! Started logfile: /g0/scr/pima/npcsa_uvs/J0638+8411_S_uvs.log on Sun Oct  6 10:31:36 2013
obs /g0/scr/pima/npcsa_uvs/J0638+8411_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0638+8411_S_uva.fits
! AN table 1: 55 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J0638+8411
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1540 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0638+8411_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.989720Jy  sigma=1.140618
! Fit after  self-cal, rms=0.863571Jy  sigma=0.976231
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.55 mas, bmaj=43.12 mas, bpa=15.52 degrees
! Estimated noise=21.9381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131154 Jy
! Component: 100  -  total flux cleaned = 0.165557 Jy
! Total flux subtracted in 100 components = 0.165557 Jy
! Clean residual min=-0.021764 max=0.021692 Jy/beam
! Clean residual mean=-0.000109 rms=0.009829 Jy/beam
! Combined flux in latest and established models = 0.165557 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.165557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101459Jy  sigma=0.130524
! Fit after  self-cal, rms=0.101573Jy  sigma=0.130016
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.98 mas, bmaj=44.6 mas, bpa=4.609 degrees
! Estimated noise=17.6714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00758288 Jy
! Component: 100  -  total flux cleaned = 0.00615084 Jy
! Component: 150  -  total flux cleaned = 0.0105072 Jy
! Component: 200  -  total flux cleaned = 0.0108019 Jy
! Total flux subtracted in 200 components = 0.0108019 Jy
! Clean residual min=-0.004695 max=0.004685 Jy/beam
! Clean residual mean=-0.000016 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 0.176359 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 126 components and 0.176359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097125Jy  sigma=0.110555
! Fit after  self-cal, rms=0.097253Jy  sigma=0.110231
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        0.94     LA        1.16     NL        1.00*    
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.85     KP        0.96     LA        1.13     NL        1.00*    
!   PT        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.89     LA        0.87     NL        1.00*    
!   PT        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        1.02     LA        0.73     NL        1.00*    
!   PT        0.88     
! 
! 
! Fit before self-cal, rms=0.097253Jy  sigma=0.110231
! Fit after  self-cal, rms=0.089224Jy  sigma=0.096110
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.89 mas, bmaj=44.2 mas, bpa=5.4 degrees
! Estimated noise=15.6747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0135024 Jy
! Component: 100  -  total flux cleaned = -0.0151735 Jy
! Component: 150  -  total flux cleaned = -0.0159718 Jy
! Component: 200  -  total flux cleaned = -0.016634 Jy
! Total flux subtracted in 200 components = -0.016634 Jy
! Clean residual min=-0.001237 max=0.001242 Jy/beam
! Clean residual mean=-0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.159725 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 199 components and 0.159725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082710Jy  sigma=0.098578
! Fit after  self-cal, rms=0.082870Jy  sigma=0.098423
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082870Jy  sigma=0.098423
! Fit after  self-cal, rms=0.079629Jy  sigma=0.095889
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.72 mas, bmaj=43.8 mas, bpa=6.049 degrees
! Estimated noise=14.2372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115576 Jy
! Component: 100  -  total flux cleaned = -0.0132611 Jy
! Component: 150  -  total flux cleaned = -0.0147182 Jy
! Component: 200  -  total flux cleaned = -0.015286 Jy
! Total flux subtracted in 200 components = -0.015286 Jy
! Clean residual min=-0.001079 max=0.001079 Jy/beam
! Clean residual mean=-0.000010 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.144439 Jy
selfcal
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 280 components and 0.144439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074374Jy  sigma=0.098395
! Fit after  self-cal, rms=0.074375Jy  sigma=0.098377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000618112 Jy
! Component: 100  -  total flux cleaned = -0.00094289 Jy
! Component: 150  -  total flux cleaned = -0.00119554 Jy
! Component: 200  -  total flux cleaned = -0.00151344 Jy
! Total flux subtracted in 200 components = -0.00151344 Jy
! Clean residual min=-0.000645 max=0.000656 Jy/beam
! Clean residual mean=-0.000004 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.142925 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 375 components and 0.142925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074133Jy  sigma=0.098475
! Fit after  self-cal, rms=0.074148Jy  sigma=0.098470
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074148Jy  sigma=0.098470
! Fit after  self-cal, rms=0.070925Jy  sigma=0.095860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.51 mas, bmaj=43.38 mas, bpa=6.705 degrees
! Estimated noise=12.8768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00968249 Jy
! Component: 100  -  total flux cleaned = -0.0100915 Jy
! Component: 150  -  total flux cleaned = -0.0104498 Jy
! Component: 200  -  total flux cleaned = -0.0103436 Jy
! Total flux subtracted in 200 components = -0.0103436 Jy
! Clean residual min=-0.000975 max=0.000967 Jy/beam
! Clean residual mean=-0.000012 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.132582 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 437 components and 0.132582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066511Jy  sigma=0.098340
! Fit after  self-cal, rms=0.066513Jy  sigma=0.098334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000832709 Jy
! Component: 100  -  total flux cleaned = -0.00123189 Jy
! Component: 150  -  total flux cleaned = -0.00139621 Jy
! Component: 200  -  total flux cleaned = -0.00146916 Jy
! Total flux subtracted in 200 components = -0.00146916 Jy
! Clean residual min=-0.000389 max=0.000393 Jy/beam
! Clean residual mean=-0.000004 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.131112 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 530 components and 0.131112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066385Jy  sigma=0.098430
! Fit after  self-cal, rms=0.066397Jy  sigma=0.098427
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066397Jy  sigma=0.098427
! Fit after  self-cal, rms=0.063582Jy  sigma=0.095840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.59 mas, bmaj=42.98 mas, bpa=7.251 degrees
! Estimated noise=11.5871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00849721 Jy
! Component: 100  -  total flux cleaned = -0.00892154 Jy
! Component: 150  -  total flux cleaned = -0.00900231 Jy
! Component: 200  -  total flux cleaned = -0.00895287 Jy
! Total flux subtracted in 200 components = -0.00895287 Jy
! Clean residual min=-0.000792 max=0.000793 Jy/beam
! Clean residual mean=-0.000008 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.12216 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 593 components and 0.12216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059692Jy  sigma=0.098304
! Fit after  self-cal, rms=0.059695Jy  sigma=0.098299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000355324 Jy
! Component: 100  -  total flux cleaned = -0.000952377 Jy
! Component: 150  -  total flux cleaned = -0.00117277 Jy
! Component: 200  -  total flux cleaned = -0.0011941 Jy
! Total flux subtracted in 200 components = -0.0011941 Jy
! Clean residual min=-0.000380 max=0.000375 Jy/beam
! Clean residual mean=-0.000004 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.120965 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 648 components and 0.120966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059645Jy  sigma=0.098371
! Fit after  self-cal, rms=0.059650Jy  sigma=0.098369
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=23.31 mas, bmaj=42.98 mas, bpa=7.353 degrees
! Estimated noise=11.6383 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.31 x 42.98 at 7.353 degrees (North through East)
! Clean map  min=-0.016206  max=0.089238 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=21.84 mas, bmaj=42.61 mas, bpa=17.44 degrees
! Estimated noise=13.8448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0790542 Jy
! Component: 100  -  total flux cleaned = 0.102864 Jy
! Component: 150  -  total flux cleaned = 0.105722 Jy
! Component: 200  -  total flux cleaned = 0.109668 Jy
! Total flux subtracted in 200 components = 0.109668 Jy
! Clean residual min=-0.009727 max=0.009667 Jy/beam
! Clean residual mean=-0.000079 rms=0.004147 Jy/beam
! Combined flux in latest and established models = 0.109668 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 72 model components to the UV plane model.
! The established model now contains 72 components and 0.109668 Jy
! Inverting map and beam 
! Estimated beam: bmin=23.31 mas, bmaj=42.98 mas, bpa=7.353 degrees
! Estimated noise=11.6383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00216916 Jy
! Component: 100  -  total flux cleaned = -0.00347888 Jy
! Component: 150  -  total flux cleaned = -0.00524319 Jy
! Component: 200  -  total flux cleaned = -0.00508622 Jy
! Total flux subtracted in 200 components = -0.00508622 Jy
! Clean residual min=-0.002680 max=0.002610 Jy/beam
! Clean residual mean=-0.000043 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.104581 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 195 components and 0.104581 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.59 mas, bmaj=42.98 mas, bpa=7.251 degrees
! Estimated noise=11.5871 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00235154 Jy
! Component: 100  -  total flux cleaned = -0.00383631 Jy
! Component: 150  -  total flux cleaned = -0.00399284 Jy
! Component: 200  -  total flux cleaned = -0.00391816 Jy
! Total flux subtracted in 200 components = -0.00391816 Jy
! Clean residual min=-0.001205 max=0.001222 Jy/beam
! Clean residual mean=-0.000007 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.100663 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.18722e-05 Jy
! Component: 100  -  total flux cleaned = -0.000227812 Jy
! Component: 150  -  total flux cleaned = -0.000381278 Jy
! Component: 200  -  total flux cleaned = -0.000462589 Jy
! Total flux subtracted in 200 components = -0.000462589 Jy
! Clean residual min=-0.001381 max=0.001385 Jy/beam
! Clean residual mean=0.000000 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.100201 Jy
! Adding 124 model components to the UV plane model.
! The established model now contains 318 components and 0.100201 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=23.31 mas, bmaj=42.98 mas, bpa=7.353 degrees
! Estimated noise=11.6383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149491 Jy
! Component: 100  -  total flux cleaned = 0.000334779 Jy
! Component: 150  -  total flux cleaned = 0.000332525 Jy
! Component: 200  -  total flux cleaned = 0.000292801 Jy
! Total flux subtracted in 200 components = 0.000292801 Jy
! Clean residual min=-0.000682 max=0.000671 Jy/beam
! Clean residual mean=-0.000001 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.100493 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 376 components and 0.100493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059668Jy  sigma=0.098724
! Fit after  self-cal, rms=0.059631Jy  sigma=0.098649
wmodel /g0/scr/pima/npcsa_uvs/J0638+8411_S_map.mod
! Writing 376 model components to file: /g0/scr/pima/npcsa_uvs/J0638+8411_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0638+8411_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0638+8411_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0638+8411_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsa_uvs/J0638+8411_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.31 x 42.98 at 7.353 degrees (North through East)
! Clean map  min=-0.018887  max=0.080316 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0638+8411_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0803158 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000155935 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.582457 0.582457 1.16491 2.32983 4.65966 9.31932 18.6386 37.2773 74.5545
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.08 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0638+8411_S_uvs.log closed on Sun Oct  6 10:31:40 2013