! Started logfile: J2325+7917_S_2006_02_16_yyk_uvs.log on Wed Jul  5 14:09:03 2006
obs J2325+7917_S_2006_02_16_yyk_uva.fits
! Reading UV FITS file: J2325+7917_S_2006_02_16_yyk_uva.fits
! AN table 1: 877 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.927531 visibilities/baseline/integration-bin.
! Found source: J2325+7917
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2421 lines of history.
! 
! Reading 146420 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2325+7917_S_2006_02_16_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.414101 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=10.61 mas, bpa=-2.103 degrees
! Estimated noise=1.33884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.260497 Jy
! Component: 100  -  total flux cleaned = 0.375092 Jy
! Total flux subtracted in 100 components = 0.375092 Jy
! Clean residual min=-0.025788 max=0.058243 Jy/beam
! Clean residual mean=0.000364 rms=0.011693 Jy/beam
! Combined flux in latest and established models = 0.375092 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.375092 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.190655Jy  sigma=3.481029
! Fit after  self-cal, rms=0.189704Jy  sigma=3.470647
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=10.61 mas, bpa=-2.103 degrees
! Estimated noise=1.33884 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.056 mas, bmaj=10.81 mas, bpa=-2.34 degrees
! Estimated noise=0.739533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.115057 Jy
! Component: 100  -  total flux cleaned = 0.162883 Jy
! Component: 150  -  total flux cleaned = 0.189008 Jy
! Component: 200  -  total flux cleaned = 0.204467 Jy
! Total flux subtracted in 200 components = 0.204467 Jy
! Clean residual min=-0.022986 max=0.074862 Jy/beam
! Clean residual mean=0.000794 rms=0.012136 Jy/beam
! Combined flux in latest and established models = 0.579559 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 39 components and 0.579559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139518Jy  sigma=2.485672
! Fit after  self-cal, rms=0.139174Jy  sigma=2.481227
! Inverting map 
! Added new window around map position (-18.5, 5.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725922 Jy
! Component: 100  -  total flux cleaned = 0.0996316 Jy
! Component: 150  -  total flux cleaned = 0.113356 Jy
! Component: 200  -  total flux cleaned = 0.120036 Jy
! Total flux subtracted in 200 components = 0.120036 Jy
! Clean residual min=-0.018890 max=0.034646 Jy/beam
! Clean residual mean=0.000259 rms=0.006987 Jy/beam
! Combined flux in latest and established models = 0.699595 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 81 components and 0.699595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111749Jy  sigma=1.910741
! Fit after  self-cal, rms=0.108183Jy  sigma=1.831173
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.056 x 10.81 at -2.34 degrees (North through East)
! Clean map  min=-0.017292  max=0.34639 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01053
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.93     HN        0.95     KP        0.93     
!   LA        1.09     MK        1.07     NL        1.21     OV        0.93     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.976672
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.95     KP        0.95     
!   LA        1.07     MK        1.16     NL        1.25     OV        0.95     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.935276
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.96     KP        0.98     
!   LA        0.85     MK        1.33     NL        1.38     OV        0.99     
!   PT        1.01     SC        1.11     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.990967
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.87     KP        0.90     
!   LA        0.74     MK        1.24     NL        1.28     OV        0.86     
!   PT        0.87     SC        1.25     
! 
! 
! Fit before self-cal, rms=0.108183Jy  sigma=1.831173
! Fit after  self-cal, rms=0.083413Jy  sigma=1.488448
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083413Jy  sigma=1.488448
! Fit after  self-cal, rms=0.083471Jy  sigma=1.488456
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.341 mas, bmaj=10.49 mas, bpa=-3.681 degrees
! Estimated noise=0.721566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.016684 Jy
! Component: 100  -  total flux cleaned = -0.0151708 Jy
! Component: 150  -  total flux cleaned = -0.0147991 Jy
! Component: 200  -  total flux cleaned = -0.0142614 Jy
! Total flux subtracted in 200 components = -0.0142614 Jy
! Clean residual min=-0.009034 max=0.009706 Jy/beam
! Clean residual mean=0.000022 rms=0.002524 Jy/beam
! Combined flux in latest and established models = 0.685333 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 110 components and 0.685334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077293Jy  sigma=1.356640
! Fit after  self-cal, rms=0.076908Jy  sigma=1.349373
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076908Jy  sigma=1.349373
! Fit after  self-cal, rms=0.068539Jy  sigma=1.195148
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00483558 Jy
! Component: 100  -  total flux cleaned = 0.00541737 Jy
! Component: 150  -  total flux cleaned = 0.00608221 Jy
! Component: 200  -  total flux cleaned = 0.00650747 Jy
! Total flux subtracted in 200 components = 0.00650747 Jy
! Clean residual min=-0.008263 max=0.007392 Jy/beam
! Clean residual mean=-0.000030 rms=0.002151 Jy/beam
! Combined flux in latest and established models = 0.691841 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 141 components and 0.691841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067637Jy  sigma=1.178002
! Fit after  self-cal, rms=0.067338Jy  sigma=1.173111
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.341 x 10.49 at -3.681 degrees (North through East)
! Clean map  min=-0.0078566  max=0.34764 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067338Jy  sigma=1.173111
! Fit after  self-cal, rms=0.064049Jy  sigma=1.066291
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064049Jy  sigma=1.066291
! Fit after  self-cal, rms=0.064042Jy  sigma=1.066034
! Inverting map and beam 
! Estimated beam: bmin=3.373 mas, bmaj=10.54 mas, bpa=-3.475 degrees
! Estimated noise=0.725147 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00483778 Jy
! Component: 100  -  total flux cleaned = 0.00602804 Jy
! Component: 150  -  total flux cleaned = 0.00589723 Jy
! Component: 200  -  total flux cleaned = 0.00611123 Jy
! Total flux subtracted in 200 components = 0.00611123 Jy
! Clean residual min=-0.006912 max=0.005768 Jy/beam
! Clean residual mean=-0.000003 rms=0.001698 Jy/beam
! Combined flux in latest and established models = 0.697952 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 162 components and 0.697952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063412Jy  sigma=1.052973
! Fit after  self-cal, rms=0.063328Jy  sigma=1.051100
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063328Jy  sigma=1.051100
! Fit after  self-cal, rms=0.061112Jy  sigma=0.985452
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061112Jy  sigma=0.985452
! Fit after  self-cal, rms=0.061122Jy  sigma=0.985420
! Inverting map and beam 
! Estimated beam: bmin=3.376 mas, bmaj=10.54 mas, bpa=-3.424 degrees
! Estimated noise=0.725604 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035144 Jy
! Component: 100  -  total flux cleaned = 0.0040517 Jy
! Component: 150  -  total flux cleaned = 0.00414192 Jy
! Component: 200  -  total flux cleaned = 0.00414195 Jy
! Total flux subtracted in 200 components = 0.00414195 Jy
! Clean residual min=-0.006505 max=0.005118 Jy/beam
! Clean residual mean=-0.000000 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.702094 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 174 components and 0.702094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060789Jy  sigma=0.978527
! Fit after  self-cal, rms=0.060761Jy  sigma=0.977725
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.97 mas, bmaj=12.04 mas, bpa=2.286 degrees
! Estimated noise=0.899376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291546 Jy
! Component: 100  -  total flux cleaned = 0.0034219 Jy
! Component: 150  -  total flux cleaned = 0.00334103 Jy
! Component: 200  -  total flux cleaned = 0.00318622 Jy
! Total flux subtracted in 200 components = 0.00318622 Jy
! Clean residual min=-0.008304 max=0.006493 Jy/beam
! Clean residual mean=-0.000055 rms=0.002175 Jy/beam
! Combined flux in latest and established models = 0.70528 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 182 components and 0.70528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060772Jy  sigma=0.976806
! Fit after  self-cal, rms=0.060771Jy  sigma=0.976419
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.393 mas, bmaj=10.33 mas, bpa=-2.645 degrees
! Estimated noise=1.36771 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.264282 Jy
! Component: 100  -  total flux cleaned = 0.377877 Jy
! Component: 150  -  total flux cleaned = 0.448483 Jy
! Component: 200  -  total flux cleaned = 0.496712 Jy
! Total flux subtracted in 200 components = 0.496712 Jy
! Clean residual min=-0.014829 max=0.026020 Jy/beam
! Clean residual mean=0.000193 rms=0.005720 Jy/beam
! Combined flux in latest and established models = 0.496712 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.496712 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.376 mas, bmaj=10.54 mas, bpa=-3.424 degrees
! Estimated noise=0.725604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0652975 Jy
! Component: 100  -  total flux cleaned = 0.10515 Jy
! Component: 150  -  total flux cleaned = 0.131648 Jy
! Component: 200  -  total flux cleaned = 0.150309 Jy
! Total flux subtracted in 200 components = 0.150309 Jy
! Clean residual min=-0.007689 max=0.011515 Jy/beam
! Clean residual mean=0.000174 rms=0.003269 Jy/beam
! Combined flux in latest and established models = 0.647021 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 89 components and 0.647021 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.97 mas, bmaj=12.04 mas, bpa=2.286 degrees
! Estimated noise=0.899376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223431 Jy
! Component: 100  -  total flux cleaned = 0.0356507 Jy
! Component: 150  -  total flux cleaned = 0.0441699 Jy
! Component: 200  -  total flux cleaned = 0.0493523 Jy
! Total flux subtracted in 200 components = 0.0493523 Jy
! Clean residual min=-0.007969 max=0.007326 Jy/beam
! Clean residual mean=-0.000019 rms=0.002415 Jy/beam
! Combined flux in latest and established models = 0.696374 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 141 components and 0.696374 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.376 mas, bmaj=10.54 mas, bpa=-3.424 degrees
! Estimated noise=0.725604 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147165 Jy
! Component: 100  -  total flux cleaned = 0.000823632 Jy
! Component: 150  -  total flux cleaned = 0.0015369 Jy
! Component: 200  -  total flux cleaned = 0.0020423 Jy
! Total flux subtracted in 200 components = 0.0020423 Jy
! Clean residual min=-0.006060 max=0.006288 Jy/beam
! Clean residual mean=-0.000003 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.698416 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 161 components and 0.698416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061612Jy  sigma=0.987089
! Fit after  self-cal, rms=0.061604Jy  sigma=0.986447
wmodel J2325+7917_S_2006_02_16_yyk\_map.mod
! Writing 161 model components to file: J2325+7917_S_2006_02_16_yyk_map.mod
wobs J2325+7917_S_2006_02_16_yyk\_uvs.fits
! Writing UV FITS file: J2325+7917_S_2006_02_16_yyk_uvs.fits
wwins J2325+7917_S_2006_02_16_yyk\_map.win
! wwins: Wrote 2 windows to J2325+7917_S_2006_02_16_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565864 Jy
! Component: 100  -  total flux cleaned = 0.00137804 Jy
! Component: 150  -  total flux cleaned = 0.0017101 Jy
! Component: 200  -  total flux cleaned = 0.00163477 Jy
! Component: 250  -  total flux cleaned = 0.00177122 Jy
! Component: 300  -  total flux cleaned = 0.00196799 Jy
! Component: 350  -  total flux cleaned = 0.00240642 Jy
! Component: 400  -  total flux cleaned = 0.00300249 Jy
! Component: 450  -  total flux cleaned = 0.00351455 Jy
! Component: 500  -  total flux cleaned = 0.00367726 Jy
! Component: 550  -  total flux cleaned = 0.00383467 Jy
! Component: 600  -  total flux cleaned = 0.00403853 Jy
! Component: 650  -  total flux cleaned = 0.0042358 Jy
! Component: 700  -  total flux cleaned = 0.00428333 Jy
! Component: 750  -  total flux cleaned = 0.00446838 Jy
! Component: 800  -  total flux cleaned = 0.00455805 Jy
! Component: 850  -  total flux cleaned = 0.00468923 Jy
! Component: 900  -  total flux cleaned = 0.00486012 Jy
! Component: 950  -  total flux cleaned = 0.00486103 Jy
! Component: 1000  -  total flux cleaned = 0.00498264 Jy
! Component: 1050  -  total flux cleaned = 0.00498195 Jy
! Component: 1100  -  total flux cleaned = 0.00498179 Jy
! Component: 1150  -  total flux cleaned = 0.00498218 Jy
! Component: 1200  -  total flux cleaned = 0.00509366 Jy
! Component: 1250  -  total flux cleaned = 0.0051308 Jy
! Component: 1300  -  total flux cleaned = 0.00527312 Jy
! Component: 1350  -  total flux cleaned = 0.00530758 Jy
! Component: 1400  -  total flux cleaned = 0.00534136 Jy
! Component: 1450  -  total flux cleaned = 0.00544278 Jy
! Component: 1500  -  total flux cleaned = 0.0054753 Jy
! Component: 1550  -  total flux cleaned = 0.00563583 Jy
! Component: 1600  -  total flux cleaned = 0.00573074 Jy
! Component: 1650  -  total flux cleaned = 0.00582375 Jy
! Component: 1700  -  total flux cleaned = 0.00594629 Jy
! Component: 1750  -  total flux cleaned = 0.00600603 Jy
! Component: 1800  -  total flux cleaned = 0.0060362 Jy
! Component: 1850  -  total flux cleaned = 0.00618083 Jy
! Component: 1900  -  total flux cleaned = 0.00626569 Jy
! Component: 1950  -  total flux cleaned = 0.00623808 Jy
! Component: 2000  -  total flux cleaned = 0.00634899 Jy
! Total flux subtracted in 2048 components = 0.00640317 Jy
! Clean residual min=-0.001565 max=0.001417 Jy/beam
! Clean residual mean=-0.000015 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.704819 Jy
keep
! Adding 209 model components to the UV plane model.
! The established model now contains 370 components and 0.704819 Jy
![Exited script file: muppet]
wmap "J2325+7917_S_2006_02_16_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.376 x 10.54 at -3.424 degrees (North through East)
! Clean map  min=-0.004234  max=0.34944 Jy/beam
! Writing clean map to FITS file: J2325+7917_S_2006_02_16_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.349437 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000550792 
device "J2325+7917_S_2006_02_16_yyk\_map.eps/VPS"
! Attempting to open device: 'J2325+7917_S_2006_02_16_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.472868 0.472868 0.945737 1.89147 3.78295 7.56589 15.1318 30.2636 60.5271
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.349 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.376 x 10.54 at -3.424 degrees (North through East)
! Clean map  min=-0.004234  max=0.34944 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2325+7917_S_2006_02_16_yyk\_map.gif/gif"
! Attempting to open device: 'J2325+7917_S_2006_02_16_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2325+7917_S_2006_02_16_yyk_uvs.log closed on Wed Jul  5 14:09:34 2006