! Started logfile: /g0/scr/pima/npcsa_uvs/J0402+8241_X_uvs.log on Sun Oct 6 10:26:21 2013 obs /g0/scr/pima/npcsa_uvs/J0402+8241_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0402+8241_X_uva.fits ! AN table 1: 54 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0402+8241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3024 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0402+8241_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002436Jy sigma=0.754199 ! Fit after self-cal, rms=0.947446Jy sigma=0.677873 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=7.567 mas, bpa=-33.58 degrees ! Estimated noise=47.715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620526 Jy ! Component: 100 - total flux cleaned = 0.0740939 Jy ! Total flux subtracted in 100 components = 0.0740939 Jy ! Clean residual min=-0.009862 max=0.009191 Jy/beam ! Clean residual mean=-0.000016 rms=0.003029 Jy/beam ! Combined flux in latest and established models = 0.0740939 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0740939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072843Jy sigma=0.056495 ! Fit after self-cal, rms=0.070357Jy sigma=0.054885 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.709 mas, bmaj=7.104 mas, bpa=-32.4 degrees ! Estimated noise=20.1185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731307 Jy ! Component: 100 - total flux cleaned = 0.0102594 Jy ! Component: 150 - total flux cleaned = 0.0118135 Jy ! Component: 200 - total flux cleaned = 0.0119928 Jy ! Total flux subtracted in 200 components = 0.0119928 Jy ! Clean residual min=-0.005705 max=0.004736 Jy/beam ! Clean residual mean=-0.000025 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.0860867 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.0860867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072544Jy sigma=0.052588 ! Fit after self-cal, rms=0.072525Jy sigma=0.052573 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.85 KP 1.00 ! LA 0.87 NL 0.99 OV 0.91 PT 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.88 KP 1.05 ! LA 0.88 NL 0.88 OV 0.77 PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.77 KP 0.80 ! LA 0.69 NL 0.90 OV 0.80 PT 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.76 KP 0.80 ! LA 0.85 NL 0.88 OV 0.83 PT 0.99 ! ! ! Fit before self-cal, rms=0.072525Jy sigma=0.052573 ! Fit after self-cal, rms=0.065007Jy sigma=0.049006 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.696 mas, bmaj=7.079 mas, bpa=-32.38 degrees ! Estimated noise=15.9899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0126183 Jy ! Component: 100 - total flux cleaned = -0.0144757 Jy ! Component: 150 - total flux cleaned = -0.0139354 Jy ! Component: 200 - total flux cleaned = -0.0136951 Jy ! Total flux subtracted in 200 components = -0.0136951 Jy ! Clean residual min=-0.002481 max=0.002692 Jy/beam ! Clean residual mean=-0.000011 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0723916 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 0.0723916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057874Jy sigma=0.051179 ! Fit after self-cal, rms=0.057892Jy sigma=0.051067 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057892Jy sigma=0.051067 ! Fit after self-cal, rms=0.052723Jy sigma=0.048794 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.684 mas, bmaj=7.096 mas, bpa=-32.41 degrees ! Estimated noise=12.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0101536 Jy ! Component: 100 - total flux cleaned = -0.0122056 Jy ! Component: 150 - total flux cleaned = -0.0120046 Jy ! Component: 200 - total flux cleaned = -0.011901 Jy ! Total flux subtracted in 200 components = -0.011901 Jy ! Clean residual min=-0.001854 max=0.002050 Jy/beam ! Clean residual mean=-0.000009 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0604906 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.0604906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046997Jy sigma=0.050997 ! Fit after self-cal, rms=0.047014Jy sigma=0.050988 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116399 Jy ! Component: 100 - total flux cleaned = 0.000158157 Jy ! Component: 150 - total flux cleaned = 0.00015744 Jy ! Component: 200 - total flux cleaned = 0.000205537 Jy ! Total flux subtracted in 200 components = 0.000205537 Jy ! Clean residual min=-0.001814 max=0.001991 Jy/beam ! Clean residual mean=-0.000009 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0606961 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.0606961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046945Jy sigma=0.051032 ! Fit after self-cal, rms=0.046941Jy sigma=0.051026 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046941Jy sigma=0.051026 ! Fit after self-cal, rms=0.042662Jy sigma=0.048709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.67 mas, bmaj=7.137 mas, bpa=-32.44 degrees ! Estimated noise=10.4947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00796911 Jy ! Component: 100 - total flux cleaned = -0.00971358 Jy ! Component: 150 - total flux cleaned = -0.0100672 Jy ! Component: 200 - total flux cleaned = -0.0100519 Jy ! Total flux subtracted in 200 components = -0.0100519 Jy ! Clean residual min=-0.001468 max=0.001510 Jy/beam ! Clean residual mean=-0.000006 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0506442 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.0506442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038175Jy sigma=0.050955 ! Fit after self-cal, rms=0.038185Jy sigma=0.050946 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.03222e-05 Jy ! Component: 100 - total flux cleaned = 1.53316e-05 Jy ! Component: 150 - total flux cleaned = 5.04946e-05 Jy ! Component: 200 - total flux cleaned = 8.14228e-05 Jy ! Total flux subtracted in 200 components = 8.14228e-05 Jy ! Clean residual min=-0.001451 max=0.001479 Jy/beam ! Clean residual mean=-0.000006 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0507256 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.0507256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038151Jy sigma=0.050971 ! Fit after self-cal, rms=0.038150Jy sigma=0.050967 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038150Jy sigma=0.050967 ! Fit after self-cal, rms=0.034679Jy sigma=0.048647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=6.759 mas, bpa=-29.81 degrees ! Estimated noise=9.2371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00647572 Jy ! Component: 100 - total flux cleaned = -0.00790394 Jy ! Component: 150 - total flux cleaned = -0.00836019 Jy ! Component: 200 - total flux cleaned = -0.00845623 Jy ! Total flux subtracted in 200 components = -0.00845623 Jy ! Clean residual min=-0.001203 max=0.001111 Jy/beam ! Clean residual mean=-0.000005 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0422694 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 123 components and 0.0422694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031044Jy sigma=0.050895 ! Fit after self-cal, rms=0.031048Jy sigma=0.050883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131496 Jy ! Component: 100 - total flux cleaned = -0.000114592 Jy ! Component: 150 - total flux cleaned = -0.000100492 Jy ! Component: 200 - total flux cleaned = -8.27265e-05 Jy ! Total flux subtracted in 200 components = -8.27265e-05 Jy ! Clean residual min=-0.001199 max=0.001073 Jy/beam ! Clean residual mean=-0.000006 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0421866 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 0.0421866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031028Jy sigma=0.050895 ! Fit after self-cal, rms=0.031032Jy sigma=0.050892 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.66 mas, bmaj=7.179 mas, bpa=-32.46 degrees ! Estimated noise=8.5097 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.66 x 7.179 at -32.46 degrees (North through East) ! Clean map min=-0.0011918 max=0.033087 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.234 mas, bmaj=7.713 mas, bpa=-33.65 degrees ! Estimated noise=19.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264693 Jy ! Component: 100 - total flux cleaned = 0.0330401 Jy ! Component: 150 - total flux cleaned = 0.036042 Jy ! Component: 200 - total flux cleaned = 0.038275 Jy ! Total flux subtracted in 200 components = 0.038275 Jy ! Clean residual min=-0.003631 max=0.003455 Jy/beam ! Clean residual mean=-0.000005 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.038275 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.038275 Jy ! Inverting map and beam ! Estimated beam: bmin=1.66 mas, bmaj=7.179 mas, bpa=-32.46 degrees ! Estimated noise=8.5097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193331 Jy ! Component: 100 - total flux cleaned = 0.00303814 Jy ! Component: 150 - total flux cleaned = 0.00338997 Jy ! Component: 200 - total flux cleaned = 0.00367669 Jy ! Total flux subtracted in 200 components = 0.00367669 Jy ! Clean residual min=-0.001672 max=0.001674 Jy/beam ! Clean residual mean=-0.000005 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0419517 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 0.0419517 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=6.759 mas, bpa=-29.81 degrees ! Estimated noise=9.2371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.98707e-05 Jy ! Component: 100 - total flux cleaned = -7.19029e-05 Jy ! Component: 150 - total flux cleaned = -7.15228e-05 Jy ! Component: 200 - total flux cleaned = -7.12162e-05 Jy ! Total flux subtracted in 200 components = -7.12162e-05 Jy ! Clean residual min=-0.001499 max=0.001244 Jy/beam ! Clean residual mean=-0.000007 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0418805 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5773e-05 Jy ! Component: 100 - total flux cleaned = 1.56158e-05 Jy ! Component: 150 - total flux cleaned = 2.96379e-05 Jy ! Component: 200 - total flux cleaned = 4.18602e-05 Jy ! Total flux subtracted in 200 components = 4.18602e-05 Jy ! Clean residual min=-0.001388 max=0.001205 Jy/beam ! Clean residual mean=-0.000007 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0419223 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 90 components and 0.0419223 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.66 mas, bmaj=7.179 mas, bpa=-32.46 degrees ! Estimated noise=8.5097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.62554e-05 Jy ! Component: 100 - total flux cleaned = -3.61204e-05 Jy ! Component: 150 - total flux cleaned = -2.23785e-05 Jy ! Component: 200 - total flux cleaned = -3.42579e-05 Jy ! Total flux subtracted in 200 components = -3.42579e-05 Jy ! Clean residual min=-0.001260 max=0.001168 Jy/beam ! Clean residual mean=-0.000005 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.041888 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.0418881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030945Jy sigma=0.051081 ! Fit after self-cal, rms=0.030945Jy sigma=0.051071 wmodel /g0/scr/pima/npcsa_uvs/J0402+8241_X_map.mod ! Writing 100 model components to file: /g0/scr/pima/npcsa_uvs/J0402+8241_X_map.mod wobs /g0/scr/pima/npcsa_uvs/J0402+8241_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0402+8241_X_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J0402+8241_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0402+8241_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271821 Jy ! Component: 100 - total flux cleaned = -0.000175857 Jy ! Component: 150 - total flux cleaned = -0.000158326 Jy ! Component: 200 - total flux cleaned = -0.000157422 Jy ! Component: 250 - total flux cleaned = -0.000157085 Jy ! Component: 300 - total flux cleaned = -0.000171732 Jy ! Component: 350 - total flux cleaned = -0.000212459 Jy ! Component: 400 - total flux cleaned = -0.000263865 Jy ! Component: 450 - total flux cleaned = -0.00031349 Jy ! Component: 500 - total flux cleaned = -0.000407716 Jy ! Component: 550 - total flux cleaned = -0.000463969 Jy ! Component: 600 - total flux cleaned = -0.000539904 Jy ! Component: 650 - total flux cleaned = -0.000571168 Jy ! Component: 700 - total flux cleaned = -0.000581354 Jy ! Component: 750 - total flux cleaned = -0.000601181 Jy ! Component: 800 - total flux cleaned = -0.000610935 Jy ! Component: 850 - total flux cleaned = -0.000601704 Jy ! Component: 900 - total flux cleaned = -0.000620078 Jy ! Component: 950 - total flux cleaned = -0.000593194 Jy ! Component: 1000 - total flux cleaned = -0.000540329 Jy ! Component: 1050 - total flux cleaned = -0.000488378 Jy ! Component: 1100 - total flux cleaned = -0.000462781 Jy ! Component: 1150 - total flux cleaned = -0.000454335 Jy ! Component: 1200 - total flux cleaned = -0.000437565 Jy ! Component: 1250 - total flux cleaned = -0.000404623 Jy ! Component: 1300 - total flux cleaned = -0.000412857 Jy ! Component: 1350 - total flux cleaned = -0.00043712 Jy ! Component: 1400 - total flux cleaned = -0.000428917 Jy ! Component: 1450 - total flux cleaned = -0.00042889 Jy ! Component: 1500 - total flux cleaned = -0.000444824 Jy ! Component: 1550 - total flux cleaned = -0.000436936 Jy ! Component: 1600 - total flux cleaned = -0.000444791 Jy ! Component: 1650 - total flux cleaned = -0.000460419 Jy ! Component: 1700 - total flux cleaned = -0.000452664 Jy ! Component: 1750 - total flux cleaned = -0.000468125 Jy ! Component: 1800 - total flux cleaned = -0.000460423 Jy ! Component: 1850 - total flux cleaned = -0.000475773 Jy ! Component: 1900 - total flux cleaned = -0.000475782 Jy ! Component: 1950 - total flux cleaned = -0.000498556 Jy ! Component: 2000 - total flux cleaned = -0.000513718 Jy ! Component: 2050 - total flux cleaned = -0.000513735 Jy ! Component: 2100 - total flux cleaned = -0.000528785 Jy ! Component: 2150 - total flux cleaned = -0.000543806 Jy ! Component: 2200 - total flux cleaned = -0.000551328 Jy ! Component: 2250 - total flux cleaned = -0.000573753 Jy ! Component: 2300 - total flux cleaned = -0.000603588 Jy ! Component: 2350 - total flux cleaned = -0.000618512 Jy ! Component: 2400 - total flux cleaned = -0.000640784 Jy ! Component: 2450 - total flux cleaned = -0.000648203 Jy ! Component: 2500 - total flux cleaned = -0.000662996 Jy ! Component: 2550 - total flux cleaned = -0.000670415 Jy ! Component: 2600 - total flux cleaned = -0.000677841 Jy ! Component: 2650 - total flux cleaned = -0.000692745 Jy ! Component: 2700 - total flux cleaned = -0.000722442 Jy ! Component: 2750 - total flux cleaned = -0.000752139 Jy ! Component: 2800 - total flux cleaned = -0.000789394 Jy ! Component: 2850 - total flux cleaned = -0.000826736 Jy ! Component: 2900 - total flux cleaned = -0.000871641 Jy ! Component: 2950 - total flux cleaned = -0.000886641 Jy ! Component: 3000 - total flux cleaned = -0.000924175 Jy ! Component: 3050 - total flux cleaned = -0.000969399 Jy ! Component: 3100 - total flux cleaned = -0.000999582 Jy ! Component: 3150 - total flux cleaned = -0.0010299 Jy ! Component: 3200 - total flux cleaned = -0.00106034 Jy ! Component: 3250 - total flux cleaned = -0.00109075 Jy ! Component: 3300 - total flux cleaned = -0.00112132 Jy ! Component: 3350 - total flux cleaned = -0.00115966 Jy ! Component: 3400 - total flux cleaned = -0.00120572 Jy ! Component: 3450 - total flux cleaned = -0.00123654 Jy ! Component: 3500 - total flux cleaned = -0.00126743 Jy ! Component: 3550 - total flux cleaned = -0.00131396 Jy ! Component: 3600 - total flux cleaned = -0.00136067 Jy ! Component: 3650 - total flux cleaned = -0.00139966 Jy ! Component: 3700 - total flux cleaned = -0.00144674 Jy ! Component: 3750 - total flux cleaned = -0.00147043 Jy ! Component: 3800 - total flux cleaned = -0.0015337 Jy ! Component: 3850 - total flux cleaned = -0.00156545 Jy ! Component: 3900 - total flux cleaned = -0.0016054 Jy ! Component: 3950 - total flux cleaned = -0.00164549 Jy ! Component: 4000 - total flux cleaned = -0.00167767 Jy ! Component: 4050 - total flux cleaned = -0.00172619 Jy ! Total flux subtracted in 4096 components = -0.00176684 Jy ! Clean residual min=-0.000491 max=0.000473 Jy/beam ! Clean residual mean=-0.000002 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.0401212 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 298 components and 0.0401212 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J0402+8241_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.66 x 7.179 at -32.46 degrees (North through East) ! Clean map min=-0.00099967 max=0.031506 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0402+8241_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0315058 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127494 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21401 1.21401 2.42801 4.85602 9.71205 19.4241 38.8482 77.6964 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.031 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J0402+8241_X_uvs.log closed on Sun Oct 6 10:26:25 2013