! Started logfile: /g0/scr/pima/npcsa_uvs/J0733+5022_S_uvs.log on Sun Oct  6 10:31:57 2013
obs /g0/scr/pima/npcsa_uvs/J0733+5022_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0733+5022_S_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.860317 visibilities/baseline/integration-bin.
! Found source: J0733+5022
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2168 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0733+5022_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.155771Jy  sigma=5.370434
! Fit after  self-cal, rms=0.431761Jy  sigma=1.881915
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.749 mas, bmaj=8.705 mas, bpa=19.57 degrees
! Estimated noise=5.06438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.461185 Jy
! Component: 100  -  total flux cleaned = 0.566873 Jy
! Total flux subtracted in 100 components = 0.566873 Jy
! Clean residual min=-0.026918 max=0.039832 Jy/beam
! Clean residual mean=-0.000009 rms=0.007752 Jy/beam
! Combined flux in latest and established models = 0.566873 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.566873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136256Jy  sigma=0.661027
! Fit after  self-cal, rms=0.136263Jy  sigma=0.660851
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.188 mas, bmaj=9.537 mas, bpa=19.05 degrees
! Estimated noise=3.3658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0505549 Jy
! Component: 100  -  total flux cleaned = 0.0749025 Jy
! Component: 150  -  total flux cleaned = 0.0895908 Jy
! Component: 200  -  total flux cleaned = 0.0990509 Jy
! Total flux subtracted in 200 components = 0.0990509 Jy
! Clean residual min=-0.024278 max=0.016081 Jy/beam
! Clean residual mean=-0.000007 rms=0.004431 Jy/beam
! Combined flux in latest and established models = 0.665924 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 52 components and 0.665924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121720Jy  sigma=0.560457
! Fit after  self-cal, rms=0.121546Jy  sigma=0.559617
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        0.97     
!   LA        1.12     MK        0.90     NL        0.99     OV        0.91     
!   PT        1.07     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        0.98     
!   LA        1.03     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.03     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.05     HN        1.03     KP        0.98     
!   LA        0.86     MK        1.12     NL        1.10     OV        1.03     
!   PT        1.10     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.06     HN        0.95     KP        0.90     
!   LA        0.74     MK        1.13     NL        1.04     OV        0.87     
!   PT        0.97     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.121546Jy  sigma=0.559617
! Fit after  self-cal, rms=0.094066Jy  sigma=0.419329
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=9.581 mas, bpa=19 degrees
! Estimated noise=3.31899 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00572328 Jy
! Component: 100  -  total flux cleaned = -0.0073254 Jy
! Component: 150  -  total flux cleaned = -0.0078586 Jy
! Component: 200  -  total flux cleaned = -0.00803778 Jy
! Total flux subtracted in 200 components = -0.00803778 Jy
! Clean residual min=-0.004908 max=0.005524 Jy/beam
! Clean residual mean=0.000002 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.657886 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 63 components and 0.657886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093210Jy  sigma=0.419863
! Fit after  self-cal, rms=0.093282Jy  sigma=0.419594
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093282Jy  sigma=0.419594
! Fit after  self-cal, rms=0.093057Jy  sigma=0.418530
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=9.583 mas, bpa=18.99 degrees
! Estimated noise=3.28542 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00528954 Jy
! Component: 100  -  total flux cleaned = -0.00732569 Jy
! Component: 150  -  total flux cleaned = -0.00760401 Jy
! Component: 200  -  total flux cleaned = -0.00765072 Jy
! Total flux subtracted in 200 components = -0.00765072 Jy
! Clean residual min=-0.004838 max=0.005422 Jy/beam
! Clean residual mean=0.000002 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.650236 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.650236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092279Jy  sigma=0.419336
! Fit after  self-cal, rms=0.092272Jy  sigma=0.419306
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.65675e-05 Jy
! Component: 100  -  total flux cleaned = 1.74805e-05 Jy
! Component: 150  -  total flux cleaned = 5.45121e-05 Jy
! Component: 200  -  total flux cleaned = 9.03866e-05 Jy
! Total flux subtracted in 200 components = 9.03866e-05 Jy
! Clean residual min=-0.004821 max=0.005337 Jy/beam
! Clean residual mean=0.000002 rms=0.001299 Jy/beam
! Combined flux in latest and established models = 0.650326 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.650326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092220Jy  sigma=0.419223
! Fit after  self-cal, rms=0.092219Jy  sigma=0.419205
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092219Jy  sigma=0.419205
! Fit after  self-cal, rms=0.091993Jy  sigma=0.418110
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=9.583 mas, bpa=19 degrees
! Estimated noise=3.25141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0051234 Jy
! Component: 100  -  total flux cleaned = -0.0065308 Jy
! Component: 150  -  total flux cleaned = -0.00679713 Jy
! Component: 200  -  total flux cleaned = -0.00683136 Jy
! Total flux subtracted in 200 components = -0.00683136 Jy
! Clean residual min=-0.004762 max=0.005291 Jy/beam
! Clean residual mean=0.000002 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.643495 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 75 components and 0.643495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091252Jy  sigma=0.419078
! Fit after  self-cal, rms=0.091253Jy  sigma=0.419068
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124735 Jy
! Component: 100  -  total flux cleaned = -6.45483e-05 Jy
! Component: 150  -  total flux cleaned = -3.6712e-05 Jy
! Component: 200  -  total flux cleaned = 1.53178e-05 Jy
! Total flux subtracted in 200 components = 1.53178e-05 Jy
! Clean residual min=-0.004773 max=0.005233 Jy/beam
! Clean residual mean=0.000002 rms=0.001272 Jy/beam
! Combined flux in latest and established models = 0.64351 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 80 components and 0.64351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091226Jy  sigma=0.419040
! Fit after  self-cal, rms=0.091228Jy  sigma=0.419033
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091228Jy  sigma=0.419033
! Fit after  self-cal, rms=0.091002Jy  sigma=0.417952
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.189 mas, bmaj=11.13 mas, bpa=15.04 degrees
! Estimated noise=3.8273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00507183 Jy
! Component: 100  -  total flux cleaned = -0.00541484 Jy
! Component: 150  -  total flux cleaned = -0.00536488 Jy
! Component: 200  -  total flux cleaned = -0.0053682 Jy
! Total flux subtracted in 200 components = -0.0053682 Jy
! Clean residual min=-0.005831 max=0.007193 Jy/beam
! Clean residual mean=0.000005 rms=0.001600 Jy/beam
! Combined flux in latest and established models = 0.638142 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.638142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090365Jy  sigma=0.418803
! Fit after  self-cal, rms=0.090358Jy  sigma=0.418785
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.5, -113.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00472062 Jy
! Component: 100  -  total flux cleaned = 0.00507672 Jy
! Component: 150  -  total flux cleaned = 0.00533251 Jy
! Component: 200  -  total flux cleaned = 0.00532315 Jy
! Total flux subtracted in 200 components = 0.00532315 Jy
! Clean residual min=-0.004378 max=0.004143 Jy/beam
! Clean residual mean=-0.000004 rms=0.001108 Jy/beam
! Combined flux in latest and established models = 0.643465 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 131 components and 0.643465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090095Jy  sigma=0.417420
! Fit after  self-cal, rms=0.090088Jy  sigma=0.417361
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=9.583 mas, bpa=19.01 degrees
! Estimated noise=3.21768 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.208 x 9.583 at 19.01 degrees (North through East)
! Clean map  min=-0.0047217  max=0.57494 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090088Jy  sigma=0.417361
! Fit after  self-cal, rms=0.082461Jy  sigma=0.368178
! Inverting map and beam 
! Estimated beam: bmin=3.21 mas, bmaj=9.579 mas, bpa=18.99 degrees
! Estimated noise=3.19982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241494 Jy
! Component: 100  -  total flux cleaned = -0.00240989 Jy
! Component: 150  -  total flux cleaned = -0.00257759 Jy
! Component: 200  -  total flux cleaned = -0.00257683 Jy
! Total flux subtracted in 200 components = -0.00257683 Jy
! Clean residual min=-0.004296 max=0.003949 Jy/beam
! Clean residual mean=-0.000000 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.640888 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 153 components and 0.640888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082079Jy  sigma=0.367791
! Fit after  self-cal, rms=0.082075Jy  sigma=0.367771
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.06581e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106385 Jy
! Component: 150  -  total flux cleaned = -0.000164551 Jy
! Component: 200  -  total flux cleaned = -0.000165476 Jy
! Total flux subtracted in 200 components = -0.000165476 Jy
! Clean residual min=-0.004230 max=0.003765 Jy/beam
! Clean residual mean=-0.000001 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.640723 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 168 components and 0.640723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081964Jy  sigma=0.367448
! Fit after  self-cal, rms=0.081965Jy  sigma=0.367441
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081965Jy  sigma=0.367441
! Fit after  self-cal, rms=0.081771Jy  sigma=0.367070
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.768 mas, bmaj=8.743 mas, bpa=19.49 degrees
! Estimated noise=4.79802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.436833 Jy
! Component: 100  -  total flux cleaned = 0.536504 Jy
! Component: 150  -  total flux cleaned = 0.576 Jy
! Component: 200  -  total flux cleaned = 0.59534 Jy
! Total flux subtracted in 200 components = 0.59534 Jy
! Clean residual min=-0.010992 max=0.010412 Jy/beam
! Clean residual mean=0.000000 rms=0.002419 Jy/beam
! Combined flux in latest and established models = 0.59534 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.59534 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.21 mas, bmaj=9.577 mas, bpa=18.99 degrees
! Estimated noise=3.18205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152158 Jy
! Component: 100  -  total flux cleaned = 0.0243123 Jy
! Component: 150  -  total flux cleaned = 0.029089 Jy
! Component: 200  -  total flux cleaned = 0.0323906 Jy
! Total flux subtracted in 200 components = 0.0323906 Jy
! Clean residual min=-0.004720 max=0.004541 Jy/beam
! Clean residual mean=0.000001 rms=0.001234 Jy/beam
! Combined flux in latest and established models = 0.627731 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 64 components and 0.627731 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.188 mas, bmaj=11.12 mas, bpa=15 degrees
! Estimated noise=3.78405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00492842 Jy
! Component: 100  -  total flux cleaned = 0.00633167 Jy
! Component: 150  -  total flux cleaned = 0.00724218 Jy
! Component: 200  -  total flux cleaned = 0.00792343 Jy
! Total flux subtracted in 200 components = 0.00792343 Jy
! Clean residual min=-0.004255 max=0.003652 Jy/beam
! Clean residual mean=-0.000002 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.635654 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000304462 Jy
! Component: 100  -  total flux cleaned = 0.000561758 Jy
! Component: 150  -  total flux cleaned = 0.000603579 Jy
! Component: 200  -  total flux cleaned = 0.000641521 Jy
! Total flux subtracted in 200 components = 0.000641521 Jy
! Clean residual min=-0.003968 max=0.003711 Jy/beam
! Clean residual mean=-0.000003 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.636296 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 131 components and 0.636296 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.21 mas, bmaj=9.577 mas, bpa=18.99 degrees
! Estimated noise=3.18205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142366 Jy
! Component: 100  -  total flux cleaned = -0.000147917 Jy
! Component: 150  -  total flux cleaned = -0.000319489 Jy
! Component: 200  -  total flux cleaned = -8.36033e-05 Jy
! Total flux subtracted in 200 components = -8.36033e-05 Jy
! Clean residual min=-0.004221 max=0.004132 Jy/beam
! Clean residual mean=-0.000001 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.636212 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 154 components and 0.636212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081684Jy  sigma=0.367975
! Fit after  self-cal, rms=0.081677Jy  sigma=0.367869
wmodel /g0/scr/pima/npcsa_uvs/J0733+5022_S_map.mod
! Writing 154 model components to file: /g0/scr/pima/npcsa_uvs/J0733+5022_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0733+5022_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0733+5022_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0733+5022_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J0733+5022_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169971 Jy
! Component: 100  -  total flux cleaned = -0.000301239 Jy
! Component: 150  -  total flux cleaned = -0.000421195 Jy
! Component: 200  -  total flux cleaned = -0.000535295 Jy
! Component: 250  -  total flux cleaned = -0.00053686 Jy
! Component: 300  -  total flux cleaned = -0.000484971 Jy
! Component: 350  -  total flux cleaned = -0.000381705 Jy
! Component: 400  -  total flux cleaned = -0.00038187 Jy
! Component: 450  -  total flux cleaned = -0.000382427 Jy
! Component: 500  -  total flux cleaned = -0.000242418 Jy
! Component: 550  -  total flux cleaned = -0.000242732 Jy
! Component: 600  -  total flux cleaned = -0.000153603 Jy
! Component: 650  -  total flux cleaned = -0.00011079 Jy
! Component: 700  -  total flux cleaned = -0.000111227 Jy
! Component: 750  -  total flux cleaned = -0.000111536 Jy
! Component: 800  -  total flux cleaned = -7.1153e-05 Jy
! Component: 850  -  total flux cleaned = 8.88561e-06 Jy
! Component: 900  -  total flux cleaned = 0.000165758 Jy
! Component: 950  -  total flux cleaned = 0.000434238 Jy
! Component: 1000  -  total flux cleaned = 0.000433852 Jy
! Component: 1050  -  total flux cleaned = 0.000471101 Jy
! Component: 1100  -  total flux cleaned = 0.000580452 Jy
! Component: 1150  -  total flux cleaned = 0.000472378 Jy
! Component: 1200  -  total flux cleaned = 0.000437178 Jy
! Component: 1250  -  total flux cleaned = 0.000229422 Jy
! Component: 1300  -  total flux cleaned = 0.000298239 Jy
! Component: 1350  -  total flux cleaned = 0.000264888 Jy
! Component: 1400  -  total flux cleaned = 0.000231211 Jy
! Component: 1450  -  total flux cleaned = 0.000198591 Jy
! Component: 1500  -  total flux cleaned = 0.000166674 Jy
! Component: 1550  -  total flux cleaned = 0.000102649 Jy
! Component: 1600  -  total flux cleaned = 7.13586e-05 Jy
! Component: 1650  -  total flux cleaned = 0.000101689 Jy
! Component: 1700  -  total flux cleaned = -2.0716e-05 Jy
! Component: 1750  -  total flux cleaned = -8.11983e-05 Jy
! Component: 1800  -  total flux cleaned = -0.000140642 Jy
! Component: 1850  -  total flux cleaned = -0.000111083 Jy
! Component: 1900  -  total flux cleaned = -0.000140177 Jy
! Component: 1950  -  total flux cleaned = -0.000284611 Jy
! Component: 2000  -  total flux cleaned = -0.000370399 Jy
! Component: 2050  -  total flux cleaned = -0.000455312 Jy
! Component: 2100  -  total flux cleaned = -0.000622923 Jy
! Component: 2150  -  total flux cleaned = -0.00070574 Jy
! Component: 2200  -  total flux cleaned = -0.000815175 Jy
! Component: 2250  -  total flux cleaned = -0.000842425 Jy
! Component: 2300  -  total flux cleaned = -0.00100305 Jy
! Component: 2350  -  total flux cleaned = -0.00105586 Jy
! Component: 2400  -  total flux cleaned = -0.0011874 Jy
! Component: 2450  -  total flux cleaned = -0.00129165 Jy
! Component: 2500  -  total flux cleaned = -0.00142091 Jy
! Component: 2550  -  total flux cleaned = -0.00162521 Jy
! Component: 2600  -  total flux cleaned = -0.00170067 Jy
! Component: 2650  -  total flux cleaned = -0.0018262 Jy
! Component: 2700  -  total flux cleaned = -0.00190069 Jy
! Component: 2750  -  total flux cleaned = -0.00199958 Jy
! Component: 2800  -  total flux cleaned = -0.00214684 Jy
! Component: 2850  -  total flux cleaned = -0.00226869 Jy
! Component: 2900  -  total flux cleaned = -0.00238945 Jy
! Component: 2950  -  total flux cleaned = -0.00250947 Jy
! Component: 3000  -  total flux cleaned = -0.00260472 Jy
! Component: 3050  -  total flux cleaned = -0.00281769 Jy
! Component: 3100  -  total flux cleaned = -0.00288817 Jy
! Component: 3150  -  total flux cleaned = -0.00302821 Jy
! Component: 3200  -  total flux cleaned = -0.0032366 Jy
! Component: 3250  -  total flux cleaned = -0.00335166 Jy
! Component: 3300  -  total flux cleaned = -0.00355772 Jy
! Component: 3350  -  total flux cleaned = -0.00369397 Jy
! Component: 3400  -  total flux cleaned = -0.00387478 Jy
! Component: 3450  -  total flux cleaned = -0.00403186 Jy
! Component: 3500  -  total flux cleaned = -0.00427714 Jy
! Component: 3550  -  total flux cleaned = -0.00434363 Jy
! Component: 3600  -  total flux cleaned = -0.00456406 Jy
! Component: 3650  -  total flux cleaned = -0.00473937 Jy
! Component: 3700  -  total flux cleaned = -0.00491342 Jy
! Component: 3750  -  total flux cleaned = -0.00506494 Jy
! Component: 3800  -  total flux cleaned = -0.00528006 Jy
! Component: 3850  -  total flux cleaned = -0.00534418 Jy
! Component: 3900  -  total flux cleaned = -0.00547195 Jy
! Component: 3950  -  total flux cleaned = -0.00562035 Jy
! Component: 4000  -  total flux cleaned = -0.00572583 Jy
! Component: 4050  -  total flux cleaned = -0.00580978 Jy
! Total flux subtracted in 4096 components = -0.00589326 Jy
! Clean residual min=-0.001809 max=0.001172 Jy/beam
! Clean residual mean=0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.630319 Jy
keep
! Adding 258 model components to the UV plane model.
! The established model now contains 412 components and 0.630319 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0733+5022_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.21 x 9.577 at 18.99 degrees (North through East)
! Clean map  min=-0.0027047  max=0.56861 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0733+5022_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.568611 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000373508 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.197063 0.197063 0.394127 0.788253 1.57651 3.15301 6.30603 12.6121 25.2241 50.4482
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.568 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0733+5022_S_uvs.log closed on Sun Oct  6 10:32:02 2013