! Started logfile: J2131+8430_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:54:23 2006 obs J2131+8430_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J2131+8430_S_2006_02_23_yyk_uva.fits ! AN table 1: 879 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994893 visibilities/baseline/integration-bin. ! Found source: J2131+8430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 157412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2131+8430_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.370198 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=10.93 mas, bpa=-1.63 degrees ! Estimated noise=1.3386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.239786 Jy ! Component: 100 - total flux cleaned = 0.329916 Jy ! Total flux subtracted in 100 components = 0.329916 Jy ! Clean residual min=-0.039232 max=0.111394 Jy/beam ! Clean residual mean=-0.000089 rms=0.012625 Jy/beam ! Combined flux in latest and established models = 0.329916 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.329916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189362Jy sigma=3.104039 ! Fit after self-cal, rms=0.188976Jy sigma=3.086450 ! Inverting map ! Added new window around map position (7, -13). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102132 Jy ! Component: 100 - total flux cleaned = 0.142152 Jy ! Total flux subtracted in 100 components = 0.142152 Jy ! Clean residual min=-0.022227 max=0.038418 Jy/beam ! Clean residual mean=-0.000146 rms=0.006931 Jy/beam ! Combined flux in latest and established models = 0.472068 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.472068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134114Jy sigma=2.069081 ! Fit after self-cal, rms=0.121165Jy sigma=1.849893 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=11.05 mas, bpa=-1.948 degrees ! Estimated noise=0.732159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455695 Jy ! Component: 100 - total flux cleaned = 0.0621267 Jy ! Component: 150 - total flux cleaned = 0.0682442 Jy ! Component: 200 - total flux cleaned = 0.0721374 Jy ! Total flux subtracted in 200 components = 0.0721374 Jy ! Clean residual min=-0.011958 max=0.016463 Jy/beam ! Clean residual mean=-0.000321 rms=0.004264 Jy/beam ! Combined flux in latest and established models = 0.544206 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 60 components and 0.544205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103256Jy sigma=1.577092 ! Fit after self-cal, rms=0.099043Jy sigma=1.510804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.089 x 11.05 at -1.948 degrees (North through East) ! Clean map min=-0.01042 max=0.28143 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01945 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 0.98 KP 0.93 ! LA 1.17 MK 0.81 NL 0.92 OV 1.01 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992911 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.03 KP 0.96 ! LA 1.13 MK 0.93 NL 0.94 OV 1.05 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.978744 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.05 KP 0.98 ! LA 0.93 MK 1.00 NL 1.04 OV 1.12 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0306 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.00 KP 0.90 ! LA 0.77 MK 1.05 NL 0.97 OV 0.94 ! PT 0.95 SC 1.12 ! ! ! Fit before self-cal, rms=0.099043Jy sigma=1.510804 ! Fit after self-cal, rms=0.090873Jy sigma=1.364268 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090873Jy sigma=1.364268 ! Fit after self-cal, rms=0.090832Jy sigma=1.364504 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=10.99 mas, bpa=-1.354 degrees ! Estimated noise=0.728089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638193 Jy ! Component: 100 - total flux cleaned = 0.00832004 Jy ! Component: 150 - total flux cleaned = 0.0097085 Jy ! Component: 200 - total flux cleaned = 0.0113772 Jy ! Total flux subtracted in 200 components = 0.0113772 Jy ! Clean residual min=-0.007439 max=0.010714 Jy/beam ! Clean residual mean=-0.000057 rms=0.002348 Jy/beam ! Combined flux in latest and established models = 0.555583 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.555583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085986Jy sigma=1.305443 ! Fit after self-cal, rms=0.084932Jy sigma=1.290197 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084932Jy sigma=1.290197 ! Fit after self-cal, rms=0.076901Jy sigma=1.110515 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387419 Jy ! Component: 100 - total flux cleaned = 0.00523821 Jy ! Component: 150 - total flux cleaned = 0.00665336 Jy ! Component: 200 - total flux cleaned = 0.00666419 Jy ! Total flux subtracted in 200 components = 0.00666419 Jy ! Clean residual min=-0.006374 max=0.008357 Jy/beam ! Clean residual mean=-0.000049 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.562247 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.562247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074664Jy sigma=1.084162 ! Fit after self-cal, rms=0.074023Jy sigma=1.075172 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 10.99 at -1.354 degrees (North through East) ! Clean map min=-0.005513 max=0.27723 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074023Jy sigma=1.075172 ! Fit after self-cal, rms=0.070202Jy sigma=1.029774 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070202Jy sigma=1.029774 ! Fit after self-cal, rms=0.070193Jy sigma=1.029551 ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=11.01 mas, bpa=-1.89 degrees ! Estimated noise=0.724526 mJy/beam. ! Added new window around map position (-4.5, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413349 Jy ! Component: 100 - total flux cleaned = 0.00576432 Jy ! Component: 150 - total flux cleaned = 0.00742744 Jy ! Component: 200 - total flux cleaned = 0.00878992 Jy ! Total flux subtracted in 200 components = 0.00878992 Jy ! Clean residual min=-0.003941 max=0.005554 Jy/beam ! Clean residual mean=-0.000037 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.571037 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.571037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068214Jy sigma=0.999956 ! Fit after self-cal, rms=0.067989Jy sigma=0.997913 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067989Jy sigma=0.997913 ! Fit after self-cal, rms=0.066375Jy sigma=0.965659 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066375Jy sigma=0.965659 ! Fit after self-cal, rms=0.066373Jy sigma=0.965638 ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=11 mas, bpa=-2.093 degrees ! Estimated noise=0.723979 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207151 Jy ! Component: 100 - total flux cleaned = 0.00336572 Jy ! Component: 150 - total flux cleaned = 0.00481421 Jy ! Component: 200 - total flux cleaned = 0.00538475 Jy ! Total flux subtracted in 200 components = 0.00538475 Jy ! Clean residual min=-0.003444 max=0.004268 Jy/beam ! Clean residual mean=-0.000036 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.576421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.576421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065529Jy sigma=0.954388 ! Fit after self-cal, rms=0.065408Jy sigma=0.953405 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.22 mas, bmaj=12.71 mas, bpa=-4.148 degrees ! Estimated noise=0.914815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213367 Jy ! Component: 100 - total flux cleaned = -7.29931e-05 Jy ! Component: 150 - total flux cleaned = 0.00015068 Jy ! Component: 200 - total flux cleaned = 0.000285976 Jy ! Total flux subtracted in 200 components = 0.000285976 Jy ! Clean residual min=-0.003016 max=0.004037 Jy/beam ! Clean residual mean=-0.000067 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.576707 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.576707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065085Jy sigma=0.951439 ! Fit after self-cal, rms=0.065030Jy sigma=0.950896 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=10.87 mas, bpa=-1.68 degrees ! Estimated noise=1.32446 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.262525 Jy ! Component: 100 - total flux cleaned = 0.369828 Jy ! Component: 150 - total flux cleaned = 0.429804 Jy ! Component: 200 - total flux cleaned = 0.469285 Jy ! Total flux subtracted in 200 components = 0.469285 Jy ! Clean residual min=-0.010114 max=0.016249 Jy/beam ! Clean residual mean=-0.000015 rms=0.003523 Jy/beam ! Combined flux in latest and established models = 0.469285 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.469285 Jy ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=11 mas, bpa=-2.093 degrees ! Estimated noise=0.723979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432871 Jy ! Component: 100 - total flux cleaned = 0.0665834 Jy ! Component: 150 - total flux cleaned = 0.0805403 Jy ! Component: 200 - total flux cleaned = 0.0893609 Jy ! Total flux subtracted in 200 components = 0.0893609 Jy ! Clean residual min=-0.003739 max=0.003754 Jy/beam ! Clean residual mean=-0.000029 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.558645 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 95 components and 0.558645 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.22 mas, bmaj=12.71 mas, bpa=-4.148 degrees ! Estimated noise=0.914815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868224 Jy ! Component: 100 - total flux cleaned = 0.0131666 Jy ! Component: 150 - total flux cleaned = 0.0148449 Jy ! Component: 200 - total flux cleaned = 0.0158177 Jy ! Total flux subtracted in 200 components = 0.0158177 Jy ! Clean residual min=-0.003468 max=0.003603 Jy/beam ! Clean residual mean=-0.000064 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.574463 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 143 components and 0.574463 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=11 mas, bpa=-2.093 degrees ! Estimated noise=0.723979 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114396 Jy ! Component: 100 - total flux cleaned = 0.00159324 Jy ! Component: 150 - total flux cleaned = 0.0017793 Jy ! Component: 200 - total flux cleaned = 0.00178412 Jy ! Total flux subtracted in 200 components = 0.00178412 Jy ! Clean residual min=-0.003130 max=0.002691 Jy/beam ! Clean residual mean=-0.000034 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.576247 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 168 components and 0.576247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064408Jy sigma=0.943614 ! Fit after self-cal, rms=0.064250Jy sigma=0.942057 wmodel J2131+8430_S_2006_02_23_yyk\_map.mod ! Writing 168 model components to file: J2131+8430_S_2006_02_23_yyk_map.mod wobs J2131+8430_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J2131+8430_S_2006_02_23_yyk_uvs.fits wwins J2131+8430_S_2006_02_23_yyk\_map.win ! wwins: Wrote 3 windows to J2131+8430_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874027 Jy ! Component: 100 - total flux cleaned = -0.00147767 Jy ! Component: 150 - total flux cleaned = -0.00184282 Jy ! Component: 200 - total flux cleaned = -0.00214991 Jy ! Component: 250 - total flux cleaned = -0.00233541 Jy ! Component: 300 - total flux cleaned = -0.00247829 Jy ! Component: 350 - total flux cleaned = -0.00265124 Jy ! Component: 400 - total flux cleaned = -0.0027864 Jy ! Component: 450 - total flux cleaned = -0.00291816 Jy ! Component: 500 - total flux cleaned = -0.00314096 Jy ! Component: 550 - total flux cleaned = -0.00323406 Jy ! Component: 600 - total flux cleaned = -0.00347593 Jy ! Component: 650 - total flux cleaned = -0.00359422 Jy ! Component: 700 - total flux cleaned = -0.00368059 Jy ! Component: 750 - total flux cleaned = -0.0036806 Jy ! Component: 800 - total flux cleaned = -0.00379031 Jy ! Component: 850 - total flux cleaned = -0.00376241 Jy ! Component: 900 - total flux cleaned = -0.00368251 Jy ! Component: 950 - total flux cleaned = -0.00368222 Jy ! Component: 1000 - total flux cleaned = -0.00368195 Jy ! Component: 1050 - total flux cleaned = -0.00358117 Jy ! Component: 1100 - total flux cleaned = -0.00353186 Jy ! Component: 1150 - total flux cleaned = -0.00350746 Jy ! Component: 1200 - total flux cleaned = -0.00341281 Jy ! Component: 1250 - total flux cleaned = -0.00336572 Jy ! Component: 1300 - total flux cleaned = -0.0033426 Jy ! Component: 1350 - total flux cleaned = -0.00327424 Jy ! Component: 1400 - total flux cleaned = -0.00325168 Jy ! Component: 1450 - total flux cleaned = -0.00320754 Jy ! Component: 1500 - total flux cleaned = -0.00316385 Jy ! Component: 1550 - total flux cleaned = -0.00307807 Jy ! Component: 1600 - total flux cleaned = -0.00299438 Jy ! Component: 1650 - total flux cleaned = -0.00293279 Jy ! Component: 1700 - total flux cleaned = -0.00295345 Jy ! Component: 1750 - total flux cleaned = -0.00291356 Jy ! Component: 1800 - total flux cleaned = -0.00287409 Jy ! Component: 1850 - total flux cleaned = -0.00285471 Jy ! Component: 1900 - total flux cleaned = -0.00281607 Jy ! Component: 1950 - total flux cleaned = -0.00281634 Jy ! Component: 2000 - total flux cleaned = -0.00274117 Jy ! Total flux subtracted in 2048 components = -0.00270414 Jy ! Clean residual min=-0.001005 max=0.001098 Jy/beam ! Clean residual mean=-0.000019 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.573543 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 311 components and 0.573543 Jy ![Exited script file: muppet] wmap "J2131+8430_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 11 at -2.093 degrees (North through East) ! Clean map min=-0.0020083 max=0.27399 Jy/beam ! Writing clean map to FITS file: J2131+8430_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.273988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000376902 device "J2131+8430_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J2131+8430_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.412685 0.412685 0.825369 1.65074 3.30148 6.60295 13.2059 26.4118 52.8236 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.273 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 11 at -2.093 degrees (North through East) ! Clean map min=-0.0020083 max=0.27399 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2131+8430_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J2131+8430_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2131+8430_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:55:23 2006