! Started logfile: /g0/scr/pima/npcsa_uvs/J0230+8141_S_uvs.log on Sun Oct  6 10:30:38 2013
obs /g0/scr/pima/npcsa_uvs/J0230+8141_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0230+8141_S_uva.fits
! AN table 1: 55 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.877273 visibilities/baseline/integration-bin.
! Found source: J0230+8141
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5404 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0230+8141_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000564Jy  sigma=0.808958
! Fit after  self-cal, rms=0.940464Jy  sigma=0.712502
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.504 mas, bmaj=10.63 mas, bpa=-25.02 degrees
! Estimated noise=24.0919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0737064 Jy
! Component: 100  -  total flux cleaned = 0.0926757 Jy
! Total flux subtracted in 100 components = 0.0926757 Jy
! Clean residual min=-0.011504 max=0.010063 Jy/beam
! Clean residual mean=0.000021 rms=0.003332 Jy/beam
! Combined flux in latest and established models = 0.0926757 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0926757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099899Jy  sigma=0.090494
! Fit after  self-cal, rms=0.098154Jy  sigma=0.089422
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.633 mas, bmaj=11.67 mas, bpa=-22.96 degrees
! Estimated noise=13.5363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113962 Jy
! Component: 100  -  total flux cleaned = 0.0180283 Jy
! Component: 150  -  total flux cleaned = 0.02243 Jy
! Component: 200  -  total flux cleaned = 0.0255241 Jy
! Total flux subtracted in 200 components = 0.0255241 Jy
! Clean residual min=-0.011739 max=0.010501 Jy/beam
! Clean residual mean=0.000125 rms=0.003914 Jy/beam
! Combined flux in latest and established models = 0.1182 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 48 components and 0.1182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099926Jy  sigma=0.086114
! Fit after  self-cal, rms=0.099509Jy  sigma=0.085939
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.74     FD        0.99     HN        0.84     KP        0.96     
!   LA        0.97     NL        0.81     OV        0.98     PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.04     HN        0.97     KP        1.02     
!   LA        0.91     NL        0.84     OV        0.94     PT        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.11     HN        1.06     KP        1.10     
!   LA        0.62     NL        0.98     OV        1.10     PT        0.85     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.98     HN        0.80     KP        0.98     
!   LA        0.53     NL        0.97     OV        0.78     PT        0.86     
! 
! 
! Fit before self-cal, rms=0.099509Jy  sigma=0.085939
! Fit after  self-cal, rms=0.086478Jy  sigma=0.077787
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.621 mas, bmaj=11.72 mas, bpa=-22.65 degrees
! Estimated noise=10.6138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0152841 Jy
! Component: 100  -  total flux cleaned = -0.0192355 Jy
! Component: 150  -  total flux cleaned = -0.0206534 Jy
! Component: 200  -  total flux cleaned = -0.0207371 Jy
! Total flux subtracted in 200 components = -0.0207371 Jy
! Clean residual min=-0.004972 max=0.006306 Jy/beam
! Clean residual mean=0.000054 rms=0.001841 Jy/beam
! Combined flux in latest and established models = 0.0974627 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 69 components and 0.0974627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078731Jy  sigma=0.080473
! Fit after  self-cal, rms=0.079218Jy  sigma=0.080001
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079218Jy  sigma=0.080001
! Fit after  self-cal, rms=0.070397Jy  sigma=0.077109
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.618 mas, bmaj=11.68 mas, bpa=-22.34 degrees
! Estimated noise=8.5392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0121756 Jy
! Component: 100  -  total flux cleaned = -0.0153264 Jy
! Component: 150  -  total flux cleaned = -0.0166186 Jy
! Component: 200  -  total flux cleaned = -0.016819 Jy
! Total flux subtracted in 200 components = -0.016819 Jy
! Clean residual min=-0.003711 max=0.004961 Jy/beam
! Clean residual mean=0.000041 rms=0.001395 Jy/beam
! Combined flux in latest and established models = 0.0806437 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 79 components and 0.0806437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064302Jy  sigma=0.079797
! Fit after  self-cal, rms=0.064358Jy  sigma=0.079788
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.71872e-06 Jy
! Component: 100  -  total flux cleaned = -7.80668e-05 Jy
! Component: 150  -  total flux cleaned = -0.0001201 Jy
! Component: 200  -  total flux cleaned = -0.000193062 Jy
! Total flux subtracted in 200 components = -0.000193062 Jy
! Clean residual min=-0.003667 max=0.004916 Jy/beam
! Clean residual mean=0.000042 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 0.0804506 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.0804506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064242Jy  sigma=0.079892
! Fit after  self-cal, rms=0.064243Jy  sigma=0.079890
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064243Jy  sigma=0.079890
! Fit after  self-cal, rms=0.056374Jy  sigma=0.077062
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.582 mas, bmaj=11.64 mas, bpa=-22.26 degrees
! Estimated noise=6.82694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00971208 Jy
! Component: 100  -  total flux cleaned = -0.0122638 Jy
! Component: 150  -  total flux cleaned = -0.0133746 Jy
! Component: 200  -  total flux cleaned = -0.0139611 Jy
! Total flux subtracted in 200 components = -0.0139611 Jy
! Clean residual min=-0.002934 max=0.003930 Jy/beam
! Clean residual mean=0.000033 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.0664895 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.0664895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051496Jy  sigma=0.079768
! Fit after  self-cal, rms=0.051492Jy  sigma=0.079766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.33863e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118639 Jy
! Component: 150  -  total flux cleaned = -0.000162116 Jy
! Component: 200  -  total flux cleaned = -0.000214747 Jy
! Total flux subtracted in 200 components = -0.000214747 Jy
! Clean residual min=-0.002943 max=0.003911 Jy/beam
! Clean residual mean=0.000033 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.0662748 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.0662748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051417Jy  sigma=0.079857
! Fit after  self-cal, rms=0.051418Jy  sigma=0.079856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051418Jy  sigma=0.079856
! Fit after  self-cal, rms=0.045100Jy  sigma=0.077027
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.69 mas, bmaj=12.64 mas, bpa=-11.57 degrees
! Estimated noise=5.77712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0078644 Jy
! Component: 100  -  total flux cleaned = -0.00987693 Jy
! Component: 150  -  total flux cleaned = -0.0106711 Jy
! Component: 200  -  total flux cleaned = -0.0110837 Jy
! Total flux subtracted in 200 components = -0.0110837 Jy
! Clean residual min=-0.002899 max=0.003515 Jy/beam
! Clean residual mean=0.000035 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.0551911 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 112 components and 0.0551911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041169Jy  sigma=0.079781
! Fit after  self-cal, rms=0.041158Jy  sigma=0.079776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131373 Jy
! Component: 100  -  total flux cleaned = -0.000157594 Jy
! Component: 150  -  total flux cleaned = -0.000157226 Jy
! Component: 200  -  total flux cleaned = -0.000164602 Jy
! Total flux subtracted in 200 components = -0.000164602 Jy
! Clean residual min=-0.002899 max=0.003531 Jy/beam
! Clean residual mean=0.000036 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.0550265 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 120 components and 0.0550265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041120Jy  sigma=0.079838
! Fit after  self-cal, rms=0.041122Jy  sigma=0.079837
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.546 mas, bmaj=11.6 mas, bpa=-22.21 degrees
! Estimated noise=5.45581 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.546 x 11.6 at -22.21 degrees (North through East)
! Clean map  min=-0.0023389  max=0.036547 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.54 mas, bmaj=10.54 mas, bpa=-23.47 degrees
! Estimated noise=9.4224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0293063 Jy
! Component: 100  -  total flux cleaned = 0.0375799 Jy
! Component: 150  -  total flux cleaned = 0.0418917 Jy
! Component: 200  -  total flux cleaned = 0.0445749 Jy
! Total flux subtracted in 200 components = 0.0445749 Jy
! Clean residual min=-0.002887 max=0.003351 Jy/beam
! Clean residual mean=0.000012 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.0445749 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.0445749 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.546 mas, bmaj=11.6 mas, bpa=-22.21 degrees
! Estimated noise=5.45581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281022 Jy
! Component: 100  -  total flux cleaned = 0.0045793 Jy
! Component: 150  -  total flux cleaned = 0.00582775 Jy
! Component: 200  -  total flux cleaned = 0.00671692 Jy
! Total flux subtracted in 200 components = 0.00671692 Jy
! Clean residual min=-0.002568 max=0.003319 Jy/beam
! Clean residual mean=0.000034 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.0512918 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 59 components and 0.0512918 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.69 mas, bmaj=12.64 mas, bpa=-11.57 degrees
! Estimated noise=5.77712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116123 Jy
! Component: 100  -  total flux cleaned = 0.00179317 Jy
! Component: 150  -  total flux cleaned = 0.00194702 Jy
! Component: 200  -  total flux cleaned = 0.00208579 Jy
! Total flux subtracted in 200 components = 0.00208579 Jy
! Clean residual min=-0.002984 max=0.003784 Jy/beam
! Clean residual mean=0.000042 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.0533776 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.36712e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125053 Jy
! Component: 150  -  total flux cleaned = 0.000193177 Jy
! Component: 200  -  total flux cleaned = 0.000240734 Jy
! Total flux subtracted in 200 components = 0.000240734 Jy
! Clean residual min=-0.002973 max=0.003761 Jy/beam
! Clean residual mean=0.000041 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.0536184 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 70 components and 0.0536184 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.546 mas, bmaj=11.6 mas, bpa=-22.21 degrees
! Estimated noise=5.45581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000223616 Jy
! Component: 100  -  total flux cleaned = -0.000205154 Jy
! Component: 150  -  total flux cleaned = -0.000235888 Jy
! Component: 200  -  total flux cleaned = -0.000261016 Jy
! Total flux subtracted in 200 components = -0.000261016 Jy
! Clean residual min=-0.002450 max=0.003264 Jy/beam
! Clean residual mean=0.000029 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0533574 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 87 components and 0.0533574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041126Jy  sigma=0.080085
! Fit after  self-cal, rms=0.041127Jy  sigma=0.080070
wmodel /g0/scr/pima/npcsa_uvs/J0230+8141_S_map.mod
! Writing 87 model components to file: /g0/scr/pima/npcsa_uvs/J0230+8141_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0230+8141_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0230+8141_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0230+8141_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0230+8141_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135707 Jy
! Component: 100  -  total flux cleaned = 0.0020396 Jy
! Component: 150  -  total flux cleaned = 0.00236028 Jy
! Component: 200  -  total flux cleaned = 0.0025427 Jy
! Component: 250  -  total flux cleaned = 0.00271087 Jy
! Component: 300  -  total flux cleaned = 0.00283575 Jy
! Component: 350  -  total flux cleaned = 0.00289551 Jy
! Component: 400  -  total flux cleaned = 0.00303391 Jy
! Component: 450  -  total flux cleaned = 0.00308498 Jy
! Component: 500  -  total flux cleaned = 0.00308494 Jy
! Component: 550  -  total flux cleaned = 0.00315322 Jy
! Component: 600  -  total flux cleaned = 0.00306684 Jy
! Component: 650  -  total flux cleaned = 0.00298436 Jy
! Component: 700  -  total flux cleaned = 0.00286723 Jy
! Component: 750  -  total flux cleaned = 0.00277451 Jy
! Component: 800  -  total flux cleaned = 0.00268576 Jy
! Component: 850  -  total flux cleaned = 0.00266886 Jy
! Component: 900  -  total flux cleaned = 0.00266859 Jy
! Component: 950  -  total flux cleaned = 0.00274637 Jy
! Component: 1000  -  total flux cleaned = 0.00282161 Jy
! Component: 1050  -  total flux cleaned = 0.00295308 Jy
! Component: 1100  -  total flux cleaned = 0.00303817 Jy
! Component: 1150  -  total flux cleaned = 0.00316184 Jy
! Component: 1200  -  total flux cleaned = 0.00325518 Jy
! Component: 1250  -  total flux cleaned = 0.00334603 Jy
! Component: 1300  -  total flux cleaned = 0.00343517 Jy
! Component: 1350  -  total flux cleaned = 0.0034476 Jy
! Component: 1400  -  total flux cleaned = 0.00345996 Jy
! Component: 1450  -  total flux cleaned = 0.00347184 Jy
! Component: 1500  -  total flux cleaned = 0.00347144 Jy
! Component: 1550  -  total flux cleaned = 0.00348266 Jy
! Component: 1600  -  total flux cleaned = 0.00352813 Jy
! Component: 1650  -  total flux cleaned = 0.00357264 Jy
! Component: 1700  -  total flux cleaned = 0.00358344 Jy
! Component: 1750  -  total flux cleaned = 0.00358364 Jy
! Component: 1800  -  total flux cleaned = 0.00362649 Jy
! Component: 1850  -  total flux cleaned = 0.00367914 Jy
! Component: 1900  -  total flux cleaned = 0.00369982 Jy
! Component: 1950  -  total flux cleaned = 0.00373054 Jy
! Component: 2000  -  total flux cleaned = 0.0037304 Jy
! Component: 2050  -  total flux cleaned = 0.00376061 Jy
! Component: 2100  -  total flux cleaned = 0.00377077 Jy
! Component: 2150  -  total flux cleaned = 0.00381997 Jy
! Component: 2200  -  total flux cleaned = 0.00385891 Jy
! Component: 2250  -  total flux cleaned = 0.00390723 Jy
! Component: 2300  -  total flux cleaned = 0.00393583 Jy
! Component: 2350  -  total flux cleaned = 0.00398298 Jy
! Component: 2400  -  total flux cleaned = 0.00402019 Jy
! Component: 2450  -  total flux cleaned = 0.00402015 Jy
! Component: 2500  -  total flux cleaned = 0.00405686 Jy
! Component: 2550  -  total flux cleaned = 0.00407488 Jy
! Component: 2600  -  total flux cleaned = 0.00410182 Jy
! Component: 2650  -  total flux cleaned = 0.00416428 Jy
! Component: 2700  -  total flux cleaned = 0.00423498 Jy
! Component: 2750  -  total flux cleaned = 0.00428767 Jy
! Component: 2800  -  total flux cleaned = 0.0043573 Jy
! Component: 2850  -  total flux cleaned = 0.00441776 Jy
! Component: 2900  -  total flux cleaned = 0.00447777 Jy
! Component: 2950  -  total flux cleaned = 0.00452889 Jy
! Component: 3000  -  total flux cleaned = 0.00458813 Jy
! Component: 3050  -  total flux cleaned = 0.00463855 Jy
! Component: 3100  -  total flux cleaned = 0.00468029 Jy
! Component: 3150  -  total flux cleaned = 0.0047384 Jy
! Component: 3200  -  total flux cleaned = 0.00482083 Jy
! Component: 3250  -  total flux cleaned = 0.00487002 Jy
! Component: 3300  -  total flux cleaned = 0.00493527 Jy
! Component: 3350  -  total flux cleaned = 0.00500827 Jy
! Component: 3400  -  total flux cleaned = 0.00508096 Jy
! Component: 3450  -  total flux cleaned = 0.00513726 Jy
! Component: 3500  -  total flux cleaned = 0.0052174 Jy
! Component: 3550  -  total flux cleaned = 0.00530525 Jy
! Component: 3600  -  total flux cleaned = 0.00537682 Jy
! Component: 3650  -  total flux cleaned = 0.0054482 Jy
! Component: 3700  -  total flux cleaned = 0.0055351 Jy
! Component: 3750  -  total flux cleaned = 0.00559028 Jy
! Component: 3800  -  total flux cleaned = 0.00568458 Jy
! Component: 3850  -  total flux cleaned = 0.00575513 Jy
! Component: 3900  -  total flux cleaned = 0.00584115 Jy
! Component: 3950  -  total flux cleaned = 0.00591135 Jy
! Component: 4000  -  total flux cleaned = 0.00600487 Jy
! Component: 4050  -  total flux cleaned = 0.00607496 Jy
! Total flux subtracted in 4096 components = 0.00613713 Jy
! Clean residual min=-0.000427 max=0.000452 Jy/beam
! Clean residual mean=0.000009 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.0594945 Jy
keep
! Adding 371 model components to the UV plane model.
! The established model now contains 458 components and 0.0594945 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0230+8141_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.546 x 11.6 at -22.21 degrees (North through East)
! Clean map  min=-0.0009357  max=0.03665 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0230+8141_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0366499 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000146028 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19532 1.19532 2.39064 4.78129 9.56257 19.1251 38.2503 76.5006
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.036 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0230+8141_S_uvs.log closed on Sun Oct  6 10:30:42 2013