! Started logfile: /g0/scr/pima/npcsa_uvs/J0508+8432_S_uvs.log on Sun Oct  6 10:31:09 2013
obs /g0/scr/pima/npcsa_uvs/J0508+8432_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0508+8432_S_uva.fits
! AN table 1: 55 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.98303 visibilities/baseline/integration-bin.
! Found source: J0508+8432
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9732 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0508+8432_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031213Jy  sigma=1.887521
! Fit after  self-cal, rms=0.755252Jy  sigma=1.302690
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.269 mas, bmaj=10.46 mas, bpa=3.841 degrees
! Estimated noise=8.45818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.209891 Jy
! Component: 100  -  total flux cleaned = 0.255677 Jy
! Total flux subtracted in 100 components = 0.255677 Jy
! Clean residual min=-0.011243 max=0.013038 Jy/beam
! Clean residual mean=-0.000008 rms=0.002278 Jy/beam
! Combined flux in latest and established models = 0.255677 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.255677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107492Jy  sigma=0.194913
! Fit after  self-cal, rms=0.107489Jy  sigma=0.194902
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.097 mas, bmaj=10.85 mas, bpa=3.165 degrees
! Estimated noise=4.15671 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164395 Jy
! Component: 100  -  total flux cleaned = 0.0229457 Jy
! Component: 150  -  total flux cleaned = 0.0263173 Jy
! Component: 200  -  total flux cleaned = 0.0284809 Jy
! Total flux subtracted in 200 components = 0.0284809 Jy
! Clean residual min=-0.008655 max=0.005204 Jy/beam
! Clean residual mean=0.000008 rms=0.001660 Jy/beam
! Combined flux in latest and established models = 0.284158 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 28 components and 0.284158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108155Jy  sigma=0.186289
! Fit after  self-cal, rms=0.108161Jy  sigma=0.186270
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.92     KP        0.98     
!   LA        1.08     MK        0.89     NL        0.97     OV        0.99     
!   PT        1.08     SC        0.90     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.97     KP        0.96     
!   LA        1.00     MK        0.90     NL        0.97     OV        1.00     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.84     MK        1.06     NL        1.07     OV        1.04     
!   PT        1.09     SC        0.94     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.93     KP        0.90     
!   LA        0.70     MK        1.03     NL        1.00     OV        0.86     
!   PT        0.97     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.108161Jy  sigma=0.186270
! Fit after  self-cal, rms=0.100427Jy  sigma=0.171569
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=10.87 mas, bpa=3.079 degrees
! Estimated noise=3.90349 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0123663 Jy
! Component: 100  -  total flux cleaned = -0.014726 Jy
! Component: 150  -  total flux cleaned = -0.0147282 Jy
! Component: 200  -  total flux cleaned = -0.0146825 Jy
! Total flux subtracted in 200 components = -0.0146825 Jy
! Clean residual min=-0.002916 max=0.002377 Jy/beam
! Clean residual mean=-0.000001 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.269476 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 33 components and 0.269476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096054Jy  sigma=0.174071
! Fit after  self-cal, rms=0.096137Jy  sigma=0.173977
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096137Jy  sigma=0.173977
! Fit after  self-cal, rms=0.094749Jy  sigma=0.171475
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=10.87 mas, bpa=3.09 degrees
! Estimated noise=3.68561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0116697 Jy
! Component: 100  -  total flux cleaned = -0.0140741 Jy
! Component: 150  -  total flux cleaned = -0.0140332 Jy
! Component: 200  -  total flux cleaned = -0.0141049 Jy
! Total flux subtracted in 200 components = -0.0141049 Jy
! Clean residual min=-0.002693 max=0.002305 Jy/beam
! Clean residual mean=-0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.255371 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.255371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090638Jy  sigma=0.174009
! Fit after  self-cal, rms=0.090639Jy  sigma=0.174008
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158305 Jy
! Component: 100  -  total flux cleaned = -0.00020733 Jy
! Component: 150  -  total flux cleaned = -0.000250711 Jy
! Component: 200  -  total flux cleaned = -0.000325628 Jy
! Total flux subtracted in 200 components = -0.000325628 Jy
! Clean residual min=-0.002693 max=0.002339 Jy/beam
! Clean residual mean=-0.000001 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.255045 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.255045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090548Jy  sigma=0.174090
! Fit after  self-cal, rms=0.090548Jy  sigma=0.174089
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090548Jy  sigma=0.174089
! Fit after  self-cal, rms=0.089172Jy  sigma=0.171494
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=10.87 mas, bpa=3.106 degrees
! Estimated noise=3.47527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0109919 Jy
! Component: 100  -  total flux cleaned = -0.0133912 Jy
! Component: 150  -  total flux cleaned = -0.0133929 Jy
! Component: 200  -  total flux cleaned = -0.0133894 Jy
! Total flux subtracted in 200 components = -0.0133894 Jy
! Clean residual min=-0.002502 max=0.002197 Jy/beam
! Clean residual mean=-0.000001 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.241656 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 48 components and 0.241656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085287Jy  sigma=0.174096
! Fit after  self-cal, rms=0.085285Jy  sigma=0.174095
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.25759e-05 Jy
! Component: 100  -  total flux cleaned = -0.000169118 Jy
! Component: 150  -  total flux cleaned = -0.000262025 Jy
! Component: 200  -  total flux cleaned = -0.000331171 Jy
! Total flux subtracted in 200 components = -0.000331171 Jy
! Clean residual min=-0.002515 max=0.002205 Jy/beam
! Clean residual mean=-0.000001 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.241325 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 0.241325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085240Jy  sigma=0.174139
! Fit after  self-cal, rms=0.085241Jy  sigma=0.174139
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085241Jy  sigma=0.174139
! Fit after  self-cal, rms=0.083955Jy  sigma=0.171527
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.194 mas, bmaj=12.6 mas, bpa=0.6323 degrees
! Estimated noise=4.02419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00978921 Jy
! Component: 100  -  total flux cleaned = -0.0119293 Jy
! Component: 150  -  total flux cleaned = -0.012551 Jy
! Component: 200  -  total flux cleaned = -0.0127045 Jy
! Total flux subtracted in 200 components = -0.0127045 Jy
! Clean residual min=-0.002135 max=0.002156 Jy/beam
! Clean residual mean=-0.000001 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.22862 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.22862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080486Jy  sigma=0.173851
! Fit after  self-cal, rms=0.080483Jy  sigma=0.173850
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.29498e-05 Jy
! Component: 100  -  total flux cleaned = -1.27253e-05 Jy
! Component: 150  -  total flux cleaned = -1.20959e-05 Jy
! Component: 200  -  total flux cleaned = -2.03914e-06 Jy
! Total flux subtracted in 200 components = -2.03914e-06 Jy
! Clean residual min=-0.002146 max=0.002145 Jy/beam
! Clean residual mean=-0.000001 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.228618 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.228618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080432Jy  sigma=0.173921
! Fit after  self-cal, rms=0.080433Jy  sigma=0.173921
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=10.87 mas, bpa=3.125 degrees
! Estimated noise=3.27645 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.064 x 10.87 at 3.125 degrees (North through East)
! Clean map  min=-0.0022073  max=0.21424 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=10.48 mas, bpa=3.875 degrees
! Estimated noise=6.64292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.162934 Jy
! Component: 100  -  total flux cleaned = 0.19888 Jy
! Component: 150  -  total flux cleaned = 0.21141 Jy
! Component: 200  -  total flux cleaned = 0.217526 Jy
! Total flux subtracted in 200 components = 0.217526 Jy
! Clean residual min=-0.004821 max=0.005136 Jy/beam
! Clean residual mean=-0.000007 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 0.217526 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.217526 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=10.87 mas, bpa=3.125 degrees
! Estimated noise=3.27645 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473033 Jy
! Component: 100  -  total flux cleaned = 0.00705958 Jy
! Component: 150  -  total flux cleaned = 0.00851391 Jy
! Component: 200  -  total flux cleaned = 0.00946696 Jy
! Total flux subtracted in 200 components = 0.00946696 Jy
! Clean residual min=-0.002516 max=0.002098 Jy/beam
! Clean residual mean=-0.000001 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.226993 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 38 components and 0.226993 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.194 mas, bmaj=12.6 mas, bpa=0.6323 degrees
! Estimated noise=4.02419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128423 Jy
! Component: 100  -  total flux cleaned = 0.00178192 Jy
! Component: 150  -  total flux cleaned = 0.00186013 Jy
! Component: 200  -  total flux cleaned = 0.00189901 Jy
! Total flux subtracted in 200 components = 0.00189901 Jy
! Clean residual min=-0.002204 max=0.002190 Jy/beam
! Clean residual mean=-0.000001 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.228892 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13645e-05 Jy
! Component: 100  -  total flux cleaned = 1.09954e-05 Jy
! Component: 150  -  total flux cleaned = 2.13347e-05 Jy
! Component: 200  -  total flux cleaned = 3.11284e-05 Jy
! Total flux subtracted in 200 components = 3.11284e-05 Jy
! Clean residual min=-0.002187 max=0.002169 Jy/beam
! Clean residual mean=-0.000001 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.228923 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.228923 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=10.87 mas, bpa=3.125 degrees
! Estimated noise=3.27645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000443523 Jy
! Component: 100  -  total flux cleaned = -0.000501397 Jy
! Component: 150  -  total flux cleaned = -0.000550679 Jy
! Component: 200  -  total flux cleaned = -0.000607108 Jy
! Total flux subtracted in 200 components = -0.000607108 Jy
! Clean residual min=-0.002393 max=0.002074 Jy/beam
! Clean residual mean=-0.000001 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.228316 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.228316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080186Jy  sigma=0.174309
! Fit after  self-cal, rms=0.080189Jy  sigma=0.174306
wmodel /g0/scr/pima/npcsa_uvs/J0508+8432_S_map.mod
! Writing 71 model components to file: /g0/scr/pima/npcsa_uvs/J0508+8432_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0508+8432_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0508+8432_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0508+8432_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0508+8432_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000318272 Jy
! Component: 100  -  total flux cleaned = -0.000246365 Jy
! Component: 150  -  total flux cleaned = -7.63074e-05 Jy
! Component: 200  -  total flux cleaned = 5.51919e-05 Jy
! Component: 250  -  total flux cleaned = 0.000180038 Jy
! Component: 300  -  total flux cleaned = 0.000241133 Jy
! Component: 350  -  total flux cleaned = 0.000301041 Jy
! Component: 400  -  total flux cleaned = 0.000359756 Jy
! Component: 450  -  total flux cleaned = 0.00038857 Jy
! Component: 500  -  total flux cleaned = 0.000527036 Jy
! Component: 550  -  total flux cleaned = 0.000635008 Jy
! Component: 600  -  total flux cleaned = 0.000767798 Jy
! Component: 650  -  total flux cleaned = 0.000846233 Jy
! Component: 700  -  total flux cleaned = 0.000897519 Jy
! Component: 750  -  total flux cleaned = 0.000947863 Jy
! Component: 800  -  total flux cleaned = 0.000947664 Jy
! Component: 850  -  total flux cleaned = 0.000947669 Jy
! Component: 900  -  total flux cleaned = 0.000971804 Jy
! Component: 950  -  total flux cleaned = 0.000971345 Jy
! Component: 1000  -  total flux cleaned = 0.000971037 Jy
! Component: 1050  -  total flux cleaned = 0.000947893 Jy
! Component: 1100  -  total flux cleaned = 0.000925172 Jy
! Component: 1150  -  total flux cleaned = 0.000902932 Jy
! Component: 1200  -  total flux cleaned = 0.000880769 Jy
! Component: 1250  -  total flux cleaned = 0.000793218 Jy
! Component: 1300  -  total flux cleaned = 0.000750148 Jy
! Component: 1350  -  total flux cleaned = 0.000750153 Jy
! Component: 1400  -  total flux cleaned = 0.00058109 Jy
! Component: 1450  -  total flux cleaned = 0.000518448 Jy
! Component: 1500  -  total flux cleaned = 0.000497398 Jy
! Component: 1550  -  total flux cleaned = 0.000415148 Jy
! Component: 1600  -  total flux cleaned = 0.000435126 Jy
! Component: 1650  -  total flux cleaned = 0.000394861 Jy
! Component: 1700  -  total flux cleaned = 0.000394623 Jy
! Component: 1750  -  total flux cleaned = 0.000355027 Jy
! Component: 1800  -  total flux cleaned = 0.000413446 Jy
! Component: 1850  -  total flux cleaned = 0.00037467 Jy
! Component: 1900  -  total flux cleaned = 0.000393813 Jy
! Component: 1950  -  total flux cleaned = 0.000431707 Jy
! Component: 2000  -  total flux cleaned = 0.000375275 Jy
! Component: 2050  -  total flux cleaned = 0.00035667 Jy
! Component: 2100  -  total flux cleaned = 0.000393763 Jy
! Component: 2150  -  total flux cleaned = 0.000412139 Jy
! Component: 2200  -  total flux cleaned = 0.000448599 Jy
! Component: 2250  -  total flux cleaned = 0.000466632 Jy
! Component: 2300  -  total flux cleaned = 0.000448565 Jy
! Component: 2350  -  total flux cleaned = 0.00048433 Jy
! Component: 2400  -  total flux cleaned = 0.000519685 Jy
! Component: 2450  -  total flux cleaned = 0.000519475 Jy
! Component: 2500  -  total flux cleaned = 0.000519341 Jy
! Component: 2550  -  total flux cleaned = 0.000519421 Jy
! Component: 2600  -  total flux cleaned = 0.000553936 Jy
! Component: 2650  -  total flux cleaned = 0.000588067 Jy
! Component: 2700  -  total flux cleaned = 0.000604858 Jy
! Component: 2750  -  total flux cleaned = 0.00058813 Jy
! Component: 2800  -  total flux cleaned = 0.000621576 Jy
! Component: 2850  -  total flux cleaned = 0.00058858 Jy
! Component: 2900  -  total flux cleaned = 0.00062159 Jy
! Component: 2950  -  total flux cleaned = 0.000637743 Jy
! Component: 3000  -  total flux cleaned = 0.000588999 Jy
! Component: 3050  -  total flux cleaned = 0.000670065 Jy
! Component: 3100  -  total flux cleaned = 0.000653951 Jy
! Component: 3150  -  total flux cleaned = 0.000765732 Jy
! Component: 3200  -  total flux cleaned = 0.000686353 Jy
! Component: 3250  -  total flux cleaned = 0.000702131 Jy
! Component: 3300  -  total flux cleaned = 0.000717857 Jy
! Component: 3350  -  total flux cleaned = 0.000702191 Jy
! Component: 3400  -  total flux cleaned = 0.000686502 Jy
! Component: 3450  -  total flux cleaned = 0.00068653 Jy
! Component: 3500  -  total flux cleaned = 0.000686611 Jy
! Component: 3550  -  total flux cleaned = 0.000625569 Jy
! Component: 3600  -  total flux cleaned = 0.000640924 Jy
! Component: 3650  -  total flux cleaned = 0.000610812 Jy
! Component: 3700  -  total flux cleaned = 0.000640955 Jy
! Component: 3750  -  total flux cleaned = 0.000670853 Jy
! Component: 3800  -  total flux cleaned = 0.000670853 Jy
! Component: 3850  -  total flux cleaned = 0.000641259 Jy
! Component: 3900  -  total flux cleaned = 0.000670629 Jy
! Component: 3950  -  total flux cleaned = 0.000626855 Jy
! Component: 4000  -  total flux cleaned = 0.000641332 Jy
! Component: 4050  -  total flux cleaned = 0.000713504 Jy
! Total flux subtracted in 4096 components = 0.000727876 Jy
! Clean residual min=-0.001052 max=0.000829 Jy/beam
! Clean residual mean=-0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.229044 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 387 components and 0.229044 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0508+8432_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.064 x 10.87 at 3.125 degrees (North through East)
! Clean map  min=-0.0020072  max=0.2142 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0508+8432_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.214197 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000267258 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.374316 0.374316 0.748633 1.49727 2.99453 5.98906 11.9781 23.9562 47.9125 95.825
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.214 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0508+8432_S_uvs.log closed on Sun Oct  6 10:31:13 2013