! Started logfile: J2022+7611_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:42:17 2006 obs J2022+7611_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J2022+7611_S_2006_02_23_yyk_uva.fits ! AN table 1: 885 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991538 visibilities/baseline/integration-bin. ! Found source: J2022+7611 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2435 lines of history. ! ! Reading 157952 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2022+7611_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.481874 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=10.16 mas, bpa=-4.586 degrees ! Estimated noise=1.32867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.347814 Jy ! Component: 100 - total flux cleaned = 0.420327 Jy ! Total flux subtracted in 100 components = 0.420327 Jy ! Clean residual min=-0.017845 max=0.023269 Jy/beam ! Clean residual mean=-0.000077 rms=0.005319 Jy/beam ! Combined flux in latest and established models = 0.420327 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.420327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179530Jy sigma=3.987042 ! Fit after self-cal, rms=0.179471Jy sigma=3.986117 ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=10.16 mas, bpa=-4.586 degrees ! Estimated noise=1.32867 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=10.34 mas, bpa=-2.904 degrees ! Estimated noise=0.63747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303351 Jy ! Component: 100 - total flux cleaned = 0.0472667 Jy ! Component: 150 - total flux cleaned = 0.0574364 Jy ! Component: 200 - total flux cleaned = 0.0637822 Jy ! Total flux subtracted in 200 components = 0.0637822 Jy ! Clean residual min=-0.038671 max=0.054981 Jy/beam ! Clean residual mean=-0.000064 rms=0.013553 Jy/beam ! Combined flux in latest and established models = 0.484109 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.484109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190945Jy sigma=3.734553 ! Fit after self-cal, rms=0.190893Jy sigma=3.733934 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 10.34 at -2.904 degrees (North through East) ! Clean map min=-0.037933 max=0.36647 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.08277 ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.86 HN 0.99 KP 0.91 ! LA 1.15 MK 0.83 NL 0.91 OV 0.92 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.06113 ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.92 HN 1.01 KP 0.93 ! LA 1.10 MK 0.91 NL 0.94 OV 0.96 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.413304 ! Telescope amplitude corrections in sub-array 1: ! BR 15.54 FD 0.95 HN 1.00 KP 0.95 ! LA 0.89 MK 0.94 NL 0.95 OV 0.97 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.10915 ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.92 HN 0.99 KP 0.84 ! LA 0.76 MK 1.00 NL 0.94 OV 0.85 ! PT 0.88 SC 1.05 ! ! ! Fit before self-cal, rms=0.190893Jy sigma=3.733934 ! Fit after self-cal, rms=0.453344Jy sigma=18.082121 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.453344Jy sigma=18.082121 ! Fit after self-cal, rms=0.453347Jy sigma=18.082077 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.37 mas, bpa=-4.804 degrees ! Estimated noise=0.222889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.245736 Jy ! Component: 100 - total flux cleaned = -0.303163 Jy ! Component: 150 - total flux cleaned = -0.335084 Jy ! Component: 200 - total flux cleaned = -0.354048 Jy ! Total flux subtracted in 200 components = -0.354048 Jy ! Clean residual min=-0.016249 max=0.009076 Jy/beam ! Clean residual mean=0.000075 rms=0.003154 Jy/beam ! Combined flux in latest and established models = 0.130061 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 55 components and 0.130061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541018Jy sigma=6.293215 ! Fit after self-cal, rms=0.541001Jy sigma=6.292556 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541001Jy sigma=6.292556 ! Fit after self-cal, rms=0.540630Jy sigma=6.257043 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115102 Jy ! Component: 100 - total flux cleaned = -0.0167986 Jy ! Component: 150 - total flux cleaned = -0.0190021 Jy ! Component: 200 - total flux cleaned = -0.0203077 Jy ! Total flux subtracted in 200 components = -0.0203077 Jy ! Clean residual min=-0.013953 max=0.010662 Jy/beam ! Clean residual mean=0.000063 rms=0.002858 Jy/beam ! Combined flux in latest and established models = 0.109753 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.109753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541014Jy sigma=6.192030 ! Fit after self-cal, rms=0.541031Jy sigma=6.188451 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 11.37 at -4.804 degrees (North through East) ! Clean map min=-0.013484 max=0.096371 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.094 mas, bmaj=14.95 mas, bpa=-15.81 degrees ! Estimated noise=0.293227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00402225 Jy ! Component: 100 - total flux cleaned = -0.00462619 Jy ! Component: 150 - total flux cleaned = -0.00488773 Jy ! Component: 200 - total flux cleaned = -0.00512902 Jy ! Total flux subtracted in 200 components = -0.00512902 Jy ! Clean residual min=-0.010278 max=0.010884 Jy/beam ! Clean residual mean=0.000138 rms=0.003039 Jy/beam ! Combined flux in latest and established models = 0.104624 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 71 components and 0.104624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.540102Jy sigma=6.193609 ! Fit after self-cal, rms=0.540081Jy sigma=6.192975 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.294 mas, bmaj=10.58 mas, bpa=-5.217 degrees ! Estimated noise=0.680871 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.181701 Jy ! Component: 100 - total flux cleaned = 0.22961 Jy ! Component: 150 - total flux cleaned = 0.241324 Jy ! Component: 200 - total flux cleaned = 0.238834 Jy ! Total flux subtracted in 200 components = 0.238834 Jy ! Clean residual min=-0.036709 max=0.036583 Jy/beam ! Clean residual mean=0.000086 rms=0.008232 Jy/beam ! Combined flux in latest and established models = 0.238834 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.238834 Jy ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.37 mas, bpa=-4.804 degrees ! Estimated noise=0.222889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.103461 Jy ! Component: 100 - total flux cleaned = -0.123509 Jy ! Component: 150 - total flux cleaned = -0.132641 Jy ! Component: 200 - total flux cleaned = -0.135797 Jy ! Total flux subtracted in 200 components = -0.135797 Jy ! Clean residual min=-0.014377 max=0.012079 Jy/beam ! Clean residual mean=0.000060 rms=0.003210 Jy/beam ! Combined flux in latest and established models = 0.103037 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 56 components and 0.103037 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.094 mas, bmaj=14.95 mas, bpa=-15.81 degrees ! Estimated noise=0.293227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000833043 Jy ! Component: 100 - total flux cleaned = -0.000843783 Jy ! Component: 150 - total flux cleaned = -0.00113127 Jy ! Component: 200 - total flux cleaned = -0.00136942 Jy ! Total flux subtracted in 200 components = -0.00136942 Jy ! Clean residual min=-0.010666 max=0.011928 Jy/beam ! Clean residual mean=0.000142 rms=0.003292 Jy/beam ! Combined flux in latest and established models = 0.101668 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 0.101668 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.37 mas, bpa=-4.804 degrees ! Estimated noise=0.222889 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00426871 Jy ! Component: 100 - total flux cleaned = -0.00400869 Jy ! Component: 150 - total flux cleaned = -0.00308323 Jy ! Component: 200 - total flux cleaned = -0.00252739 Jy ! Total flux subtracted in 200 components = -0.00252739 Jy ! Clean residual min=-0.012121 max=0.011931 Jy/beam ! Clean residual mean=0.000057 rms=0.003005 Jy/beam ! Combined flux in latest and established models = 0.0991404 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.0991404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.539627Jy sigma=6.150989 ! Fit after self-cal, rms=0.539594Jy sigma=6.150260 wmodel J2022+7611_S_2006_02_23_yyk\_map.mod ! Writing 77 model components to file: J2022+7611_S_2006_02_23_yyk_map.mod wobs J2022+7611_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J2022+7611_S_2006_02_23_yyk_uvs.fits wwins J2022+7611_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J2022+7611_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000485636 Jy ! Component: 100 - total flux cleaned = -0.000484508 Jy ! Component: 150 - total flux cleaned = -0.000667206 Jy ! Component: 200 - total flux cleaned = -0.00100198 Jy ! Component: 250 - total flux cleaned = -0.000997173 Jy ! Component: 300 - total flux cleaned = -0.00055926 Jy ! Component: 350 - total flux cleaned = -0.000141274 Jy ! Component: 400 - total flux cleaned = -0.000685856 Jy ! Component: 450 - total flux cleaned = -0.00108694 Jy ! Component: 500 - total flux cleaned = -0.00161306 Jy ! Component: 550 - total flux cleaned = -0.00200129 Jy ! Component: 600 - total flux cleaned = -0.00250893 Jy ! Component: 650 - total flux cleaned = -0.00301037 Jy ! Component: 700 - total flux cleaned = -0.00362535 Jy ! Component: 750 - total flux cleaned = -0.00423099 Jy ! Component: 800 - total flux cleaned = -0.00494655 Jy ! Component: 850 - total flux cleaned = -0.00553416 Jy ! Component: 900 - total flux cleaned = -0.0059983 Jy ! Component: 950 - total flux cleaned = -0.00679958 Jy ! Component: 1000 - total flux cleaned = -0.00736284 Jy ! Component: 1050 - total flux cleaned = -0.00769677 Jy ! Component: 1100 - total flux cleaned = -0.00802864 Jy ! Component: 1150 - total flux cleaned = -0.00835456 Jy ! Component: 1200 - total flux cleaned = -0.00867716 Jy ! Component: 1250 - total flux cleaned = -0.00888805 Jy ! Component: 1300 - total flux cleaned = -0.00909958 Jy ! Component: 1350 - total flux cleaned = -0.00930712 Jy ! Component: 1400 - total flux cleaned = -0.00961681 Jy ! Component: 1450 - total flux cleaned = -0.00961821 Jy ! Component: 1500 - total flux cleaned = -0.00992089 Jy ! Component: 1550 - total flux cleaned = -0.00992145 Jy ! Component: 1600 - total flux cleaned = -0.0101207 Jy ! Component: 1650 - total flux cleaned = -0.0103182 Jy ! Component: 1700 - total flux cleaned = -0.010416 Jy ! Component: 1750 - total flux cleaned = -0.010608 Jy ! Component: 1800 - total flux cleaned = -0.0106075 Jy ! Component: 1850 - total flux cleaned = -0.0106075 Jy ! Component: 1900 - total flux cleaned = -0.0106088 Jy ! Component: 1950 - total flux cleaned = -0.0106086 Jy ! Component: 2000 - total flux cleaned = -0.0107011 Jy ! Total flux subtracted in 2048 components = -0.0106103 Jy ! Clean residual min=-0.004541 max=0.004540 Jy/beam ! Clean residual mean=0.000036 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.0885301 Jy keep ! Adding 81 model components to the UV plane model. ! The established model now contains 157 components and 0.0885301 Jy ![Exited script file: muppet] wmap "J2022+7611_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 11.37 at -4.804 degrees (North through East) ! Clean map min=-0.015102 max=0.12384 Jy/beam ! Writing clean map to FITS file: J2022+7611_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00167605 device "J2022+7611_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J2022+7611_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.06023 4.06023 8.12045 16.2409 32.4818 64.9636 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 11.37 at -4.804 degrees (North through East) ! Clean map min=-0.015102 max=0.12384 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2022+7611_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J2022+7611_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2022+7611_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:42:58 2006