! Started logfile: J2042+7508_S_2006_02_16_yyk_uvs.log on Wed Jul 5 13:44:30 2006 obs J2042+7508_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2042+7508_S_2006_02_16_yyk_uva.fits ! AN table 1: 883 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994639 visibilities/baseline/integration-bin. ! Found source: J2042+7508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2424 lines of history. ! ! Reading 158088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2042+7508_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.207774 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=10.55 mas, bpa=5.798 degrees ! Estimated noise=1.07503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.158021 Jy ! Component: 100 - total flux cleaned = 0.191355 Jy ! Total flux subtracted in 100 components = 0.191355 Jy ! Clean residual min=-0.010002 max=0.016950 Jy/beam ! Clean residual mean=0.000029 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 0.191355 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.191355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078249Jy sigma=1.319826 ! Fit after self-cal, rms=0.078179Jy sigma=1.315855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=10.6 mas, bpa=5.719 degrees ! Estimated noise=0.692285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138756 Jy ! Component: 100 - total flux cleaned = 0.020692 Jy ! Component: 150 - total flux cleaned = 0.0247945 Jy ! Component: 200 - total flux cleaned = 0.0259438 Jy ! Total flux subtracted in 200 components = 0.0259438 Jy ! Clean residual min=-0.005947 max=0.012689 Jy/beam ! Clean residual mean=-0.000084 rms=0.002410 Jy/beam ! Combined flux in latest and established models = 0.217299 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.217299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076046Jy sigma=1.277305 ! Fit after self-cal, rms=0.076006Jy sigma=1.276648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.077 x 10.6 at 5.719 degrees (North through East) ! Clean map min=-0.0059813 max=0.18622 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.076006Jy sigma=1.276648 ! Fit after self-cal, rms=0.076006Jy sigma=1.276648 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076006Jy sigma=1.276648 ! Fit after self-cal, rms=0.076006Jy sigma=1.276648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=10.6 mas, bpa=5.719 degrees ! Estimated noise=0.692285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108713 Jy ! Component: 100 - total flux cleaned = 0.0115678 Jy ! Component: 150 - total flux cleaned = 0.0115667 Jy ! Component: 200 - total flux cleaned = 0.0118279 Jy ! Total flux subtracted in 200 components = 0.0118279 Jy ! Clean residual min=-0.006183 max=0.009041 Jy/beam ! Clean residual mean=-0.000106 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.229127 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 67 components and 0.229127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073986Jy sigma=1.243855 ! Fit after self-cal, rms=0.073861Jy sigma=1.240675 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073861Jy sigma=1.240675 ! Fit after self-cal, rms=0.066413Jy sigma=1.107267 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036133 Jy ! Component: 100 - total flux cleaned = 0.00372217 Jy ! Component: 150 - total flux cleaned = 0.00363236 Jy ! Component: 200 - total flux cleaned = 0.00355383 Jy ! Total flux subtracted in 200 components = 0.00355383 Jy ! Clean residual min=-0.006297 max=0.007089 Jy/beam ! Clean residual mean=-0.000111 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.232681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 104 components and 0.232681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065884Jy sigma=1.100528 ! Fit after self-cal, rms=0.065765Jy sigma=1.097418 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.077 x 10.6 at 5.719 degrees (North through East) ! Clean map min=-0.0061107 max=0.18364 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065765Jy sigma=1.097418 ! Fit after self-cal, rms=0.065622Jy sigma=1.085554 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065622Jy sigma=1.085554 ! Fit after self-cal, rms=0.065616Jy sigma=1.085371 ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=10.59 mas, bpa=5.754 degrees ! Estimated noise=0.699101 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033919 Jy ! Component: 100 - total flux cleaned = 0.0043065 Jy ! Component: 150 - total flux cleaned = 0.00458837 Jy ! Component: 200 - total flux cleaned = 0.00471153 Jy ! Total flux subtracted in 200 components = 0.00471153 Jy ! Clean residual min=-0.005894 max=0.005468 Jy/beam ! Clean residual mean=-0.000091 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.237392 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 135 components and 0.237392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065241Jy sigma=1.081771 ! Fit after self-cal, rms=0.065242Jy sigma=1.081475 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065242Jy sigma=1.081475 ! Fit after self-cal, rms=0.064683Jy sigma=1.067075 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064683Jy sigma=1.067075 ! Fit after self-cal, rms=0.064682Jy sigma=1.067048 ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=10.58 mas, bpa=5.718 degrees ! Estimated noise=0.702136 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268028 Jy ! Component: 100 - total flux cleaned = 0.00358032 Jy ! Component: 150 - total flux cleaned = 0.00374861 Jy ! Component: 200 - total flux cleaned = 0.00379579 Jy ! Total flux subtracted in 200 components = 0.00379579 Jy ! Clean residual min=-0.005652 max=0.005247 Jy/beam ! Clean residual mean=-0.000071 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.241188 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 150 components and 0.241188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064430Jy sigma=1.064741 ! Fit after self-cal, rms=0.064435Jy sigma=1.064565 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.408 mas, bmaj=11.53 mas, bpa=6.954 degrees ! Estimated noise=0.907748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810536 Jy ! Component: 100 - total flux cleaned = 0.00111978 Jy ! Component: 150 - total flux cleaned = 0.00129701 Jy ! Component: 200 - total flux cleaned = 0.00129878 Jy ! Total flux subtracted in 200 components = 0.00129878 Jy ! Clean residual min=-0.006247 max=0.005376 Jy/beam ! Clean residual mean=-0.000150 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.242487 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 175 components and 0.242487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064382Jy sigma=1.065201 ! Fit after self-cal, rms=0.064364Jy sigma=1.064730 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.318 mas, bmaj=10.54 mas, bpa=5.771 degrees ! Estimated noise=1.07711 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.161007 Jy ! Component: 100 - total flux cleaned = 0.198667 Jy ! Component: 150 - total flux cleaned = 0.216893 Jy ! Component: 200 - total flux cleaned = 0.226909 Jy ! Total flux subtracted in 200 components = 0.226909 Jy ! Clean residual min=-0.007048 max=0.007791 Jy/beam ! Clean residual mean=-0.000027 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.226909 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.226909 Jy ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=10.58 mas, bpa=5.718 degrees ! Estimated noise=0.702136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741108 Jy ! Component: 100 - total flux cleaned = 0.011094 Jy ! Component: 150 - total flux cleaned = 0.0120819 Jy ! Component: 200 - total flux cleaned = 0.012668 Jy ! Total flux subtracted in 200 components = 0.012668 Jy ! Clean residual min=-0.006749 max=0.005937 Jy/beam ! Clean residual mean=-0.000074 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.239577 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 71 components and 0.239577 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.408 mas, bmaj=11.53 mas, bpa=6.954 degrees ! Estimated noise=0.907748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124815 Jy ! Component: 100 - total flux cleaned = 0.00239307 Jy ! Component: 150 - total flux cleaned = 0.00284263 Jy ! Component: 200 - total flux cleaned = 0.00294112 Jy ! Total flux subtracted in 200 components = 0.00294112 Jy ! Clean residual min=-0.006813 max=0.005570 Jy/beam ! Clean residual mean=-0.000152 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.242518 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.242518 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=10.58 mas, bpa=5.718 degrees ! Estimated noise=0.702136 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.98474e-05 Jy ! Component: 100 - total flux cleaned = -0.000360494 Jy ! Component: 150 - total flux cleaned = -0.000521843 Jy ! Component: 200 - total flux cleaned = -0.000796395 Jy ! Total flux subtracted in 200 components = -0.000796395 Jy ! Clean residual min=-0.005898 max=0.005127 Jy/beam ! Clean residual mean=-0.000070 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.241722 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 121 components and 0.241722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064488Jy sigma=1.066290 ! Fit after self-cal, rms=0.064477Jy sigma=1.066019 wmodel J2042+7508_S_2006_02_16_yyk\_map.mod ! Writing 121 model components to file: J2042+7508_S_2006_02_16_yyk_map.mod wobs J2042+7508_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2042+7508_S_2006_02_16_yyk_uvs.fits wwins J2042+7508_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J2042+7508_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173258 Jy ! Component: 100 - total flux cleaned = -0.00173479 Jy ! Component: 150 - total flux cleaned = -0.00151057 Jy ! Component: 200 - total flux cleaned = -0.00123178 Jy ! Component: 250 - total flux cleaned = -0.00097114 Jy ! Component: 300 - total flux cleaned = -0.000847628 Jy ! Component: 350 - total flux cleaned = -0.000730581 Jy ! Component: 400 - total flux cleaned = -0.000730694 Jy ! Component: 450 - total flux cleaned = -0.000785114 Jy ! Component: 500 - total flux cleaned = -0.00105122 Jy ! Component: 550 - total flux cleaned = -0.00135889 Jy ! Component: 600 - total flux cleaned = -0.00145831 Jy ! Component: 650 - total flux cleaned = -0.00160416 Jy ! Component: 700 - total flux cleaned = -0.0017931 Jy ! Component: 750 - total flux cleaned = -0.00179318 Jy ! Component: 800 - total flux cleaned = -0.00192744 Jy ! Component: 850 - total flux cleaned = -0.0018837 Jy ! Component: 900 - total flux cleaned = -0.0019265 Jy ! Component: 950 - total flux cleaned = -0.0020097 Jy ! Component: 1000 - total flux cleaned = -0.00192833 Jy ! Component: 1050 - total flux cleaned = -0.00192867 Jy ! Component: 1100 - total flux cleaned = -0.00192848 Jy ! Component: 1150 - total flux cleaned = -0.00188947 Jy ! Component: 1200 - total flux cleaned = -0.00173797 Jy ! Component: 1250 - total flux cleaned = -0.00166316 Jy ! Component: 1300 - total flux cleaned = -0.00158976 Jy ! Component: 1350 - total flux cleaned = -0.0014461 Jy ! Component: 1400 - total flux cleaned = -0.00144623 Jy ! Component: 1450 - total flux cleaned = -0.00134119 Jy ! Component: 1500 - total flux cleaned = -0.00123818 Jy ! Component: 1550 - total flux cleaned = -0.00117106 Jy ! Component: 1600 - total flux cleaned = -0.00107128 Jy ! Component: 1650 - total flux cleaned = -0.00113682 Jy ! Component: 1700 - total flux cleaned = -0.000974596 Jy ! Component: 1750 - total flux cleaned = -0.000975117 Jy ! Component: 1800 - total flux cleaned = -0.000912364 Jy ! Component: 1850 - total flux cleaned = -0.000912577 Jy ! Component: 1900 - total flux cleaned = -0.00075854 Jy ! Component: 1950 - total flux cleaned = -0.000637431 Jy ! Component: 2000 - total flux cleaned = -0.000487567 Jy ! Total flux subtracted in 2048 components = -0.000309602 Jy ! Clean residual min=-0.001664 max=0.001485 Jy/beam ! Clean residual mean=-0.000023 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.241412 Jy keep ! Adding 152 model components to the UV plane model. ! The established model now contains 273 components and 0.241412 Jy ![Exited script file: muppet] wmap "J2042+7508_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 10.58 at 5.718 degrees (North through East) ! Clean map min=-0.0044419 max=0.18393 Jy/beam ! Writing clean map to FITS file: J2042+7508_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.183929 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000619293 device "J2042+7508_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2042+7508_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0101 1.0101 2.02021 4.04042 8.08084 16.1617 32.3233 64.6467 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 10.58 at 5.718 degrees (North through East) ! Clean map min=-0.0044419 max=0.18393 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2042+7508_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2042+7508_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2042+7508_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:45:15 2006