! Started logfile: J2203+3145_X_2006_02_16_yyk_uvs.log on Wed Jul 5 14:04:19 2006 obs J2203+3145_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2203+3145_X_2006_02_16_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856773 visibilities/baseline/integration-bin. ! Found source: J2203+3145 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 22516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2203+3145_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.77434 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7823 mas, bmaj=2.086 mas, bpa=18 degrees ! Estimated noise=2.2246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.4656 Jy ! Component: 100 - total flux cleaned = 1.75929 Jy ! Total flux subtracted in 100 components = 1.75929 Jy ! Clean residual min=-0.093915 max=0.190426 Jy/beam ! Clean residual mean=0.000321 rms=0.029546 Jy/beam ! Combined flux in latest and established models = 1.75929 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.75929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378287Jy sigma=6.489933 ! Fit after self-cal, rms=0.377947Jy sigma=6.481937 ! Inverting map ! Added new window around map position (-2, -0.4). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.195806 Jy ! Component: 100 - total flux cleaned = 0.294758 Jy ! Total flux subtracted in 100 components = 0.294758 Jy ! Clean residual min=-0.102333 max=0.126204 Jy/beam ! Clean residual mean=0.000149 rms=0.020730 Jy/beam ! Combined flux in latest and established models = 2.05405 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 2.05405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289152Jy sigma=4.766240 ! Fit after self-cal, rms=0.277240Jy sigma=4.545435 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.949 mas, bmaj=2.242 mas, bpa=16.36 degrees ! Estimated noise=1.79793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105749 Jy ! Component: 100 - total flux cleaned = 0.163798 Jy ! Component: 150 - total flux cleaned = 0.200912 Jy ! Component: 200 - total flux cleaned = 0.211692 Jy ! Total flux subtracted in 200 components = 0.211692 Jy ! Clean residual min=-0.079145 max=0.074852 Jy/beam ! Clean residual mean=0.000036 rms=0.017685 Jy/beam ! Combined flux in latest and established models = 2.26574 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 2.26574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246938Jy sigma=3.968230 ! Fit after self-cal, rms=0.245079Jy sigma=3.924599 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.949 x 2.242 at 16.36 degrees (North through East) ! Clean map min=-0.081393 max=1.635 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.986839 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.03 KP 0.96 ! LA 1.02 MK 0.99 NL 1.23 OV 0.94 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00284 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.02 KP 0.91 ! LA 0.97 MK 0.97 NL 1.19 OV 0.92 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992221 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.95 KP 0.84 ! LA 0.98 MK 1.02 NL 1.20 OV 0.95 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.982793 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.97 KP 0.87 ! LA 0.97 MK 1.05 NL 1.15 OV 0.97 ! PT 1.13 SC 1.03 ! ! ! Fit before self-cal, rms=0.245079Jy sigma=3.924599 ! Fit after self-cal, rms=0.183519Jy sigma=2.824370 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183519Jy sigma=2.824370 ! Fit after self-cal, rms=0.183595Jy sigma=2.823798 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9516 mas, bmaj=2.251 mas, bpa=16.52 degrees ! Estimated noise=1.78748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0432895 Jy ! Component: 100 - total flux cleaned = -0.0608988 Jy ! Component: 150 - total flux cleaned = -0.0653287 Jy ! Component: 200 - total flux cleaned = -0.0676408 Jy ! Total flux subtracted in 200 components = -0.0676408 Jy ! Clean residual min=-0.035831 max=0.040096 Jy/beam ! Clean residual mean=-0.000155 rms=0.009122 Jy/beam ! Combined flux in latest and established models = 2.1981 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 2.1981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175545Jy sigma=2.675880 ! Fit after self-cal, rms=0.173664Jy sigma=2.657640 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173664Jy sigma=2.657640 ! Fit after self-cal, rms=0.135986Jy sigma=2.035389 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00701744 Jy ! Component: 100 - total flux cleaned = -0.0057279 Jy ! Component: 150 - total flux cleaned = -0.00610268 Jy ! Component: 200 - total flux cleaned = -0.00642157 Jy ! Total flux subtracted in 200 components = -0.00642157 Jy ! Clean residual min=-0.032617 max=0.036977 Jy/beam ! Clean residual mean=-0.000154 rms=0.008760 Jy/beam ! Combined flux in latest and established models = 2.19168 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 2.19168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133874Jy sigma=2.000076 ! Fit after self-cal, rms=0.130903Jy sigma=1.946086 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9516 x 2.251 at 16.52 degrees (North through East) ! Clean map min=-0.031855 max=1.6466 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130903Jy sigma=1.946086 ! Fit after self-cal, rms=0.124502Jy sigma=1.822622 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124502Jy sigma=1.822622 ! Fit after self-cal, rms=0.124471Jy sigma=1.819103 ! Inverting map and beam ! Estimated beam: bmin=0.9502 mas, bmaj=2.252 mas, bpa=16.61 degrees ! Estimated noise=1.79392 mJy/beam. ! Added new window around map position (-17.2, 17.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321229 Jy ! Component: 100 - total flux cleaned = 0.0464623 Jy ! Component: 150 - total flux cleaned = 0.05132 Jy ! Component: 200 - total flux cleaned = 0.0531198 Jy ! Total flux subtracted in 200 components = 0.0531198 Jy ! Clean residual min=-0.027482 max=0.025836 Jy/beam ! Clean residual mean=-0.000112 rms=0.006347 Jy/beam ! Combined flux in latest and established models = 2.2448 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 93 components and 2.2448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112618Jy sigma=1.576420 ! Fit after self-cal, rms=0.112068Jy sigma=1.571775 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112068Jy sigma=1.571775 ! Fit after self-cal, rms=0.111203Jy sigma=1.545783 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111203Jy sigma=1.545783 ! Fit after self-cal, rms=0.111211Jy sigma=1.545755 ! Inverting map and beam ! Estimated beam: bmin=0.9495 mas, bmaj=2.252 mas, bpa=16.6 degrees ! Estimated noise=1.79072 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00508045 Jy ! Component: 100 - total flux cleaned = -0.00346982 Jy ! Component: 150 - total flux cleaned = -0.0029731 Jy ! Component: 200 - total flux cleaned = -0.00255141 Jy ! Total flux subtracted in 200 components = -0.00255141 Jy ! Clean residual min=-0.023793 max=0.023410 Jy/beam ! Clean residual mean=-0.000063 rms=0.005642 Jy/beam ! Combined flux in latest and established models = 2.24225 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 105 components and 2.24225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106642Jy sigma=1.466887 ! Fit after self-cal, rms=0.106086Jy sigma=1.462945 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=2.864 mas, bpa=10.99 degrees ! Estimated noise=2.28899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605216 Jy ! Component: 100 - total flux cleaned = -0.00163691 Jy ! Component: 150 - total flux cleaned = -0.00308009 Jy ! Component: 200 - total flux cleaned = -0.00402571 Jy ! Total flux subtracted in 200 components = -0.00402571 Jy ! Clean residual min=-0.028785 max=0.020915 Jy/beam ! Clean residual mean=-0.000103 rms=0.007046 Jy/beam ! Combined flux in latest and established models = 2.23822 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 2.23822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105633Jy sigma=1.449715 ! Fit after self-cal, rms=0.105099Jy sigma=1.444231 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7795 mas, bmaj=2.084 mas, bpa=18.1 degrees ! Estimated noise=2.22788 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.46964 Jy ! Component: 100 - total flux cleaned = 1.77473 Jy ! Component: 150 - total flux cleaned = 1.91256 Jy ! Component: 200 - total flux cleaned = 1.98961 Jy ! Total flux subtracted in 200 components = 1.98961 Jy ! Clean residual min=-0.034492 max=0.047557 Jy/beam ! Clean residual mean=0.000036 rms=0.010135 Jy/beam ! Combined flux in latest and established models = 1.98961 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 1.98961 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9495 mas, bmaj=2.252 mas, bpa=16.6 degrees ! Estimated noise=1.79072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, -3.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805451 Jy ! Component: 100 - total flux cleaned = 0.129065 Jy ! Component: 150 - total flux cleaned = 0.16243 Jy ! Component: 200 - total flux cleaned = 0.187286 Jy ! Total flux subtracted in 200 components = 0.187286 Jy ! Clean residual min=-0.021512 max=0.019730 Jy/beam ! Clean residual mean=-0.000024 rms=0.005843 Jy/beam ! Combined flux in latest and established models = 2.1769 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 72 components and 2.1769 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=2.864 mas, bpa=10.99 degrees ! Estimated noise=2.28899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316636 Jy ! Component: 100 - total flux cleaned = 0.0479308 Jy ! Component: 150 - total flux cleaned = 0.0512325 Jy ! Component: 200 - total flux cleaned = 0.0550456 Jy ! Total flux subtracted in 200 components = 0.0550456 Jy ! Clean residual min=-0.023951 max=0.019537 Jy/beam ! Clean residual mean=-0.000031 rms=0.006096 Jy/beam ! Combined flux in latest and established models = 2.23194 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 121 components and 2.23194 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9495 mas, bmaj=2.252 mas, bpa=16.6 degrees ! Estimated noise=1.79072 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315614 Jy ! Component: 100 - total flux cleaned = 0.00477471 Jy ! Component: 150 - total flux cleaned = 0.0059016 Jy ! Component: 200 - total flux cleaned = 0.0069228 Jy ! Total flux subtracted in 200 components = 0.0069228 Jy ! Clean residual min=-0.017434 max=0.015504 Jy/beam ! Clean residual mean=0.000025 rms=0.004291 Jy/beam ! Combined flux in latest and established models = 2.23886 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 2.23887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094934Jy sigma=1.256982 ! Fit after self-cal, rms=0.093286Jy sigma=1.227407 wmodel J2203+3145_X_2006_02_16_yyk\_map.mod ! Writing 146 model components to file: J2203+3145_X_2006_02_16_yyk_map.mod wobs J2203+3145_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2203+3145_X_2006_02_16_yyk_uvs.fits wwins J2203+3145_X_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J2203+3145_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00606162 Jy ! Component: 100 - total flux cleaned = -0.00976608 Jy ! Component: 150 - total flux cleaned = -0.0121993 Jy ! Component: 200 - total flux cleaned = -0.014956 Jy ! Component: 250 - total flux cleaned = -0.0173404 Jy ! Component: 300 - total flux cleaned = -0.0198016 Jy ! Component: 350 - total flux cleaned = -0.0217477 Jy ! Component: 400 - total flux cleaned = -0.023796 Jy ! Component: 450 - total flux cleaned = -0.025928 Jy ! Component: 500 - total flux cleaned = -0.027966 Jy ! Component: 550 - total flux cleaned = -0.0297555 Jy ! Component: 600 - total flux cleaned = -0.0316201 Jy ! Component: 650 - total flux cleaned = -0.0332612 Jy ! Component: 700 - total flux cleaned = -0.0345585 Jy ! Component: 750 - total flux cleaned = -0.0358078 Jy ! Component: 800 - total flux cleaned = -0.0366107 Jy ! Component: 850 - total flux cleaned = -0.0373891 Jy ! Component: 900 - total flux cleaned = -0.0380222 Jy ! Component: 950 - total flux cleaned = -0.0388848 Jy ! Component: 1000 - total flux cleaned = -0.0394852 Jy ! Component: 1050 - total flux cleaned = -0.0401848 Jy ! Component: 1100 - total flux cleaned = -0.040525 Jy ! Component: 1150 - total flux cleaned = -0.040747 Jy ! Component: 1200 - total flux cleaned = -0.0412898 Jy ! Component: 1250 - total flux cleaned = -0.0418201 Jy ! Component: 1300 - total flux cleaned = -0.0424391 Jy ! Component: 1350 - total flux cleaned = -0.0428424 Jy ! Component: 1400 - total flux cleaned = -0.0431372 Jy ! Component: 1450 - total flux cleaned = -0.0434277 Jy ! Component: 1500 - total flux cleaned = -0.0436162 Jy ! Component: 1550 - total flux cleaned = -0.0438973 Jy ! Component: 1600 - total flux cleaned = -0.0443559 Jy ! Component: 1650 - total flux cleaned = -0.0446259 Jy ! Component: 1700 - total flux cleaned = -0.0446263 Jy ! Component: 1750 - total flux cleaned = -0.0450602 Jy ! Component: 1800 - total flux cleaned = -0.0452294 Jy ! Component: 1850 - total flux cleaned = -0.0458106 Jy ! Component: 1900 - total flux cleaned = -0.0461363 Jy ! Component: 1950 - total flux cleaned = -0.0464567 Jy ! Component: 2000 - total flux cleaned = -0.0467728 Jy ! Total flux subtracted in 2048 components = -0.0470843 Jy ! Clean residual min=-0.003924 max=0.004312 Jy/beam ! Clean residual mean=0.000020 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 2.19178 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 276 components and 2.19178 Jy ![Exited script file: muppet] wmap "J2203+3145_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9495 x 2.252 at 16.6 degrees (North through East) ! Clean map min=-0.011825 max=1.6591 Jy/beam ! Writing clean map to FITS file: J2203+3145_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.65907 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00146339 device "J2203+3145_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2203+3145_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.264616 0.264616 0.529232 1.05846 2.11693 4.23386 8.46772 16.9354 33.8709 67.7417 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.659 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9495 x 2.252 at 16.6 degrees (North through East) ! Clean map min=-0.011825 max=1.6591 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2203+3145_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2203+3145_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2203+3145_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 14:04:49 2006