! Started logfile: J2101+0341_S_2006_02_14_yyk_uvs.log on Wed Jul 5 13:46:52 2006 obs J2101+0341_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J2101+0341_S_2006_02_14_yyk_uva.fits ! AN table 1: 277 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.645407 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 32180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2101+0341_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.554648 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=6.715 mas, bpa=-5.234 degrees ! Estimated noise=2.18772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.454582 Jy ! Component: 100 - total flux cleaned = 0.547423 Jy ! Total flux subtracted in 100 components = 0.547423 Jy ! Clean residual min=-0.016919 max=0.027400 Jy/beam ! Clean residual mean=-0.000118 rms=0.005550 Jy/beam ! Combined flux in latest and established models = 0.547423 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.547423 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.120929Jy sigma=1.571837 ! Fit after self-cal, rms=0.120694Jy sigma=1.569747 ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.719 mas, bpa=-5.175 degrees ! Estimated noise=2.22524 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.918 mas, bpa=-7.501 degrees ! Estimated noise=1.63586 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277135 Jy ! Component: 100 - total flux cleaned = 0.0369266 Jy ! Component: 150 - total flux cleaned = 0.0386174 Jy ! Component: 200 - total flux cleaned = 0.0394854 Jy ! Total flux subtracted in 200 components = 0.0394854 Jy ! Clean residual min=-0.014250 max=0.015670 Jy/beam ! Clean residual mean=-0.000546 rms=0.003671 Jy/beam ! Combined flux in latest and established models = 0.586909 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 38 components and 0.586909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115209Jy sigma=1.486324 ! Fit after self-cal, rms=0.115038Jy sigma=1.485262 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.01 x 7.918 at -7.501 degrees (North through East) ! Clean map min=-0.01341 max=0.52167 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01492 ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.95 HN 1.05 KP 0.97 ! LA 1.23 MK 0.90 NL 0.94 OV 0.96 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.981507 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.05 KP 0.99 ! LA 1.19 MK 0.97 NL 0.94 OV 1.03 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.974538 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.04 KP 0.97 ! LA 0.95 MK 1.06 NL 1.08 OV 1.01 ! PT 1.10 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0394 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.93 KP 0.88 ! LA 0.79 MK 1.08 NL 0.98 OV 0.88 ! PT 0.94 SC 1.13 ! ! ! Fit before self-cal, rms=0.115038Jy sigma=1.485262 ! Fit after self-cal, rms=0.090130Jy sigma=1.113430 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090130Jy sigma=1.113430 ! Fit after self-cal, rms=0.090113Jy sigma=1.113204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.977 mas, bpa=-7.905 degrees ! Estimated noise=1.63169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281878 Jy ! Component: 100 - total flux cleaned = 0.0036107 Jy ! Component: 150 - total flux cleaned = 0.00398948 Jy ! Component: 200 - total flux cleaned = 0.00416117 Jy ! Total flux subtracted in 200 components = 0.00416117 Jy ! Clean residual min=-0.006608 max=0.007030 Jy/beam ! Clean residual mean=-0.000019 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.59107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.59107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090111Jy sigma=1.108837 ! Fit after self-cal, rms=0.089977Jy sigma=1.108292 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089977Jy sigma=1.108292 ! Fit after self-cal, rms=0.084603Jy sigma=1.040480 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834516 Jy ! Component: 100 - total flux cleaned = 0.000913937 Jy ! Component: 150 - total flux cleaned = 0.00111566 Jy ! Component: 200 - total flux cleaned = 0.0012361 Jy ! Total flux subtracted in 200 components = 0.0012361 Jy ! Clean residual min=-0.006229 max=0.006856 Jy/beam ! Clean residual mean=-0.000021 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.592306 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.592306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084562Jy sigma=1.038703 ! Fit after self-cal, rms=0.083800Jy sigma=1.032203 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.977 at -7.905 degrees (North through East) ! Clean map min=-0.0056069 max=0.52363 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083800Jy sigma=1.032203 ! Fit after self-cal, rms=0.078323Jy sigma=0.934075 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078323Jy sigma=0.934075 ! Fit after self-cal, rms=0.078224Jy sigma=0.933278 ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.938 mas, bpa=-7.92 degrees ! Estimated noise=1.62858 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000966657 Jy ! Component: 100 - total flux cleaned = 0.00122607 Jy ! Component: 150 - total flux cleaned = 0.00151942 Jy ! Component: 200 - total flux cleaned = 0.00164776 Jy ! Total flux subtracted in 200 components = 0.00164776 Jy ! Clean residual min=-0.005197 max=0.005907 Jy/beam ! Clean residual mean=-0.000004 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.593954 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.593954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078132Jy sigma=0.930887 ! Fit after self-cal, rms=0.078103Jy sigma=0.930682 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078103Jy sigma=0.930682 ! Fit after self-cal, rms=0.077028Jy sigma=0.907463 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077028Jy sigma=0.907463 ! Fit after self-cal, rms=0.077024Jy sigma=0.907445 ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=7.924 mas, bpa=-7.914 degrees ! Estimated noise=1.62416 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.14134e-05 Jy ! Component: 100 - total flux cleaned = 0.00024443 Jy ! Component: 150 - total flux cleaned = 0.000480894 Jy ! Component: 200 - total flux cleaned = 0.000636434 Jy ! Total flux subtracted in 200 components = 0.000636434 Jy ! Clean residual min=-0.004736 max=0.005623 Jy/beam ! Clean residual mean=0.000002 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.59459 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.59459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076948Jy sigma=0.905910 ! Fit after self-cal, rms=0.076936Jy sigma=0.905859 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.759 mas, bmaj=12.31 mas, bpa=4.667 degrees ! Estimated noise=2.09628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000923732 Jy ! Component: 100 - total flux cleaned = 0.000886319 Jy ! Component: 150 - total flux cleaned = 0.000908868 Jy ! Component: 200 - total flux cleaned = 0.000912115 Jy ! Total flux subtracted in 200 components = 0.000912115 Jy ! Clean residual min=-0.005802 max=0.007211 Jy/beam ! Clean residual mean=0.000007 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.595502 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.595502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076950Jy sigma=0.905789 ! Fit after self-cal, rms=0.076920Jy sigma=0.905621 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.581 mas, bmaj=6.722 mas, bpa=-5.344 degrees ! Estimated noise=2.19128 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.447565 Jy ! Component: 100 - total flux cleaned = 0.53588 Jy ! Component: 150 - total flux cleaned = 0.563742 Jy ! Component: 200 - total flux cleaned = 0.576537 Jy ! Total flux subtracted in 200 components = 0.576537 Jy ! Clean residual min=-0.007903 max=0.007676 Jy/beam ! Clean residual mean=-0.000002 rms=0.002173 Jy/beam ! Combined flux in latest and established models = 0.576537 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.576537 Jy ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=7.924 mas, bpa=-7.914 degrees ! Estimated noise=1.62416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111312 Jy ! Component: 100 - total flux cleaned = 0.0159297 Jy ! Component: 150 - total flux cleaned = 0.0173435 Jy ! Component: 200 - total flux cleaned = 0.0178718 Jy ! Total flux subtracted in 200 components = 0.0178718 Jy ! Clean residual min=-0.005098 max=0.005940 Jy/beam ! Clean residual mean=0.000003 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.594408 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.594409 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.759 mas, bmaj=12.31 mas, bpa=4.667 degrees ! Estimated noise=2.09628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100157 Jy ! Component: 100 - total flux cleaned = 0.00116591 Jy ! Component: 150 - total flux cleaned = 0.00116251 Jy ! Component: 200 - total flux cleaned = 0.00112418 Jy ! Total flux subtracted in 200 components = 0.00112418 Jy ! Clean residual min=-0.005838 max=0.007164 Jy/beam ! Clean residual mean=0.000006 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.595533 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.595533 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=7.924 mas, bpa=-7.914 degrees ! Estimated noise=1.62416 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225912 Jy ! Component: 100 - total flux cleaned = -0.000107537 Jy ! Component: 150 - total flux cleaned = -1.00477e-05 Jy ! Component: 200 - total flux cleaned = 7.14815e-05 Jy ! Total flux subtracted in 200 components = 7.14815e-05 Jy ! Clean residual min=-0.004986 max=0.005712 Jy/beam ! Clean residual mean=-0.000001 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.595604 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.595604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076836Jy sigma=0.904038 ! Fit after self-cal, rms=0.076828Jy sigma=0.903909 wmodel J2101+0341_S_2006_02_14_yyk\_map.mod ! Writing 66 model components to file: J2101+0341_S_2006_02_14_yyk_map.mod wobs J2101+0341_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J2101+0341_S_2006_02_14_yyk_uvs.fits wwins J2101+0341_S_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J2101+0341_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752405 Jy ! Component: 100 - total flux cleaned = 0.000582778 Jy ! Component: 150 - total flux cleaned = 0.000111448 Jy ! Component: 200 - total flux cleaned = -4.04889e-05 Jy ! Component: 250 - total flux cleaned = -0.000255531 Jy ! Component: 300 - total flux cleaned = -0.000190111 Jy ! Component: 350 - total flux cleaned = -0.000386024 Jy ! Component: 400 - total flux cleaned = -0.000384024 Jy ! Component: 450 - total flux cleaned = -0.000265199 Jy ! Component: 500 - total flux cleaned = -0.000499534 Jy ! Component: 550 - total flux cleaned = -0.000443712 Jy ! Component: 600 - total flux cleaned = -0.00071448 Jy ! Component: 650 - total flux cleaned = -0.000870655 Jy ! Component: 700 - total flux cleaned = -0.000971366 Jy ! Component: 750 - total flux cleaned = -0.00107091 Jy ! Component: 800 - total flux cleaned = -0.00131108 Jy ! Component: 850 - total flux cleaned = -0.00140317 Jy ! Component: 900 - total flux cleaned = -0.00153996 Jy ! Component: 950 - total flux cleaned = -0.00158365 Jy ! Component: 1000 - total flux cleaned = -0.00180177 Jy ! Component: 1050 - total flux cleaned = -0.00188797 Jy ! Component: 1100 - total flux cleaned = -0.00205375 Jy ! Component: 1150 - total flux cleaned = -0.00229812 Jy ! Component: 1200 - total flux cleaned = -0.00241778 Jy ! Component: 1250 - total flux cleaned = -0.00257529 Jy ! Component: 1300 - total flux cleaned = -0.00276881 Jy ! Component: 1350 - total flux cleaned = -0.00295866 Jy ! Component: 1400 - total flux cleaned = -0.00318252 Jy ! Component: 1450 - total flux cleaned = -0.00332879 Jy ! Component: 1500 - total flux cleaned = -0.00350941 Jy ! Component: 1550 - total flux cleaned = -0.00358016 Jy ! Component: 1600 - total flux cleaned = -0.00361524 Jy ! Component: 1650 - total flux cleaned = -0.00382247 Jy ! Component: 1700 - total flux cleaned = -0.00389045 Jy ! Component: 1750 - total flux cleaned = -0.0040248 Jy ! Component: 1800 - total flux cleaned = -0.00409125 Jy ! Component: 1850 - total flux cleaned = -0.0042866 Jy ! Component: 1900 - total flux cleaned = -0.00435115 Jy ! Component: 1950 - total flux cleaned = -0.00450949 Jy ! Component: 2000 - total flux cleaned = -0.00460367 Jy ! Total flux subtracted in 2048 components = -0.00478906 Jy ! Clean residual min=-0.001940 max=0.001940 Jy/beam ! Clean residual mean=-0.000009 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.590815 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 193 components and 0.590815 Jy ![Exited script file: muppet] wmap "J2101+0341_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 7.924 at -7.914 degrees (North through East) ! Clean map min=-0.0048923 max=0.51978 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.519782 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061374 device "J2101+0341_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J2101+0341_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354229 0.354229 0.708458 1.41692 2.83383 5.66767 11.3353 22.6707 45.3413 90.6827 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.519 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 7.924 at -7.914 degrees (North through East) ! Clean map min=-0.0048923 max=0.51978 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2101+0341_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J2101+0341_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2101+0341_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 13:47:38 2006