! Started logfile: J2042+7508_X_2006_02_16_yyk_uvs.log on Wed Jul 5 13:45:17 2006 obs J2042+7508_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2042+7508_X_2006_02_16_yyk_uva.fits ! AN table 1: 883 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994639 visibilities/baseline/integration-bin. ! Found source: J2042+7508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2424 lines of history. ! ! Reading 158088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2042+7508_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.154935 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5917 mas, bmaj=2.72 mas, bpa=5.055 degrees ! Estimated noise=1.15606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102582 Jy ! Component: 100 - total flux cleaned = 0.138761 Jy ! Total flux subtracted in 100 components = 0.138761 Jy ! Clean residual min=-0.010055 max=0.015432 Jy/beam ! Clean residual mean=-0.000025 rms=0.002883 Jy/beam ! Combined flux in latest and established models = 0.138761 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.138761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080550Jy sigma=1.609653 ! Fit after self-cal, rms=0.079824Jy sigma=1.591713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8303 mas, bmaj=2.848 mas, bpa=4.376 degrees ! Estimated noise=0.642342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.024712 Jy ! Component: 100 - total flux cleaned = 0.0349801 Jy ! Component: 150 - total flux cleaned = 0.0407429 Jy ! Component: 200 - total flux cleaned = 0.0442669 Jy ! Total flux subtracted in 200 components = 0.0442669 Jy ! Clean residual min=-0.007851 max=0.014207 Jy/beam ! Clean residual mean=-0.000026 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.183028 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.183028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075281Jy sigma=1.482009 ! Fit after self-cal, rms=0.075133Jy sigma=1.480261 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8303 x 2.848 at 4.376 degrees (North through East) ! Clean map min=-0.0077966 max=0.12752 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.075133Jy sigma=1.480261 ! Fit after self-cal, rms=0.075133Jy sigma=1.480261 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075133Jy sigma=1.480261 ! Fit after self-cal, rms=0.075132Jy sigma=1.480259 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8303 mas, bmaj=2.848 mas, bpa=4.376 degrees ! Estimated noise=0.642342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129869 Jy ! Component: 100 - total flux cleaned = 0.0139921 Jy ! Component: 150 - total flux cleaned = 0.0142744 Jy ! Component: 200 - total flux cleaned = 0.0140657 Jy ! Total flux subtracted in 200 components = 0.0140657 Jy ! Clean residual min=-0.006377 max=0.007194 Jy/beam ! Clean residual mean=-0.000007 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.197093 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.197093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072626Jy sigma=1.424796 ! Fit after self-cal, rms=0.072530Jy sigma=1.422869 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072530Jy sigma=1.422869 ! Fit after self-cal, rms=0.054569Jy sigma=1.045308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011349 Jy ! Component: 100 - total flux cleaned = 0.0165709 Jy ! Component: 150 - total flux cleaned = 0.0176054 Jy ! Component: 200 - total flux cleaned = 0.0174759 Jy ! Total flux subtracted in 200 components = 0.0174759 Jy ! Clean residual min=-0.005078 max=0.005040 Jy/beam ! Clean residual mean=-0.000013 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.214569 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 95 components and 0.214569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052522Jy sigma=1.004492 ! Fit after self-cal, rms=0.052291Jy sigma=0.999509 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8303 x 2.848 at 4.376 degrees (North through East) ! Clean map min=-0.0061795 max=0.12799 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052291Jy sigma=0.999509 ! Fit after self-cal, rms=0.050695Jy sigma=0.976595 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050695Jy sigma=0.976595 ! Fit after self-cal, rms=0.050672Jy sigma=0.976205 ! Inverting map and beam ! Estimated beam: bmin=0.8186 mas, bmaj=2.832 mas, bpa=4.451 degrees ! Estimated noise=0.634477 mJy/beam. ! Added new window around map position (2.2, -6.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311045 Jy ! Component: 100 - total flux cleaned = 0.00385503 Jy ! Component: 150 - total flux cleaned = 0.00435445 Jy ! Component: 200 - total flux cleaned = 0.00485562 Jy ! Total flux subtracted in 200 components = 0.00485562 Jy ! Clean residual min=-0.003307 max=0.003254 Jy/beam ! Clean residual mean=-0.000005 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.219425 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 135 components and 0.219425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050336Jy sigma=0.968199 ! Fit after self-cal, rms=0.050324Jy sigma=0.967902 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050324Jy sigma=0.967902 ! Fit after self-cal, rms=0.048775Jy sigma=0.942074 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048775Jy sigma=0.942074 ! Fit after self-cal, rms=0.048773Jy sigma=0.941903 ! Inverting map and beam ! Estimated beam: bmin=0.8068 mas, bmaj=2.836 mas, bpa=4.544 degrees ! Estimated noise=0.630834 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033115 Jy ! Component: 100 - total flux cleaned = 0.000784358 Jy ! Component: 150 - total flux cleaned = 0.00118784 Jy ! Component: 200 - total flux cleaned = 0.00150205 Jy ! Total flux subtracted in 200 components = 0.00150205 Jy ! Clean residual min=-0.002835 max=0.002496 Jy/beam ! Clean residual mean=-0.000005 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.220927 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 169 components and 0.220927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048651Jy sigma=0.939432 ! Fit after self-cal, rms=0.048649Jy sigma=0.939346 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=3.267 mas, bpa=4.214 degrees ! Estimated noise=0.83945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058587 Jy ! Component: 100 - total flux cleaned = 0.000894368 Jy ! Component: 150 - total flux cleaned = 0.00119706 Jy ! Component: 200 - total flux cleaned = 0.00128642 Jy ! Total flux subtracted in 200 components = 0.00128642 Jy ! Clean residual min=-0.003874 max=0.003051 Jy/beam ! Clean residual mean=-0.000003 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.222213 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 193 components and 0.222213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048629Jy sigma=0.938766 ! Fit after self-cal, rms=0.048625Jy sigma=0.938677 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5827 mas, bmaj=2.732 mas, bpa=5.1 degrees ! Estimated noise=1.11652 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.108168 Jy ! Component: 100 - total flux cleaned = 0.146277 Jy ! Component: 150 - total flux cleaned = 0.166751 Jy ! Component: 200 - total flux cleaned = 0.1802 Jy ! Total flux subtracted in 200 components = 0.1802 Jy ! Clean residual min=-0.005823 max=0.005890 Jy/beam ! Clean residual mean=-0.000018 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.1802 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.1802 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8068 mas, bmaj=2.836 mas, bpa=4.544 degrees ! Estimated noise=0.630834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142813 Jy ! Component: 100 - total flux cleaned = 0.0231343 Jy ! Component: 150 - total flux cleaned = 0.0295032 Jy ! Component: 200 - total flux cleaned = 0.0343038 Jy ! Total flux subtracted in 200 components = 0.0343038 Jy ! Clean residual min=-0.003936 max=0.003509 Jy/beam ! Clean residual mean=-0.000017 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.214504 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 88 components and 0.214504 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=3.267 mas, bpa=4.214 degrees ! Estimated noise=0.83945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631744 Jy ! Component: 100 - total flux cleaned = 0.00833639 Jy ! Component: 150 - total flux cleaned = 0.00906156 Jy ! Component: 200 - total flux cleaned = 0.00942996 Jy ! Total flux subtracted in 200 components = 0.00942996 Jy ! Clean residual min=-0.004388 max=0.003418 Jy/beam ! Clean residual mean=-0.000003 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.223934 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 142 components and 0.223934 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8068 mas, bmaj=2.836 mas, bpa=4.544 degrees ! Estimated noise=0.630834 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387212 Jy ! Component: 100 - total flux cleaned = 3.78503e-05 Jy ! Component: 150 - total flux cleaned = 0.000391375 Jy ! Component: 200 - total flux cleaned = 0.000647258 Jy ! Total flux subtracted in 200 components = 0.000647258 Jy ! Clean residual min=-0.002740 max=0.002353 Jy/beam ! Clean residual mean=-0.000001 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.224581 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 168 components and 0.224581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048665Jy sigma=0.940157 ! Fit after self-cal, rms=0.048645Jy sigma=0.939839 wmodel J2042+7508_X_2006_02_16_yyk\_map.mod ! Writing 168 model components to file: J2042+7508_X_2006_02_16_yyk_map.mod wobs J2042+7508_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2042+7508_X_2006_02_16_yyk_uvs.fits wwins J2042+7508_X_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J2042+7508_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012518 Jy ! Component: 100 - total flux cleaned = -0.00181697 Jy ! Component: 150 - total flux cleaned = -0.00197725 Jy ! Component: 200 - total flux cleaned = -0.00205262 Jy ! Component: 250 - total flux cleaned = -0.00201598 Jy ! Component: 300 - total flux cleaned = -0.00194582 Jy ! Component: 350 - total flux cleaned = -0.00187687 Jy ! Component: 400 - total flux cleaned = -0.00177865 Jy ! Component: 450 - total flux cleaned = -0.00171561 Jy ! Component: 500 - total flux cleaned = -0.00156358 Jy ! Component: 550 - total flux cleaned = -0.00156478 Jy ! Component: 600 - total flux cleaned = -0.00156422 Jy ! Component: 650 - total flux cleaned = -0.00162135 Jy ! Component: 700 - total flux cleaned = -0.00175859 Jy ! Component: 750 - total flux cleaned = -0.00178572 Jy ! Component: 800 - total flux cleaned = -0.0018907 Jy ! Component: 850 - total flux cleaned = -0.00189119 Jy ! Component: 900 - total flux cleaned = -0.00196653 Jy ! Component: 950 - total flux cleaned = -0.00199092 Jy ! Component: 1000 - total flux cleaned = -0.0019909 Jy ! Component: 1050 - total flux cleaned = -0.00206133 Jy ! Component: 1100 - total flux cleaned = -0.00203808 Jy ! Component: 1150 - total flux cleaned = -0.00206123 Jy ! Component: 1200 - total flux cleaned = -0.00208337 Jy ! Component: 1250 - total flux cleaned = -0.00208302 Jy ! Component: 1300 - total flux cleaned = -0.00206104 Jy ! Component: 1350 - total flux cleaned = -0.00201831 Jy ! Component: 1400 - total flux cleaned = -0.00201803 Jy ! Component: 1450 - total flux cleaned = -0.00195677 Jy ! Component: 1500 - total flux cleaned = -0.00199667 Jy ! Component: 1550 - total flux cleaned = -0.00201655 Jy ! Component: 1600 - total flux cleaned = -0.00195845 Jy ! Component: 1650 - total flux cleaned = -0.0019967 Jy ! Component: 1700 - total flux cleaned = -0.00207138 Jy ! Component: 1750 - total flux cleaned = -0.00210796 Jy ! Component: 1800 - total flux cleaned = -0.00207121 Jy ! Component: 1850 - total flux cleaned = -0.00216136 Jy ! Component: 1900 - total flux cleaned = -0.00226815 Jy ! Component: 1950 - total flux cleaned = -0.00237351 Jy ! Component: 2000 - total flux cleaned = -0.00240829 Jy ! Total flux subtracted in 2048 components = -0.0025113 Jy ! Clean residual min=-0.000931 max=0.001041 Jy/beam ! Clean residual mean=0.000000 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.22207 Jy keep ! Adding 184 model components to the UV plane model. ! The established model now contains 352 components and 0.22207 Jy ![Exited script file: muppet] wmap "J2042+7508_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8068 x 2.836 at 4.544 degrees (North through East) ! Clean map min=-0.002231 max=0.12387 Jy/beam ! Writing clean map to FITS file: J2042+7508_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123872 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000335391 device "J2042+7508_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2042+7508_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.812265 0.812265 1.62453 3.24906 6.49812 12.9962 25.9925 51.985 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8068 x 2.836 at 4.544 degrees (North through East) ! Clean map min=-0.002231 max=0.12387 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2042+7508_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2042+7508_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2042+7508_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:45:55 2006