! Started logfile: /g0/scr/pima/npcsa_uvs/J0009+7603_S_uvs.log on Sun Oct 6 10:30:11 2013 obs /g0/scr/pima/npcsa_uvs/J0009+7603_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J0009+7603_S_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.545859 visibilities/baseline/integration-bin. ! Found source: J0009+7603 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5404 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J0009+7603_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003994Jy sigma=0.767247 ! Fit after self-cal, rms=0.948196Jy sigma=0.687063 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=12.57 mas, bpa=-1.861 degrees ! Estimated noise=31.2173 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0650306 Jy ! Component: 100 - total flux cleaned = 0.0792699 Jy ! Total flux subtracted in 100 components = 0.0792699 Jy ! Clean residual min=-0.008453 max=0.007831 Jy/beam ! Clean residual mean=0.000012 rms=0.002326 Jy/beam ! Combined flux in latest and established models = 0.0792699 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0792699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086550Jy sigma=0.070545 ! Fit after self-cal, rms=0.084758Jy sigma=0.069125 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.176 mas, bmaj=12.07 mas, bpa=-0.9699 degrees ! Estimated noise=14.4918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004707 Jy ! Component: 100 - total flux cleaned = 0.00587298 Jy ! Component: 150 - total flux cleaned = 0.00624416 Jy ! Component: 200 - total flux cleaned = 0.00636594 Jy ! Total flux subtracted in 200 components = 0.00636594 Jy ! Clean residual min=-0.007746 max=0.005506 Jy/beam ! Clean residual mean=0.000019 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.0856358 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0856358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085631Jy sigma=0.068211 ! Fit after self-cal, rms=0.085488Jy sigma=0.068129 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 0.71 KP 0.86 ! LA 0.83 MK 0.77 NL 0.92 OV 0.93 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.84 HN 0.70 KP 0.83 ! LA 0.83 MK 0.79 NL 0.93 OV 0.98 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.90 HN 0.74 KP 1.08 ! LA 0.63 MK 0.88 NL 1.21 OV 0.95 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.91 HN 0.74 KP 0.83 ! LA 0.57 MK 0.85 NL 0.93 OV 0.76 ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.085488Jy sigma=0.068129 ! Fit after self-cal, rms=0.073552Jy sigma=0.063991 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=12.26 mas, bpa=-1.117 degrees ! Estimated noise=11.2502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0140064 Jy ! Component: 100 - total flux cleaned = -0.0172406 Jy ! Component: 150 - total flux cleaned = -0.0186644 Jy ! Component: 200 - total flux cleaned = -0.0193455 Jy ! Total flux subtracted in 200 components = -0.0193455 Jy ! Clean residual min=-0.002556 max=0.002527 Jy/beam ! Clean residual mean=0.000003 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0662903 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 0.0662903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066169Jy sigma=0.066327 ! Fit after self-cal, rms=0.066349Jy sigma=0.066083 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066349Jy sigma=0.066083 ! Fit after self-cal, rms=0.058485Jy sigma=0.063607 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.167 mas, bmaj=12.34 mas, bpa=-1.069 degrees ! Estimated noise=8.88188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110067 Jy ! Component: 100 - total flux cleaned = -0.0134439 Jy ! Component: 150 - total flux cleaned = -0.0143946 Jy ! Component: 200 - total flux cleaned = -0.0146403 Jy ! Total flux subtracted in 200 components = -0.0146403 Jy ! Clean residual min=-0.001988 max=0.001818 Jy/beam ! Clean residual mean=0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.05165 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.05165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052750Jy sigma=0.065950 ! Fit after self-cal, rms=0.052784Jy sigma=0.065889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203696 Jy ! Component: 100 - total flux cleaned = -0.00027737 Jy ! Component: 150 - total flux cleaned = -0.000337183 Jy ! Component: 200 - total flux cleaned = -0.000387884 Jy ! Total flux subtracted in 200 components = -0.000387884 Jy ! Clean residual min=-0.001986 max=0.001792 Jy/beam ! Clean residual mean=0.000004 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0512621 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0512621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052736Jy sigma=0.065901 ! Fit after self-cal, rms=0.052739Jy sigma=0.065888 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052739Jy sigma=0.065888 ! Fit after self-cal, rms=0.046093Jy sigma=0.063444 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.183 mas, bmaj=12.37 mas, bpa=-1.04 degrees ! Estimated noise=6.9898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00865464 Jy ! Component: 100 - total flux cleaned = -0.0105486 Jy ! Component: 150 - total flux cleaned = -0.011165 Jy ! Component: 200 - total flux cleaned = -0.0114953 Jy ! Total flux subtracted in 200 components = -0.0114953 Jy ! Clean residual min=-0.001458 max=0.001387 Jy/beam ! Clean residual mean=0.000003 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0397668 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.0397668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041568Jy sigma=0.065829 ! Fit after self-cal, rms=0.041576Jy sigma=0.065816 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.4164e-05 Jy ! Component: 100 - total flux cleaned = -0.000134418 Jy ! Component: 150 - total flux cleaned = -0.000157 Jy ! Component: 200 - total flux cleaned = -0.000176566 Jy ! Total flux subtracted in 200 components = -0.000176566 Jy ! Clean residual min=-0.001475 max=0.001387 Jy/beam ! Clean residual mean=0.000003 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0395902 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.0395902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041556Jy sigma=0.065822 ! Fit after self-cal, rms=0.041568Jy sigma=0.065802 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041568Jy sigma=0.065802 ! Fit after self-cal, rms=0.036293Jy sigma=0.063363 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.527 mas, bmaj=12.9 mas, bpa=9.031 degrees ! Estimated noise=6.12797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00684955 Jy ! Component: 100 - total flux cleaned = -0.00836058 Jy ! Component: 150 - total flux cleaned = -0.0088697 Jy ! Component: 200 - total flux cleaned = -0.0090607 Jy ! Total flux subtracted in 200 components = -0.0090607 Jy ! Clean residual min=-0.001243 max=0.001023 Jy/beam ! Clean residual mean=0.000005 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0305295 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.0305295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032783Jy sigma=0.065689 ! Fit after self-cal, rms=0.032781Jy sigma=0.065667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138255 Jy ! Component: 100 - total flux cleaned = -0.000188091 Jy ! Component: 150 - total flux cleaned = -0.000203362 Jy ! Component: 200 - total flux cleaned = -0.000209403 Jy ! Total flux subtracted in 200 components = -0.000209403 Jy ! Clean residual min=-0.001202 max=0.000990 Jy/beam ! Clean residual mean=0.000005 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0303201 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.0303201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032762Jy sigma=0.065693 ! Fit after self-cal, rms=0.032755Jy sigma=0.065673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=12.39 mas, bpa=-1.011 degrees ! Estimated noise=5.49971 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 12.39 at -1.011 degrees (North through East) ! Clean map min=-0.0030199 max=0.031527 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=12.82 mas, bpa=-1.808 degrees ! Estimated noise=11.7902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251333 Jy ! Component: 100 - total flux cleaned = 0.0301007 Jy ! Component: 150 - total flux cleaned = 0.030939 Jy ! Component: 200 - total flux cleaned = 0.031232 Jy ! Total flux subtracted in 200 components = 0.031232 Jy ! Clean residual min=-0.002951 max=0.002985 Jy/beam ! Clean residual mean=0.000000 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.031232 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.031232 Jy ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=12.39 mas, bpa=-1.011 degrees ! Estimated noise=5.49971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375798 Jy ! Component: 100 - total flux cleaned = -0.000707095 Jy ! Component: 150 - total flux cleaned = -0.00085517 Jy ! Component: 200 - total flux cleaned = -0.000855564 Jy ! Total flux subtracted in 200 components = -0.000855564 Jy ! Clean residual min=-0.001713 max=0.001372 Jy/beam ! Clean residual mean=0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0303764 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0303764 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.527 mas, bmaj=12.9 mas, bpa=9.031 degrees ! Estimated noise=6.12797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.20561e-05 Jy ! Component: 100 - total flux cleaned = 4.81639e-05 Jy ! Component: 150 - total flux cleaned = 4.79863e-05 Jy ! Component: 200 - total flux cleaned = 4.94851e-05 Jy ! Total flux subtracted in 200 components = 4.94851e-05 Jy ! Clean residual min=-0.001423 max=0.001181 Jy/beam ! Clean residual mean=0.000004 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0304259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.61502e-05 Jy ! Component: 100 - total flux cleaned = 1.67159e-05 Jy ! Component: 150 - total flux cleaned = 2.92366e-05 Jy ! Component: 200 - total flux cleaned = 2.95621e-05 Jy ! Total flux subtracted in 200 components = 2.95621e-05 Jy ! Clean residual min=-0.001269 max=0.001045 Jy/beam ! Clean residual mean=0.000004 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0304555 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.0304555 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=12.39 mas, bpa=-1.011 degrees ! Estimated noise=5.49971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.60812e-05 Jy ! Component: 100 - total flux cleaned = 6.60381e-05 Jy ! Component: 150 - total flux cleaned = 5.59633e-05 Jy ! Component: 200 - total flux cleaned = 4.66462e-05 Jy ! Total flux subtracted in 200 components = 4.66462e-05 Jy ! Clean residual min=-0.001190 max=0.001072 Jy/beam ! Clean residual mean=0.000002 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0305021 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0305021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032675Jy sigma=0.065820 ! Fit after self-cal, rms=0.032671Jy sigma=0.065811 wmodel /g0/scr/pima/npcsa_uvs/J0009+7603_S_map.mod ! Writing 50 model components to file: /g0/scr/pima/npcsa_uvs/J0009+7603_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J0009+7603_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J0009+7603_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J0009+7603_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J0009+7603_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250588 Jy ! Component: 100 - total flux cleaned = -0.000212516 Jy ! Component: 150 - total flux cleaned = -0.000264177 Jy ! Component: 200 - total flux cleaned = -0.000329644 Jy ! Component: 250 - total flux cleaned = -0.000376137 Jy ! Component: 300 - total flux cleaned = -0.000435193 Jy ! Component: 350 - total flux cleaned = -0.000449575 Jy ! Component: 400 - total flux cleaned = -0.000423109 Jy ! Component: 450 - total flux cleaned = -0.000384703 Jy ! Component: 500 - total flux cleaned = -0.000347638 Jy ! Component: 550 - total flux cleaned = -0.000264494 Jy ! Component: 600 - total flux cleaned = -0.000264496 Jy ! Component: 650 - total flux cleaned = -0.000253471 Jy ! Component: 700 - total flux cleaned = -0.00028568 Jy ! Component: 750 - total flux cleaned = -0.000306569 Jy ! Component: 800 - total flux cleaned = -0.000296082 Jy ! Component: 850 - total flux cleaned = -0.000315724 Jy ! Component: 900 - total flux cleaned = -0.000344849 Jy ! Component: 950 - total flux cleaned = -0.000402193 Jy ! Component: 1000 - total flux cleaned = -0.000420936 Jy ! Component: 1050 - total flux cleaned = -0.000476345 Jy ! Component: 1100 - total flux cleaned = -0.000521729 Jy ! Component: 1150 - total flux cleaned = -0.000548549 Jy ! Component: 1200 - total flux cleaned = -0.00055747 Jy ! Component: 1250 - total flux cleaned = -0.000583516 Jy ! Component: 1300 - total flux cleaned = -0.000626166 Jy ! Component: 1350 - total flux cleaned = -0.000659656 Jy ! Component: 1400 - total flux cleaned = -0.000667989 Jy ! Component: 1450 - total flux cleaned = -0.000676235 Jy ! Component: 1500 - total flux cleaned = -0.000700657 Jy ! Component: 1550 - total flux cleaned = -0.0006765 Jy ! Component: 1600 - total flux cleaned = -0.000668427 Jy ! Component: 1650 - total flux cleaned = -0.000684218 Jy ! Component: 1700 - total flux cleaned = -0.00069973 Jy ! Component: 1750 - total flux cleaned = -0.00069977 Jy ! Component: 1800 - total flux cleaned = -0.00073802 Jy ! Component: 1850 - total flux cleaned = -0.000775947 Jy ! Component: 1900 - total flux cleaned = -0.00077586 Jy ! Component: 1950 - total flux cleaned = -0.000775879 Jy ! Component: 2000 - total flux cleaned = -0.000798147 Jy ! Component: 2050 - total flux cleaned = -0.000776041 Jy ! Component: 2100 - total flux cleaned = -0.000783314 Jy ! Component: 2150 - total flux cleaned = -0.000776044 Jy ! Component: 2200 - total flux cleaned = -0.000776038 Jy ! Component: 2250 - total flux cleaned = -0.000790322 Jy ! Component: 2300 - total flux cleaned = -0.000761914 Jy ! Component: 2350 - total flux cleaned = -0.000769126 Jy ! Component: 2400 - total flux cleaned = -0.000741124 Jy ! Component: 2450 - total flux cleaned = -0.000748149 Jy ! Component: 2500 - total flux cleaned = -0.000761991 Jy ! Component: 2550 - total flux cleaned = -0.000727568 Jy ! Component: 2600 - total flux cleaned = -0.000720749 Jy ! Component: 2650 - total flux cleaned = -0.000720741 Jy ! Component: 2700 - total flux cleaned = -0.000693712 Jy ! Component: 2750 - total flux cleaned = -0.000666874 Jy ! Component: 2800 - total flux cleaned = -0.000640217 Jy ! Component: 2850 - total flux cleaned = -0.000646898 Jy ! Component: 2900 - total flux cleaned = -0.000633704 Jy ! Component: 2950 - total flux cleaned = -0.000594275 Jy ! Component: 3000 - total flux cleaned = -0.00057466 Jy ! Component: 3050 - total flux cleaned = -0.000548716 Jy ! Component: 3100 - total flux cleaned = -0.000516336 Jy ! Component: 3150 - total flux cleaned = -0.000490531 Jy ! Component: 3200 - total flux cleaned = -0.000477647 Jy ! Component: 3250 - total flux cleaned = -0.000439219 Jy ! Component: 3300 - total flux cleaned = -0.000445598 Jy ! Component: 3350 - total flux cleaned = -0.000426506 Jy ! Component: 3400 - total flux cleaned = -0.00038846 Jy ! Component: 3450 - total flux cleaned = -0.000356888 Jy ! Component: 3500 - total flux cleaned = -0.000325404 Jy ! Component: 3550 - total flux cleaned = -0.000287667 Jy ! Component: 3600 - total flux cleaned = -0.000256266 Jy ! Component: 3650 - total flux cleaned = -0.000206095 Jy ! Component: 3700 - total flux cleaned = -0.000155956 Jy ! Component: 3750 - total flux cleaned = -0.000124647 Jy ! Component: 3800 - total flux cleaned = -9.33328e-05 Jy ! Component: 3850 - total flux cleaned = -3.70146e-05 Jy ! Component: 3900 - total flux cleaned = -3.07624e-05 Jy ! Component: 3950 - total flux cleaned = 1.3031e-05 Jy ! Component: 4000 - total flux cleaned = 3.80339e-05 Jy ! Component: 4050 - total flux cleaned = 7.56218e-05 Jy ! Total flux subtracted in 4096 components = 0.000100755 Jy ! Clean residual min=-0.000342 max=0.000452 Jy/beam ! Clean residual mean=0.000000 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.0306029 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 316 components and 0.0306029 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J0009+7603_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 12.39 at -1.011 degrees (North through East) ! Clean map min=-0.0025013 max=0.031368 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J0009+7603_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0313678 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000109332 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04565 1.04565 2.09129 4.18259 8.36517 16.7303 33.4607 66.9214 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.031 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J0009+7603_S_uvs.log closed on Sun Oct 6 10:30:15 2013