! Started logfile: /g0/scr/pima/npcsa_uvs/J0157+7552_S_uvs.log on Sun Oct 6 10:30:27 2013 obs /g0/scr/pima/npcsa_uvs/J0157+7552_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0157+7552_S_uva.fits ! AN table 1: 54 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.714286 visibilities/baseline/integration-bin. ! Found source: J0157+7552 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4320 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0157+7552_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010314Jy sigma=0.933084 ! Fit after self-cal, rms=0.924919Jy sigma=0.797170 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.639 mas, bmaj=10.8 mas, bpa=-3.627 degrees ! Estimated noise=38.0245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0776962 Jy ! Component: 100 - total flux cleaned = 0.101244 Jy ! Total flux subtracted in 100 components = 0.101244 Jy ! Clean residual min=-0.016028 max=0.015711 Jy/beam ! Clean residual mean=0.000069 rms=0.005181 Jy/beam ! Combined flux in latest and established models = 0.101244 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.101244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098129Jy sigma=0.100720 ! Fit after self-cal, rms=0.097091Jy sigma=0.100096 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.972 mas, bmaj=12.78 mas, bpa=-1.821 degrees ! Estimated noise=13.5397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221372 Jy ! Component: 100 - total flux cleaned = 0.0337007 Jy ! Component: 150 - total flux cleaned = 0.0411094 Jy ! Component: 200 - total flux cleaned = 0.0462106 Jy ! Total flux subtracted in 200 components = 0.0462106 Jy ! Clean residual min=-0.010799 max=0.011815 Jy/beam ! Clean residual mean=0.000018 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 0.147454 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 110 components and 0.147454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098793Jy sigma=0.090126 ! Fit after self-cal, rms=0.098381Jy sigma=0.089882 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.90 HN 1.00* KP 0.86 ! LA 1.20 NL 0.94 OV 0.90 PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 1.00* KP 0.82 ! LA 1.05 NL 0.88 OV 1.02 PT 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.54 FD 0.94 HN 1.00* KP 0.87 ! LA 0.84 NL 0.85 OV 0.97 PT 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.00* KP 0.80 ! LA 0.83 NL 0.78 OV 0.84 PT 0.87 ! ! ! Fit before self-cal, rms=0.098381Jy sigma=0.089882 ! Fit after self-cal, rms=0.086374Jy sigma=0.083318 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.857 mas, bmaj=12.55 mas, bpa=-3.535 degrees ! Estimated noise=10.9586 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149019 Jy ! Component: 100 - total flux cleaned = -0.0172028 Jy ! Component: 150 - total flux cleaned = -0.0168435 Jy ! Component: 200 - total flux cleaned = -0.0165975 Jy ! Total flux subtracted in 200 components = -0.0165975 Jy ! Clean residual min=-0.006759 max=0.008647 Jy/beam ! Clean residual mean=-0.000001 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.130857 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 121 components and 0.130857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078991Jy sigma=0.085885 ! Fit after self-cal, rms=0.079087Jy sigma=0.085575 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079087Jy sigma=0.085575 ! Fit after self-cal, rms=0.071907Jy sigma=0.082839 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.653 mas, bmaj=12.32 mas, bpa=-5.691 degrees ! Estimated noise=9.08934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0120447 Jy ! Component: 100 - total flux cleaned = -0.0149788 Jy ! Component: 150 - total flux cleaned = -0.0153072 Jy ! Component: 200 - total flux cleaned = -0.0152325 Jy ! Total flux subtracted in 200 components = -0.0152325 Jy ! Clean residual min=-0.005621 max=0.006883 Jy/beam ! Clean residual mean=-0.000000 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.115624 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.115624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065999Jy sigma=0.085458 ! Fit after self-cal, rms=0.065912Jy sigma=0.085419 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201266 Jy ! Component: 100 - total flux cleaned = 0.000147068 Jy ! Component: 150 - total flux cleaned = 0.000235906 Jy ! Component: 200 - total flux cleaned = 0.000295305 Jy ! Total flux subtracted in 200 components = 0.000295305 Jy ! Clean residual min=-0.005615 max=0.006778 Jy/beam ! Clean residual mean=-0.000000 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.115919 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 142 components and 0.115919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065800Jy sigma=0.085494 ! Fit after self-cal, rms=0.065790Jy sigma=0.085480 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065790Jy sigma=0.085480 ! Fit after self-cal, rms=0.059737Jy sigma=0.082705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.45 mas, bmaj=12.09 mas, bpa=-7.754 degrees ! Estimated noise=7.51446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0095107 Jy ! Component: 100 - total flux cleaned = -0.0121476 Jy ! Component: 150 - total flux cleaned = -0.0133679 Jy ! Component: 200 - total flux cleaned = -0.0137273 Jy ! Total flux subtracted in 200 components = -0.0137273 Jy ! Clean residual min=-0.004668 max=0.005360 Jy/beam ! Clean residual mean=0.000000 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.102192 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 160 components and 0.102192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055068Jy sigma=0.085346 ! Fit after self-cal, rms=0.055060Jy sigma=0.085297 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46451e-05 Jy ! Component: 100 - total flux cleaned = 2.54e-05 Jy ! Component: 150 - total flux cleaned = 4.11017e-05 Jy ! Component: 200 - total flux cleaned = 7.14659e-05 Jy ! Total flux subtracted in 200 components = 7.14659e-05 Jy ! Clean residual min=-0.004573 max=0.005385 Jy/beam ! Clean residual mean=0.000000 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.102264 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 166 components and 0.102264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054998Jy sigma=0.085352 ! Fit after self-cal, rms=0.054990Jy sigma=0.085347 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054990Jy sigma=0.085347 ! Fit after self-cal, rms=0.050190Jy sigma=0.082606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.6 mas, bmaj=12.7 mas, bpa=-3.982 degrees ! Estimated noise=6.37626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00814374 Jy ! Component: 100 - total flux cleaned = -0.0103146 Jy ! Component: 150 - total flux cleaned = -0.0113858 Jy ! Component: 200 - total flux cleaned = -0.0118353 Jy ! Total flux subtracted in 200 components = -0.0118353 Jy ! Clean residual min=-0.004231 max=0.004606 Jy/beam ! Clean residual mean=-0.000000 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.0904282 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 179 components and 0.0904282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046318Jy sigma=0.085323 ! Fit after self-cal, rms=0.046300Jy sigma=0.085297 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.27432e-05 Jy ! Component: 100 - total flux cleaned = -9.25523e-05 Jy ! Component: 150 - total flux cleaned = -9.24531e-05 Jy ! Component: 200 - total flux cleaned = -9.36005e-05 Jy ! Total flux subtracted in 200 components = -9.36005e-05 Jy ! Clean residual min=-0.004196 max=0.004628 Jy/beam ! Clean residual mean=0.000000 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.0903346 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 181 components and 0.0903346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046246Jy sigma=0.085362 ! Fit after self-cal, rms=0.046244Jy sigma=0.085359 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.249 mas, bmaj=11.9 mas, bpa=-9.852 degrees ! Estimated noise=6.20551 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.249 x 11.9 at -9.852 degrees (North through East) ! Clean map min=-0.0038057 max=0.050599 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.155 mas, bmaj=10.38 mas, bpa=-12.13 degrees ! Estimated noise=16.3953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337615 Jy ! Component: 100 - total flux cleaned = 0.0477645 Jy ! Component: 150 - total flux cleaned = 0.0574241 Jy ! Component: 200 - total flux cleaned = 0.0644029 Jy ! Total flux subtracted in 200 components = 0.0644029 Jy ! Clean residual min=-0.006173 max=0.005541 Jy/beam ! Clean residual mean=0.000022 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.0644029 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.0644029 Jy ! Inverting map and beam ! Estimated beam: bmin=9.249 mas, bmaj=11.9 mas, bpa=-9.852 degrees ! Estimated noise=6.20551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00832113 Jy ! Component: 100 - total flux cleaned = 0.0131208 Jy ! Component: 150 - total flux cleaned = 0.0164806 Jy ! Component: 200 - total flux cleaned = 0.0189249 Jy ! Total flux subtracted in 200 components = 0.0189249 Jy ! Clean residual min=-0.004649 max=0.004407 Jy/beam ! Clean residual mean=0.000009 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.0833278 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 123 components and 0.0833279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.6 mas, bmaj=12.7 mas, bpa=-3.982 degrees ! Estimated noise=6.37626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215724 Jy ! Component: 100 - total flux cleaned = 0.00366569 Jy ! Component: 150 - total flux cleaned = 0.00473021 Jy ! Component: 200 - total flux cleaned = 0.00548501 Jy ! Total flux subtracted in 200 components = 0.00548501 Jy ! Clean residual min=-0.004618 max=0.004790 Jy/beam ! Clean residual mean=0.000002 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.0888129 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364438 Jy ! Component: 100 - total flux cleaned = 0.000559698 Jy ! Component: 150 - total flux cleaned = 0.000734604 Jy ! Component: 200 - total flux cleaned = 0.000891301 Jy ! Total flux subtracted in 200 components = 0.000891301 Jy ! Clean residual min=-0.004491 max=0.004750 Jy/beam ! Clean residual mean=0.000001 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.0897042 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 139 components and 0.0897042 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.249 mas, bmaj=11.9 mas, bpa=-9.852 degrees ! Estimated noise=6.20551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133206 Jy ! Component: 100 - total flux cleaned = -7.46021e-05 Jy ! Component: 150 - total flux cleaned = -3.37517e-05 Jy ! Component: 200 - total flux cleaned = 5.55991e-06 Jy ! Total flux subtracted in 200 components = 5.55991e-06 Jy ! Clean residual min=-0.004072 max=0.004281 Jy/beam ! Clean residual mean=0.000001 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.0897097 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 148 components and 0.0897097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046292Jy sigma=0.085310 ! Fit after self-cal, rms=0.046304Jy sigma=0.085296 wmodel /g0/scr/pima/npcsa_uvs/J0157+7552_S_map.mod ! Writing 148 model components to file: /g0/scr/pima/npcsa_uvs/J0157+7552_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J0157+7552_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0157+7552_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J0157+7552_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0157+7552_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042112 Jy ! Component: 100 - total flux cleaned = 0.000763153 Jy ! Component: 150 - total flux cleaned = 0.00120854 Jy ! Component: 200 - total flux cleaned = 0.00151231 Jy ! Component: 250 - total flux cleaned = 0.00151099 Jy ! Component: 300 - total flux cleaned = 0.00143491 Jy ! Component: 350 - total flux cleaned = 0.00153539 Jy ! Component: 400 - total flux cleaned = 0.00166443 Jy ! Component: 450 - total flux cleaned = 0.00193917 Jy ! Component: 500 - total flux cleaned = 0.00214033 Jy ! Component: 550 - total flux cleaned = 0.0024145 Jy ! Component: 600 - total flux cleaned = 0.00264956 Jy ! Component: 650 - total flux cleaned = 0.00284911 Jy ! Component: 700 - total flux cleaned = 0.00301642 Jy ! Component: 750 - total flux cleaned = 0.00310772 Jy ! Component: 800 - total flux cleaned = 0.00315221 Jy ! Component: 850 - total flux cleaned = 0.00313225 Jy ! Component: 900 - total flux cleaned = 0.00319421 Jy ! Component: 950 - total flux cleaned = 0.00319466 Jy ! Component: 1000 - total flux cleaned = 0.0031568 Jy ! Component: 1050 - total flux cleaned = 0.00312053 Jy ! Component: 1100 - total flux cleaned = 0.00310259 Jy ! Component: 1150 - total flux cleaned = 0.00311954 Jy ! Component: 1200 - total flux cleaned = 0.0030702 Jy ! Component: 1250 - total flux cleaned = 0.00308713 Jy ! Component: 1300 - total flux cleaned = 0.00304041 Jy ! Component: 1350 - total flux cleaned = 0.00302569 Jy ! Component: 1400 - total flux cleaned = 0.00305571 Jy ! Component: 1450 - total flux cleaned = 0.00304096 Jy ! Component: 1500 - total flux cleaned = 0.00302659 Jy ! Component: 1550 - total flux cleaned = 0.00301263 Jy ! Component: 1600 - total flux cleaned = 0.00305325 Jy ! Component: 1650 - total flux cleaned = 0.00309332 Jy ! Component: 1700 - total flux cleaned = 0.00313275 Jy ! Component: 1750 - total flux cleaned = 0.00315868 Jy ! Component: 1800 - total flux cleaned = 0.00319699 Jy ! Component: 1850 - total flux cleaned = 0.00323491 Jy ! Component: 1900 - total flux cleaned = 0.00325983 Jy ! Component: 1950 - total flux cleaned = 0.00329677 Jy ! Component: 2000 - total flux cleaned = 0.00329651 Jy ! Component: 2050 - total flux cleaned = 0.00333287 Jy ! Component: 2100 - total flux cleaned = 0.00339283 Jy ! Component: 2150 - total flux cleaned = 0.00349981 Jy ! Component: 2200 - total flux cleaned = 0.00348796 Jy ! Component: 2250 - total flux cleaned = 0.00351154 Jy ! Component: 2300 - total flux cleaned = 0.0035233 Jy ! Component: 2350 - total flux cleaned = 0.00353494 Jy ! Component: 2400 - total flux cleaned = 0.00354649 Jy ! Component: 2450 - total flux cleaned = 0.00355803 Jy ! Component: 2500 - total flux cleaned = 0.00355811 Jy ! Component: 2550 - total flux cleaned = 0.00353538 Jy ! Component: 2600 - total flux cleaned = 0.00355797 Jy ! Component: 2650 - total flux cleaned = 0.0035467 Jy ! Component: 2700 - total flux cleaned = 0.00354668 Jy ! Component: 2750 - total flux cleaned = 0.00352432 Jy ! Component: 2800 - total flux cleaned = 0.0035355 Jy ! Component: 2850 - total flux cleaned = 0.00351316 Jy ! Component: 2900 - total flux cleaned = 0.00352436 Jy ! Component: 2950 - total flux cleaned = 0.00352436 Jy ! Component: 3000 - total flux cleaned = 0.00350211 Jy ! Component: 3050 - total flux cleaned = 0.00349104 Jy ! Component: 3100 - total flux cleaned = 0.00348001 Jy ! Component: 3150 - total flux cleaned = 0.0034469 Jy ! Component: 3200 - total flux cleaned = 0.00345789 Jy ! Component: 3250 - total flux cleaned = 0.00342468 Jy ! Component: 3300 - total flux cleaned = 0.0034026 Jy ! Component: 3350 - total flux cleaned = 0.00340262 Jy ! Component: 3400 - total flux cleaned = 0.00341374 Jy ! Component: 3450 - total flux cleaned = 0.00339161 Jy ! Component: 3500 - total flux cleaned = 0.00340269 Jy ! Component: 3550 - total flux cleaned = 0.00338052 Jy ! Component: 3600 - total flux cleaned = 0.00338046 Jy ! Component: 3650 - total flux cleaned = 0.00339165 Jy ! Component: 3700 - total flux cleaned = 0.00340276 Jy ! Component: 3750 - total flux cleaned = 0.00338053 Jy ! Component: 3800 - total flux cleaned = 0.00338057 Jy ! Component: 3850 - total flux cleaned = 0.00340284 Jy ! Component: 3900 - total flux cleaned = 0.00339171 Jy ! Component: 3950 - total flux cleaned = 0.00340289 Jy ! Component: 4000 - total flux cleaned = 0.00339167 Jy ! Component: 4050 - total flux cleaned = 0.0034029 Jy ! Total flux subtracted in 4096 components = 0.00339166 Jy ! Clean residual min=-0.000645 max=0.000651 Jy/beam ! Clean residual mean=0.000002 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.0931014 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 473 components and 0.0931013 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J0157+7552_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.249 x 11.9 at -9.852 degrees (North through East) ! Clean map min=-0.0017272 max=0.05035 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0157+7552_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0503497 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207701 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23755 1.23755 2.47511 4.95022 9.90043 19.8009 39.6017 79.2035 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J0157+7552_S_uvs.log closed on Sun Oct 6 10:30:31 2013