! Started logfile: J2101+0341_X_2006_02_23_yyk_uvs.log on Wed Jul 5 13:50:49 2006 obs J2101+0341_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J2101+0341_X_2006_02_23_yyk_uva.fits ! AN table 1: 137 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.953447 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2406 lines of history. ! ! Reading 23512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2101+0341_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.0023 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7401 mas, bmaj=1.863 mas, bpa=-5.607 degrees ! Estimated noise=2.32009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.848097 Jy ! Component: 100 - total flux cleaned = 0.978645 Jy ! Total flux subtracted in 100 components = 0.978645 Jy ! Clean residual min=-0.029945 max=0.032143 Jy/beam ! Clean residual mean=-0.000013 rms=0.007015 Jy/beam ! Combined flux in latest and established models = 0.978644 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.978644 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.178535Jy sigma=1.923840 ! Fit after self-cal, rms=0.178303Jy sigma=1.908026 ! Inverting map and beam ! Estimated beam: bmin=0.7401 mas, bmaj=1.863 mas, bpa=-5.607 degrees ! Estimated noise=2.32009 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8902 mas, bmaj=2.171 mas, bpa=-5.749 degrees ! Estimated noise=1.70346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442725 Jy ! Component: 100 - total flux cleaned = 0.062957 Jy ! Component: 150 - total flux cleaned = 0.0724893 Jy ! Component: 200 - total flux cleaned = 0.0775666 Jy ! Total flux subtracted in 200 components = 0.0775666 Jy ! Clean residual min=-0.027151 max=0.017864 Jy/beam ! Clean residual mean=0.000026 rms=0.005445 Jy/beam ! Combined flux in latest and established models = 1.05621 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 1.05621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170751Jy sigma=1.726072 ! Fit after self-cal, rms=0.170811Jy sigma=1.725051 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8902 x 2.171 at -5.749 degrees (North through East) ! Clean map min=-0.025868 max=0.97815 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995738 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.07 KP 0.99 ! LA 1.01 MK 0.97 NL 1.03 OV 0.98 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01274 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.06 KP 0.92 ! LA 0.96 MK 0.97 NL 1.03 OV 0.96 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00689 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.95 KP 0.86 ! LA 0.98 MK 1.00 NL 1.01 OV 0.99 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.98652 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 1.00 KP 0.88 ! LA 0.96 MK 1.05 NL 1.01 OV 1.02 ! PT 1.12 SC 1.03 ! ! ! Fit before self-cal, rms=0.170811Jy sigma=1.725051 ! Fit after self-cal, rms=0.159864Jy sigma=1.393312 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159864Jy sigma=1.393312 ! Fit after self-cal, rms=0.159855Jy sigma=1.393290 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.892 mas, bmaj=2.18 mas, bpa=-5.767 degrees ! Estimated noise=1.70328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273393 Jy ! Component: 100 - total flux cleaned = 0.0026627 Jy ! Component: 150 - total flux cleaned = 0.00272722 Jy ! Component: 200 - total flux cleaned = 0.00283422 Jy ! Total flux subtracted in 200 components = 0.00283422 Jy ! Clean residual min=-0.008733 max=0.008896 Jy/beam ! Clean residual mean=-0.000001 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 1.05905 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 1.05905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159647Jy sigma=1.391061 ! Fit after self-cal, rms=0.159724Jy sigma=1.390403 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159724Jy sigma=1.390403 ! Fit after self-cal, rms=0.139210Jy sigma=1.119989 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103001 Jy ! Component: 100 - total flux cleaned = 0.000697486 Jy ! Component: 150 - total flux cleaned = 0.000427672 Jy ! Component: 200 - total flux cleaned = 0.000250095 Jy ! Total flux subtracted in 200 components = 0.000250095 Jy ! Clean residual min=-0.008070 max=0.008319 Jy/beam ! Clean residual mean=-0.000001 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 1.0593 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 1.0593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139189Jy sigma=1.117710 ! Fit after self-cal, rms=0.130041Jy sigma=1.066369 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.892 x 2.18 at -5.767 degrees (North through East) ! Clean map min=-0.0071018 max=0.9812 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130041Jy sigma=1.066369 ! Fit after self-cal, rms=0.127693Jy sigma=1.018831 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127693Jy sigma=1.018831 ! Fit after self-cal, rms=0.124388Jy sigma=1.005762 ! Inverting map and beam ! Estimated beam: bmin=0.89 mas, bmaj=2.177 mas, bpa=-5.735 degrees ! Estimated noise=1.70113 mJy/beam. ! Added new window around map position (0.6, 3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906074 Jy ! Component: 100 - total flux cleaned = 0.01005 Jy ! Component: 150 - total flux cleaned = 0.010194 Jy ! Component: 200 - total flux cleaned = 0.0103002 Jy ! Total flux subtracted in 200 components = 0.0103002 Jy ! Clean residual min=-0.006538 max=0.005648 Jy/beam ! Clean residual mean=-0.000002 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 1.0696 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 1.0696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123677Jy sigma=0.989708 ! Fit after self-cal, rms=0.122497Jy sigma=0.985199 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122497Jy sigma=0.985199 ! Fit after self-cal, rms=0.120756Jy sigma=0.965067 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120756Jy sigma=0.965067 ! Fit after self-cal, rms=0.120407Jy sigma=0.964002 ! Inverting map and beam ! Estimated beam: bmin=0.8891 mas, bmaj=2.173 mas, bpa=-5.686 degrees ! Estimated noise=1.70146 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367212 Jy ! Component: 100 - total flux cleaned = 0.0044609 Jy ! Component: 150 - total flux cleaned = 0.00472032 Jy ! Component: 200 - total flux cleaned = 0.00495435 Jy ! Total flux subtracted in 200 components = 0.00495435 Jy ! Clean residual min=-0.006067 max=0.005070 Jy/beam ! Clean residual mean=0.000000 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 1.07455 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 1.07455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120187Jy sigma=0.960243 ! Fit after self-cal, rms=0.120062Jy sigma=0.959674 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=3.479 mas, bpa=2.796 degrees ! Estimated noise=2.15114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222749 Jy ! Component: 100 - total flux cleaned = 0.00302514 Jy ! Component: 150 - total flux cleaned = 0.00337779 Jy ! Component: 200 - total flux cleaned = 0.00355382 Jy ! Total flux subtracted in 200 components = 0.00355382 Jy ! Clean residual min=-0.006912 max=0.005563 Jy/beam ! Clean residual mean=0.000002 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 1.0781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 95 components and 1.0781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120184Jy sigma=0.959179 ! Fit after self-cal, rms=0.120142Jy sigma=0.958841 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7418 mas, bmaj=1.863 mas, bpa=-5.452 degrees ! Estimated noise=2.3173 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.849714 Jy ! Component: 100 - total flux cleaned = 0.98098 Jy ! Component: 150 - total flux cleaned = 1.01994 Jy ! Component: 200 - total flux cleaned = 1.03925 Jy ! Total flux subtracted in 200 components = 1.03925 Jy ! Clean residual min=-0.009868 max=0.011088 Jy/beam ! Clean residual mean=-0.000007 rms=0.002653 Jy/beam ! Combined flux in latest and established models = 1.03925 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 1.03925 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8891 mas, bmaj=2.173 mas, bpa=-5.686 degrees ! Estimated noise=1.70146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146628 Jy ! Component: 100 - total flux cleaned = 0.0228052 Jy ! Component: 150 - total flux cleaned = 0.0283362 Jy ! Component: 200 - total flux cleaned = 0.0312338 Jy ! Total flux subtracted in 200 components = 0.0312338 Jy ! Clean residual min=-0.006786 max=0.005336 Jy/beam ! Clean residual mean=-0.000001 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 1.07049 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 61 components and 1.07049 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=3.479 mas, bpa=2.796 degrees ! Estimated noise=2.15114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444227 Jy ! Component: 100 - total flux cleaned = 0.00551629 Jy ! Component: 150 - total flux cleaned = 0.00608629 Jy ! Component: 200 - total flux cleaned = 0.00648616 Jy ! Total flux subtracted in 200 components = 0.00648616 Jy ! Clean residual min=-0.007273 max=0.005232 Jy/beam ! Clean residual mean=0.000001 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 1.07697 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 1.07697 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8891 mas, bmaj=2.173 mas, bpa=-5.686 degrees ! Estimated noise=1.70146 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000592272 Jy ! Component: 100 - total flux cleaned = -0.000592396 Jy ! Component: 150 - total flux cleaned = -0.000514079 Jy ! Component: 200 - total flux cleaned = -0.000512169 Jy ! Total flux subtracted in 200 components = -0.000512169 Jy ! Clean residual min=-0.005958 max=0.004881 Jy/beam ! Clean residual mean=0.000000 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 1.07646 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 1.07646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120005Jy sigma=0.959111 ! Fit after self-cal, rms=0.119965Jy sigma=0.958878 wmodel J2101+0341_X_2006_02_23_yyk\_map.mod ! Writing 97 model components to file: J2101+0341_X_2006_02_23_yyk_map.mod wobs J2101+0341_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J2101+0341_X_2006_02_23_yyk_uvs.fits wwins J2101+0341_X_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J2101+0341_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0026439 Jy ! Component: 100 - total flux cleaned = -0.00337253 Jy ! Component: 150 - total flux cleaned = -0.00378644 Jy ! Component: 200 - total flux cleaned = -0.00433269 Jy ! Component: 250 - total flux cleaned = -0.00500326 Jy ! Component: 300 - total flux cleaned = -0.00571414 Jy ! Component: 350 - total flux cleaned = -0.00605458 Jy ! Component: 400 - total flux cleaned = -0.00631836 Jy ! Component: 450 - total flux cleaned = -0.00682783 Jy ! Component: 500 - total flux cleaned = -0.00707382 Jy ! Component: 550 - total flux cleaned = -0.00737211 Jy ! Component: 600 - total flux cleaned = -0.00748815 Jy ! Component: 650 - total flux cleaned = -0.00743164 Jy ! Component: 700 - total flux cleaned = -0.00732146 Jy ! Component: 750 - total flux cleaned = -0.00715913 Jy ! Component: 800 - total flux cleaned = -0.00689577 Jy ! Component: 850 - total flux cleaned = -0.00669021 Jy ! Component: 900 - total flux cleaned = -0.00674101 Jy ! Component: 950 - total flux cleaned = -0.0065402 Jy ! Component: 1000 - total flux cleaned = -0.00634443 Jy ! Component: 1050 - total flux cleaned = -0.00629584 Jy ! Component: 1100 - total flux cleaned = -0.00615472 Jy ! Component: 1150 - total flux cleaned = -0.00615547 Jy ! Component: 1200 - total flux cleaned = -0.00629101 Jy ! Component: 1250 - total flux cleaned = -0.00624584 Jy ! Component: 1300 - total flux cleaned = -0.00633329 Jy ! Component: 1350 - total flux cleaned = -0.00620293 Jy ! Component: 1400 - total flux cleaned = -0.00624486 Jy ! Component: 1450 - total flux cleaned = -0.00616115 Jy ! Component: 1500 - total flux cleaned = -0.00612001 Jy ! Component: 1550 - total flux cleaned = -0.00607951 Jy ! Component: 1600 - total flux cleaned = -0.00603959 Jy ! Component: 1650 - total flux cleaned = -0.0059598 Jy ! Component: 1700 - total flux cleaned = -0.00580494 Jy ! Component: 1750 - total flux cleaned = -0.00584315 Jy ! Component: 1800 - total flux cleaned = -0.00580498 Jy ! Component: 1850 - total flux cleaned = -0.00569307 Jy ! Component: 1900 - total flux cleaned = -0.00561974 Jy ! Component: 1950 - total flux cleaned = -0.00558335 Jy ! Component: 2000 - total flux cleaned = -0.00547532 Jy ! Total flux subtracted in 2048 components = -0.00533293 Jy ! Clean residual min=-0.002384 max=0.002013 Jy/beam ! Clean residual mean=0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 1.07113 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 231 components and 1.07113 Jy ![Exited script file: muppet] wmap "J2101+0341_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8891 x 2.173 at -5.686 degrees (North through East) ! Clean map min=-0.0040225 max=0.97983 Jy/beam ! Writing clean map to FITS file: J2101+0341_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.979827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000637974 device "J2101+0341_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J2101+0341_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.195333 0.195333 0.390665 0.781331 1.56266 3.12532 6.25065 12.5013 25.0026 50.0052 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.979 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8891 x 2.173 at -5.686 degrees (North through East) ! Clean map min=-0.0040225 max=0.97983 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2101+0341_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J2101+0341_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2101+0341_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:51:42 2006