! Started logfile: /g0/scr/pima/npcsa_uvs/J0543+8118_S_uvs.log on Sun Oct 6 10:31:14 2013 obs /g0/scr/pima/npcsa_uvs/J0543+8118_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0543+8118_S_uva.fits ! AN table 1: 54 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.714286 visibilities/baseline/integration-bin. ! Found source: J0543+8118 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3240 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0543+8118_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.012604Jy sigma=0.837211 ! Fit after self-cal, rms=0.932806Jy sigma=0.718267 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=12.49 mas, bpa=73.64 degrees ! Estimated noise=30.4402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0756175 Jy ! Component: 100 - total flux cleaned = 0.090338 Jy ! Total flux subtracted in 100 components = 0.090338 Jy ! Clean residual min=-0.009189 max=0.009152 Jy/beam ! Clean residual mean=-0.000006 rms=0.003210 Jy/beam ! Combined flux in latest and established models = 0.090338 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.090338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090025Jy sigma=0.079872 ! Fit after self-cal, rms=0.087747Jy sigma=0.078523 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.55 mas, bmaj=13.98 mas, bpa=9.647 degrees ! Estimated noise=17.1023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560573 Jy ! Component: 100 - total flux cleaned = 0.00795573 Jy ! Component: 150 - total flux cleaned = 0.00766688 Jy ! Component: 200 - total flux cleaned = 0.00598512 Jy ! Total flux subtracted in 200 components = 0.00598512 Jy ! Clean residual min=-0.003644 max=0.003619 Jy/beam ! Clean residual mean=0.000005 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.0963231 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 105 components and 0.0963231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089202Jy sigma=0.073200 ! Fit after self-cal, rms=0.088858Jy sigma=0.073058 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.83 KP 0.93 LA 1.01 ! NL 0.94 OV 0.90 PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.90 KP 0.83 LA 0.99 ! NL 0.87 OV 1.01 PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 KP 0.91 LA 0.82 ! NL 0.92 OV 1.03 PT 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 KP 0.84 LA 0.64 ! NL 0.98 OV 0.79 PT 0.86 ! ! ! Fit before self-cal, rms=0.088858Jy sigma=0.073058 ! Fit after self-cal, rms=0.078250Jy sigma=0.066804 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.56 mas, bmaj=14.18 mas, bpa=10.57 degrees ! Estimated noise=13.7535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0144441 Jy ! Component: 100 - total flux cleaned = -0.0150895 Jy ! Component: 150 - total flux cleaned = -0.0135585 Jy ! Component: 200 - total flux cleaned = -0.0122476 Jy ! Total flux subtracted in 200 components = -0.0122476 Jy ! Clean residual min=-0.001012 max=0.001023 Jy/beam ! Clean residual mean=0.000004 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0840754 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 149 components and 0.0840755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070655Jy sigma=0.069140 ! Fit after self-cal, rms=0.070610Jy sigma=0.068800 ! Inverting map ! Added new window around map position (-113, 57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193135 Jy ! Component: 100 - total flux cleaned = 0.00289177 Jy ! Component: 150 - total flux cleaned = 0.00339512 Jy ! Component: 200 - total flux cleaned = 0.00359106 Jy ! Total flux subtracted in 200 components = 0.00359106 Jy ! Clean residual min=-0.001488 max=0.001549 Jy/beam ! Clean residual mean=0.000000 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0876665 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 190 components and 0.0876665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070423Jy sigma=0.068878 ! Fit after self-cal, rms=0.070395Jy sigma=0.068854 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070395Jy sigma=0.068854 ! Fit after self-cal, rms=0.064365Jy sigma=0.066190 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.53 mas, bmaj=14.12 mas, bpa=8.696 degrees ! Estimated noise=11.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200578 Jy ! Component: 100 - total flux cleaned = 0.00255398 Jy ! Component: 150 - total flux cleaned = 0.00297847 Jy ! Component: 200 - total flux cleaned = 0.00328648 Jy ! Total flux subtracted in 200 components = 0.00328648 Jy ! Clean residual min=-0.012877 max=0.005777 Jy/beam ! Clean residual mean=0.000005 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.090953 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 229 components and 0.090953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063485Jy sigma=0.066361 ! Fit after self-cal, rms=0.063349Jy sigma=0.066176 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103595 Jy ! Component: 100 - total flux cleaned = 0.0013398 Jy ! Component: 150 - total flux cleaned = 0.00168133 Jy ! Component: 200 - total flux cleaned = 0.00193213 Jy ! Total flux subtracted in 200 components = 0.00193213 Jy ! Clean residual min=-0.011684 max=0.005495 Jy/beam ! Clean residual mean=0.000002 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 0.0928851 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 249 components and 0.0928851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062880Jy sigma=0.066332 ! Fit after self-cal, rms=0.062854Jy sigma=0.066301 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062854Jy sigma=0.066301 ! Fit after self-cal, rms=0.061998Jy sigma=0.066164 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.52 mas, bmaj=14 mas, bpa=9.751 degrees ! Estimated noise=10.9092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000930143 Jy ! Component: 100 - total flux cleaned = -0.000776383 Jy ! Component: 150 - total flux cleaned = -0.000492753 Jy ! Component: 200 - total flux cleaned = -0.000234276 Jy ! Total flux subtracted in 200 components = -0.000234276 Jy ! Clean residual min=-0.012887 max=0.005989 Jy/beam ! Clean residual mean=0.000002 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.0926508 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 263 components and 0.0926508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061525Jy sigma=0.066299 ! Fit after self-cal, rms=0.061512Jy sigma=0.066273 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35748e-05 Jy ! Component: 100 - total flux cleaned = 0.000271928 Jy ! Component: 150 - total flux cleaned = 0.000330223 Jy ! Component: 200 - total flux cleaned = 0.000544693 Jy ! Total flux subtracted in 200 components = 0.000544693 Jy ! Clean residual min=-0.012142 max=0.005942 Jy/beam ! Clean residual mean=0.000001 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.0931955 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 271 components and 0.0931955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061208Jy sigma=0.066376 ! Fit after self-cal, rms=0.061162Jy sigma=0.066344 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061162Jy sigma=0.066344 ! Fit after self-cal, rms=0.060677Jy sigma=0.066276 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.2 mas, bmaj=15.04 mas, bpa=12.47 degrees ! Estimated noise=10.6842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000806177 Jy ! Component: 100 - total flux cleaned = -0.000740107 Jy ! Component: 150 - total flux cleaned = -0.000679452 Jy ! Component: 200 - total flux cleaned = -0.00067859 Jy ! Total flux subtracted in 200 components = -0.00067859 Jy ! Clean residual min=-0.012761 max=0.006218 Jy/beam ! Clean residual mean=-0.000000 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.0925169 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 277 components and 0.0925169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060367Jy sigma=0.066371 ! Fit after self-cal, rms=0.060365Jy sigma=0.066359 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.86461e-05 Jy ! Component: 100 - total flux cleaned = 5.66049e-05 Jy ! Component: 150 - total flux cleaned = 5.65372e-05 Jy ! Component: 200 - total flux cleaned = 5.57496e-05 Jy ! Total flux subtracted in 200 components = 5.57496e-05 Jy ! Clean residual min=-0.012225 max=0.006193 Jy/beam ! Clean residual mean=0.000000 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.0925726 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 282 components and 0.0925726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060151Jy sigma=0.066424 ! Fit after self-cal, rms=0.060147Jy sigma=0.066417 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=12.5 mas, bmaj=13.88 mas, bpa=10.51 degrees ! Estimated noise=10.6525 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.5 x 13.88 at 10.51 degrees (North through East) ! Clean map min=-0.0087107 max=0.064196 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.32 mas, bmaj=12.49 mas, bpa=71.96 degrees ! Estimated noise=18.8971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00707505 Jy ! Component: 100 - total flux cleaned = 0.00498996 Jy ! Component: 150 - total flux cleaned = 0.00251516 Jy ! Component: 200 - total flux cleaned = 5.65032e-05 Jy ! Total flux subtracted in 200 components = 5.65032e-05 Jy ! Clean residual min=-0.021720 max=0.046864 Jy/beam ! Clean residual mean=-0.000025 rms=0.008357 Jy/beam ! Combined flux in latest and established models = 5.65009e-05 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 5.65009e-05 Jy ! Inverting map and beam ! Estimated beam: bmin=12.5 mas, bmaj=13.88 mas, bpa=10.51 degrees ! Estimated noise=10.6525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436042 Jy ! Component: 100 - total flux cleaned = 0.0489499 Jy ! Component: 150 - total flux cleaned = 0.053747 Jy ! Component: 200 - total flux cleaned = 0.0582316 Jy ! Total flux subtracted in 200 components = 0.0582316 Jy ! Clean residual min=-0.008664 max=0.007065 Jy/beam ! Clean residual mean=0.000002 rms=0.002645 Jy/beam ! Combined flux in latest and established models = 0.0582881 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 78 components and 0.0582881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.2 mas, bmaj=15.04 mas, bpa=12.47 degrees ! Estimated noise=10.6842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409446 Jy ! Component: 100 - total flux cleaned = 0.00684024 Jy ! Component: 150 - total flux cleaned = 0.00913874 Jy ! Component: 200 - total flux cleaned = 0.0109643 Jy ! Total flux subtracted in 200 components = 0.0109643 Jy ! Clean residual min=-0.006066 max=0.005026 Jy/beam ! Clean residual mean=0.000001 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.0692524 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174148 Jy ! Component: 100 - total flux cleaned = 0.00328761 Jy ! Component: 150 - total flux cleaned = 0.00490011 Jy ! Component: 200 - total flux cleaned = 0.00623009 Jy ! Total flux subtracted in 200 components = 0.00623009 Jy ! Clean residual min=-0.004814 max=0.004150 Jy/beam ! Clean residual mean=0.000001 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.0754825 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 173 components and 0.0754825 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=12.5 mas, bmaj=13.88 mas, bpa=10.51 degrees ! Estimated noise=10.6525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013543 Jy ! Component: 100 - total flux cleaned = 0.00228842 Jy ! Component: 150 - total flux cleaned = 0.00313944 Jy ! Component: 200 - total flux cleaned = 0.00398994 Jy ! Total flux subtracted in 200 components = 0.00398994 Jy ! Clean residual min=-0.004076 max=0.003459 Jy/beam ! Clean residual mean=-0.000001 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0794724 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 199 components and 0.0794724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054837Jy sigma=0.070675 ! Fit after self-cal, rms=0.054662Jy sigma=0.070023 wmodel /g0/scr/pima/npcsa_uvs/J0543+8118_S_map.mod ! Writing 199 model components to file: /g0/scr/pima/npcsa_uvs/J0543+8118_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J0543+8118_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0543+8118_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J0543+8118_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J0543+8118_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000778013 Jy ! Component: 100 - total flux cleaned = -0.000820328 Jy ! Component: 150 - total flux cleaned = -0.000716898 Jy ! Component: 200 - total flux cleaned = -0.00065564 Jy ! Component: 250 - total flux cleaned = -0.000573719 Jy ! Component: 300 - total flux cleaned = -0.000600413 Jy ! Component: 350 - total flux cleaned = -0.000552372 Jy ! Component: 400 - total flux cleaned = -0.000462009 Jy ! Component: 450 - total flux cleaned = -0.000335129 Jy ! Component: 500 - total flux cleaned = -0.000154758 Jy ! Component: 550 - total flux cleaned = -4.02172e-05 Jy ! Component: 600 - total flux cleaned = 8.78434e-05 Jy ! Component: 650 - total flux cleaned = 0.000228327 Jy ! Component: 700 - total flux cleaned = 0.0003301 Jy ! Component: 750 - total flux cleaned = 0.000494082 Jy ! Component: 800 - total flux cleaned = 0.000621042 Jy ! Component: 850 - total flux cleaned = 0.000744341 Jy ! Component: 900 - total flux cleaned = 0.000893739 Jy ! Component: 950 - total flux cleaned = 0.000994922 Jy ! Component: 1000 - total flux cleaned = 0.00105176 Jy ! Component: 1050 - total flux cleaned = 0.0011893 Jy ! Component: 1100 - total flux cleaned = 0.00132315 Jy ! Component: 1150 - total flux cleaned = 0.00141468 Jy ! Component: 1200 - total flux cleaned = 0.00147848 Jy ! Component: 1250 - total flux cleaned = 0.00154107 Jy ! Component: 1300 - total flux cleaned = 0.00157774 Jy ! Component: 1350 - total flux cleaned = 0.00156548 Jy ! Component: 1400 - total flux cleaned = 0.00156534 Jy ! Component: 1450 - total flux cleaned = 0.00157699 Jy ! Component: 1500 - total flux cleaned = 0.00155355 Jy ! Component: 1550 - total flux cleaned = 0.00155357 Jy ! Component: 1600 - total flux cleaned = 0.0015764 Jy ! Component: 1650 - total flux cleaned = 0.00156497 Jy ! Component: 1700 - total flux cleaned = 0.00160963 Jy ! Component: 1750 - total flux cleaned = 0.00168744 Jy ! Component: 1800 - total flux cleaned = 0.00176484 Jy ! Component: 1850 - total flux cleaned = 0.00179798 Jy ! Component: 1900 - total flux cleaned = 0.00187471 Jy ! Component: 1950 - total flux cleaned = 0.00192939 Jy ! Component: 2000 - total flux cleaned = 0.00198396 Jy ! Component: 2050 - total flux cleaned = 0.00202743 Jy ! Component: 2100 - total flux cleaned = 0.00208161 Jy ! Component: 2150 - total flux cleaned = 0.00212496 Jy ! Component: 2200 - total flux cleaned = 0.00217894 Jy ! Component: 2250 - total flux cleaned = 0.00222209 Jy ! Component: 2300 - total flux cleaned = 0.00226529 Jy ! Component: 2350 - total flux cleaned = 0.0022977 Jy ! Component: 2400 - total flux cleaned = 0.0023626 Jy ! Component: 2450 - total flux cleaned = 0.00238424 Jy ! Component: 2500 - total flux cleaned = 0.00240593 Jy ! Component: 2550 - total flux cleaned = 0.0024495 Jy ! Component: 2600 - total flux cleaned = 0.00246046 Jy ! Component: 2650 - total flux cleaned = 0.00249344 Jy ! Component: 2700 - total flux cleaned = 0.00251543 Jy ! Component: 2750 - total flux cleaned = 0.00254857 Jy ! Component: 2800 - total flux cleaned = 0.00257076 Jy ! Component: 2850 - total flux cleaned = 0.00260428 Jy ! Component: 2900 - total flux cleaned = 0.00260414 Jy ! Component: 2950 - total flux cleaned = 0.0026155 Jy ! Component: 3000 - total flux cleaned = 0.00261537 Jy ! Component: 3050 - total flux cleaned = 0.0026153 Jy ! Component: 3100 - total flux cleaned = 0.00260393 Jy ! Component: 3150 - total flux cleaned = 0.00259226 Jy ! Component: 3200 - total flux cleaned = 0.00258068 Jy ! Component: 3250 - total flux cleaned = 0.00256888 Jy ! Component: 3300 - total flux cleaned = 0.00255696 Jy ! Component: 3350 - total flux cleaned = 0.00254509 Jy ! Component: 3400 - total flux cleaned = 0.00253298 Jy ! Component: 3450 - total flux cleaned = 0.00252082 Jy ! Component: 3500 - total flux cleaned = 0.00252096 Jy ! Component: 3550 - total flux cleaned = 0.00250863 Jy ! Component: 3600 - total flux cleaned = 0.00249636 Jy ! Component: 3650 - total flux cleaned = 0.00249633 Jy ! Component: 3700 - total flux cleaned = 0.00249634 Jy ! Component: 3750 - total flux cleaned = 0.00249635 Jy ! Component: 3800 - total flux cleaned = 0.00248342 Jy ! Component: 3850 - total flux cleaned = 0.00247044 Jy ! Component: 3900 - total flux cleaned = 0.0024835 Jy ! Component: 3950 - total flux cleaned = 0.0025103 Jy ! Component: 4000 - total flux cleaned = 0.00251018 Jy ! Component: 4050 - total flux cleaned = 0.00255115 Jy ! Total flux subtracted in 4096 components = 0.00255119 Jy ! Clean residual min=-0.000845 max=0.000804 Jy/beam ! Clean residual mean=-0.000002 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0820236 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 491 components and 0.0820236 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J0543+8118_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.5 x 13.88 at 10.51 degrees (North through East) ! Clean map min=-0.0051038 max=0.061416 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0543+8118_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0614161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303415 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4821 1.4821 2.96419 5.92839 11.8568 23.7135 47.4271 94.8542 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J0543+8118_S_uvs.log closed on Sun Oct 6 10:31:18 2013