  -  total flux cleaned = -0.00186198 Jy
! Component: 750  -  total flux cleaned = -0.002011 Jy
! Component: 800  -  total flux cleaned = -0.00212767 Jy
! Component: 850  -  total flux cleaned = -0.00224196 Jy
! Component: 900  -  total flux cleaned = -0.00229752 Jy
! Component: 950  -  total flux cleaned = -0.00227034 Jy
! Component: 1000  -  total flux cleaned = -0.00240554 Jy
! Component: 1050  -  total flux cleaned = -0.00243218 Jy
! Component: 1100  -  total flux cleaned = -0.00251023 Jy
! Component: 1150  -  total flux cleaned = -0.0025356 Jy
! Component: 1200  -  total flux cleaned = -0.00256092 Jy
! Component: 1250  -  total flux cleaned = -0.00265973 Jy
! Component: 1300  -  total flux cleaned = -0.00263595 Jy
! Component: 1350  -  total flux cleaned = -0.00275657 Jy
! Component: 1400  -  total flux cleaned = -0.00282827 Jy
! Component: 1450  -  total flux cleaned = -0.00296859 Jy
! Component: 1500  -  total flux cleaned = -0.00294581 Jy
! Component: 1550  -  total flux cleaned = -0.00308198 Jy
! Component: 1600  -  total flux cleaned = -0.00310488 Jy
! Component: 1650  -  total flux cleaned = -0.00328216 Jy
! Component: 1700  -  total flux cleaned = -0.00343508 Jy
! Component: 1750  -  total flux cleaned = -0.00347843 Jy
! Component: 1800  -  total flux cleaned = -0.00356357 Jy
! Component: 1850  -  total flux cleaned = -0.00366862 Jy
! Component: 1900  -  total flux cleaned = -0.00370973 Jy
! Component: 1950  -  total flux cleaned = -0.00368891 Jy
! Component: 2000  -  total flux cleaned = -0.00370945 Jy
! Component: 2050  -  total flux cleaned = -0.0037095 Jy
! Component: 2100  -  total flux cleaned = -0.0036494 Jy
! Component: 2150  -  total flux cleaned = -0.00362957 Jy
! Component: 2200  -  total flux cleaned = -0.00353112 Jy
! Component: 2250  -  total flux cleaned = -0.00355058 Jy
! Component: 2300  -  total flux cleaned = -0.00351188 Jy
! Component: 2350  -  total flux cleaned = -0.00343503 Jy
! Component: 2400  -  total flux cleaned = -0.00332068 Jy
! Component: 2450  -  total flux cleaned = -0.00322649 Jy
! Component: 2500  -  total flux cleaned = -0.00320791 Jy
! Component: 2550  -  total flux cleaned = -0.00309674 Jy
! Component: 2600  -  total flux cleaned = -0.00307843 Jy
! Component: 2650  -  total flux cleaned = -0.00302366 Jy
! Component: 2700  -  total flux cleaned = -0.0030057 Jy
! Component: 2750  -  total flux cleaned = -0.00300577 Jy
! Component: 2800  -  total flux cleaned = -0.00293431 Jy
! Component: 2850  -  total flux cleaned = -0.00295199 Jy
! Component: 2900  -  total flux cleaned = -0.00286389 Jy
! Component: 2950  -  total flux cleaned = -0.00284633 Jy
! Component: 3000  -  total flux cleaned = -0.00277686 Jy
! Component: 3050  -  total flux cleaned = -0.00274239 Jy
! Component: 3100  -  total flux cleaned = -0.00262272 Jy
! Component: 3150  -  total flux cleaned = -0.00269068 Jy
! Component: 3200  -  total flux cleaned = -0.00269066 Jy
! Component: 3250  -  total flux cleaned = -0.00262343 Jy
! Component: 3300  -  total flux cleaned = -0.00259035 Jy
! Component: 3350  -  total flux cleaned = -0.00254074 Jy
! Component: 3400  -  total flux cleaned = -0.00254057 Jy
! Component: 3450  -  total flux cleaned = -0.00252426 Jy
! Component: 3500  -  total flux cleaned = -0.00254021 Jy
! Component: 3550  -  total flux cleaned = -0.00249172 Jy
! Component: 3600  -  total flux cleaned = -0.0025398 Jy
! Component: 3650  -  total flux cleaned = -0.00245999 Jy
! Component: 3700  -  total flux cleaned = -0.00245992 Jy
! Component: 3750  -  total flux cleaned = -0.00247564 Jy
! Component: 3800  -  total flux cleaned = -0.00250703 Jy
! Component: 3850  -  total flux cleaned = -0.00247589 Jy
! Component: 3900  -  total flux cleaned = -0.00247591 Jy
! Component: 3950  -  total flux cleaned = -0.00252187 Jy
! Component: 4000  -  total flux cleaned = -0.00247576 Jy
! Component: 4050  -  total flux cleaned = -0.00244536 Jy
! Total flux subtracted in 4096 components = -0.00236962 Jy
! Clean residual min=-0.001082 max=0.000857 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.339912 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 398 components and 0.339912 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0919+7825_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.067 x 10.69 at 11.94 degrees (North through East)
! Clean map  min=-0.0021296  max=0.31577 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0919+7825_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.315772 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282965 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.268832 0.268832 0.537663 1.07533 2.15065 4.30131 8.60261 17.2052 34.4104 68.8209
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.315 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0919+7825_S_uvs.log closed on Sun Oct  6 10:32:27 2013