! Started logfile: /g0/scr/pima/npcsa_uvs/J0714+8151_S_uvs.log on Sun Oct  6 10:31:52 2013
obs /g0/scr/pima/npcsa_uvs/J0714+8151_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0714+8151_S_uva.fits
! AN table 1: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.767078 visibilities/baseline/integration-bin.
! Found source: J0714+8151
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7456 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0714+8151_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005942Jy  sigma=0.759245
! Fit after  self-cal, rms=0.953378Jy  sigma=0.681909
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.579 mas, bmaj=10.67 mas, bpa=7.616 degrees
! Estimated noise=25.8069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0616244 Jy
! Component: 100  -  total flux cleaned = 0.0705925 Jy
! Total flux subtracted in 100 components = 0.0705925 Jy
! Clean residual min=-0.009800 max=0.009475 Jy/beam
! Clean residual mean=0.000001 rms=0.002886 Jy/beam
! Combined flux in latest and established models = 0.0705925 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0705925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103228Jy  sigma=0.078098
! Fit after  self-cal, rms=0.101253Jy  sigma=0.076728
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=11.36 mas, bpa=6.284 degrees
! Estimated noise=12.2331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00495641 Jy
! Component: 100  -  total flux cleaned = 0.00590653 Jy
! Component: 150  -  total flux cleaned = 0.00649936 Jy
! Component: 200  -  total flux cleaned = 0.00695154 Jy
! Total flux subtracted in 200 components = 0.00695154 Jy
! Clean residual min=-0.005820 max=0.005106 Jy/beam
! Clean residual mean=-0.000007 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.0775441 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.0775441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102435Jy  sigma=0.075226
! Fit after  self-cal, rms=0.102346Jy  sigma=0.075136
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.82     KP        0.90     
!   LA        0.85     MK        0.79     NL        0.96     OV        0.95     
!   PT        0.93     SC        0.80     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.79     HN        0.81     KP        0.86     
!   LA        0.84     MK        0.86     NL        0.91     OV        0.97     
!   PT        1.01     SC        0.78     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.80     HN        0.73     KP        0.83     
!   LA        0.68     MK        0.87     NL        1.15     OV        1.00     
!   PT        0.97     SC        0.81     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.83     HN        0.74     KP        0.79     
!   LA        0.54     MK        0.96     NL        1.00     OV        0.88     
!   PT        0.91     SC        0.77     
! 
! 
! Fit before self-cal, rms=0.102346Jy  sigma=0.075136
! Fit after  self-cal, rms=0.086871Jy  sigma=0.071274
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.264 mas, bmaj=11.42 mas, bpa=6.065 degrees
! Estimated noise=9.3732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0137761 Jy
! Component: 100  -  total flux cleaned = -0.0168439 Jy
! Component: 150  -  total flux cleaned = -0.017525 Jy
! Component: 200  -  total flux cleaned = -0.0178493 Jy
! Total flux subtracted in 200 components = -0.0178493 Jy
! Clean residual min=-0.003341 max=0.002691 Jy/beam
! Clean residual mean=-0.000004 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.0596948 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.0596948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081097Jy  sigma=0.073308
! Fit after  self-cal, rms=0.081330Jy  sigma=0.073076
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081330Jy  sigma=0.073076
! Fit after  self-cal, rms=0.069207Jy  sigma=0.070922
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.269 mas, bmaj=11.43 mas, bpa=6.094 degrees
! Estimated noise=7.3568 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0107668 Jy
! Component: 100  -  total flux cleaned = -0.0131471 Jy
! Component: 150  -  total flux cleaned = -0.0134437 Jy
! Component: 200  -  total flux cleaned = -0.0135985 Jy
! Total flux subtracted in 200 components = -0.0135985 Jy
! Clean residual min=-0.002415 max=0.002205 Jy/beam
! Clean residual mean=-0.000004 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.0460963 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.0460963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064755Jy  sigma=0.072971
! Fit after  self-cal, rms=0.064804Jy  sigma=0.072962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118274 Jy
! Component: 100  -  total flux cleaned = -0.000277977 Jy
! Component: 150  -  total flux cleaned = -0.000374315 Jy
! Component: 200  -  total flux cleaned = -0.000428314 Jy
! Total flux subtracted in 200 components = -0.000428314 Jy
! Clean residual min=-0.002408 max=0.002165 Jy/beam
! Clean residual mean=-0.000004 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.045668 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 50 components and 0.045668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064724Jy  sigma=0.073054
! Fit after  self-cal, rms=0.064731Jy  sigma=0.073050
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064731Jy  sigma=0.073050
! Fit after  self-cal, rms=0.054186Jy  sigma=0.070872
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=11.44 mas, bpa=6.135 degrees
! Estimated noise=5.73455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00840019 Jy
! Component: 100  -  total flux cleaned = -0.0101346 Jy
! Component: 150  -  total flux cleaned = -0.0102176 Jy
! Component: 200  -  total flux cleaned = -0.010323 Jy
! Total flux subtracted in 200 components = -0.010323 Jy
! Clean residual min=-0.001863 max=0.001728 Jy/beam
! Clean residual mean=-0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0353449 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.0353449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050718Jy  sigma=0.072941
! Fit after  self-cal, rms=0.050725Jy  sigma=0.072938
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.06946e-05 Jy
! Component: 100  -  total flux cleaned = -0.000124495 Jy
! Component: 150  -  total flux cleaned = -0.000181651 Jy
! Component: 200  -  total flux cleaned = -0.000229442 Jy
! Total flux subtracted in 200 components = -0.000229442 Jy
! Clean residual min=-0.001863 max=0.001708 Jy/beam
! Clean residual mean=-0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0351155 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.0351155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050675Jy  sigma=0.073015
! Fit after  self-cal, rms=0.050671Jy  sigma=0.073013
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050671Jy  sigma=0.073013
! Fit after  self-cal, rms=0.042295Jy  sigma=0.070845
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.516 mas, bmaj=13.02 mas, bpa=4.79 degrees
! Estimated noise=5.71455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00620647 Jy
! Component: 100  -  total flux cleaned = -0.00756239 Jy
! Component: 150  -  total flux cleaned = -0.00795954 Jy
! Component: 200  -  total flux cleaned = -0.00804598 Jy
! Total flux subtracted in 200 components = -0.00804598 Jy
! Clean residual min=-0.001438 max=0.001635 Jy/beam
! Clean residual mean=-0.000006 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.0270695 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.0270695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039700Jy  sigma=0.072735
! Fit after  self-cal, rms=0.039698Jy  sigma=0.072725
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152586 Jy
! Component: 100  -  total flux cleaned = -0.000167274 Jy
! Component: 150  -  total flux cleaned = -0.000167055 Jy
! Component: 200  -  total flux cleaned = -0.00016125 Jy
! Total flux subtracted in 200 components = -0.00016125 Jy
! Clean residual min=-0.001450 max=0.001610 Jy/beam
! Clean residual mean=-0.000006 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.0269083 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 89 components and 0.0269083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039674Jy  sigma=0.072772
! Fit after  self-cal, rms=0.039671Jy  sigma=0.072770
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=11.45 mas, bpa=6.184 degrees
! Estimated noise=4.46825 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.27 x 11.45 at 6.184 degrees (North through East)
! Clean map  min=-0.0014183  max=0.02912 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.553 mas, bmaj=10.54 mas, bpa=7.727 degrees
! Estimated noise=9.38875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232496 Jy
! Component: 100  -  total flux cleaned = 0.0263295 Jy
! Component: 150  -  total flux cleaned = 0.0262507 Jy
! Component: 200  -  total flux cleaned = 0.0261744 Jy
! Total flux subtracted in 200 components = 0.0261744 Jy
! Clean residual min=-0.003555 max=0.003347 Jy/beam
! Clean residual mean=0.000000 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.0261744 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0261744 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=11.45 mas, bpa=6.184 degrees
! Estimated noise=4.46825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.5445e-05 Jy
! Component: 100  -  total flux cleaned = 0.00025326 Jy
! Component: 150  -  total flux cleaned = 0.000293484 Jy
! Component: 200  -  total flux cleaned = 0.000326399 Jy
! Total flux subtracted in 200 components = 0.000326399 Jy
! Clean residual min=-0.001463 max=0.001285 Jy/beam
! Clean residual mean=-0.000003 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0265008 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.0265008 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.516 mas, bmaj=13.02 mas, bpa=4.79 degrees
! Estimated noise=5.71455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.5214e-05 Jy
! Component: 100  -  total flux cleaned = 0.000130113 Jy
! Component: 150  -  total flux cleaned = 0.000141296 Jy
! Component: 200  -  total flux cleaned = 0.000150085 Jy
! Total flux subtracted in 200 components = 0.000150085 Jy
! Clean residual min=-0.001522 max=0.001545 Jy/beam
! Clean residual mean=-0.000006 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0266508 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.15251e-06 Jy
! Component: 100  -  total flux cleaned = 1.59722e-05 Jy
! Component: 150  -  total flux cleaned = 3.03926e-05 Jy
! Component: 200  -  total flux cleaned = 4.40241e-05 Jy
! Total flux subtracted in 200 components = 4.40241e-05 Jy
! Clean residual min=-0.001519 max=0.001548 Jy/beam
! Clean residual mean=-0.000006 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0266949 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 0.0266949 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=11.45 mas, bpa=6.184 degrees
! Estimated noise=4.46825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.80538e-05 Jy
! Component: 100  -  total flux cleaned = -5.96424e-05 Jy
! Component: 150  -  total flux cleaned = -6.92423e-05 Jy
! Component: 200  -  total flux cleaned = -6.07398e-05 Jy
! Total flux subtracted in 200 components = -6.07398e-05 Jy
! Clean residual min=-0.001447 max=0.001307 Jy/beam
! Clean residual mean=-0.000003 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0266341 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.0266341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039545Jy  sigma=0.073078
! Fit after  self-cal, rms=0.039530Jy  sigma=0.073068
wmodel /g0/scr/pima/npcsa_uvs/J0714+8151_S_map.mod
! Writing 57 model components to file: /g0/scr/pima/npcsa_uvs/J0714+8151_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0714+8151_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0714+8151_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0714+8151_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0714+8151_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000422446 Jy
! Component: 100  -  total flux cleaned = -0.000576217 Jy
! Component: 150  -  total flux cleaned = -0.000717502 Jy
! Component: 200  -  total flux cleaned = -0.000849959 Jy
! Component: 250  -  total flux cleaned = -0.00093918 Jy
! Component: 300  -  total flux cleaned = -0.00104145 Jy
! Component: 350  -  total flux cleaned = -0.00118768 Jy
! Component: 400  -  total flux cleaned = -0.00131276 Jy
! Component: 450  -  total flux cleaned = -0.00149379 Jy
! Component: 500  -  total flux cleaned = -0.00159601 Jy
! Component: 550  -  total flux cleaned = -0.00172353 Jy
! Component: 600  -  total flux cleaned = -0.00181969 Jy
! Component: 650  -  total flux cleaned = -0.00190004 Jy
! Component: 700  -  total flux cleaned = -0.00199176 Jy
! Component: 750  -  total flux cleaned = -0.00201721 Jy
! Component: 800  -  total flux cleaned = -0.00206704 Jy
! Component: 850  -  total flux cleaned = -0.00206685 Jy
! Component: 900  -  total flux cleaned = -0.00207878 Jy
! Component: 950  -  total flux cleaned = -0.0020552 Jy
! Component: 1000  -  total flux cleaned = -0.00205531 Jy
! Component: 1050  -  total flux cleaned = -0.00204383 Jy
! Component: 1100  -  total flux cleaned = -0.00204364 Jy
! Component: 1150  -  total flux cleaned = -0.00199926 Jy
! Component: 1200  -  total flux cleaned = -0.00195576 Jy
! Component: 1250  -  total flux cleaned = -0.00194503 Jy
! Component: 1300  -  total flux cleaned = -0.00189231 Jy
! Component: 1350  -  total flux cleaned = -0.00187145 Jy
! Component: 1400  -  total flux cleaned = -0.00184054 Jy
! Component: 1450  -  total flux cleaned = -0.00181013 Jy
! Component: 1500  -  total flux cleaned = -0.00185002 Jy
! Component: 1550  -  total flux cleaned = -0.00183003 Jy
! Component: 1600  -  total flux cleaned = -0.00183015 Jy
! Component: 1650  -  total flux cleaned = -0.00184933 Jy
! Component: 1700  -  total flux cleaned = -0.00184929 Jy
! Component: 1750  -  total flux cleaned = -0.00184916 Jy
! Component: 1800  -  total flux cleaned = -0.00184897 Jy
! Component: 1850  -  total flux cleaned = -0.00183966 Jy
! Component: 1900  -  total flux cleaned = -0.00184861 Jy
! Component: 1950  -  total flux cleaned = -0.00182131 Jy
! Component: 2000  -  total flux cleaned = -0.0018212 Jy
! Component: 2050  -  total flux cleaned = -0.00180337 Jy
! Component: 2100  -  total flux cleaned = -0.00180345 Jy
! Component: 2150  -  total flux cleaned = -0.00182946 Jy
! Component: 2200  -  total flux cleaned = -0.00182074 Jy
! Component: 2250  -  total flux cleaned = -0.0018208 Jy
! Component: 2300  -  total flux cleaned = -0.0018208 Jy
! Component: 2350  -  total flux cleaned = -0.00182087 Jy
! Component: 2400  -  total flux cleaned = -0.00184574 Jy
! Component: 2450  -  total flux cleaned = -0.00187862 Jy
! Component: 2500  -  total flux cleaned = -0.00187858 Jy
! Component: 2550  -  total flux cleaned = -0.00189482 Jy
! Component: 2600  -  total flux cleaned = -0.00191885 Jy
! Component: 2650  -  total flux cleaned = -0.00197441 Jy
! Component: 2700  -  total flux cleaned = -0.00196648 Jy
! Component: 2750  -  total flux cleaned = -0.00200556 Jy
! Component: 2800  -  total flux cleaned = -0.00204417 Jy
! Component: 2850  -  total flux cleaned = -0.00205948 Jy
! Component: 2900  -  total flux cleaned = -0.0020898 Jy
! Component: 2950  -  total flux cleaned = -0.00208217 Jy
! Component: 3000  -  total flux cleaned = -0.0021046 Jy
! Component: 3050  -  total flux cleaned = -0.00212688 Jy
! Component: 3100  -  total flux cleaned = -0.00214899 Jy
! Component: 3150  -  total flux cleaned = -0.00215629 Jy
! Component: 3200  -  total flux cleaned = -0.0021636 Jy
! Component: 3250  -  total flux cleaned = -0.00220698 Jy
! Component: 3300  -  total flux cleaned = -0.00221421 Jy
! Component: 3350  -  total flux cleaned = -0.00224273 Jy
! Component: 3400  -  total flux cleaned = -0.00225685 Jy
! Component: 3450  -  total flux cleaned = -0.00227099 Jy
! Component: 3500  -  total flux cleaned = -0.00228487 Jy
! Component: 3550  -  total flux cleaned = -0.00230566 Jy
! Component: 3600  -  total flux cleaned = -0.00231944 Jy
! Component: 3650  -  total flux cleaned = -0.00233305 Jy
! Component: 3700  -  total flux cleaned = -0.00233309 Jy
! Component: 3750  -  total flux cleaned = -0.00237361 Jy
! Component: 3800  -  total flux cleaned = -0.00239381 Jy
! Component: 3850  -  total flux cleaned = -0.00241391 Jy
! Component: 3900  -  total flux cleaned = -0.00244711 Jy
! Component: 3950  -  total flux cleaned = -0.00246032 Jy
! Component: 4000  -  total flux cleaned = -0.00249321 Jy
! Component: 4050  -  total flux cleaned = -0.00249321 Jy
! Total flux subtracted in 4096 components = -0.00251922 Jy
! Clean residual min=-0.000580 max=0.000361 Jy/beam
! Clean residual mean=-0.000001 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0241149 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 357 components and 0.0241149 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0714+8151_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.27 x 11.45 at 6.184 degrees (North through East)
! Clean map  min=-0.0011225  max=0.028987 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0714+8151_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0289867 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000119922 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.24115 1.24115 2.4823 4.96459 9.92918 19.8584 39.7167 79.4335
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.028 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0714+8151_S_uvs.log closed on Sun Oct  6 10:31:56 2013