! Started logfile: J2005+7752_S_2006_02_14_yyk_uvs.log on Wed Jul  5 13:39:49 2006
obs J2005+7752_S_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J2005+7752_S_2006_02_14_yyk_uva.fits
! AN table 1: 866 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.795843 visibilities/baseline/integration-bin.
! Found source: J2005+7752
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2683 lines of history.
! 
! Reading 124056 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2005+7752_S_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.913377 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.371 mas, bmaj=10.57 mas, bpa=-5.147 degrees
! Estimated noise=1.46467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.704738 Jy
! Component: 100  -  total flux cleaned = 0.904527 Jy
! Total flux subtracted in 100 components = 0.904527 Jy
! Clean residual min=-0.043180 max=0.064069 Jy/beam
! Clean residual mean=-0.000308 rms=0.012880 Jy/beam
! Combined flux in latest and established models = 0.904527 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.904527 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.222056Jy  sigma=3.705575
! Fit after  self-cal, rms=0.219325Jy  sigma=3.665479
! Inverting map and beam 
! Estimated beam: bmin=2.371 mas, bmaj=10.57 mas, bpa=-5.147 degrees
! Estimated noise=1.46467 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.887 mas, bmaj=10.44 mas, bpa=-5.155 degrees
! Estimated noise=0.817117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.111278 Jy
! Component: 100  -  total flux cleaned = 0.150979 Jy
! Component: 150  -  total flux cleaned = 0.15562 Jy
! Component: 200  -  total flux cleaned = 0.154747 Jy
! Total flux subtracted in 200 components = 0.154747 Jy
! Clean residual min=-0.026820 max=0.058117 Jy/beam
! Clean residual mean=-0.000003 rms=0.010017 Jy/beam
! Combined flux in latest and established models = 1.05927 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 1.05927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173902Jy  sigma=2.907316
! Fit after  self-cal, rms=0.173931Jy  sigma=2.907746
! Inverting map 
! Added new window around map position (-5.5, 0).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0478663 Jy
! Component: 100  -  total flux cleaned = 0.046004 Jy
! Component: 150  -  total flux cleaned = 0.0440396 Jy
! Component: 200  -  total flux cleaned = 0.0415944 Jy
! Total flux subtracted in 200 components = 0.0415944 Jy
! Clean residual min=-0.022064 max=0.031254 Jy/beam
! Clean residual mean=-0.000096 rms=0.006847 Jy/beam
! Combined flux in latest and established models = 1.10087 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 50 components and 1.10087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158546Jy  sigma=2.641143
! Fit after  self-cal, rms=0.156983Jy  sigma=2.606845
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.887 x 10.44 at -5.155 degrees (North through East)
! Clean map  min=-0.019873  max=0.85394 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01403
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        0.99     KP        0.95     
!   LA        1.20     MK        0.90     NL        0.96     OV        1.00     
!   PT        1.00*    SC        0.97     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.986156
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.17     MK        0.99     NL        0.99     OV        1.01     
!   PT        1.00*    SC        0.98     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.981647
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.09     NL        1.09     OV        1.04     
!   PT        1.00*    SC        1.04     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.02593
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.95     KP        0.88     
!   LA        0.79     MK        1.10     NL        1.00     OV        0.86     
!   PT        1.00*    SC        1.12     
! 
! 
! Fit before self-cal, rms=0.156983Jy  sigma=2.606845
! Fit after  self-cal, rms=0.115545Jy  sigma=1.990285
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115545Jy  sigma=1.990285
! Fit after  self-cal, rms=0.115819Jy  sigma=1.992436
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.94 mas, bmaj=10.33 mas, bpa=-5.343 degrees
! Estimated noise=0.817302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104076 Jy
! Component: 100  -  total flux cleaned = 0.00940698 Jy
! Component: 150  -  total flux cleaned = 0.00986257 Jy
! Component: 200  -  total flux cleaned = 0.0104626 Jy
! Total flux subtracted in 200 components = 0.0104626 Jy
! Clean residual min=-0.008228 max=0.010504 Jy/beam
! Clean residual mean=0.000085 rms=0.002460 Jy/beam
! Combined flux in latest and established models = 1.11133 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 78 components and 1.11133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113709Jy  sigma=1.957686
! Fit after  self-cal, rms=0.113722Jy  sigma=1.955463
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113722Jy  sigma=1.955463
! Fit after  self-cal, rms=0.071836Jy  sigma=1.230406
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578632 Jy
! Component: 100  -  total flux cleaned = 0.00635661 Jy
! Component: 150  -  total flux cleaned = 0.00636987 Jy
! Component: 200  -  total flux cleaned = 0.00637318 Jy
! Total flux subtracted in 200 components = 0.00637318 Jy
! Clean residual min=-0.007746 max=0.009710 Jy/beam
! Clean residual mean=0.000082 rms=0.002212 Jy/beam
! Combined flux in latest and established models = 1.1177 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 97 components and 1.1177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070800Jy  sigma=1.216303
! Fit after  self-cal, rms=0.070431Jy  sigma=1.210353
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.94 x 10.33 at -5.343 degrees (North through East)
! Clean map  min=-0.0076104  max=0.8626 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070431Jy  sigma=1.210353
! Fit after  self-cal, rms=0.061359Jy  sigma=1.033668
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061359Jy  sigma=1.033668
! Fit after  self-cal, rms=0.061337Jy  sigma=1.033350
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=10.32 mas, bpa=-5.4 degrees
! Estimated noise=0.816599 mJy/beam.
! Added new window around map position (-17, -2.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106408 Jy
! Component: 100  -  total flux cleaned = 0.015998 Jy
! Component: 150  -  total flux cleaned = 0.0194391 Jy
! Component: 200  -  total flux cleaned = 0.0213553 Jy
! Total flux subtracted in 200 components = 0.0213553 Jy
! Clean residual min=-0.005793 max=0.004621 Jy/beam
! Clean residual mean=0.000000 rms=0.001411 Jy/beam
! Combined flux in latest and established models = 1.13906 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 131 components and 1.13906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059848Jy  sigma=1.002896
! Fit after  self-cal, rms=0.059798Jy  sigma=1.002259
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059798Jy  sigma=1.002259
! Fit after  self-cal, rms=0.056227Jy  sigma=0.932984
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056227Jy  sigma=0.932984
! Fit after  self-cal, rms=0.056227Jy  sigma=0.932975
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=10.31 mas, bpa=-5.409 degrees
! Estimated noise=0.815362 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228645 Jy
! Component: 100  -  total flux cleaned = 0.00364787 Jy
! Component: 150  -  total flux cleaned = 0.00497202 Jy
! Component: 200  -  total flux cleaned = 0.00617457 Jy
! Total flux subtracted in 200 components = 0.00617457 Jy
! Clean residual min=-0.005105 max=0.003869 Jy/beam
! Clean residual mean=-0.000003 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 1.14523 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 153 components and 1.14523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055844Jy  sigma=0.926518
! Fit after  self-cal, rms=0.055830Jy  sigma=0.926307
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.673 mas, bmaj=10.69 mas, bpa=-5.335 degrees
! Estimated noise=1.06041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389719 Jy
! Component: 100  -  total flux cleaned = 0.00638444 Jy
! Component: 150  -  total flux cleaned = 0.00760568 Jy
! Component: 200  -  total flux cleaned = 0.00827003 Jy
! Total flux subtracted in 200 components = 0.00827003 Jy
! Clean residual min=-0.006060 max=0.004636 Jy/beam
! Clean residual mean=-0.000024 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 1.1535 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 182 components and 1.1535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055757Jy  sigma=0.924492
! Fit after  self-cal, rms=0.055744Jy  sigma=0.924181
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.402 mas, bmaj=10.44 mas, bpa=-5.311 degrees
! Estimated noise=1.46149 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.702881 Jy
! Component: 100  -  total flux cleaned = 0.894127 Jy
! Component: 150  -  total flux cleaned = 0.993576 Jy
! Component: 200  -  total flux cleaned = 1.05361 Jy
! Total flux subtracted in 200 components = 1.05361 Jy
! Clean residual min=-0.017714 max=0.022925 Jy/beam
! Clean residual mean=-0.000013 rms=0.004756 Jy/beam
! Combined flux in latest and established models = 1.05361 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.05361 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=10.31 mas, bpa=-5.409 degrees
! Estimated noise=0.815362 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0488308 Jy
! Component: 100  -  total flux cleaned = 0.073324 Jy
! Component: 150  -  total flux cleaned = 0.0804077 Jy
! Component: 200  -  total flux cleaned = 0.085238 Jy
! Total flux subtracted in 200 components = 0.085238 Jy
! Clean residual min=-0.008034 max=0.010124 Jy/beam
! Clean residual mean=0.000100 rms=0.002409 Jy/beam
! Combined flux in latest and established models = 1.13885 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 45 components and 1.13885 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.673 mas, bmaj=10.69 mas, bpa=-5.335 degrees
! Estimated noise=1.06041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00951379 Jy
! Component: 100  -  total flux cleaned = 0.0127539 Jy
! Component: 150  -  total flux cleaned = 0.0148052 Jy
! Component: 200  -  total flux cleaned = 0.0166836 Jy
! Total flux subtracted in 200 components = 0.0166836 Jy
! Clean residual min=-0.006703 max=0.007366 Jy/beam
! Clean residual mean=0.000049 rms=0.002022 Jy/beam
! Combined flux in latest and established models = 1.15554 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 94 components and 1.15554 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=10.31 mas, bpa=-5.409 degrees
! Estimated noise=0.815362 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00296947 Jy
! Component: 100  -  total flux cleaned = -0.00224023 Jy
! Component: 150  -  total flux cleaned = -0.00175603 Jy
! Component: 200  -  total flux cleaned = -0.00146873 Jy
! Total flux subtracted in 200 components = -0.00146873 Jy
! Clean residual min=-0.006020 max=0.005422 Jy/beam
! Clean residual mean=0.000008 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 1.15407 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 130 components and 1.15407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057083Jy  sigma=0.941871
! Fit after  self-cal, rms=0.057022Jy  sigma=0.940521
wmodel J2005+7752_S_2006_02_14_yyk\_map.mod
! Writing 130 model components to file: J2005+7752_S_2006_02_14_yyk_map.mod
wobs J2005+7752_S_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J2005+7752_S_2006_02_14_yyk_uvs.fits
wwins J2005+7752_S_2006_02_14_yyk\_map.win
! wwins: Wrote 3 windows to J2005+7752_S_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000879718 Jy
! Component: 100  -  total flux cleaned = -0.00117818 Jy
! Component: 150  -  total flux cleaned = -0.00146201 Jy
! Component: 200  -  total flux cleaned = -0.00166511 Jy
! Component: 250  -  total flux cleaned = -0.0017916 Jy
! Component: 300  -  total flux cleaned = -0.00185094 Jy
! Component: 350  -  total flux cleaned = -0.00201846 Jy
! Component: 400  -  total flux cleaned = -0.00196349 Jy
! Component: 450  -  total flux cleaned = -0.00196309 Jy
! Component: 500  -  total flux cleaned = -0.00201217 Jy
! Component: 550  -  total flux cleaned = -0.00181968 Jy
! Component: 600  -  total flux cleaned = -0.0016801 Jy
! Component: 650  -  total flux cleaned = -0.0015898 Jy
! Component: 700  -  total flux cleaned = -0.00150106 Jy
! Component: 750  -  total flux cleaned = -0.00141412 Jy
! Component: 800  -  total flux cleaned = -0.00137201 Jy
! Component: 850  -  total flux cleaned = -0.00145395 Jy
! Component: 900  -  total flux cleaned = -0.00145391 Jy
! Component: 950  -  total flux cleaned = -0.00149396 Jy
! Component: 1000  -  total flux cleaned = -0.00153237 Jy
! Component: 1050  -  total flux cleaned = -0.00153217 Jy
! Component: 1100  -  total flux cleaned = -0.00164062 Jy
! Component: 1150  -  total flux cleaned = -0.00156867 Jy
! Component: 1200  -  total flux cleaned = -0.00149908 Jy
! Component: 1250  -  total flux cleaned = -0.0015342 Jy
! Component: 1300  -  total flux cleaned = -0.00160166 Jy
! Component: 1350  -  total flux cleaned = -0.00163513 Jy
! Component: 1400  -  total flux cleaned = -0.00173212 Jy
! Component: 1450  -  total flux cleaned = -0.00173211 Jy
! Component: 1500  -  total flux cleaned = -0.00185735 Jy
! Component: 1550  -  total flux cleaned = -0.00194949 Jy
! Component: 1600  -  total flux cleaned = -0.00197961 Jy
! Component: 1650  -  total flux cleaned = -0.00203875 Jy
! Component: 1700  -  total flux cleaned = -0.00209776 Jy
! Component: 1750  -  total flux cleaned = -0.00215587 Jy
! Component: 1800  -  total flux cleaned = -0.0022699 Jy
! Component: 1850  -  total flux cleaned = -0.00235425 Jy
! Component: 1900  -  total flux cleaned = -0.00249282 Jy
! Component: 1950  -  total flux cleaned = -0.00243798 Jy
! Component: 2000  -  total flux cleaned = -0.00254666 Jy
! Total flux subtracted in 2048 components = -0.0026804 Jy
! Clean residual min=-0.001800 max=0.001939 Jy/beam
! Clean residual mean=0.000001 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 1.15139 Jy
keep
! Adding 171 model components to the UV plane model.
! The established model now contains 300 components and 1.15139 Jy
![Exited script file: muppet]
wmap "J2005+7752_S_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.95 x 10.31 at -5.409 degrees (North through East)
! Clean map  min=-0.0062226  max=0.8629 Jy/beam
! Writing clean map to FITS file: J2005+7752_S_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.862903 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00056127 
device "J2005+7752_S_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J2005+7752_S_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.195133 0.195133 0.390266 0.780532 1.56106 3.12213 6.24426 12.4885 24.977 49.9541 99.9081
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.862 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.95 x 10.31 at -5.409 degrees (North through East)
! Clean map  min=-0.0062226  max=0.8629 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2005+7752_S_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J2005+7752_S_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2005+7752_S_2006_02_14_yyk_uvs.log closed on Wed Jul  5 13:40:36 2006