! Started logfile: J2114+8204_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:52:27 2006 obs J2114+8204_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J2114+8204_S_2006_02_23_yyk_uva.fits ! AN table 1: 869 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.999565 visibilities/baseline/integration-bin. ! Found source: J2114+8204 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 156352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2114+8204_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.210457 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=10.31 mas, bpa=-5.628 degrees ! Estimated noise=1.11819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.160729 Jy ! Component: 100 - total flux cleaned = 0.196292 Jy ! Total flux subtracted in 100 components = 0.196292 Jy ! Clean residual min=-0.009242 max=0.012212 Jy/beam ! Clean residual mean=-0.000051 rms=0.002782 Jy/beam ! Combined flux in latest and established models = 0.196292 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.196292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070554Jy sigma=1.210966 ! Fit after self-cal, rms=0.069865Jy sigma=1.194870 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=10.9 mas, bpa=-4.087 degrees ! Estimated noise=0.706057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188404 Jy ! Component: 100 - total flux cleaned = 0.0249176 Jy ! Component: 150 - total flux cleaned = 0.0262216 Jy ! Component: 200 - total flux cleaned = 0.0267323 Jy ! Total flux subtracted in 200 components = 0.0267323 Jy ! Clean residual min=-0.005476 max=0.004757 Jy/beam ! Clean residual mean=-0.000119 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.223024 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 41 components and 0.223024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065249Jy sigma=1.123757 ! Fit after self-cal, rms=0.065109Jy sigma=1.121249 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 10.9 at -4.087 degrees (North through East) ! Clean map min=-0.0050274 max=0.19005 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.997076 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00 KP 0.95 ! LA 1.16 MK 0.99 NL 0.97 OV 0.99 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.971444 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.00 KP 0.97 ! LA 0.93 MK 1.09 NL 1.04 OV 1.03 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.065109Jy sigma=1.121249 ! Fit after self-cal, rms=0.064350Jy sigma=1.108698 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064350Jy sigma=1.108698 ! Fit after self-cal, rms=0.064356Jy sigma=1.108693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=10.87 mas, bpa=-4.295 degrees ! Estimated noise=0.706977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017329 Jy ! Component: 100 - total flux cleaned = -0.000172899 Jy ! Component: 150 - total flux cleaned = -0.000225253 Jy ! Component: 200 - total flux cleaned = -0.000128131 Jy ! Total flux subtracted in 200 components = -0.000128131 Jy ! Clean residual min=-0.003844 max=0.003369 Jy/beam ! Clean residual mean=-0.000070 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.222896 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 0.222896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064211Jy sigma=1.106475 ! Fit after self-cal, rms=0.064209Jy sigma=1.106384 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064209Jy sigma=1.106384 ! Fit after self-cal, rms=0.059687Jy sigma=1.020538 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862939 Jy ! Component: 100 - total flux cleaned = 0.000903582 Jy ! Component: 150 - total flux cleaned = 0.000942078 Jy ! Component: 200 - total flux cleaned = 0.000977803 Jy ! Total flux subtracted in 200 components = 0.000977803 Jy ! Clean residual min=-0.003601 max=0.003319 Jy/beam ! Clean residual mean=-0.000071 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.223873 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 93 components and 0.223873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059543Jy sigma=1.019281 ! Fit after self-cal, rms=0.059436Jy sigma=1.017135 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.104 x 10.87 at -4.295 degrees (North through East) ! Clean map min=-0.0034274 max=0.1919 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059436Jy sigma=1.017135 ! Fit after self-cal, rms=0.058658Jy sigma=0.988822 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058658Jy sigma=0.988822 ! Fit after self-cal, rms=0.058649Jy sigma=0.988597 ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=10.81 mas, bpa=-4.195 degrees ! Estimated noise=0.717251 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438488 Jy ! Component: 100 - total flux cleaned = 0.00667623 Jy ! Component: 150 - total flux cleaned = 0.00832943 Jy ! Component: 200 - total flux cleaned = 0.00911538 Jy ! Total flux subtracted in 200 components = 0.00911538 Jy ! Clean residual min=-0.003148 max=0.002468 Jy/beam ! Clean residual mean=0.000011 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.232989 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 126 components and 0.232989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058203Jy sigma=0.983438 ! Fit after self-cal, rms=0.058191Jy sigma=0.983196 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058191Jy sigma=0.983196 ! Fit after self-cal, rms=0.057464Jy sigma=0.961352 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057464Jy sigma=0.961352 ! Fit after self-cal, rms=0.057464Jy sigma=0.961282 ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=10.8 mas, bpa=-4.183 degrees ! Estimated noise=0.724507 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334031 Jy ! Component: 100 - total flux cleaned = 0.00496187 Jy ! Component: 150 - total flux cleaned = 0.00572799 Jy ! Component: 200 - total flux cleaned = 0.00625074 Jy ! Total flux subtracted in 200 components = 0.00625074 Jy ! Clean residual min=-0.003004 max=0.002509 Jy/beam ! Clean residual mean=0.000019 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.23924 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 166 components and 0.23924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057221Jy sigma=0.958339 ! Fit after self-cal, rms=0.057220Jy sigma=0.958271 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.295 mas, bmaj=12 mas, bpa=-5.294 degrees ! Estimated noise=0.926667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168802 Jy ! Component: 100 - total flux cleaned = 0.00255043 Jy ! Component: 150 - total flux cleaned = 0.00273935 Jy ! Component: 200 - total flux cleaned = 0.00278645 Jy ! Total flux subtracted in 200 components = 0.00278645 Jy ! Clean residual min=-0.002943 max=0.002360 Jy/beam ! Clean residual mean=0.000035 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.242026 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 178 components and 0.242026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057193Jy sigma=0.958107 ! Fit after self-cal, rms=0.057192Jy sigma=0.958072 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.425 mas, bmaj=10.28 mas, bpa=-5.654 degrees ! Estimated noise=1.1411 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.166101 Jy ! Component: 100 - total flux cleaned = 0.204322 Jy ! Component: 150 - total flux cleaned = 0.220508 Jy ! Component: 200 - total flux cleaned = 0.229006 Jy ! Total flux subtracted in 200 components = 0.229006 Jy ! Clean residual min=-0.004263 max=0.004632 Jy/beam ! Clean residual mean=0.000002 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.229006 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.229006 Jy ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=10.8 mas, bpa=-4.183 degrees ! Estimated noise=0.724507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693109 Jy ! Component: 100 - total flux cleaned = 0.00998512 Jy ! Component: 150 - total flux cleaned = 0.0108942 Jy ! Component: 200 - total flux cleaned = 0.0113085 Jy ! Total flux subtracted in 200 components = 0.0113085 Jy ! Clean residual min=-0.003119 max=0.002585 Jy/beam ! Clean residual mean=0.000017 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.240314 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 61 components and 0.240314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.295 mas, bmaj=12 mas, bpa=-5.294 degrees ! Estimated noise=0.926667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133379 Jy ! Component: 100 - total flux cleaned = 0.00146865 Jy ! Component: 150 - total flux cleaned = 0.00150859 Jy ! Component: 200 - total flux cleaned = 0.0015454 Jy ! Total flux subtracted in 200 components = 0.0015454 Jy ! Clean residual min=-0.002960 max=0.002743 Jy/beam ! Clean residual mean=0.000036 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.24186 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.24186 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=10.8 mas, bpa=-4.183 degrees ! Estimated noise=0.724507 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.04088e-05 Jy ! Component: 100 - total flux cleaned = -4.96643e-05 Jy ! Component: 150 - total flux cleaned = -5.00734e-05 Jy ! Component: 200 - total flux cleaned = -0.000121926 Jy ! Total flux subtracted in 200 components = -0.000121926 Jy ! Clean residual min=-0.002907 max=0.002338 Jy/beam ! Clean residual mean=0.000016 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.241738 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.241738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057213Jy sigma=0.958507 ! Fit after self-cal, rms=0.057208Jy sigma=0.958457 wmodel J2114+8204_S_2006_02_23_yyk\_map.mod ! Writing 104 model components to file: J2114+8204_S_2006_02_23_yyk_map.mod wobs J2114+8204_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J2114+8204_S_2006_02_23_yyk_uvs.fits wwins J2114+8204_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J2114+8204_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000958604 Jy ! Component: 100 - total flux cleaned = -0.00104443 Jy ! Component: 150 - total flux cleaned = -0.00108248 Jy ! Component: 200 - total flux cleaned = -0.00101417 Jy ! Component: 250 - total flux cleaned = -0.00101378 Jy ! Component: 300 - total flux cleaned = -0.00101439 Jy ! Component: 350 - total flux cleaned = -0.00104425 Jy ! Component: 400 - total flux cleaned = -0.00101496 Jy ! Component: 450 - total flux cleaned = -0.00109898 Jy ! Component: 500 - total flux cleaned = -0.00120627 Jy ! Component: 550 - total flux cleaned = -0.0012323 Jy ! Component: 600 - total flux cleaned = -0.00123267 Jy ! Component: 650 - total flux cleaned = -0.00123298 Jy ! Component: 700 - total flux cleaned = -0.00116062 Jy ! Component: 750 - total flux cleaned = -0.00116034 Jy ! Component: 800 - total flux cleaned = -0.00113721 Jy ! Component: 850 - total flux cleaned = -0.00107006 Jy ! Component: 900 - total flux cleaned = -0.00107074 Jy ! Component: 950 - total flux cleaned = -0.00111462 Jy ! Component: 1000 - total flux cleaned = -0.00111407 Jy ! Component: 1050 - total flux cleaned = -0.00102947 Jy ! Component: 1100 - total flux cleaned = -0.000988351 Jy ! Component: 1150 - total flux cleaned = -0.00104994 Jy ! Component: 1200 - total flux cleaned = -0.00105016 Jy ! Component: 1250 - total flux cleaned = -0.00106961 Jy ! Component: 1300 - total flux cleaned = -0.00106998 Jy ! Component: 1350 - total flux cleaned = -0.00110917 Jy ! Component: 1400 - total flux cleaned = -0.00126197 Jy ! Component: 1450 - total flux cleaned = -0.00118638 Jy ! Component: 1500 - total flux cleaned = -0.0012799 Jy ! Component: 1550 - total flux cleaned = -0.00127993 Jy ! Component: 1600 - total flux cleaned = -0.00135308 Jy ! Component: 1650 - total flux cleaned = -0.00133508 Jy ! Component: 1700 - total flux cleaned = -0.00137115 Jy ! Component: 1750 - total flux cleaned = -0.00145979 Jy ! Component: 1800 - total flux cleaned = -0.00145976 Jy ! Component: 1850 - total flux cleaned = -0.00144256 Jy ! Component: 1900 - total flux cleaned = -0.00149453 Jy ! Component: 1950 - total flux cleaned = -0.00152863 Jy ! Component: 2000 - total flux cleaned = -0.00154551 Jy ! Total flux subtracted in 2048 components = -0.00152863 Jy ! Clean residual min=-0.000959 max=0.000949 Jy/beam ! Clean residual mean=-0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.240209 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 250 components and 0.240209 Jy ![Exited script file: muppet] wmap "J2114+8204_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 10.8 at -4.183 degrees (North through East) ! Clean map min=-0.002476 max=0.1959 Jy/beam ! Writing clean map to FITS file: J2114+8204_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1959 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344115 device "J2114+8204_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J2114+8204_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.526976 0.526976 1.05395 2.1079 4.21581 8.43161 16.8632 33.7265 67.4529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.195 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 10.8 at -4.183 degrees (North through East) ! Clean map min=-0.002476 max=0.1959 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2114+8204_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J2114+8204_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2114+8204_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:53:23 2006