! Started logfile: J2133+8239_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:56:22 2006 obs J2133+8239_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J2133+8239_S_2006_02_23_yyk_uva.fits ! AN table 1: 882 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.99035 visibilities/baseline/integration-bin. ! Found source: J2133+8239 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 157228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2133+8239_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.212445 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=10.56 mas, bpa=-5.256 degrees ! Estimated noise=1.28425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.142495 Jy ! Component: 100 - total flux cleaned = 0.188361 Jy ! Total flux subtracted in 100 components = 0.188361 Jy ! Clean residual min=-0.012154 max=0.021957 Jy/beam ! Clean residual mean=0.000116 rms=0.004042 Jy/beam ! Combined flux in latest and established models = 0.188361 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.188361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103730Jy sigma=1.547064 ! Fit after self-cal, rms=0.103395Jy sigma=1.536853 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=10.91 mas, bpa=-5.203 degrees ! Estimated noise=0.706247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302627 Jy ! Component: 100 - total flux cleaned = 0.0438131 Jy ! Component: 150 - total flux cleaned = 0.0516186 Jy ! Component: 200 - total flux cleaned = 0.0561601 Jy ! Total flux subtracted in 200 components = 0.0561601 Jy ! Clean residual min=-0.011800 max=0.024337 Jy/beam ! Clean residual mean=0.000428 rms=0.005489 Jy/beam ! Combined flux in latest and established models = 0.244521 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 0.244521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096405Jy sigma=1.396538 ! Fit after self-cal, rms=0.096396Jy sigma=1.395297 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 10.91 at -5.203 degrees (North through East) ! Clean map min=-0.011542 max=0.16838 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.096396Jy sigma=1.395297 ! Fit after self-cal, rms=0.096396Jy sigma=1.395297 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096396Jy sigma=1.395297 ! Fit after self-cal, rms=0.096397Jy sigma=1.395298 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=10.91 mas, bpa=-5.203 degrees ! Estimated noise=0.706247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214785 Jy ! Component: 100 - total flux cleaned = 0.00274954 Jy ! Component: 150 - total flux cleaned = 0.00318833 Jy ! Component: 200 - total flux cleaned = 0.00358265 Jy ! Total flux subtracted in 200 components = 0.00358265 Jy ! Clean residual min=-0.011551 max=0.024422 Jy/beam ! Clean residual mean=0.000423 rms=0.005419 Jy/beam ! Combined flux in latest and established models = 0.248104 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.248104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096177Jy sigma=1.391899 ! Fit after self-cal, rms=0.096181Jy sigma=1.391144 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096181Jy sigma=1.391144 ! Fit after self-cal, rms=0.092172Jy sigma=1.333853 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163921 Jy ! Component: 100 - total flux cleaned = 0.0018844 Jy ! Component: 150 - total flux cleaned = 0.00218225 Jy ! Component: 200 - total flux cleaned = 0.00224996 Jy ! Total flux subtracted in 200 components = 0.00224996 Jy ! Clean residual min=-0.011550 max=0.024182 Jy/beam ! Clean residual mean=0.000416 rms=0.005370 Jy/beam ! Combined flux in latest and established models = 0.250354 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.250354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091949Jy sigma=1.330955 ! Fit after self-cal, rms=0.091596Jy sigma=1.327264 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 10.91 at -5.203 degrees (North through East) ! Clean map min=-0.011484 max=0.16938 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091596Jy sigma=1.327264 ! Fit after self-cal, rms=0.091596Jy sigma=1.327264 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091596Jy sigma=1.327264 ! Fit after self-cal, rms=0.091558Jy sigma=1.326830 ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=10.91 mas, bpa=-5.203 degrees ! Estimated noise=0.706247 mJy/beam. ! Added new window around map position (-15.5, 23.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276762 Jy ! Component: 100 - total flux cleaned = 0.0427774 Jy ! Component: 150 - total flux cleaned = 0.0533133 Jy ! Component: 200 - total flux cleaned = 0.0612527 Jy ! Total flux subtracted in 200 components = 0.0612527 Jy ! Clean residual min=-0.008787 max=0.013591 Jy/beam ! Clean residual mean=0.000142 rms=0.003470 Jy/beam ! Combined flux in latest and established models = 0.311606 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 71 model components to the UV plane model. ! The established model now contains 124 components and 0.311606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084362Jy sigma=1.168405 ! Fit after self-cal, rms=0.083807Jy sigma=1.151834 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083807Jy sigma=1.151834 ! Fit after self-cal, rms=0.082949Jy sigma=1.111037 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082949Jy sigma=1.111037 ! Fit after self-cal, rms=0.082961Jy sigma=1.110798 ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=10.9 mas, bpa=-5.148 degrees ! Estimated noise=0.708846 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782984 Jy ! Component: 100 - total flux cleaned = 0.0127999 Jy ! Component: 150 - total flux cleaned = 0.0161881 Jy ! Component: 200 - total flux cleaned = 0.0177649 Jy ! Total flux subtracted in 200 components = 0.0177649 Jy ! Clean residual min=-0.007176 max=0.008477 Jy/beam ! Clean residual mean=0.000126 rms=0.002163 Jy/beam ! Combined flux in latest and established models = 0.329371 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 156 components and 0.329371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082146Jy sigma=1.094804 ! Fit after self-cal, rms=0.082113Jy sigma=1.092542 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=12.2 mas, bpa=-7.314 degrees ! Estimated noise=0.904237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777756 Jy ! Component: 100 - total flux cleaned = 0.0109018 Jy ! Component: 150 - total flux cleaned = 0.0120384 Jy ! Component: 200 - total flux cleaned = 0.0128725 Jy ! Total flux subtracted in 200 components = 0.0128725 Jy ! Clean residual min=-0.009850 max=0.007580 Jy/beam ! Clean residual mean=0.000208 rms=0.002938 Jy/beam ! Combined flux in latest and established models = 0.342244 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 0.342244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082022Jy sigma=1.093465 ! Fit after self-cal, rms=0.082012Jy sigma=1.092559 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=10.55 mas, bpa=-5.193 degrees ! Estimated noise=1.28798 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145099 Jy ! Component: 100 - total flux cleaned = 0.192058 Jy ! Component: 150 - total flux cleaned = 0.215342 Jy ! Component: 200 - total flux cleaned = 0.231892 Jy ! Total flux subtracted in 200 components = 0.231892 Jy ! Clean residual min=-0.008260 max=0.016068 Jy/beam ! Clean residual mean=0.000078 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 0.231892 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.231892 Jy ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=10.9 mas, bpa=-5.148 degrees ! Estimated noise=0.708846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240338 Jy ! Component: 100 - total flux cleaned = 0.0407792 Jy ! Component: 150 - total flux cleaned = 0.0539703 Jy ! Component: 200 - total flux cleaned = 0.0645577 Jy ! Total flux subtracted in 200 components = 0.0645577 Jy ! Clean residual min=-0.008347 max=0.012315 Jy/beam ! Clean residual mean=0.000202 rms=0.002883 Jy/beam ! Combined flux in latest and established models = 0.296449 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 102 components and 0.296449 Jy ! Inverting map ! Added new window around map position (5, -6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013144 Jy ! Component: 100 - total flux cleaned = 0.0209981 Jy ! Component: 150 - total flux cleaned = 0.0272519 Jy ! Component: 200 - total flux cleaned = 0.0323551 Jy ! Total flux subtracted in 200 components = 0.0323551 Jy ! Clean residual min=-0.006328 max=0.005463 Jy/beam ! Clean residual mean=0.000122 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.328805 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 159 components and 0.328805 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=12.2 mas, bpa=-7.314 degrees ! Estimated noise=0.904237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900919 Jy ! Component: 100 - total flux cleaned = 0.0147183 Jy ! Component: 150 - total flux cleaned = 0.0186422 Jy ! Component: 200 - total flux cleaned = 0.0203976 Jy ! Total flux subtracted in 200 components = 0.0203976 Jy ! Clean residual min=-0.007892 max=0.006540 Jy/beam ! Clean residual mean=0.000168 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 0.349202 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 186 components and 0.349202 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=10.9 mas, bpa=-5.148 degrees ! Estimated noise=0.708846 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00268679 Jy ! Component: 100 - total flux cleaned = -0.00231463 Jy ! Component: 150 - total flux cleaned = -0.00231387 Jy ! Component: 200 - total flux cleaned = -0.002312 Jy ! Total flux subtracted in 200 components = -0.002312 Jy ! Clean residual min=-0.006213 max=0.004502 Jy/beam ! Clean residual mean=0.000089 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.34689 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 214 components and 0.34689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080356Jy sigma=1.062136 ! Fit after self-cal, rms=0.080204Jy sigma=1.059060 wmodel J2133+8239_S_2006_02_23_yyk\_map.mod ! Writing 214 model components to file: J2133+8239_S_2006_02_23_yyk_map.mod wobs J2133+8239_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J2133+8239_S_2006_02_23_yyk_uvs.fits wwins J2133+8239_S_2006_02_23_yyk\_map.win ! wwins: Wrote 3 windows to J2133+8239_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00243681 Jy ! Component: 100 - total flux cleaned = -0.00332818 Jy ! Component: 150 - total flux cleaned = -0.00404833 Jy ! Component: 200 - total flux cleaned = -0.00418026 Jy ! Component: 250 - total flux cleaned = -0.00436545 Jy ! Component: 300 - total flux cleaned = -0.0047153 Jy ! Component: 350 - total flux cleaned = -0.00510264 Jy ! Component: 400 - total flux cleaned = -0.00531283 Jy ! Component: 450 - total flux cleaned = -0.00536275 Jy ! Component: 500 - total flux cleaned = -0.00541141 Jy ! Component: 550 - total flux cleaned = -0.00545817 Jy ! Component: 600 - total flux cleaned = -0.00536842 Jy ! Component: 650 - total flux cleaned = -0.00536904 Jy ! Component: 700 - total flux cleaned = -0.00515988 Jy ! Component: 750 - total flux cleaned = -0.00495607 Jy ! Component: 800 - total flux cleaned = -0.00448215 Jy ! Component: 850 - total flux cleaned = -0.00417679 Jy ! Component: 900 - total flux cleaned = -0.00387898 Jy ! Component: 950 - total flux cleaned = -0.00377023 Jy ! Component: 1000 - total flux cleaned = -0.00355809 Jy ! Component: 1050 - total flux cleaned = -0.00342106 Jy ! Component: 1100 - total flux cleaned = -0.00328737 Jy ! Component: 1150 - total flux cleaned = -0.0031243 Jy ! Component: 1200 - total flux cleaned = -0.0030286 Jy ! Component: 1250 - total flux cleaned = -0.00293473 Jy ! Component: 1300 - total flux cleaned = -0.00290472 Jy ! Component: 1350 - total flux cleaned = -0.00281374 Jy ! Component: 1400 - total flux cleaned = -0.00275388 Jy ! Component: 1450 - total flux cleaned = -0.00263782 Jy ! Component: 1500 - total flux cleaned = -0.00260943 Jy ! Component: 1550 - total flux cleaned = -0.00266536 Jy ! Component: 1600 - total flux cleaned = -0.00272001 Jy ! Component: 1650 - total flux cleaned = -0.00266573 Jy ! Component: 1700 - total flux cleaned = -0.00263904 Jy ! Component: 1750 - total flux cleaned = -0.00263915 Jy ! Component: 1800 - total flux cleaned = -0.00263908 Jy ! Component: 1850 - total flux cleaned = -0.00258879 Jy ! Component: 1900 - total flux cleaned = -0.00263954 Jy ! Component: 1950 - total flux cleaned = -0.00266427 Jy ! Component: 2000 - total flux cleaned = -0.00268827 Jy ! Total flux subtracted in 2048 components = -0.00263994 Jy ! Clean residual min=-0.001589 max=0.001270 Jy/beam ! Clean residual mean=0.000016 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.34425 Jy keep ! Adding 165 model components to the UV plane model. ! The established model now contains 379 components and 0.34425 Jy ![Exited script file: muppet] wmap "J2133+8239_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 10.9 at -5.148 degrees (North through East) ! Clean map min=-0.0042732 max=0.16712 Jy/beam ! Writing clean map to FITS file: J2133+8239_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000528314 device "J2133+8239_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J2133+8239_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.948362 0.948362 1.89672 3.79345 7.5869 15.1738 30.3476 60.6952 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 10.9 at -5.148 degrees (North through East) ! Clean map min=-0.0042732 max=0.16712 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2133+8239_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J2133+8239_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2133+8239_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:57:15 2006