! Started logfile: /g0/scr/pima/npcsa_uvs/J0009+7603_X_uvs.log on Sun Oct  6 10:25:44 2013
obs /g0/scr/pima/npcsa_uvs/J0009+7603_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0009+7603_X_uva.fits
! AN table 1: 55 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.96202 visibilities/baseline/integration-bin.
! Found source: J0009+7603
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9524 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0009+7603_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005431Jy  sigma=0.809543
! Fit after  self-cal, rms=0.950557Jy  sigma=0.723674
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6512 mas, bmaj=2.717 mas, bpa=-10.06 degrees
! Estimated noise=19.3292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0591807 Jy
! Component: 100  -  total flux cleaned = 0.0721628 Jy
! Total flux subtracted in 100 components = 0.0721628 Jy
! Clean residual min=-0.006691 max=0.006710 Jy/beam
! Clean residual mean=0.000006 rms=0.001617 Jy/beam
! Combined flux in latest and established models = 0.0721629 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0721629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092665Jy  sigma=0.084314
! Fit after  self-cal, rms=0.090406Jy  sigma=0.082715
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8553 mas, bmaj=2.787 mas, bpa=-10.15 degrees
! Estimated noise=10.1799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00951427 Jy
! Component: 100  -  total flux cleaned = 0.0140173 Jy
! Component: 150  -  total flux cleaned = 0.0163463 Jy
! Component: 200  -  total flux cleaned = 0.0172195 Jy
! Total flux subtracted in 200 components = 0.0172195 Jy
! Clean residual min=-0.003843 max=0.004598 Jy/beam
! Clean residual mean=0.000009 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.0893823 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 17 components and 0.0893823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091949Jy  sigma=0.080352
! Fit after  self-cal, rms=0.091795Jy  sigma=0.080230
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.91     HN        1.03     KP        0.84     
!   LA        0.92     MK        0.96     NL        0.92     OV        0.90     
!   PT        0.95     SC        0.87     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.91     HN        0.92     KP        0.85     
!   LA        0.86     MK        0.87     NL        0.83     OV        0.84     
!   PT        1.15     SC        0.80     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.84     HN        0.84     KP        0.72     
!   LA        0.91     MK        0.86     NL        0.84     OV        0.87     
!   PT        1.08     SC        0.87     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     FD        0.90     HN        0.73     KP        0.77     
!   LA        0.89     MK        0.78     NL        1.01     OV        0.85     
!   PT        1.03     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.091795Jy  sigma=0.080230
! Fit after  self-cal, rms=0.077530Jy  sigma=0.077181
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8457 mas, bmaj=2.766 mas, bpa=-10.18 degrees
! Estimated noise=7.87577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0138404 Jy
! Component: 100  -  total flux cleaned = -0.0166323 Jy
! Component: 150  -  total flux cleaned = -0.0163111 Jy
! Component: 200  -  total flux cleaned = -0.0162749 Jy
! Total flux subtracted in 200 components = -0.0162749 Jy
! Clean residual min=-0.002715 max=0.002254 Jy/beam
! Clean residual mean=0.000003 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.0731075 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.0731074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070970Jy  sigma=0.079234
! Fit after  self-cal, rms=0.071049Jy  sigma=0.079157
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071049Jy  sigma=0.079157
! Fit after  self-cal, rms=0.061179Jy  sigma=0.077058
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8376 mas, bmaj=2.759 mas, bpa=-10.19 degrees
! Estimated noise=6.20905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0107875 Jy
! Component: 100  -  total flux cleaned = -0.0131584 Jy
! Component: 150  -  total flux cleaned = -0.0132989 Jy
! Component: 200  -  total flux cleaned = -0.0133006 Jy
! Total flux subtracted in 200 components = -0.0133006 Jy
! Clean residual min=-0.002156 max=0.001831 Jy/beam
! Clean residual mean=0.000002 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0598068 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.0598068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056120Jy  sigma=0.079112
! Fit after  self-cal, rms=0.056095Jy  sigma=0.079075
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.86404e-05 Jy
! Component: 100  -  total flux cleaned = -3.61539e-06 Jy
! Component: 150  -  total flux cleaned = -1.56129e-05 Jy
! Component: 200  -  total flux cleaned = -2.67062e-05 Jy
! Total flux subtracted in 200 components = -2.67062e-05 Jy
! Clean residual min=-0.002227 max=0.001864 Jy/beam
! Clean residual mean=0.000002 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.0597801 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.0597801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056057Jy  sigma=0.079100
! Fit after  self-cal, rms=0.056058Jy  sigma=0.079096
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056058Jy  sigma=0.079096
! Fit after  self-cal, rms=0.048064Jy  sigma=0.077006
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8283 mas, bmaj=2.753 mas, bpa=-10.14 degrees
! Estimated noise=4.885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00838311 Jy
! Component: 100  -  total flux cleaned = -0.0102959 Jy
! Component: 150  -  total flux cleaned = -0.011079 Jy
! Component: 200  -  total flux cleaned = -0.0113685 Jy
! Total flux subtracted in 200 components = -0.0113685 Jy
! Clean residual min=-0.001729 max=0.001496 Jy/beam
! Clean residual mean=0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0484116 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 45 components and 0.0484116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044139Jy  sigma=0.079045
! Fit after  self-cal, rms=0.044137Jy  sigma=0.079040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.65374e-05 Jy
! Component: 100  -  total flux cleaned = -0.000121095 Jy
! Component: 150  -  total flux cleaned = -9.641e-05 Jy
! Component: 200  -  total flux cleaned = -9.66663e-05 Jy
! Total flux subtracted in 200 components = -9.66663e-05 Jy
! Clean residual min=-0.001729 max=0.001514 Jy/beam
! Clean residual mean=0.000002 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.048315 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.048315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044102Jy  sigma=0.079079
! Fit after  self-cal, rms=0.044102Jy  sigma=0.079077
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044102Jy  sigma=0.079077
! Fit after  self-cal, rms=0.037876Jy  sigma=0.077007
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.997 mas, bmaj=3.071 mas, bpa=-10.2 degrees
! Estimated noise=5.18893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00703517 Jy
! Component: 100  -  total flux cleaned = -0.00863572 Jy
! Component: 150  -  total flux cleaned = -0.00915199 Jy
! Component: 200  -  total flux cleaned = -0.00925153 Jy
! Total flux subtracted in 200 components = -0.00925153 Jy
! Clean residual min=-0.001630 max=0.001250 Jy/beam
! Clean residual mean=0.000003 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.0390634 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.0390634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034782Jy  sigma=0.079079
! Fit after  self-cal, rms=0.034774Jy  sigma=0.079062
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.20051e-05 Jy
! Component: 100  -  total flux cleaned = -5.72212e-05 Jy
! Component: 150  -  total flux cleaned = -3.65252e-05 Jy
! Component: 200  -  total flux cleaned = -2.30038e-05 Jy
! Total flux subtracted in 200 components = -2.30038e-05 Jy
! Clean residual min=-0.001638 max=0.001225 Jy/beam
! Clean residual mean=0.000003 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.0390404 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.0390404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034775Jy  sigma=0.079060
! Fit after  self-cal, rms=0.034774Jy  sigma=0.079056
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=2.751 mas, bpa=-10.06 degrees
! Estimated noise=3.84889 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8209 x 2.751 at -10.06 degrees (North through East)
! Clean map  min=-0.0012976  max=0.031065 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6335 mas, bmaj=2.713 mas, bpa=-10.07 degrees
! Estimated noise=7.00118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217519 Jy
! Component: 100  -  total flux cleaned = 0.0272843 Jy
! Component: 150  -  total flux cleaned = 0.0303163 Jy
! Component: 200  -  total flux cleaned = 0.0318655 Jy
! Total flux subtracted in 200 components = 0.0318655 Jy
! Clean residual min=-0.002555 max=0.002406 Jy/beam
! Clean residual mean=0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0318654 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0318654 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=2.751 mas, bpa=-10.06 degrees
! Estimated noise=3.84889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284663 Jy
! Component: 100  -  total flux cleaned = 0.00431965 Jy
! Component: 150  -  total flux cleaned = 0.00525286 Jy
! Component: 200  -  total flux cleaned = 0.00587201 Jy
! Total flux subtracted in 200 components = 0.00587201 Jy
! Clean residual min=-0.001419 max=0.001313 Jy/beam
! Clean residual mean=0.000002 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.0377375 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 36 components and 0.0377375 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.997 mas, bmaj=3.071 mas, bpa=-10.2 degrees
! Estimated noise=5.18893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000813328 Jy
! Component: 100  -  total flux cleaned = 0.00112906 Jy
! Component: 150  -  total flux cleaned = 0.00121502 Jy
! Component: 200  -  total flux cleaned = 0.00124067 Jy
! Total flux subtracted in 200 components = 0.00124067 Jy
! Clean residual min=-0.001636 max=0.001224 Jy/beam
! Clean residual mean=0.000003 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0389781 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.45314e-05 Jy
! Component: 100  -  total flux cleaned = 3.14444e-05 Jy
! Component: 150  -  total flux cleaned = 3.4662e-05 Jy
! Component: 200  -  total flux cleaned = 4.10819e-05 Jy
! Total flux subtracted in 200 components = 4.10819e-05 Jy
! Clean residual min=-0.001633 max=0.001226 Jy/beam
! Clean residual mean=0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0390192 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 56 components and 0.0390192 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=2.751 mas, bpa=-10.06 degrees
! Estimated noise=3.84889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246775 Jy
! Component: 100  -  total flux cleaned = -0.000293929 Jy
! Component: 150  -  total flux cleaned = -0.000302789 Jy
! Component: 200  -  total flux cleaned = -0.000302954 Jy
! Total flux subtracted in 200 components = -0.000302954 Jy
! Clean residual min=-0.001367 max=0.001223 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0387163 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.0387163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034733Jy  sigma=0.079148
! Fit after  self-cal, rms=0.034702Jy  sigma=0.079090
wmodel /g0/scr/pima/npcsa_uvs/J0009+7603_X_map.mod
! Writing 62 model components to file: /g0/scr/pima/npcsa_uvs/J0009+7603_X_map.mod
wobs /g0/scr/pima/npcsa_uvs/J0009+7603_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0009+7603_X_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J0009+7603_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0009+7603_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000248629 Jy
! Component: 100  -  total flux cleaned = -0.000312436 Jy
! Component: 150  -  total flux cleaned = -0.000373399 Jy
! Component: 200  -  total flux cleaned = -0.000354028 Jy
! Component: 250  -  total flux cleaned = -0.000335546 Jy
! Component: 300  -  total flux cleaned = -0.000280441 Jy
! Component: 350  -  total flux cleaned = -0.000208176 Jy
! Component: 400  -  total flux cleaned = -0.000155275 Jy
! Component: 450  -  total flux cleaned = -8.62732e-05 Jy
! Component: 500  -  total flux cleaned = -5.23324e-05 Jy
! Component: 550  -  total flux cleaned = -2.1119e-06 Jy
! Component: 600  -  total flux cleaned = 4.67518e-05 Jy
! Component: 650  -  total flux cleaned = 6.23105e-05 Jy
! Component: 700  -  total flux cleaned = 3.10308e-05 Jy
! Component: 750  -  total flux cleaned = 1.57726e-05 Jy
! Component: 800  -  total flux cleaned = 3.11173e-05 Jy
! Component: 850  -  total flux cleaned = 3.09915e-05 Jy
! Component: 900  -  total flux cleaned = 1.60285e-05 Jy
! Component: 950  -  total flux cleaned = 1.261e-06 Jy
! Component: 1000  -  total flux cleaned = -2.77544e-05 Jy
! Component: 1050  -  total flux cleaned = -5.61574e-05 Jy
! Component: 1100  -  total flux cleaned = -9.79498e-05 Jy
! Component: 1150  -  total flux cleaned = -9.78176e-05 Jy
! Component: 1200  -  total flux cleaned = -9.77696e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000111383 Jy
! Component: 1300  -  total flux cleaned = -7.1808e-05 Jy
! Component: 1350  -  total flux cleaned = -9.82919e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000163454 Jy
! Component: 1450  -  total flux cleaned = -0.000163129 Jy
! Component: 1500  -  total flux cleaned = -0.000124671 Jy
! Component: 1550  -  total flux cleaned = -0.000137198 Jy
! Component: 1600  -  total flux cleaned = -0.000112197 Jy
! Component: 1650  -  total flux cleaned = -0.000112043 Jy
! Component: 1700  -  total flux cleaned = -8.72425e-05 Jy
! Component: 1750  -  total flux cleaned = -6.28272e-05 Jy
! Component: 1800  -  total flux cleaned = -3.86613e-05 Jy
! Component: 1850  -  total flux cleaned = -2.66261e-05 Jy
! Component: 1900  -  total flux cleaned = -1.45849e-05 Jy
! Component: 1950  -  total flux cleaned = 8.9054e-06 Jy
! Component: 2000  -  total flux cleaned = -2.87269e-06 Jy
! Component: 2050  -  total flux cleaned = -2.94159e-06 Jy
! Component: 2100  -  total flux cleaned = 4.2491e-05 Jy
! Component: 2150  -  total flux cleaned = -1.41565e-05 Jy
! Component: 2200  -  total flux cleaned = -2.53234e-05 Jy
! Component: 2250  -  total flux cleaned = -3.63018e-05 Jy
! Component: 2300  -  total flux cleaned = -1.41931e-05 Jy
! Component: 2350  -  total flux cleaned = -3.21399e-06 Jy
! Component: 2400  -  total flux cleaned = -1.40005e-05 Jy
! Component: 2450  -  total flux cleaned = -3.20518e-06 Jy
! Component: 2500  -  total flux cleaned = -1.39522e-05 Jy
! Component: 2550  -  total flux cleaned = -2.46237e-05 Jy
! Component: 2600  -  total flux cleaned = 3.86119e-05 Jy
! Component: 2650  -  total flux cleaned = -2.44468e-05 Jy
! Component: 2700  -  total flux cleaned = -3.49299e-05 Jy
! Component: 2750  -  total flux cleaned = -4.50282e-05 Jy
! Component: 2800  -  total flux cleaned = -3.46985e-05 Jy
! Component: 2850  -  total flux cleaned = -5.51358e-05 Jy
! Component: 2900  -  total flux cleaned = -3.49464e-05 Jy
! Component: 2950  -  total flux cleaned = -6.50736e-05 Jy
! Component: 3000  -  total flux cleaned = -4.51465e-05 Jy
! Component: 3050  -  total flux cleaned = -7.49351e-05 Jy
! Component: 3100  -  total flux cleaned = -7.49655e-05 Jy
! Component: 3150  -  total flux cleaned = -9.46022e-05 Jy
! Component: 3200  -  total flux cleaned = -8.47897e-05 Jy
! Component: 3250  -  total flux cleaned = -8.47744e-05 Jy
! Component: 3300  -  total flux cleaned = -0.000142378 Jy
! Component: 3350  -  total flux cleaned = -0.000113657 Jy
! Component: 3400  -  total flux cleaned = -0.000142109 Jy
! Component: 3450  -  total flux cleaned = -0.00012314 Jy
! Component: 3500  -  total flux cleaned = -0.000170035 Jy
! Component: 3550  -  total flux cleaned = -0.000141969 Jy
! Component: 3600  -  total flux cleaned = -0.000160445 Jy
! Component: 3650  -  total flux cleaned = -0.000123517 Jy
! Component: 3700  -  total flux cleaned = -0.000160311 Jy
! Component: 3750  -  total flux cleaned = -0.000196885 Jy
! Component: 3800  -  total flux cleaned = -0.000205944 Jy
! Component: 3850  -  total flux cleaned = -0.000187805 Jy
! Component: 3900  -  total flux cleaned = -0.00017882 Jy
! Component: 3950  -  total flux cleaned = -0.000232486 Jy
! Component: 4000  -  total flux cleaned = -0.000250348 Jy
! Component: 4050  -  total flux cleaned = -0.000303581 Jy
! Total flux subtracted in 4096 components = -0.000285913 Jy
! Clean residual min=-0.000501 max=0.000535 Jy/beam
! Clean residual mean=0.000001 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.0384304 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 360 components and 0.0384303 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J0009+7603_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8209 x 2.751 at -10.06 degrees (North through East)
! Clean map  min=-0.00098651  max=0.030937 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0009+7603_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0309372 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0001568 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.5205 1.5205 3.04101 6.08201 12.164 24.328 48.6561 97.3122
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.03 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J0009+7603_X_uvs.log closed on Sun Oct  6 10:25:48 2013