! Started logfile: J2101+0341_S_2006_02_16_yyk_uvs.log on Wed Jul 5 13:47:39 2006 obs J2101+0341_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2101+0341_S_2006_02_16_yyk_uva.fits ! AN table 1: 263 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.528179 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 25004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2101+0341_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.537232 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=10.95 mas, bpa=-18.57 degrees ! Estimated noise=2.22231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.422985 Jy ! Component: 100 - total flux cleaned = 0.510939 Jy ! Total flux subtracted in 100 components = 0.510939 Jy ! Clean residual min=-0.021920 max=0.037367 Jy/beam ! Clean residual mean=-0.000125 rms=0.008213 Jy/beam ! Combined flux in latest and established models = 0.510939 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.510939 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.136820Jy sigma=1.889083 ! Fit after self-cal, rms=0.136234Jy sigma=1.887220 ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=10.9 mas, bpa=-18.76 degrees ! Estimated noise=2.21812 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=11.48 mas, bpa=-18.86 degrees ! Estimated noise=1.73232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.041437 Jy ! Component: 100 - total flux cleaned = 0.0520524 Jy ! Component: 150 - total flux cleaned = 0.0539978 Jy ! Component: 200 - total flux cleaned = 0.0547037 Jy ! Total flux subtracted in 200 components = 0.0547037 Jy ! Clean residual min=-0.016322 max=0.023376 Jy/beam ! Clean residual mean=-0.000538 rms=0.005779 Jy/beam ! Combined flux in latest and established models = 0.565643 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 35 components and 0.565643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125001Jy sigma=1.695233 ! Fit after self-cal, rms=0.124997Jy sigma=1.695064 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.367 x 11.48 at -18.86 degrees (North through East) ! Clean map min=-0.01602 max=0.48195 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00251 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 0.87 KP 0.94 ! LA 1.18 MK 0.90 NL 1.14 OV 0.95 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.978798 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.88 KP 0.97 ! LA 1.16 MK 1.00 NL 1.22 OV 0.98 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00897 ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.99 HN 0.90 KP 0.94 ! LA 0.91 MK 1.11 NL 1.29 OV 1.00 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03278 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.87 KP 0.86 ! LA 0.78 MK 1.11 NL 1.23 OV 0.89 ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.124997Jy sigma=1.695064 ! Fit after self-cal, rms=0.079813Jy sigma=1.135500 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079813Jy sigma=1.135500 ! Fit after self-cal, rms=0.079899Jy sigma=1.134477 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=11.34 mas, bpa=-18.04 degrees ! Estimated noise=1.73491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000634415 Jy ! Component: 100 - total flux cleaned = -0.000655966 Jy ! Component: 150 - total flux cleaned = -0.000231745 Jy ! Component: 200 - total flux cleaned = 0.000232066 Jy ! Total flux subtracted in 200 components = 0.000232066 Jy ! Clean residual min=-0.005459 max=0.006349 Jy/beam ! Clean residual mean=-0.000184 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.565875 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.565875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079198Jy sigma=1.122949 ! Fit after self-cal, rms=0.079179Jy sigma=1.122900 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079179Jy sigma=1.122900 ! Fit after self-cal, rms=0.071976Jy sigma=0.990789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424792 Jy ! Component: 100 - total flux cleaned = 0.000523355 Jy ! Component: 150 - total flux cleaned = 0.000617243 Jy ! Component: 200 - total flux cleaned = 0.000693514 Jy ! Total flux subtracted in 200 components = 0.000693514 Jy ! Clean residual min=-0.005232 max=0.006094 Jy/beam ! Clean residual mean=-0.000184 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.566568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.566568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071763Jy sigma=0.987284 ! Fit after self-cal, rms=0.071176Jy sigma=0.979642 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 11.34 at -18.04 degrees (North through East) ! Clean map min=-0.0051184 max=0.48698 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071176Jy sigma=0.979642 ! Fit after self-cal, rms=0.067659Jy sigma=0.918429 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067659Jy sigma=0.918429 ! Fit after self-cal, rms=0.067573Jy sigma=0.917803 ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=11.34 mas, bpa=-18.05 degrees ! Estimated noise=1.73233 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00284222 Jy ! Component: 100 - total flux cleaned = -0.00300017 Jy ! Component: 150 - total flux cleaned = -0.00313027 Jy ! Component: 200 - total flux cleaned = -0.00318543 Jy ! Total flux subtracted in 200 components = -0.00318543 Jy ! Clean residual min=-0.005317 max=0.006291 Jy/beam ! Clean residual mean=-0.000163 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.563383 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.563383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067424Jy sigma=0.914699 ! Fit after self-cal, rms=0.067395Jy sigma=0.914580 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067395Jy sigma=0.914580 ! Fit after self-cal, rms=0.066007Jy sigma=0.896445 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066007Jy sigma=0.896445 ! Fit after self-cal, rms=0.066007Jy sigma=0.896444 ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=11.33 mas, bpa=-18.04 degrees ! Estimated noise=1.73399 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110163 Jy ! Component: 100 - total flux cleaned = -0.0013012 Jy ! Component: 150 - total flux cleaned = -0.00135726 Jy ! Component: 200 - total flux cleaned = -0.00150438 Jy ! Total flux subtracted in 200 components = -0.00150438 Jy ! Clean residual min=-0.005199 max=0.006236 Jy/beam ! Clean residual mean=-0.000167 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.561878 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.561878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065899Jy sigma=0.894614 ! Fit after self-cal, rms=0.065893Jy sigma=0.894577 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.276 mas, bmaj=12.74 mas, bpa=1.389 degrees ! Estimated noise=2.08723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552834 Jy ! Component: 100 - total flux cleaned = -0.000590733 Jy ! Component: 150 - total flux cleaned = -0.000587502 Jy ! Component: 200 - total flux cleaned = -0.000588395 Jy ! Total flux subtracted in 200 components = -0.000588395 Jy ! Clean residual min=-0.006222 max=0.006891 Jy/beam ! Clean residual mean=-0.000293 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.56129 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.56129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065856Jy sigma=0.894497 ! Fit after self-cal, rms=0.065842Jy sigma=0.894438 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=10.71 mas, bpa=-18.6 degrees ! Estimated noise=2.23885 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.423456 Jy ! Component: 100 - total flux cleaned = 0.507324 Jy ! Component: 150 - total flux cleaned = 0.54054 Jy ! Component: 200 - total flux cleaned = 0.554959 Jy ! Total flux subtracted in 200 components = 0.554959 Jy ! Clean residual min=-0.006472 max=0.006867 Jy/beam ! Clean residual mean=-0.000068 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 0.55496 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.55496 Jy ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=11.33 mas, bpa=-18.04 degrees ! Estimated noise=1.73399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00682191 Jy ! Component: 100 - total flux cleaned = 0.0068096 Jy ! Component: 150 - total flux cleaned = 0.0069627 Jy ! Component: 200 - total flux cleaned = 0.00696955 Jy ! Total flux subtracted in 200 components = 0.00696955 Jy ! Clean residual min=-0.005796 max=0.006168 Jy/beam ! Clean residual mean=-0.000172 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.561929 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.561929 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.276 mas, bmaj=12.74 mas, bpa=1.389 degrees ! Estimated noise=2.08723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000931839 Jy ! Component: 100 - total flux cleaned = -0.00100604 Jy ! Component: 150 - total flux cleaned = -0.00100006 Jy ! Component: 200 - total flux cleaned = -0.000998973 Jy ! Total flux subtracted in 200 components = -0.000998973 Jy ! Clean residual min=-0.006346 max=0.006702 Jy/beam ! Clean residual mean=-0.000291 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 0.56093 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.56093 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=11.33 mas, bpa=-18.04 degrees ! Estimated noise=1.73399 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932498 Jy ! Component: 100 - total flux cleaned = 0.000749449 Jy ! Component: 150 - total flux cleaned = 0.000701096 Jy ! Component: 200 - total flux cleaned = 0.000699966 Jy ! Total flux subtracted in 200 components = 0.000699966 Jy ! Clean residual min=-0.005177 max=0.006141 Jy/beam ! Clean residual mean=-0.000165 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.56163 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.56163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065839Jy sigma=0.894441 ! Fit after self-cal, rms=0.065819Jy sigma=0.894319 wmodel J2101+0341_S_2006_02_16_yyk\_map.mod ! Writing 70 model components to file: J2101+0341_S_2006_02_16_yyk_map.mod wobs J2101+0341_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2101+0341_S_2006_02_16_yyk_uvs.fits wwins J2101+0341_S_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J2101+0341_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000960388 Jy ! Component: 100 - total flux cleaned = 0.00122077 Jy ! Component: 150 - total flux cleaned = 0.00145698 Jy ! Component: 200 - total flux cleaned = 0.00159949 Jy ! Component: 250 - total flux cleaned = 0.00214546 Jy ! Component: 300 - total flux cleaned = 0.00272069 Jy ! Component: 350 - total flux cleaned = 0.00290282 Jy ! Component: 400 - total flux cleaned = 0.00307453 Jy ! Component: 450 - total flux cleaned = 0.00329547 Jy ! Component: 500 - total flux cleaned = 0.00350568 Jy ! Component: 550 - total flux cleaned = 0.00365761 Jy ! Component: 600 - total flux cleaned = 0.00399946 Jy ! Component: 650 - total flux cleaned = 0.00418708 Jy ! Component: 700 - total flux cleaned = 0.00436857 Jy ! Component: 750 - total flux cleaned = 0.00450116 Jy ! Component: 800 - total flux cleaned = 0.00484141 Jy ! Component: 850 - total flux cleaned = 0.00500435 Jy ! Component: 900 - total flux cleaned = 0.00504371 Jy ! Component: 950 - total flux cleaned = 0.00512183 Jy ! Component: 1000 - total flux cleaned = 0.00523629 Jy ! Component: 1050 - total flux cleaned = 0.00531027 Jy ! Component: 1100 - total flux cleaned = 0.00534685 Jy ! Component: 1150 - total flux cleaned = 0.00534676 Jy ! Component: 1200 - total flux cleaned = 0.00548712 Jy ! Component: 1250 - total flux cleaned = 0.00555567 Jy ! Component: 1300 - total flux cleaned = 0.00562254 Jy ! Component: 1350 - total flux cleaned = 0.00562256 Jy ! Component: 1400 - total flux cleaned = 0.00565559 Jy ! Component: 1450 - total flux cleaned = 0.00565604 Jy ! Component: 1500 - total flux cleaned = 0.00568788 Jy ! Component: 1550 - total flux cleaned = 0.00568807 Jy ! Component: 1600 - total flux cleaned = 0.00565813 Jy ! Component: 1650 - total flux cleaned = 0.00574728 Jy ! Component: 1700 - total flux cleaned = 0.00568849 Jy ! Component: 1750 - total flux cleaned = 0.0057173 Jy ! Component: 1800 - total flux cleaned = 0.00571738 Jy ! Component: 1850 - total flux cleaned = 0.00571761 Jy ! Component: 1900 - total flux cleaned = 0.00577281 Jy ! Component: 1950 - total flux cleaned = 0.00582728 Jy ! Component: 2000 - total flux cleaned = 0.00574704 Jy ! Total flux subtracted in 2048 components = 0.00572107 Jy ! Clean residual min=-0.001671 max=0.001491 Jy/beam ! Clean residual mean=-0.000034 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.567351 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 207 components and 0.567352 Jy ![Exited script file: muppet] wmap "J2101+0341_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 11.33 at -18.04 degrees (North through East) ! Clean map min=-0.0036208 max=0.48732 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.487323 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000577541 device "J2101+0341_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2101+0341_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.355538 0.355538 0.711077 1.42215 2.84431 5.68862 11.3772 22.7545 45.5089 91.0178 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.487 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 11.33 at -18.04 degrees (North through East) ! Clean map min=-0.0036208 max=0.48732 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2101+0341_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2101+0341_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2101+0341_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:48:24 2006