! Started logfile: J2203+3145_X_2006_02_14_yyk_uvs.log on Wed Jul 5 14:03:51 2006 obs J2203+3145_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J2203+3145_X_2006_02_14_yyk_uva.fits ! AN table 1: 233 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.552122 visibilities/baseline/integration-bin. ! Found source: J2203+3145 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 23156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2203+3145_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.95318 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7294 mas, bmaj=2.008 mas, bpa=17.75 degrees ! Estimated noise=2.40945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.64024 Jy ! Component: 100 - total flux cleaned = 1.97847 Jy ! Total flux subtracted in 100 components = 1.97847 Jy ! Clean residual min=-0.071674 max=0.102201 Jy/beam ! Clean residual mean=0.000270 rms=0.021669 Jy/beam ! Combined flux in latest and established models = 1.97847 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.97847 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.264033Jy sigma=4.398979 ! Fit after self-cal, rms=0.263745Jy sigma=4.387341 ! Inverting map and beam ! Estimated beam: bmin=0.7294 mas, bmaj=2.008 mas, bpa=17.75 degrees ! Estimated noise=2.40945 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8922 mas, bmaj=2.212 mas, bpa=13.52 degrees ! Estimated noise=1.80475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.176359 Jy ! Component: 100 - total flux cleaned = 0.260098 Jy ! Component: 150 - total flux cleaned = 0.307137 Jy ! Component: 200 - total flux cleaned = 0.335899 Jy ! Total flux subtracted in 200 components = 0.335899 Jy ! Clean residual min=-0.052561 max=0.054697 Jy/beam ! Clean residual mean=-0.000120 rms=0.013565 Jy/beam ! Combined flux in latest and established models = 2.31437 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 2.31437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179225Jy sigma=2.765483 ! Fit after self-cal, rms=0.179042Jy sigma=2.760711 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8922 x 2.212 at 13.52 degrees (North through East) ! Clean map min=-0.049254 max=1.9313 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.986798 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.05 KP 1.00 ! LA 1.03 MK 1.03 NL 1.02 OV 0.99 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01023 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.05 KP 0.93 ! LA 0.99 MK 1.00 NL 1.00 OV 0.97 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00592 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.95 KP 0.86 ! LA 1.00 MK 1.04 NL 0.99 OV 1.00 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.991463 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 1.00 KP 0.90 ! LA 0.99 MK 1.05 NL 1.00 OV 1.04 ! PT 1.00* SC 1.02 ! ! ! Fit before self-cal, rms=0.179042Jy sigma=2.760711 ! Fit after self-cal, rms=0.135386Jy sigma=2.074577 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135386Jy sigma=2.074577 ! Fit after self-cal, rms=0.135460Jy sigma=2.074468 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=2.234 mas, bpa=13.6 degrees ! Estimated noise=1.79699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, 19.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548331 Jy ! Component: 100 - total flux cleaned = 0.0690357 Jy ! Component: 150 - total flux cleaned = 0.0751863 Jy ! Component: 200 - total flux cleaned = 0.0780878 Jy ! Total flux subtracted in 200 components = 0.0780878 Jy ! Clean residual min=-0.015953 max=0.024451 Jy/beam ! Clean residual mean=-0.000018 rms=0.005111 Jy/beam ! Combined flux in latest and established models = 2.39246 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 66 components and 2.39246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119722Jy sigma=1.751428 ! Fit after self-cal, rms=0.119964Jy sigma=1.742452 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119964Jy sigma=1.742452 ! Fit after self-cal, rms=0.102082Jy sigma=1.436826 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -2.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226703 Jy ! Component: 100 - total flux cleaned = 0.0273119 Jy ! Component: 150 - total flux cleaned = 0.028678 Jy ! Component: 200 - total flux cleaned = 0.030533 Jy ! Total flux subtracted in 200 components = 0.030533 Jy ! Clean residual min=-0.011969 max=0.014466 Jy/beam ! Clean residual mean=-0.000012 rms=0.003464 Jy/beam ! Combined flux in latest and established models = 2.42299 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 97 components and 2.42299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096725Jy sigma=1.326752 ! Fit after self-cal, rms=0.093801Jy sigma=1.290441 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 2.234 at 13.6 degrees (North through East) ! Clean map min=-0.01185 max=1.9341 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093801Jy sigma=1.290441 ! Fit after self-cal, rms=0.086784Jy sigma=1.113175 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086784Jy sigma=1.113175 ! Fit after self-cal, rms=0.086380Jy sigma=1.108958 ! Inverting map and beam ! Estimated beam: bmin=0.9043 mas, bmaj=2.236 mas, bpa=13.65 degrees ! Estimated noise=1.79518 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556079 Jy ! Component: 100 - total flux cleaned = 0.0087617 Jy ! Component: 150 - total flux cleaned = 0.00932362 Jy ! Component: 200 - total flux cleaned = 0.00931331 Jy ! Total flux subtracted in 200 components = 0.00931331 Jy ! Clean residual min=-0.010589 max=0.011620 Jy/beam ! Clean residual mean=-0.000020 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 2.43231 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 119 components and 2.43231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084884Jy sigma=1.077525 ! Fit after self-cal, rms=0.084657Jy sigma=1.075003 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084657Jy sigma=1.075003 ! Fit after self-cal, rms=0.082718Jy sigma=1.047822 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082718Jy sigma=1.047822 ! Fit after self-cal, rms=0.082694Jy sigma=1.047706 ! Inverting map and beam ! Estimated beam: bmin=0.9044 mas, bmaj=2.237 mas, bpa=13.65 degrees ! Estimated noise=1.79464 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241632 Jy ! Component: 100 - total flux cleaned = 0.00314795 Jy ! Component: 150 - total flux cleaned = 0.00337022 Jy ! Component: 200 - total flux cleaned = 0.00376215 Jy ! Total flux subtracted in 200 components = 0.00376215 Jy ! Clean residual min=-0.009858 max=0.010982 Jy/beam ! Clean residual mean=-0.000027 rms=0.002733 Jy/beam ! Combined flux in latest and established models = 2.43607 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 2.43607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081771Jy sigma=1.029904 ! Fit after self-cal, rms=0.081673Jy sigma=1.028783 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.931 mas, bmaj=2.781 mas, bpa=8.24 degrees ! Estimated noise=2.32468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774375 Jy ! Component: 100 - total flux cleaned = 0.0123586 Jy ! Component: 150 - total flux cleaned = 0.0141146 Jy ! Component: 200 - total flux cleaned = 0.0153294 Jy ! Total flux subtracted in 200 components = 0.0153294 Jy ! Clean residual min=-0.009759 max=0.012366 Jy/beam ! Clean residual mean=-0.000068 rms=0.003002 Jy/beam ! Combined flux in latest and established models = 2.4514 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 152 components and 2.4514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081430Jy sigma=1.022233 ! Fit after self-cal, rms=0.081313Jy sigma=1.020752 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7322 mas, bmaj=2.017 mas, bpa=17.81 degrees ! Estimated noise=2.41003 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.64061 Jy ! Component: 100 - total flux cleaned = 1.96902 Jy ! Component: 150 - total flux cleaned = 2.10098 Jy ! Component: 200 - total flux cleaned = 2.17455 Jy ! Total flux subtracted in 200 components = 2.17455 Jy ! Clean residual min=-0.032677 max=0.031838 Jy/beam ! Clean residual mean=0.000100 rms=0.009606 Jy/beam ! Combined flux in latest and established models = 2.17455 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 2.17455 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9044 mas, bmaj=2.237 mas, bpa=13.65 degrees ! Estimated noise=1.79464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709761 Jy ! Component: 100 - total flux cleaned = 0.117186 Jy ! Component: 150 - total flux cleaned = 0.150073 Jy ! Component: 200 - total flux cleaned = 0.174463 Jy ! Total flux subtracted in 200 components = 0.174463 Jy ! Clean residual min=-0.014467 max=0.019260 Jy/beam ! Clean residual mean=0.000000 rms=0.004718 Jy/beam ! Combined flux in latest and established models = 2.34901 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 59 components and 2.34901 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.931 mas, bmaj=2.781 mas, bpa=8.24 degrees ! Estimated noise=2.32468 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288347 Jy ! Component: 100 - total flux cleaned = 0.0464243 Jy ! Component: 150 - total flux cleaned = 0.0583023 Jy ! Component: 200 - total flux cleaned = 0.0652951 Jy ! Total flux subtracted in 200 components = 0.0652951 Jy ! Clean residual min=-0.011694 max=0.013207 Jy/beam ! Clean residual mean=-0.000051 rms=0.003772 Jy/beam ! Combined flux in latest and established models = 2.41431 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 113 components and 2.41431 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9044 mas, bmaj=2.237 mas, bpa=13.65 degrees ! Estimated noise=1.79464 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247893 Jy ! Component: 100 - total flux cleaned = 0.006464 Jy ! Component: 150 - total flux cleaned = 0.00850098 Jy ! Component: 200 - total flux cleaned = 0.0118258 Jy ! Total flux subtracted in 200 components = 0.0118258 Jy ! Clean residual min=-0.010670 max=0.012396 Jy/beam ! Clean residual mean=-0.000027 rms=0.002806 Jy/beam ! Combined flux in latest and established models = 2.42613 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 2.42613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082906Jy sigma=1.045758 ! Fit after self-cal, rms=0.082890Jy sigma=1.041998 wmodel J2203+3145_X_2006_02_14_yyk\_map.mod ! Writing 141 model components to file: J2203+3145_X_2006_02_14_yyk_map.mod wobs J2203+3145_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J2203+3145_X_2006_02_14_yyk_uvs.fits wwins J2203+3145_X_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J2203+3145_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528913 Jy ! Component: 100 - total flux cleaned = 0.00528175 Jy ! Component: 150 - total flux cleaned = 0.00560399 Jy ! Component: 200 - total flux cleaned = 0.00560783 Jy ! Component: 250 - total flux cleaned = 0.00460908 Jy ! Component: 300 - total flux cleaned = 0.00353066 Jy ! Component: 350 - total flux cleaned = 0.00251287 Jy ! Component: 400 - total flux cleaned = 0.00190189 Jy ! Component: 450 - total flux cleaned = 0.00120422 Jy ! Component: 500 - total flux cleaned = 0.00120364 Jy ! Component: 550 - total flux cleaned = 0.0005635 Jy ! Component: 600 - total flux cleaned = 0.000153749 Jy ! Component: 650 - total flux cleaned = -0.000736459 Jy ! Component: 700 - total flux cleaned = -0.00140572 Jy ! Component: 750 - total flux cleaned = -0.00223869 Jy ! Component: 800 - total flux cleaned = -0.00268339 Jy ! Component: 850 - total flux cleaned = -0.00346179 Jy ! Component: 900 - total flux cleaned = -0.00379786 Jy ! Component: 950 - total flux cleaned = -0.00428903 Jy ! Component: 1000 - total flux cleaned = -0.00492634 Jy ! Component: 1050 - total flux cleaned = -0.00562565 Jy ! Component: 1100 - total flux cleaned = -0.00608005 Jy ! Component: 1150 - total flux cleaned = -0.00667249 Jy ! Component: 1200 - total flux cleaned = -0.00739821 Jy ! Component: 1250 - total flux cleaned = -0.00789609 Jy ! Component: 1300 - total flux cleaned = -0.00873014 Jy ! Component: 1350 - total flux cleaned = -0.00940708 Jy ! Component: 1400 - total flux cleaned = -0.00993881 Jy ! Component: 1450 - total flux cleaned = -0.0105898 Jy ! Component: 1500 - total flux cleaned = -0.0113553 Jy ! Component: 1550 - total flux cleaned = -0.011857 Jy ! Component: 1600 - total flux cleaned = -0.012717 Jy ! Component: 1650 - total flux cleaned = -0.0132584 Jy ! Component: 1700 - total flux cleaned = -0.013966 Jy ! Component: 1750 - total flux cleaned = -0.0144869 Jy ! Component: 1800 - total flux cleaned = -0.0148278 Jy ! Component: 1850 - total flux cleaned = -0.0152756 Jy ! Component: 1900 - total flux cleaned = -0.0158253 Jy ! Component: 1950 - total flux cleaned = -0.016258 Jy ! Component: 2000 - total flux cleaned = -0.0167902 Jy ! Total flux subtracted in 2048 components = -0.0172625 Jy ! Clean residual min=-0.003169 max=0.002755 Jy/beam ! Clean residual mean=-0.000019 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 2.40887 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 259 components and 2.40887 Jy ![Exited script file: muppet] wmap "J2203+3145_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9044 x 2.237 at 13.65 degrees (North through East) ! Clean map min=-0.0070289 max=1.9392 Jy/beam ! Writing clean map to FITS file: J2203+3145_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.93919 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000925827 device "J2203+3145_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J2203+3145_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143229 0.143229 0.286457 0.572915 1.14583 2.29166 4.58332 9.16664 18.3333 36.6665 73.3331 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.939 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9044 x 2.237 at 13.65 degrees (North through East) ! Clean map min=-0.0070289 max=1.9392 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2203+3145_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J2203+3145_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2203+3145_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 14:04:19 2006