! Started logfile: /g0/scr/pima/npcsa_uvs/J0402+8241_S_uvs.log on Sun Oct  6 10:30:59 2013
obs /g0/scr/pima/npcsa_uvs/J0402+8241_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0402+8241_S_uva.fits
! AN table 1: 54 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.678571 visibilities/baseline/integration-bin.
! Found source: J0402+8241
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4104 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0402+8241_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.029540Jy  sigma=0.934785
! Fit after  self-cal, rms=0.914360Jy  sigma=0.747188
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.954 mas, bmaj=13.14 mas, bpa=-30.48 degrees
! Estimated noise=25.1203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103049 Jy
! Component: 100  -  total flux cleaned = 0.138806 Jy
! Total flux subtracted in 100 components = 0.138806 Jy
! Clean residual min=-0.017999 max=0.025184 Jy/beam
! Clean residual mean=0.000023 rms=0.007447 Jy/beam
! Combined flux in latest and established models = 0.138806 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.138806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132562Jy  sigma=0.133513
! Fit after  self-cal, rms=0.131125Jy  sigma=0.132463
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.473 mas, bmaj=13.45 mas, bpa=-28.16 degrees
! Estimated noise=14.1147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124757 Jy
! Component: 100  -  total flux cleaned = 0.0145861 Jy
! Component: 150  -  total flux cleaned = 0.016307 Jy
! Component: 200  -  total flux cleaned = 0.0177741 Jy
! Total flux subtracted in 200 components = 0.0177741 Jy
! Clean residual min=-0.016703 max=0.024347 Jy/beam
! Clean residual mean=0.000079 rms=0.006105 Jy/beam
! Combined flux in latest and established models = 0.15658 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.15658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129350Jy  sigma=0.124262
! Fit after  self-cal, rms=0.128531Jy  sigma=0.123912
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.47     FD        1.05     HN        0.74     KP        0.90     
!   LA        0.99     NL        0.91     OV        1.17     PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        0.70     KP        0.85     
!   LA        0.89     NL        0.84     OV        0.99     PT        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.40     FD        1.06     HN        0.76     KP        0.84     
!   LA        0.77     NL        0.96     OV        1.08     PT        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.11     HN        0.66     KP        0.84     
!   LA        0.56     NL        0.90     OV        0.82     PT        0.95     
! 
! 
! Fit before self-cal, rms=0.128531Jy  sigma=0.123912
! Fit after  self-cal, rms=0.100146Jy  sigma=0.097573
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.361 mas, bmaj=12.69 mas, bpa=-28.67 degrees
! Estimated noise=11.1373 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0184048 Jy
! Component: 100  -  total flux cleaned = -0.0187238 Jy
! Component: 150  -  total flux cleaned = -0.01843 Jy
! Component: 200  -  total flux cleaned = -0.0184255 Jy
! Total flux subtracted in 200 components = -0.0184255 Jy
! Clean residual min=-0.006059 max=0.006898 Jy/beam
! Clean residual mean=0.000026 rms=0.001637 Jy/beam
! Combined flux in latest and established models = 0.138154 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 0.138154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090534Jy  sigma=0.101196
! Fit after  self-cal, rms=0.091170Jy  sigma=0.100297
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091170Jy  sigma=0.100297
! Fit after  self-cal, rms=0.083337Jy  sigma=0.096217
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.162 mas, bmaj=12.76 mas, bpa=-28.79 degrees
! Estimated noise=9.12958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0148363 Jy
! Component: 100  -  total flux cleaned = -0.016938 Jy
! Component: 150  -  total flux cleaned = -0.0169523 Jy
! Component: 200  -  total flux cleaned = -0.017042 Jy
! Total flux subtracted in 200 components = -0.017042 Jy
! Clean residual min=-0.004692 max=0.005289 Jy/beam
! Clean residual mean=0.000020 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.121112 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.121112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075803Jy  sigma=0.099795
! Fit after  self-cal, rms=0.075876Jy  sigma=0.099773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.48871e-05 Jy
! Component: 100  -  total flux cleaned = -0.000146748 Jy
! Component: 150  -  total flux cleaned = -0.000290354 Jy
! Component: 200  -  total flux cleaned = -0.000376412 Jy
! Total flux subtracted in 200 components = -0.000376412 Jy
! Clean residual min=-0.004605 max=0.004602 Jy/beam
! Clean residual mean=0.000020 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 0.120736 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 79 components and 0.120736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075502Jy  sigma=0.100218
! Fit after  self-cal, rms=0.075501Jy  sigma=0.100213
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075501Jy  sigma=0.100213
! Fit after  self-cal, rms=0.068866Jy  sigma=0.096056
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.01 mas, bmaj=12.85 mas, bpa=-28.89 degrees
! Estimated noise=7.45025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0117083 Jy
! Component: 100  -  total flux cleaned = -0.0148896 Jy
! Component: 150  -  total flux cleaned = -0.0150751 Jy
! Component: 200  -  total flux cleaned = -0.0151513 Jy
! Total flux subtracted in 200 components = -0.0151513 Jy
! Clean residual min=-0.003662 max=0.004003 Jy/beam
! Clean residual mean=0.000016 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.105585 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.105585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062979Jy  sigma=0.099541
! Fit after  self-cal, rms=0.062978Jy  sigma=0.099532
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112753 Jy
! Component: 100  -  total flux cleaned = -0.000198045 Jy
! Component: 150  -  total flux cleaned = -0.000310615 Jy
! Component: 200  -  total flux cleaned = -0.000343634 Jy
! Total flux subtracted in 200 components = -0.000343634 Jy
! Clean residual min=-0.003776 max=0.003515 Jy/beam
! Clean residual mean=0.000016 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.105241 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 86 components and 0.105241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062640Jy  sigma=0.100038
! Fit after  self-cal, rms=0.062639Jy  sigma=0.100036
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062639Jy  sigma=0.100036
! Fit after  self-cal, rms=0.057349Jy  sigma=0.095972
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.208 mas, bmaj=13.4 mas, bpa=-20.75 degrees
! Estimated noise=6.46184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00975413 Jy
! Component: 100  -  total flux cleaned = -0.0128807 Jy
! Component: 150  -  total flux cleaned = -0.0131791 Jy
! Component: 200  -  total flux cleaned = -0.0133494 Jy
! Total flux subtracted in 200 components = -0.0133494 Jy
! Clean residual min=-0.003547 max=0.003239 Jy/beam
! Clean residual mean=0.000018 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.0918917 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 96 components and 0.0918917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052552Jy  sigma=0.099422
! Fit after  self-cal, rms=0.052534Jy  sigma=0.099411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000189033 Jy
! Component: 100  -  total flux cleaned = -0.000223192 Jy
! Component: 150  -  total flux cleaned = -0.000251508 Jy
! Component: 200  -  total flux cleaned = -0.000277829 Jy
! Total flux subtracted in 200 components = -0.000277829 Jy
! Clean residual min=-0.003340 max=0.002884 Jy/beam
! Clean residual mean=0.000018 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.0916139 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 112 components and 0.0916139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052242Jy  sigma=0.099950
! Fit after  self-cal, rms=0.052241Jy  sigma=0.099948
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.892 mas, bmaj=12.95 mas, bpa=-28.98 degrees
! Estimated noise=6.09416 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.892 x 12.95 at -28.98 degrees (North through East)
! Clean map  min=-0.0055361  max=0.05197 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.627 mas, bmaj=13.16 mas, bpa=-30.72 degrees
! Estimated noise=10.3283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.043594 Jy
! Component: 100  -  total flux cleaned = 0.0620285 Jy
! Component: 150  -  total flux cleaned = 0.0730744 Jy
! Component: 200  -  total flux cleaned = 0.0766777 Jy
! Total flux subtracted in 200 components = 0.0766777 Jy
! Clean residual min=-0.006299 max=0.007988 Jy/beam
! Clean residual mean=0.000015 rms=0.001874 Jy/beam
! Combined flux in latest and established models = 0.0766777 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.0766777 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.892 mas, bmaj=12.95 mas, bpa=-28.98 degrees
! Estimated noise=6.09416 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00893356 Jy
! Component: 100  -  total flux cleaned = 0.0120016 Jy
! Component: 150  -  total flux cleaned = 0.013341 Jy
! Component: 200  -  total flux cleaned = 0.0140908 Jy
! Total flux subtracted in 200 components = 0.0140908 Jy
! Clean residual min=-0.002896 max=0.003190 Jy/beam
! Clean residual mean=0.000008 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.0907685 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 68 components and 0.0907685 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.208 mas, bmaj=13.4 mas, bpa=-20.75 degrees
! Estimated noise=6.46184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168588 Jy
! Component: 100  -  total flux cleaned = 0.00224892 Jy
! Component: 150  -  total flux cleaned = 0.00260348 Jy
! Component: 200  -  total flux cleaned = 0.00304193 Jy
! Total flux subtracted in 200 components = 0.00304193 Jy
! Clean residual min=-0.002594 max=0.002704 Jy/beam
! Clean residual mean=0.000007 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.0938105 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332788 Jy
! Component: 100  -  total flux cleaned = 0.000632031 Jy
! Component: 150  -  total flux cleaned = 0.000859812 Jy
! Component: 200  -  total flux cleaned = 0.00111092 Jy
! Total flux subtracted in 200 components = 0.00111092 Jy
! Clean residual min=-0.002374 max=0.002244 Jy/beam
! Clean residual mean=0.000006 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.0949214 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 107 components and 0.0949214 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.892 mas, bmaj=12.95 mas, bpa=-28.98 degrees
! Estimated noise=6.09416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000376815 Jy
! Component: 100  -  total flux cleaned = -0.000307579 Jy
! Component: 150  -  total flux cleaned = -0.000215478 Jy
! Component: 200  -  total flux cleaned = -7.19602e-05 Jy
! Total flux subtracted in 200 components = -7.19602e-05 Jy
! Clean residual min=-0.002060 max=0.001907 Jy/beam
! Clean residual mean=0.000004 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.0948494 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.0948494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051732Jy  sigma=0.099998
! Fit after  self-cal, rms=0.051619Jy  sigma=0.099756
wmodel /g0/scr/pima/npcsa_uvs/J0402+8241_S_map.mod
! Writing 123 model components to file: /g0/scr/pima/npcsa_uvs/J0402+8241_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0402+8241_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0402+8241_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0402+8241_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J0402+8241_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000485017 Jy
! Component: 100  -  total flux cleaned = -0.000703181 Jy
! Component: 150  -  total flux cleaned = -0.000829662 Jy
! Component: 200  -  total flux cleaned = -0.00100036 Jy
! Component: 250  -  total flux cleaned = -0.00105157 Jy
! Component: 300  -  total flux cleaned = -0.00100474 Jy
! Component: 350  -  total flux cleaned = -0.000890161 Jy
! Component: 400  -  total flux cleaned = -0.000825559 Jy
! Component: 450  -  total flux cleaned = -0.000825403 Jy
! Component: 500  -  total flux cleaned = -0.000883088 Jy
! Component: 550  -  total flux cleaned = -0.00095754 Jy
! Component: 600  -  total flux cleaned = -0.00104687 Jy
! Component: 650  -  total flux cleaned = -0.00113287 Jy
! Component: 700  -  total flux cleaned = -0.00118218 Jy
! Component: 750  -  total flux cleaned = -0.0012614 Jy
! Component: 800  -  total flux cleaned = -0.00130692 Jy
! Component: 850  -  total flux cleaned = -0.00132229 Jy
! Component: 900  -  total flux cleaned = -0.00132275 Jy
! Component: 950  -  total flux cleaned = -0.00130864 Jy
! Component: 1000  -  total flux cleaned = -0.00128156 Jy
! Component: 1050  -  total flux cleaned = -0.00129497 Jy
! Component: 1100  -  total flux cleaned = -0.00128218 Jy
! Component: 1150  -  total flux cleaned = -0.00125723 Jy
! Component: 1200  -  total flux cleaned = -0.00120802 Jy
! Component: 1250  -  total flux cleaned = -0.00118385 Jy
! Component: 1300  -  total flux cleaned = -0.00115998 Jy
! Component: 1350  -  total flux cleaned = -0.00111336 Jy
! Component: 1400  -  total flux cleaned = -0.00110176 Jy
! Component: 1450  -  total flux cleaned = -0.00111287 Jy
! Component: 1500  -  total flux cleaned = -0.00115732 Jy
! Component: 1550  -  total flux cleaned = -0.00115726 Jy
! Component: 1600  -  total flux cleaned = -0.00120079 Jy
! Component: 1650  -  total flux cleaned = -0.00121141 Jy
! Component: 1700  -  total flux cleaned = -0.0012433 Jy
! Component: 1750  -  total flux cleaned = -0.00130662 Jy
! Component: 1800  -  total flux cleaned = -0.00134853 Jy
! Component: 1850  -  total flux cleaned = -0.00135891 Jy
! Component: 1900  -  total flux cleaned = -0.00138993 Jy
! Component: 1950  -  total flux cleaned = -0.00140023 Jy
! Component: 2000  -  total flux cleaned = -0.00144113 Jy
! Component: 2050  -  total flux cleaned = -0.0014615 Jy
! Component: 2100  -  total flux cleaned = -0.00149192 Jy
! Component: 2150  -  total flux cleaned = -0.00153212 Jy
! Component: 2200  -  total flux cleaned = -0.00155213 Jy
! Component: 2250  -  total flux cleaned = -0.00159211 Jy
! Component: 2300  -  total flux cleaned = -0.00163196 Jy
! Component: 2350  -  total flux cleaned = -0.00166182 Jy
! Component: 2400  -  total flux cleaned = -0.00169157 Jy
! Component: 2450  -  total flux cleaned = -0.00171143 Jy
! Component: 2500  -  total flux cleaned = -0.00179065 Jy
! Component: 2550  -  total flux cleaned = -0.00185 Jy
! Component: 2600  -  total flux cleaned = -0.00191923 Jy
! Component: 2650  -  total flux cleaned = -0.00197853 Jy
! Component: 2700  -  total flux cleaned = -0.002028 Jy
! Component: 2750  -  total flux cleaned = -0.00208739 Jy
! Component: 2800  -  total flux cleaned = -0.00214679 Jy
! Component: 2850  -  total flux cleaned = -0.00222599 Jy
! Component: 2900  -  total flux cleaned = -0.00228543 Jy
! Component: 2950  -  total flux cleaned = -0.00235478 Jy
! Component: 3000  -  total flux cleaned = -0.00240436 Jy
! Component: 3050  -  total flux cleaned = -0.00248383 Jy
! Component: 3100  -  total flux cleaned = -0.00254353 Jy
! Component: 3150  -  total flux cleaned = -0.00259342 Jy
! Component: 3200  -  total flux cleaned = -0.00264351 Jy
! Component: 3250  -  total flux cleaned = -0.00270373 Jy
! Component: 3300  -  total flux cleaned = -0.00274397 Jy
! Component: 3350  -  total flux cleaned = -0.00279447 Jy
! Component: 3400  -  total flux cleaned = -0.00284512 Jy
! Component: 3450  -  total flux cleaned = -0.00290611 Jy
! Component: 3500  -  total flux cleaned = -0.00296729 Jy
! Component: 3550  -  total flux cleaned = -0.002998 Jy
! Component: 3600  -  total flux cleaned = -0.00305954 Jy
! Component: 3650  -  total flux cleaned = -0.00310062 Jy
! Component: 3700  -  total flux cleaned = -0.00316264 Jy
! Component: 3750  -  total flux cleaned = -0.0032144 Jy
! Component: 3800  -  total flux cleaned = -0.0032976 Jy
! Component: 3850  -  total flux cleaned = -0.00334986 Jy
! Component: 3900  -  total flux cleaned = -0.00339183 Jy
! Component: 3950  -  total flux cleaned = -0.00345492 Jy
! Component: 4000  -  total flux cleaned = -0.00351827 Jy
! Component: 4050  -  total flux cleaned = -0.00351823 Jy
! Total flux subtracted in 4096 components = -0.00356081 Jy
! Clean residual min=-0.000611 max=0.000620 Jy/beam
! Clean residual mean=0.000007 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0912886 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 412 components and 0.0912886 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0402+8241_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.892 x 12.95 at -28.98 degrees (North through East)
! Clean map  min=-0.001949  max=0.050337 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0402+8241_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0503366 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000201549 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.20121 1.20121 2.40241 4.80483 9.60965 19.2193 38.4386 76.8772
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.05 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0402+8241_S_uvs.log closed on Sun Oct  6 10:31:03 2013