! Started logfile: /g0/scr/pima/npcsa_uvs/J0818+4222_X_uvs.log on Sun Oct  6 10:27:17 2013
obs /g0/scr/pima/npcsa_uvs/J0818+4222_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0818+4222_X_uva.fits
! AN table 1: 20 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.846667 visibilities/baseline/integration-bin.
! Found source: J0818+4222
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3048 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0818+4222_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.148538Jy  sigma=5.559299
! Fit after  self-cal, rms=0.471338Jy  sigma=1.868772
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9243 mas, bmaj=1.249 mas, bpa=-13.25 degrees
! Estimated noise=4.29258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.436402 Jy
! Component: 100  -  total flux cleaned = 0.545544 Jy
! Total flux subtracted in 100 components = 0.545544 Jy
! Clean residual min=-0.024011 max=0.083813 Jy/beam
! Clean residual mean=0.000022 rms=0.007106 Jy/beam
! Combined flux in latest and established models = 0.545544 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.545544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156197Jy  sigma=0.789325
! Fit after  self-cal, rms=0.155468Jy  sigma=0.788429
! Inverting map 
! Added new window around map position (1.4, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0719898 Jy
! Component: 100  -  total flux cleaned = 0.106232 Jy
! Total flux subtracted in 100 components = 0.106232 Jy
! Clean residual min=-0.019577 max=0.033860 Jy/beam
! Clean residual mean=0.000008 rms=0.004169 Jy/beam
! Combined flux in latest and established models = 0.651776 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 0.651776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118471Jy  sigma=0.544282
! Fit after  self-cal, rms=0.112088Jy  sigma=0.525419
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274739 Jy
! Component: 100  -  total flux cleaned = 0.0426568 Jy
! Total flux subtracted in 100 components = 0.0426568 Jy
! Clean residual min=-0.014970 max=0.015961 Jy/beam
! Clean residual mean=0.000003 rms=0.002914 Jy/beam
! Combined flux in latest and established models = 0.694433 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.694432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104735Jy  sigma=0.468041
! Fit after  self-cal, rms=0.103361Jy  sigma=0.464330
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.14 mas, bmaj=1.497 mas, bpa=-22.2 degrees
! Estimated noise=2.89272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190511 Jy
! Component: 100  -  total flux cleaned = 0.0296258 Jy
! Component: 150  -  total flux cleaned = 0.0364315 Jy
! Component: 200  -  total flux cleaned = 0.0409379 Jy
! Total flux subtracted in 200 components = 0.0409379 Jy
! Clean residual min=-0.013008 max=0.010190 Jy/beam
! Clean residual mean=0.000010 rms=0.002552 Jy/beam
! Combined flux in latest and established models = 0.73537 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 61 components and 0.73537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100814Jy  sigma=0.439602
! Fit after  self-cal, rms=0.100256Jy  sigma=0.438054
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        1.02     
!   LA        1.02     MK        1.01     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        0.94     
!   LA        0.96     MK        0.96     NL        1.00     OV        0.99     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        1.01     KP        0.83     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.01     KP        0.92     
!   LA        0.95     MK        0.99     NL        0.99     OV        1.01     
!   PT        1.06     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.100256Jy  sigma=0.438054
! Fit after  self-cal, rms=0.093329Jy  sigma=0.392281
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=1.502 mas, bpa=-21.39 degrees
! Estimated noise=2.86787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00488781 Jy
! Component: 100  -  total flux cleaned = -0.00555294 Jy
! Component: 150  -  total flux cleaned = -0.00574187 Jy
! Component: 200  -  total flux cleaned = -0.00573535 Jy
! Total flux subtracted in 200 components = -0.00573535 Jy
! Clean residual min=-0.005186 max=0.005507 Jy/beam
! Clean residual mean=0.000008 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.729635 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 0.729635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092563Jy  sigma=0.391677
! Fit after  self-cal, rms=0.092403Jy  sigma=0.391175
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092403Jy  sigma=0.391175
! Fit after  self-cal, rms=0.091964Jy  sigma=0.388266
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=1.502 mas, bpa=-21.53 degrees
! Estimated noise=2.84887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00469396 Jy
! Component: 100  -  total flux cleaned = -0.00510546 Jy
! Component: 150  -  total flux cleaned = -0.00518177 Jy
! Component: 200  -  total flux cleaned = -0.00517944 Jy
! Total flux subtracted in 200 components = -0.00517944 Jy
! Clean residual min=-0.005065 max=0.004914 Jy/beam
! Clean residual mean=-0.000000 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.724455 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 68 components and 0.724455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091364Jy  sigma=0.388202
! Fit after  self-cal, rms=0.091254Jy  sigma=0.387973
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000425614 Jy
! Component: 100  -  total flux cleaned = -0.000293768 Jy
! Component: 150  -  total flux cleaned = -0.000188822 Jy
! Component: 200  -  total flux cleaned = -0.000189213 Jy
! Total flux subtracted in 200 components = -0.000189213 Jy
! Clean residual min=-0.004956 max=0.004760 Jy/beam
! Clean residual mean=-0.000000 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 0.724266 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.724266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091114Jy  sigma=0.387667
! Fit after  self-cal, rms=0.091045Jy  sigma=0.387531
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091045Jy  sigma=0.387531
! Fit after  self-cal, rms=0.090808Jy  sigma=0.386853
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.142 mas, bmaj=1.503 mas, bpa=-21.69 degrees
! Estimated noise=2.82787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00409614 Jy
! Component: 100  -  total flux cleaned = -0.00505229 Jy
! Component: 150  -  total flux cleaned = -0.00504999 Jy
! Component: 200  -  total flux cleaned = -0.00501188 Jy
! Total flux subtracted in 200 components = -0.00501188 Jy
! Clean residual min=-0.004742 max=0.004661 Jy/beam
! Clean residual mean=0.000000 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.719254 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.719254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090320Jy  sigma=0.387207
! Fit after  self-cal, rms=0.090272Jy  sigma=0.387102
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157138 Jy
! Component: 100  -  total flux cleaned = -6.32163e-05 Jy
! Component: 150  -  total flux cleaned = -2.47372e-05 Jy
! Component: 200  -  total flux cleaned = 8.6739e-06 Jy
! Total flux subtracted in 200 components = 8.6739e-06 Jy
! Clean residual min=-0.004657 max=0.004573 Jy/beam
! Clean residual mean=0.000000 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.719263 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.719263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090202Jy  sigma=0.386965
! Fit after  self-cal, rms=0.090172Jy  sigma=0.386901
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090172Jy  sigma=0.386901
! Fit after  self-cal, rms=0.089934Jy  sigma=0.386254
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.508 mas, bmaj=2.726 mas, bpa=-66.14 degrees
! Estimated noise=3.03657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00391952 Jy
! Component: 100  -  total flux cleaned = -0.00407954 Jy
! Component: 150  -  total flux cleaned = -0.00420949 Jy
! Component: 200  -  total flux cleaned = -0.00427538 Jy
! Total flux subtracted in 200 components = -0.00427538 Jy
! Clean residual min=-0.005272 max=0.005189 Jy/beam
! Clean residual mean=0.000000 rms=0.001433 Jy/beam
! Combined flux in latest and established models = 0.714987 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.714987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089589Jy  sigma=0.386779
! Fit after  self-cal, rms=0.089550Jy  sigma=0.386659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011452 Jy
! Component: 100  -  total flux cleaned = -4.34492e-05 Jy
! Component: 150  -  total flux cleaned = 6.95958e-06 Jy
! Component: 200  -  total flux cleaned = 7.65788e-06 Jy
! Total flux subtracted in 200 components = 7.65788e-06 Jy
! Clean residual min=-0.005258 max=0.005122 Jy/beam
! Clean residual mean=0.000000 rms=0.001428 Jy/beam
! Combined flux in latest and established models = 0.714995 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 86 components and 0.714995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089524Jy  sigma=0.386612
! Fit after  self-cal, rms=0.089508Jy  sigma=0.386557
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.142 mas, bmaj=1.502 mas, bpa=-21.77 degrees
! Estimated noise=2.80709 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.142 x 1.502 at -21.77 degrees (North through East)
! Clean map  min=-0.0043118  max=0.52663 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089508Jy  sigma=0.386557
! Fit after  self-cal, rms=0.085745Jy  sigma=0.354080
! Inverting map and beam 
! Estimated beam: bmin=1.142 mas, bmaj=1.504 mas, bpa=-21.82 degrees
! Estimated noise=2.79193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00308598 Jy
! Component: 100  -  total flux cleaned = -0.00403314 Jy
! Component: 150  -  total flux cleaned = -0.00420561 Jy
! Component: 200  -  total flux cleaned = -0.0042912 Jy
! Total flux subtracted in 200 components = -0.0042912 Jy
! Clean residual min=-0.004371 max=0.004595 Jy/beam
! Clean residual mean=-0.000002 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.710704 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 90 components and 0.710704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085422Jy  sigma=0.354409
! Fit after  self-cal, rms=0.085413Jy  sigma=0.354380
! Inverting map 
! Added new window around map position (3.8, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00457359 Jy
! Component: 100  -  total flux cleaned = 0.00714135 Jy
! Component: 150  -  total flux cleaned = 0.00823057 Jy
! Component: 200  -  total flux cleaned = 0.00839024 Jy
! Total flux subtracted in 200 components = 0.00839024 Jy
! Clean residual min=-0.004046 max=0.004002 Jy/beam
! Clean residual mean=0.000004 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.719094 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 108 components and 0.719094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085176Jy  sigma=0.352772
! Fit after  self-cal, rms=0.085142Jy  sigma=0.352643
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085142Jy  sigma=0.352643
! Fit after  self-cal, rms=0.084896Jy  sigma=0.352058
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9217 mas, bmaj=1.249 mas, bpa=-13.54 degrees
! Estimated noise=4.138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.418036 Jy
! Component: 100  -  total flux cleaned = 0.544924 Jy
! Component: 150  -  total flux cleaned = 0.60677 Jy
! Component: 200  -  total flux cleaned = 0.639711 Jy
! Total flux subtracted in 200 components = 0.639711 Jy
! Clean residual min=-0.008607 max=0.016097 Jy/beam
! Clean residual mean=0.000006 rms=0.002323 Jy/beam
! Combined flux in latest and established models = 0.639711 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.639711 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=1.503 mas, bpa=-21.79 degrees
! Estimated noise=2.77414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0267228 Jy
! Component: 100  -  total flux cleaned = 0.0411655 Jy
! Component: 150  -  total flux cleaned = 0.0500956 Jy
! Component: 200  -  total flux cleaned = 0.0564631 Jy
! Total flux subtracted in 200 components = 0.0564631 Jy
! Clean residual min=-0.005039 max=0.005302 Jy/beam
! Clean residual mean=-0.000006 rms=0.001241 Jy/beam
! Combined flux in latest and established models = 0.696175 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 60 components and 0.696175 Jy
! Inverting map 
! Added new window around map position (1.2, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00566652 Jy
! Component: 100  -  total flux cleaned = 0.00970021 Jy
! Component: 150  -  total flux cleaned = 0.0128729 Jy
! Component: 200  -  total flux cleaned = 0.0153839 Jy
! Total flux subtracted in 200 components = 0.0153839 Jy
! Clean residual min=-0.004424 max=0.004127 Jy/beam
! Clean residual mean=0.000002 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.711558 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 76 components and 0.711558 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.509 mas, bmaj=2.725 mas, bpa=-66.06 degrees
! Estimated noise=3.00069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279398 Jy
! Component: 100  -  total flux cleaned = 0.00432751 Jy
! Component: 150  -  total flux cleaned = 0.00502197 Jy
! Component: 200  -  total flux cleaned = 0.00554631 Jy
! Total flux subtracted in 200 components = 0.00554631 Jy
! Clean residual min=-0.004698 max=0.004909 Jy/beam
! Clean residual mean=0.000008 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.717105 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124433 Jy
! Component: 100  -  total flux cleaned = 0.00144743 Jy
! Component: 150  -  total flux cleaned = 0.0019983 Jy
! Component: 200  -  total flux cleaned = 0.00248592 Jy
! Total flux subtracted in 200 components = 0.00248592 Jy
! Clean residual min=-0.003574 max=0.003118 Jy/beam
! Clean residual mean=0.000003 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.719591 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 128 components and 0.719591 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=1.503 mas, bpa=-21.79 degrees
! Estimated noise=2.77414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104477 Jy
! Component: 100  -  total flux cleaned = -0.00112499 Jy
! Component: 150  -  total flux cleaned = -0.00112649 Jy
! Component: 200  -  total flux cleaned = -0.00119714 Jy
! Total flux subtracted in 200 components = -0.00119714 Jy
! Clean residual min=-0.003504 max=0.003343 Jy/beam
! Clean residual mean=0.000002 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.718394 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 157 components and 0.718394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084172Jy  sigma=0.350431
! Fit after  self-cal, rms=0.084089Jy  sigma=0.350113
wmodel /g0/scr/pima/npcsa_uvs/J0818+4222_X_map.mod
! Writing 157 model components to file: /g0/scr/pima/npcsa_uvs/J0818+4222_X_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0818+4222_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0818+4222_X_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0818+4222_X_map.win
! wwins: Wrote 5 windows to /g0/scr/pima/npcsa_uvs/J0818+4222_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000315854 Jy
! Component: 100  -  total flux cleaned = -0.000735331 Jy
! Component: 150  -  total flux cleaned = -0.000965466 Jy
! Component: 200  -  total flux cleaned = -0.000911273 Jy
! Component: 250  -  total flux cleaned = -0.00085821 Jy
! Component: 300  -  total flux cleaned = -0.000753566 Jy
! Component: 350  -  total flux cleaned = -0.000652768 Jy
! Component: 400  -  total flux cleaned = -0.000604133 Jy
! Component: 450  -  total flux cleaned = -0.000508252 Jy
! Component: 500  -  total flux cleaned = -0.000557323 Jy
! Component: 550  -  total flux cleaned = -0.000556869 Jy
! Component: 600  -  total flux cleaned = -0.000419143 Jy
! Component: 650  -  total flux cleaned = -0.000329141 Jy
! Component: 700  -  total flux cleaned = -0.000374556 Jy
! Component: 750  -  total flux cleaned = -0.000243035 Jy
! Component: 800  -  total flux cleaned = -0.000115099 Jy
! Component: 850  -  total flux cleaned = -0.000158785 Jy
! Component: 900  -  total flux cleaned = -0.00028382 Jy
! Component: 950  -  total flux cleaned = -0.000117024 Jy
! Component: 1000  -  total flux cleaned = -3.42137e-05 Jy
! Component: 1050  -  total flux cleaned = 4.69777e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000126799 Jy
! Component: 1150  -  total flux cleaned = 8.81089e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000243836 Jy
! Component: 1250  -  total flux cleaned = 0.000243517 Jy
! Component: 1300  -  total flux cleaned = 0.000129021 Jy
! Component: 1350  -  total flux cleaned = 0.000204923 Jy
! Component: 1400  -  total flux cleaned = 0.000391602 Jy
! Component: 1450  -  total flux cleaned = 0.000354296 Jy
! Component: 1500  -  total flux cleaned = 0.000354439 Jy
! Component: 1550  -  total flux cleaned = 0.000354347 Jy
! Component: 1600  -  total flux cleaned = 0.000282804 Jy
! Component: 1650  -  total flux cleaned = 0.000247838 Jy
! Component: 1700  -  total flux cleaned = 0.000247924 Jy
! Component: 1750  -  total flux cleaned = 0.000248351 Jy
! Component: 1800  -  total flux cleaned = 0.000352262 Jy
! Component: 1850  -  total flux cleaned = 0.00035189 Jy
! Component: 1900  -  total flux cleaned = 0.00045361 Jy
! Component: 1950  -  total flux cleaned = 0.000453513 Jy
! Component: 2000  -  total flux cleaned = 0.000453191 Jy
! Component: 2050  -  total flux cleaned = 0.000520125 Jy
! Component: 2100  -  total flux cleaned = 0.000454411 Jy
! Component: 2150  -  total flux cleaned = 0.000487439 Jy
! Component: 2200  -  total flux cleaned = 0.000584945 Jy
! Component: 2250  -  total flux cleaned = 0.000713533 Jy
! Component: 2300  -  total flux cleaned = 0.000713791 Jy
! Component: 2350  -  total flux cleaned = 0.00084079 Jy
! Component: 2400  -  total flux cleaned = 0.000998074 Jy
! Component: 2450  -  total flux cleaned = 0.00102955 Jy
! Component: 2500  -  total flux cleaned = 0.00121553 Jy
! Component: 2550  -  total flux cleaned = 0.00127699 Jy
! Component: 2600  -  total flux cleaned = 0.00133803 Jy
! Component: 2650  -  total flux cleaned = 0.00133825 Jy
! Component: 2700  -  total flux cleaned = 0.00148865 Jy
! Component: 2750  -  total flux cleaned = 0.0015486 Jy
! Component: 2800  -  total flux cleaned = 0.00160835 Jy
! Component: 2850  -  total flux cleaned = 0.0017266 Jy
! Component: 2900  -  total flux cleaned = 0.00178505 Jy
! Component: 2950  -  total flux cleaned = 0.001785 Jy
! Component: 3000  -  total flux cleaned = 0.00192993 Jy
! Component: 3050  -  total flux cleaned = 0.00198758 Jy
! Component: 3100  -  total flux cleaned = 0.00207354 Jy
! Component: 3150  -  total flux cleaned = 0.00215905 Jy
! Component: 3200  -  total flux cleaned = 0.00218754 Jy
! Component: 3250  -  total flux cleaned = 0.00238404 Jy
! Component: 3300  -  total flux cleaned = 0.00252355 Jy
! Component: 3350  -  total flux cleaned = 0.00249569 Jy
! Component: 3400  -  total flux cleaned = 0.00263392 Jy
! Component: 3450  -  total flux cleaned = 0.00266147 Jy
! Component: 3500  -  total flux cleaned = 0.00277068 Jy
! Component: 3550  -  total flux cleaned = 0.00282509 Jy
! Component: 3600  -  total flux cleaned = 0.00290599 Jy
! Component: 3650  -  total flux cleaned = 0.00306702 Jy
! Component: 3700  -  total flux cleaned = 0.00293343 Jy
! Component: 3750  -  total flux cleaned = 0.00314582 Jy
! Component: 3800  -  total flux cleaned = 0.00317215 Jy
! Component: 3850  -  total flux cleaned = 0.00327713 Jy
! Component: 3900  -  total flux cleaned = 0.00319867 Jy
! Component: 3950  -  total flux cleaned = 0.00330262 Jy
! Component: 4000  -  total flux cleaned = 0.00312167 Jy
! Component: 4050  -  total flux cleaned = 0.00319879 Jy
! Total flux subtracted in 4096 components = 0.00317318 Jy
! Clean residual min=-0.001528 max=0.001790 Jy/beam
! Clean residual mean=-0.000002 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.721567 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 444 components and 0.721567 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0818+4222_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.141 x 1.503 at -21.79 degrees (North through East)
! Clean map  min=-0.0026399  max=0.52 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0818+4222_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.520003 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000424198 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.244728 0.244728 0.489457 0.978914 1.95783 3.91565 7.83131 15.6626 31.3252 62.6505
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.52 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0818+4222_X_uvs.log closed on Sun Oct  6 10:27:22 2013