! Started logfile: J2101+0341_X_2006_02_16_yyk_uvs.log on Wed Jul 5 13:49:50 2006 obs J2101+0341_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2101+0341_X_2006_02_16_yyk_uva.fits ! AN table 1: 263 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.528179 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 25004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2101+0341_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.973236 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7721 mas, bmaj=3.164 mas, bpa=-19.46 degrees ! Estimated noise=2.03528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.814815 Jy ! Component: 100 - total flux cleaned = 0.950044 Jy ! Total flux subtracted in 100 components = 0.950044 Jy ! Clean residual min=-0.045717 max=0.090645 Jy/beam ! Clean residual mean=-0.000080 rms=0.016706 Jy/beam ! Combined flux in latest and established models = 0.950044 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.950044 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.198081Jy sigma=3.319207 ! Fit after self-cal, rms=0.197073Jy sigma=3.323329 ! Inverting map and beam ! Estimated beam: bmin=0.7704 mas, bmaj=3.137 mas, bpa=-19.73 degrees ! Estimated noise=2.03859 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9628 mas, bmaj=3.173 mas, bpa=-18.27 degrees ! Estimated noise=1.66068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0687771 Jy ! Component: 100 - total flux cleaned = 0.0943537 Jy ! Component: 150 - total flux cleaned = 0.0980564 Jy ! Component: 200 - total flux cleaned = 0.0988015 Jy ! Total flux subtracted in 200 components = 0.0988015 Jy ! Clean residual min=-0.035564 max=0.069570 Jy/beam ! Clean residual mean=0.000048 rms=0.014515 Jy/beam ! Combined flux in latest and established models = 1.04885 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 1.04885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180854Jy sigma=2.987413 ! Fit after self-cal, rms=0.180653Jy sigma=2.985797 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9628 x 3.173 at -18.27 degrees (North through East) ! Clean map min=-0.035097 max=0.92694 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.985797 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.90 KP 0.96 ! LA 0.97 MK 1.04 NL 1.45 OV 0.97 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00589 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.88 KP 0.91 ! LA 0.93 MK 1.00 NL 1.37 OV 0.93 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.996173 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.83 KP 0.84 ! LA 0.94 MK 1.03 NL 1.36 OV 0.97 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.982441 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.86 KP 0.87 ! LA 0.93 MK 1.09 NL 1.33 OV 1.00 ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.180653Jy sigma=2.985797 ! Fit after self-cal, rms=0.105530Jy sigma=1.706901 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105530Jy sigma=1.706901 ! Fit after self-cal, rms=0.105573Jy sigma=1.706356 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9938 mas, bmaj=3.11 mas, bpa=-17.29 degrees ! Estimated noise=1.62309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0237376 Jy ! Component: 100 - total flux cleaned = -0.0277184 Jy ! Component: 150 - total flux cleaned = -0.027727 Jy ! Component: 200 - total flux cleaned = -0.0277169 Jy ! Total flux subtracted in 200 components = -0.0277169 Jy ! Clean residual min=-0.011873 max=0.008273 Jy/beam ! Clean residual mean=0.000007 rms=0.002779 Jy/beam ! Combined flux in latest and established models = 1.02113 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 1.02113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100258Jy sigma=1.619453 ! Fit after self-cal, rms=0.100239Jy sigma=1.619427 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100239Jy sigma=1.619427 ! Fit after self-cal, rms=0.074500Jy sigma=1.139279 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287767 Jy ! Component: 100 - total flux cleaned = 0.00332624 Jy ! Component: 150 - total flux cleaned = 0.00374038 Jy ! Component: 200 - total flux cleaned = 0.00412644 Jy ! Total flux subtracted in 200 components = 0.00412644 Jy ! Clean residual min=-0.010339 max=0.008937 Jy/beam ! Clean residual mean=0.000005 rms=0.002532 Jy/beam ! Combined flux in latest and established models = 1.02525 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 1.02525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073288Jy sigma=1.118964 ! Fit after self-cal, rms=0.071235Jy sigma=1.077411 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9938 x 3.11 at -17.29 degrees (North through East) ! Clean map min=-0.0098234 max=0.91175 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071235Jy sigma=1.077411 ! Fit after self-cal, rms=0.067495Jy sigma=1.005422 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067495Jy sigma=1.005422 ! Fit after self-cal, rms=0.067409Jy sigma=1.002022 ! Inverting map and beam ! Estimated beam: bmin=0.9946 mas, bmaj=3.123 mas, bpa=-17.29 degrees ! Estimated noise=1.62663 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00961554 Jy ! Component: 100 - total flux cleaned = -0.0092054 Jy ! Component: 150 - total flux cleaned = -0.00817564 Jy ! Component: 200 - total flux cleaned = -0.00744588 Jy ! Total flux subtracted in 200 components = -0.00744588 Jy ! Clean residual min=-0.007595 max=0.007333 Jy/beam ! Clean residual mean=0.000001 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 1.01781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 1.01781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065685Jy sigma=0.973998 ! Fit after self-cal, rms=0.065660Jy sigma=0.973536 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065660Jy sigma=0.973536 ! Fit after self-cal, rms=0.063355Jy sigma=0.939485 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063355Jy sigma=0.939485 ! Fit after self-cal, rms=0.063359Jy sigma=0.939459 ! Inverting map and beam ! Estimated beam: bmin=0.9942 mas, bmaj=3.132 mas, bpa=-17.31 degrees ! Estimated noise=1.62771 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00512464 Jy ! Component: 100 - total flux cleaned = -0.0047006 Jy ! Component: 150 - total flux cleaned = -0.00434662 Jy ! Component: 200 - total flux cleaned = -0.00385603 Jy ! Total flux subtracted in 200 components = -0.00385603 Jy ! Clean residual min=-0.006431 max=0.006518 Jy/beam ! Clean residual mean=-0.000001 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 1.01395 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 1.01395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062576Jy sigma=0.927635 ! Fit after self-cal, rms=0.062563Jy sigma=0.927591 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=3.597 mas, bpa=0.7764 degrees ! Estimated noise=1.93872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140189 Jy ! Component: 100 - total flux cleaned = 0.00169068 Jy ! Component: 150 - total flux cleaned = 0.00173948 Jy ! Component: 200 - total flux cleaned = 0.00174022 Jy ! Total flux subtracted in 200 components = 0.00174022 Jy ! Clean residual min=-0.006673 max=0.006519 Jy/beam ! Clean residual mean=-0.000002 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 1.01569 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 1.01569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062564Jy sigma=0.927578 ! Fit after self-cal, rms=0.062552Jy sigma=0.927495 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=3.077 mas, bpa=-19.47 degrees ! Estimated noise=2.00532 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.804 Jy ! Component: 100 - total flux cleaned = 0.921919 Jy ! Component: 150 - total flux cleaned = 0.965506 Jy ! Component: 200 - total flux cleaned = 0.987981 Jy ! Total flux subtracted in 200 components = 0.987981 Jy ! Clean residual min=-0.009794 max=0.012231 Jy/beam ! Clean residual mean=-0.000018 rms=0.002814 Jy/beam ! Combined flux in latest and established models = 0.987981 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.987981 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9942 mas, bmaj=3.132 mas, bpa=-17.31 degrees ! Estimated noise=1.62771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164584 Jy ! Component: 100 - total flux cleaned = 0.024228 Jy ! Component: 150 - total flux cleaned = 0.0283519 Jy ! Component: 200 - total flux cleaned = 0.0293934 Jy ! Total flux subtracted in 200 components = 0.0293934 Jy ! Clean residual min=-0.006447 max=0.005509 Jy/beam ! Clean residual mean=-0.000002 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 1.01737 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 66 components and 1.01737 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=3.597 mas, bpa=0.7764 degrees ! Estimated noise=1.93872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124019 Jy ! Component: 100 - total flux cleaned = 0.00132464 Jy ! Component: 150 - total flux cleaned = 0.001392 Jy ! Component: 200 - total flux cleaned = 0.00145774 Jy ! Total flux subtracted in 200 components = 0.00145774 Jy ! Clean residual min=-0.005929 max=0.006752 Jy/beam ! Clean residual mean=-0.000000 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 1.01883 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 101 components and 1.01883 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9942 mas, bmaj=3.132 mas, bpa=-17.31 degrees ! Estimated noise=1.62771 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000507197 Jy ! Component: 100 - total flux cleaned = -0.000808026 Jy ! Component: 150 - total flux cleaned = -0.000984904 Jy ! Component: 200 - total flux cleaned = -0.000981676 Jy ! Total flux subtracted in 200 components = -0.000981676 Jy ! Clean residual min=-0.005921 max=0.005722 Jy/beam ! Clean residual mean=-0.000000 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 1.01785 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 113 components and 1.01785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061511Jy sigma=0.913909 ! Fit after self-cal, rms=0.061437Jy sigma=0.912799 wmodel J2101+0341_X_2006_02_16_yyk\_map.mod ! Writing 113 model components to file: J2101+0341_X_2006_02_16_yyk_map.mod wobs J2101+0341_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2101+0341_X_2006_02_16_yyk_uvs.fits wwins J2101+0341_X_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J2101+0341_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014324 Jy ! Component: 100 - total flux cleaned = -0.00210167 Jy ! Component: 150 - total flux cleaned = -0.00243464 Jy ! Component: 200 - total flux cleaned = -0.00259162 Jy ! Component: 250 - total flux cleaned = -0.00280827 Jy ! Component: 300 - total flux cleaned = -0.00307893 Jy ! Component: 350 - total flux cleaned = -0.00340069 Jy ! Component: 400 - total flux cleaned = -0.00382902 Jy ! Component: 450 - total flux cleaned = -0.00412267 Jy ! Component: 500 - total flux cleaned = -0.00446039 Jy ! Component: 550 - total flux cleaned = -0.00489003 Jy ! Component: 600 - total flux cleaned = -0.00519896 Jy ! Component: 650 - total flux cleaned = -0.00549793 Jy ! Component: 700 - total flux cleaned = -0.00573913 Jy ! Component: 750 - total flux cleaned = -0.00597274 Jy ! Component: 800 - total flux cleaned = -0.00610897 Jy ! Component: 850 - total flux cleaned = -0.00633031 Jy ! Component: 900 - total flux cleaned = -0.00645873 Jy ! Component: 950 - total flux cleaned = -0.0065438 Jy ! Component: 1000 - total flux cleaned = -0.00675046 Jy ! Component: 1050 - total flux cleaned = -0.00699152 Jy ! Component: 1100 - total flux cleaned = -0.00710874 Jy ! Component: 1150 - total flux cleaned = -0.00718578 Jy ! Component: 1200 - total flux cleaned = -0.00730081 Jy ! Component: 1250 - total flux cleaned = -0.00748722 Jy ! Component: 1300 - total flux cleaned = -0.00752336 Jy ! Component: 1350 - total flux cleaned = -0.00752353 Jy ! Component: 1400 - total flux cleaned = -0.00752331 Jy ! Component: 1450 - total flux cleaned = -0.00752314 Jy ! Component: 1500 - total flux cleaned = -0.00752268 Jy ! Component: 1550 - total flux cleaned = -0.00745534 Jy ! Component: 1600 - total flux cleaned = -0.00745592 Jy ! Component: 1650 - total flux cleaned = -0.00745604 Jy ! Component: 1700 - total flux cleaned = -0.00752008 Jy ! Component: 1750 - total flux cleaned = -0.00755166 Jy ! Component: 1800 - total flux cleaned = -0.00752031 Jy ! Component: 1850 - total flux cleaned = -0.00751981 Jy ! Component: 1900 - total flux cleaned = -0.00745863 Jy ! Component: 1950 - total flux cleaned = -0.00742808 Jy ! Component: 2000 - total flux cleaned = -0.00739797 Jy ! Total flux subtracted in 2048 components = -0.00739762 Jy ! Clean residual min=-0.001608 max=0.001845 Jy/beam ! Clean residual mean=-0.000004 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 1.01045 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 254 components and 1.01045 Jy ![Exited script file: muppet] wmap "J2101+0341_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9942 x 3.132 at -17.31 degrees (North through East) ! Clean map min=-0.0035598 max=0.90998 Jy/beam ! Writing clean map to FITS file: J2101+0341_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.909983 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000535128 device "J2101+0341_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2101+0341_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.176419 0.176419 0.352838 0.705676 1.41135 2.8227 5.64541 11.2908 22.5816 45.1633 90.3265 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.909 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9942 x 3.132 at -17.31 degrees (North through East) ! Clean map min=-0.0035598 max=0.90998 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2101+0341_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2101+0341_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2101+0341_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:50:48 2006