! Started logfile: J2356+8152_S_2006_02_16_yyk_uvs.log on Wed Jul 5 14:14:21 2006 obs J2356+8152_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2356+8152_S_2006_02_16_yyk_uva.fits ! AN table 1: 881 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980149 visibilities/baseline/integration-bin. ! Found source: J2356+8152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 155432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2356+8152_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.451033 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=10.31 mas, bpa=-5.638 degrees ! Estimated noise=1.16638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.368805 Jy ! Component: 100 - total flux cleaned = 0.424639 Jy ! Total flux subtracted in 100 components = 0.424639 Jy ! Clean residual min=-0.017756 max=0.036707 Jy/beam ! Clean residual mean=-0.000080 rms=0.006502 Jy/beam ! Combined flux in latest and established models = 0.424639 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.424639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109097Jy sigma=1.823360 ! Fit after self-cal, rms=0.109005Jy sigma=1.821695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=10.92 mas, bpa=-4.361 degrees ! Estimated noise=0.722622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349362 Jy ! Component: 100 - total flux cleaned = 0.0408784 Jy ! Component: 150 - total flux cleaned = 0.0430054 Jy ! Component: 200 - total flux cleaned = 0.0437966 Jy ! Total flux subtracted in 200 components = 0.0437966 Jy ! Clean residual min=-0.011536 max=0.022807 Jy/beam ! Clean residual mean=-0.000219 rms=0.003737 Jy/beam ! Combined flux in latest and established models = 0.468436 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 51 components and 0.468436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098200Jy sigma=1.617692 ! Fit after self-cal, rms=0.097468Jy sigma=1.605403 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 10.92 at -4.361 degrees (North through East) ! Clean map min=-0.011655 max=0.42247 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02478 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 0.96 KP 0.94 ! LA 1.18 MK 0.90 NL 1.04 OV 0.94 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994359 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.99 KP 0.95 ! LA 1.15 MK 0.96 NL 1.12 OV 0.96 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.972695 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.03 KP 0.97 ! LA 0.91 MK 1.10 NL 1.20 OV 1.02 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02469 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.94 KP 0.88 ! LA 0.78 MK 1.08 NL 1.17 OV 0.85 ! PT 0.92 SC 1.13 ! ! ! Fit before self-cal, rms=0.097468Jy sigma=1.605403 ! Fit after self-cal, rms=0.080271Jy sigma=1.333922 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080271Jy sigma=1.333922 ! Fit after self-cal, rms=0.080322Jy sigma=1.334462 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=10.74 mas, bpa=-4.319 degrees ! Estimated noise=0.721198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155723 Jy ! Component: 100 - total flux cleaned = 0.00196466 Jy ! Component: 150 - total flux cleaned = 0.00210329 Jy ! Component: 200 - total flux cleaned = 0.002222 Jy ! Total flux subtracted in 200 components = 0.002222 Jy ! Clean residual min=-0.006228 max=0.005287 Jy/beam ! Clean residual mean=0.000008 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.470658 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 81 components and 0.470658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079543Jy sigma=1.320088 ! Fit after self-cal, rms=0.079576Jy sigma=1.320295 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079576Jy sigma=1.320295 ! Fit after self-cal, rms=0.064597Jy sigma=1.069327 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180504 Jy ! Component: 100 - total flux cleaned = 0.00203641 Jy ! Component: 150 - total flux cleaned = 0.00195401 Jy ! Component: 200 - total flux cleaned = 0.00187996 Jy ! Total flux subtracted in 200 components = 0.00187996 Jy ! Clean residual min=-0.005680 max=0.005428 Jy/beam ! Clean residual mean=0.000001 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.472538 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 115 components and 0.472538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064337Jy sigma=1.064427 ! Fit after self-cal, rms=0.063912Jy sigma=1.058748 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 10.74 at -4.319 degrees (North through East) ! Clean map min=-0.0063434 max=0.426 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063912Jy sigma=1.058748 ! Fit after self-cal, rms=0.060271Jy sigma=0.988239 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060271Jy sigma=0.988239 ! Fit after self-cal, rms=0.060232Jy sigma=0.987789 ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=10.72 mas, bpa=-4.3 degrees ! Estimated noise=0.72035 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142131 Jy ! Component: 100 - total flux cleaned = -0.000891516 Jy ! Component: 150 - total flux cleaned = -0.000732237 Jy ! Component: 200 - total flux cleaned = -0.000667536 Jy ! Total flux subtracted in 200 components = -0.000667536 Jy ! Clean residual min=-0.004637 max=0.003596 Jy/beam ! Clean residual mean=-0.000001 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.47187 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 138 components and 0.47187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059913Jy sigma=0.982266 ! Fit after self-cal, rms=0.059891Jy sigma=0.982061 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059891Jy sigma=0.982061 ! Fit after self-cal, rms=0.058432Jy sigma=0.942210 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058432Jy sigma=0.942210 ! Fit after self-cal, rms=0.058435Jy sigma=0.942192 ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=10.7 mas, bpa=-4.272 degrees ! Estimated noise=0.719646 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100346 Jy ! Component: 100 - total flux cleaned = -0.000762604 Jy ! Component: 150 - total flux cleaned = -0.000521654 Jy ! Component: 200 - total flux cleaned = -0.000472664 Jy ! Total flux subtracted in 200 components = -0.000472664 Jy ! Clean residual min=-0.003869 max=0.003122 Jy/beam ! Clean residual mean=-0.000008 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.471397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 148 components and 0.471397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058259Jy sigma=0.938906 ! Fit after self-cal, rms=0.058247Jy sigma=0.938805 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.604 mas, bmaj=12.16 mas, bpa=-1.138 degrees ! Estimated noise=0.909771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000554167 Jy ! Component: 100 - total flux cleaned = -0.000487932 Jy ! Component: 150 - total flux cleaned = -0.000536506 Jy ! Component: 200 - total flux cleaned = -0.000616708 Jy ! Total flux subtracted in 200 components = -0.000616708 Jy ! Clean residual min=-0.003288 max=0.003355 Jy/beam ! Clean residual mean=-0.000009 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.470781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 162 components and 0.470781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058283Jy sigma=0.939280 ! Fit after self-cal, rms=0.058285Jy sigma=0.939202 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=10.16 mas, bpa=-5.87 degrees ! Estimated noise=1.16076 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.369424 Jy ! Component: 100 - total flux cleaned = 0.42267 Jy ! Component: 150 - total flux cleaned = 0.442817 Jy ! Component: 200 - total flux cleaned = 0.453551 Jy ! Total flux subtracted in 200 components = 0.453552 Jy ! Clean residual min=-0.005933 max=0.005648 Jy/beam ! Clean residual mean=-0.000033 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.453551 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.453551 Jy ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=10.7 mas, bpa=-4.272 degrees ! Estimated noise=0.719646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00964968 Jy ! Component: 100 - total flux cleaned = 0.0126129 Jy ! Component: 150 - total flux cleaned = 0.0142576 Jy ! Component: 200 - total flux cleaned = 0.0149015 Jy ! Total flux subtracted in 200 components = 0.0149015 Jy ! Clean residual min=-0.004285 max=0.003943 Jy/beam ! Clean residual mean=-0.000021 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.468453 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 81 components and 0.468453 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.604 mas, bmaj=12.16 mas, bpa=-1.138 degrees ! Estimated noise=0.909771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217762 Jy ! Component: 100 - total flux cleaned = 0.00252158 Jy ! Component: 150 - total flux cleaned = 0.00261028 Jy ! Component: 200 - total flux cleaned = 0.00268095 Jy ! Total flux subtracted in 200 components = 0.00268095 Jy ! Clean residual min=-0.003845 max=0.003425 Jy/beam ! Clean residual mean=-0.000023 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.471134 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 120 components and 0.471134 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=10.7 mas, bpa=-4.272 degrees ! Estimated noise=0.719646 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337957 Jy ! Component: 100 - total flux cleaned = -0.000341008 Jy ! Component: 150 - total flux cleaned = -0.000402731 Jy ! Component: 200 - total flux cleaned = -0.000400355 Jy ! Total flux subtracted in 200 components = -0.000400355 Jy ! Clean residual min=-0.003396 max=0.003444 Jy/beam ! Clean residual mean=-0.000007 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.470733 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 167 components and 0.470733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058358Jy sigma=0.938992 ! Fit after self-cal, rms=0.058336Jy sigma=0.938802 wmodel J2356+8152_S_2006_02_16_yyk\_map.mod ! Writing 167 model components to file: J2356+8152_S_2006_02_16_yyk_map.mod wobs J2356+8152_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2356+8152_S_2006_02_16_yyk_uvs.fits wwins J2356+8152_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J2356+8152_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167374 Jy ! Component: 100 - total flux cleaned = 0.000383072 Jy ! Component: 150 - total flux cleaned = 0.000333288 Jy ! Component: 200 - total flux cleaned = 0.000376037 Jy ! Component: 250 - total flux cleaned = 0.000379637 Jy ! Component: 300 - total flux cleaned = 0.000340717 Jy ! Component: 350 - total flux cleaned = 0.000264837 Jy ! Component: 400 - total flux cleaned = 0.00015838 Jy ! Component: 450 - total flux cleaned = 9.07923e-05 Jy ! Component: 500 - total flux cleaned = 9.11012e-05 Jy ! Component: 550 - total flux cleaned = 0.000154236 Jy ! Component: 600 - total flux cleaned = 0.000275445 Jy ! Component: 650 - total flux cleaned = 0.00033446 Jy ! Component: 700 - total flux cleaned = 0.000334507 Jy ! Component: 750 - total flux cleaned = 0.000334771 Jy ! Component: 800 - total flux cleaned = 0.00028142 Jy ! Component: 850 - total flux cleaned = 0.000255224 Jy ! Component: 900 - total flux cleaned = 0.000127221 Jy ! Component: 950 - total flux cleaned = 2.73002e-05 Jy ! Component: 1000 - total flux cleaned = -9.45053e-05 Jy ! Component: 1050 - total flux cleaned = -0.000213483 Jy ! Component: 1100 - total flux cleaned = -0.000353116 Jy ! Component: 1150 - total flux cleaned = -0.000490294 Jy ! Component: 1200 - total flux cleaned = -0.000692268 Jy ! Component: 1250 - total flux cleaned = -0.000933402 Jy ! Component: 1300 - total flux cleaned = -0.00108413 Jy ! Component: 1350 - total flux cleaned = -0.00127464 Jy ! Component: 1400 - total flux cleaned = -0.00146184 Jy ! Component: 1450 - total flux cleaned = -0.00160473 Jy ! Component: 1500 - total flux cleaned = -0.00178572 Jy ! Component: 1550 - total flux cleaned = -0.00194373 Jy ! Component: 1600 - total flux cleaned = -0.00206056 Jy ! Component: 1650 - total flux cleaned = -0.00223291 Jy ! Component: 1700 - total flux cleaned = -0.00232707 Jy ! Component: 1750 - total flux cleaned = -0.00241989 Jy ! Component: 1800 - total flux cleaned = -0.00251112 Jy ! Component: 1850 - total flux cleaned = -0.00258312 Jy ! Component: 1900 - total flux cleaned = -0.00270757 Jy ! Component: 1950 - total flux cleaned = -0.00277749 Jy ! Component: 2000 - total flux cleaned = -0.00289875 Jy ! Total flux subtracted in 2048 components = -0.00303521 Jy ! Clean residual min=-0.001010 max=0.000943 Jy/beam ! Clean residual mean=-0.000005 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.467698 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 320 components and 0.467698 Jy ![Exited script file: muppet] wmap "J2356+8152_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 10.7 at -4.272 degrees (North through East) ! Clean map min=-0.004281 max=0.42648 Jy/beam ! Writing clean map to FITS file: J2356+8152_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.426478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353445 device "J2356+8152_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2356+8152_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.248626 0.248626 0.497252 0.994504 1.98901 3.97801 7.95603 15.9121 31.8241 63.6482 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.426 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 10.7 at -4.272 degrees (North through East) ! Clean map min=-0.004281 max=0.42648 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2356+8152_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2356+8152_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2356+8152_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 14:14:58 2006