! Started logfile: J2202+4216_X_2006_02_16_yyk_uvs.log on Wed Jul 5 14:01:13 2006 obs J2202+4216_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2202+4216_X_2006_02_16_yyk_uva.fits ! AN table 1: 235 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.812199 visibilities/baseline/integration-bin. ! Found source: J2202+4216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 34356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2202+4216_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.47291 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7476 mas, bmaj=2.284 mas, bpa=24.06 degrees ! Estimated noise=2.09574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.92086 Jy ! Component: 100 - total flux cleaned = 2.36181 Jy ! Total flux subtracted in 100 components = 2.36181 Jy ! Clean residual min=-0.196154 max=0.293296 Jy/beam ! Clean residual mean=0.000522 rms=0.052892 Jy/beam ! Combined flux in latest and established models = 2.36181 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 2.36181 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.704711Jy sigma=12.834631 ! Fit after self-cal, rms=0.686496Jy sigma=12.467538 ! Inverting map and beam ! Estimated beam: bmin=0.7476 mas, bmaj=2.284 mas, bpa=24.06 degrees ! Estimated noise=2.09574 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9497 mas, bmaj=2.416 mas, bpa=23.26 degrees ! Estimated noise=1.4597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.342279 Jy ! Component: 100 - total flux cleaned = 0.518958 Jy ! Component: 150 - total flux cleaned = 0.576505 Jy ! Component: 200 - total flux cleaned = 0.614508 Jy ! Total flux subtracted in 200 components = 0.614508 Jy ! Clean residual min=-0.155348 max=0.239904 Jy/beam ! Clean residual mean=-0.000348 rms=0.047929 Jy/beam ! Combined flux in latest and established models = 2.97632 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 2.97632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.557934Jy sigma=9.934586 ! Fit after self-cal, rms=0.553477Jy sigma=9.860478 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9497 x 2.416 at 23.26 degrees (North through East) ! Clean map min=-0.14869 max=2.315 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.981586 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.94 KP 0.90 ! LA 0.92 MK 0.98 NL 1.54 OV 0.98 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.99916 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.93 KP 0.84 ! LA 0.88 MK 0.95 NL 1.50 OV 0.97 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990531 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.84 KP 0.78 ! LA 0.90 MK 1.03 NL 1.50 OV 1.01 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.979697 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 0.86 KP 0.81 ! LA 0.88 MK 1.04 NL 1.45 OV 1.05 ! PT 1.06 SC 1.04 ! ! ! Fit before self-cal, rms=0.553477Jy sigma=9.860478 ! Fit after self-cal, rms=0.307301Jy sigma=5.616849 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307301Jy sigma=5.616849 ! Fit after self-cal, rms=0.308364Jy sigma=5.612589 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9567 mas, bmaj=2.381 mas, bpa=22.45 degrees ! Estimated noise=1.38852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -3.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.122385 Jy ! Component: 100 - total flux cleaned = 0.135837 Jy ! Component: 150 - total flux cleaned = 0.133791 Jy ! Component: 200 - total flux cleaned = 0.130215 Jy ! Total flux subtracted in 200 components = 0.130215 Jy ! Clean residual min=-0.036750 max=0.053747 Jy/beam ! Clean residual mean=-0.000199 rms=0.010076 Jy/beam ! Combined flux in latest and established models = 3.10654 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 3.10654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234795Jy sigma=4.138125 ! Fit after self-cal, rms=0.226419Jy sigma=4.007952 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226419Jy sigma=4.007952 ! Fit after self-cal, rms=0.159001Jy sigma=2.643518 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.044519 Jy ! Component: 100 - total flux cleaned = 0.0378451 Jy ! Component: 150 - total flux cleaned = 0.0345906 Jy ! Component: 200 - total flux cleaned = 0.0317645 Jy ! Total flux subtracted in 200 components = 0.0317645 Jy ! Clean residual min=-0.028711 max=0.030070 Jy/beam ! Clean residual mean=-0.000141 rms=0.006821 Jy/beam ! Combined flux in latest and established models = 3.1383 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 72 components and 3.1383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138436Jy sigma=2.221543 ! Fit after self-cal, rms=0.130480Jy sigma=2.084246 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9567 x 2.381 at 22.45 degrees (North through East) ! Clean map min=-0.039421 max=2.2529 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130480Jy sigma=2.084246 ! Fit after self-cal, rms=0.121237Jy sigma=1.868980 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121237Jy sigma=1.868980 ! Fit after self-cal, rms=0.120974Jy sigma=1.860239 ! Inverting map and beam ! Estimated beam: bmin=0.9584 mas, bmaj=2.391 mas, bpa=22.65 degrees ! Estimated noise=1.3909 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187739 Jy ! Component: 100 - total flux cleaned = 0.0240454 Jy ! Component: 150 - total flux cleaned = 0.0233066 Jy ! Component: 200 - total flux cleaned = 0.023282 Jy ! Total flux subtracted in 200 components = 0.023282 Jy ! Clean residual min=-0.022992 max=0.022537 Jy/beam ! Clean residual mean=-0.000108 rms=0.005156 Jy/beam ! Combined flux in latest and established models = 3.16158 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 3.16158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109674Jy sigma=1.624771 ! Fit after self-cal, rms=0.108208Jy sigma=1.602509 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108208Jy sigma=1.602509 ! Fit after self-cal, rms=0.107140Jy sigma=1.577877 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107140Jy sigma=1.577877 ! Fit after self-cal, rms=0.107166Jy sigma=1.577756 ! Inverting map and beam ! Estimated beam: bmin=0.9576 mas, bmaj=2.394 mas, bpa=22.82 degrees ! Estimated noise=1.3913 mJy/beam. ! Added new window around map position (-2.8, -15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216066 Jy ! Component: 100 - total flux cleaned = 0.0251213 Jy ! Component: 150 - total flux cleaned = 0.0257358 Jy ! Component: 200 - total flux cleaned = 0.0251879 Jy ! Total flux subtracted in 200 components = 0.0251879 Jy ! Clean residual min=-0.018644 max=0.017134 Jy/beam ! Clean residual mean=-0.000081 rms=0.004134 Jy/beam ! Combined flux in latest and established models = 3.18677 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 110 components and 3.18677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098077Jy sigma=1.398455 ! Fit after self-cal, rms=0.097384Jy sigma=1.389041 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.203 mas, bmaj=2.917 mas, bpa=30.29 degrees ! Estimated noise=1.76816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654932 Jy ! Component: 100 - total flux cleaned = -0.00277019 Jy ! Component: 150 - total flux cleaned = -0.00529869 Jy ! Component: 200 - total flux cleaned = -0.00690942 Jy ! Total flux subtracted in 200 components = -0.00690942 Jy ! Clean residual min=-0.011910 max=0.011364 Jy/beam ! Clean residual mean=-0.000136 rms=0.003464 Jy/beam ! Combined flux in latest and established models = 3.17986 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 144 components and 3.17986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094943Jy sigma=1.346233 ! Fit after self-cal, rms=0.094631Jy sigma=1.338425 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7466 mas, bmaj=2.264 mas, bpa=23.86 degrees ! Estimated noise=2.03417 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.89965 Jy ! Component: 100 - total flux cleaned = 2.36547 Jy ! Component: 150 - total flux cleaned = 2.58916 Jy ! Component: 200 - total flux cleaned = 2.73117 Jy ! Total flux subtracted in 200 components = 2.73117 Jy ! Clean residual min=-0.047781 max=0.057492 Jy/beam ! Clean residual mean=-0.000099 rms=0.015361 Jy/beam ! Combined flux in latest and established models = 2.73117 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.73117 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9576 mas, bmaj=2.394 mas, bpa=22.82 degrees ! Estimated noise=1.3913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145017 Jy ! Component: 100 - total flux cleaned = 0.23599 Jy ! Component: 150 - total flux cleaned = 0.291499 Jy ! Component: 200 - total flux cleaned = 0.3208 Jy ! Total flux subtracted in 200 components = 0.3208 Jy ! Clean residual min=-0.030327 max=0.030853 Jy/beam ! Clean residual mean=-0.000284 rms=0.007673 Jy/beam ! Combined flux in latest and established models = 3.05197 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 72 components and 3.05197 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.203 mas, bmaj=2.917 mas, bpa=30.29 degrees ! Estimated noise=1.76816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0526019 Jy ! Component: 100 - total flux cleaned = 0.0809274 Jy ! Component: 150 - total flux cleaned = 0.0933057 Jy ! Component: 200 - total flux cleaned = 0.0959998 Jy ! Total flux subtracted in 200 components = 0.0959998 Jy ! Clean residual min=-0.020980 max=0.017626 Jy/beam ! Clean residual mean=-0.000280 rms=0.005888 Jy/beam ! Combined flux in latest and established models = 3.14797 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 126 components and 3.14797 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9576 mas, bmaj=2.394 mas, bpa=22.82 degrees ! Estimated noise=1.3913 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047442 Jy ! Component: 100 - total flux cleaned = 0.0058346 Jy ! Component: 150 - total flux cleaned = 0.0104343 Jy ! Component: 200 - total flux cleaned = 0.0132697 Jy ! Total flux subtracted in 200 components = 0.0132697 Jy ! Clean residual min=-0.021398 max=0.015773 Jy/beam ! Clean residual mean=-0.000097 rms=0.004575 Jy/beam ! Combined flux in latest and established models = 3.16124 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 150 components and 3.16124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095421Jy sigma=1.398298 ! Fit after self-cal, rms=0.093703Jy sigma=1.343889 wmodel J2202+4216_X_2006_02_16_yyk\_map.mod ! Writing 150 model components to file: J2202+4216_X_2006_02_16_yyk_map.mod wobs J2202+4216_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2202+4216_X_2006_02_16_yyk_uvs.fits wwins J2202+4216_X_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J2202+4216_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023756 Jy ! Component: 100 - total flux cleaned = -0.00102601 Jy ! Component: 150 - total flux cleaned = 0.000737538 Jy ! Component: 200 - total flux cleaned = 0.00332027 Jy ! Component: 250 - total flux cleaned = 0.00621068 Jy ! Component: 300 - total flux cleaned = 0.00768233 Jy ! Component: 350 - total flux cleaned = 0.00887759 Jy ! Component: 400 - total flux cleaned = 0.00944293 Jy ! Component: 450 - total flux cleaned = 0.0101688 Jy ! Component: 500 - total flux cleaned = 0.0115605 Jy ! Component: 550 - total flux cleaned = 0.0117292 Jy ! Component: 600 - total flux cleaned = 0.012218 Jy ! Component: 650 - total flux cleaned = 0.0125363 Jy ! Component: 700 - total flux cleaned = 0.0128392 Jy ! Component: 750 - total flux cleaned = 0.0135711 Jy ! Component: 800 - total flux cleaned = 0.0135711 Jy ! Component: 850 - total flux cleaned = 0.0138437 Jy ! Component: 900 - total flux cleaned = 0.013844 Jy ! Component: 950 - total flux cleaned = 0.0141053 Jy ! Component: 1000 - total flux cleaned = 0.0141058 Jy ! Component: 1050 - total flux cleaned = 0.0143512 Jy ! Component: 1100 - total flux cleaned = 0.014946 Jy ! Component: 1150 - total flux cleaned = 0.0149459 Jy ! Component: 1200 - total flux cleaned = 0.0149499 Jy ! Component: 1250 - total flux cleaned = 0.0151775 Jy ! Component: 1300 - total flux cleaned = 0.0148541 Jy ! Component: 1350 - total flux cleaned = 0.0150691 Jy ! Component: 1400 - total flux cleaned = 0.0148627 Jy ! Component: 1450 - total flux cleaned = 0.0150647 Jy ! Component: 1500 - total flux cleaned = 0.0151602 Jy ! Component: 1550 - total flux cleaned = 0.0154494 Jy ! Component: 1600 - total flux cleaned = 0.0153517 Jy ! Component: 1650 - total flux cleaned = 0.0154447 Jy ! Component: 1700 - total flux cleaned = 0.0157169 Jy ! Component: 1750 - total flux cleaned = 0.0158093 Jy ! Component: 1800 - total flux cleaned = 0.0159846 Jy ! Component: 1850 - total flux cleaned = 0.0164152 Jy ! Component: 1900 - total flux cleaned = 0.0169187 Jy ! Component: 1950 - total flux cleaned = 0.0169993 Jy ! Component: 2000 - total flux cleaned = 0.0170809 Jy ! Total flux subtracted in 2048 components = 0.0173171 Jy ! Clean residual min=-0.003927 max=0.004038 Jy/beam ! Clean residual mean=-0.000010 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 3.17855 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 282 components and 3.17855 Jy ![Exited script file: muppet] wmap "J2202+4216_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9576 x 2.394 at 22.82 degrees (North through East) ! Clean map min=-0.016126 max=2.2513 Jy/beam ! Writing clean map to FITS file: J2202+4216_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.25131 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00145954 device "J2202+4216_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2202+4216_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.194492 0.194492 0.388984 0.777969 1.55594 3.11188 6.22375 12.4475 24.895 49.79 99.58 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9576 x 2.394 at 22.82 degrees (North through East) ! Clean map min=-0.016126 max=2.2513 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2202+4216_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2202+4216_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2202+4216_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 14:01:41 2006