! Started logfile: J1832+8049_X_2006_02_14_yyk_uvs.log on Wed Jul  5 13:31:33 2006
obs J1832+8049_X_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1832+8049_X_2006_02_14_yyk_uva.fits
! AN table 1: 872 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.13318 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1832+8049
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2319 lines of history.
! 
! Reading 20904 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1832+8049_X_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0981964 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.737 mas, bmaj=3.044 mas, bpa=20.64 degrees
! Estimated noise=6.14661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0369936 Jy
! Component: 100  -  total flux cleaned = 0.049808 Jy
! Total flux subtracted in 100 components = 0.049808 Jy
! Clean residual min=-0.009385 max=0.009300 Jy/beam
! Clean residual mean=-0.000038 rms=0.003594 Jy/beam
! Combined flux in latest and established models = 0.049808 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.049808 Jy
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 119 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.071914Jy  sigma=1.134943
! Fit after  self-cal, rms=0.068829Jy  sigma=1.078718
! Inverting map and beam 
! Estimated beam: bmin=1.744 mas, bmaj=3.056 mas, bpa=20.65 degrees
! Estimated noise=6.12494 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.934 mas, bmaj=3.209 mas, bpa=33.83 degrees
! Estimated noise=2.55682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332527 Jy
! Component: 100  -  total flux cleaned = 0.00270801 Jy
! Component: 150  -  total flux cleaned = 0.00214416 Jy
! Component: 200  -  total flux cleaned = 0.00214789 Jy
! Total flux subtracted in 200 components = 0.00214789 Jy
! Clean residual min=-0.003436 max=0.003450 Jy/beam
! Clean residual mean=0.000044 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.0519559 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 80 components and 0.0519559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067485Jy  sigma=1.030898
! Fit after  self-cal, rms=0.067607Jy  sigma=1.029526
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.934 x 3.209 at 33.83 degrees (North through East)
! Clean map  min=-0.0091767  max=0.028081 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.993029
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.13     HN        1.00*    KP        1.00*    
!   LA        0.98     MK        1.00*    NL        0.97     OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.067607Jy  sigma=1.029526
! Fit after  self-cal, rms=0.076943Jy  sigma=1.072795
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076943Jy  sigma=1.072795
! Fit after  self-cal, rms=0.076937Jy  sigma=1.072784
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.892 mas, bmaj=2.97 mas, bpa=16.86 degrees
! Estimated noise=3.06965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222222 Jy
! Component: 100  -  total flux cleaned = 0.00284168 Jy
! Component: 150  -  total flux cleaned = 0.00260503 Jy
! Component: 200  -  total flux cleaned = 0.00234528 Jy
! Total flux subtracted in 200 components = 0.00234528 Jy
! Clean residual min=-0.001757 max=0.001787 Jy/beam
! Clean residual mean=0.000011 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.0543012 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.0543012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077420Jy  sigma=1.064815
! Fit after  self-cal, rms=0.077367Jy  sigma=1.064743
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077367Jy  sigma=1.064743
! Fit after  self-cal, rms=0.072470Jy  sigma=0.922622
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000609199 Jy
! Component: 100  -  total flux cleaned = 0.00102011 Jy
! Component: 150  -  total flux cleaned = 0.00138502 Jy
! Component: 200  -  total flux cleaned = 0.0013746 Jy
! Total flux subtracted in 200 components = 0.0013746 Jy
! Clean residual min=-0.001697 max=0.001687 Jy/beam
! Clean residual mean=-0.000001 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0556758 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 143 components and 0.0556758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072197Jy  sigma=0.907993
! Fit after  self-cal, rms=0.069458Jy  sigma=0.889404
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.892 x 2.97 at 16.86 degrees (North through East)
! Clean map  min=-0.0079701  max=0.029734 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=2.968 mas, bpa=12.98 degrees
! Estimated noise=3.19736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00081171 Jy
! Component: 100  -  total flux cleaned = -0.000479949 Jy
! Component: 150  -  total flux cleaned = -0.000165215 Jy
! Component: 200  -  total flux cleaned = 0.000542332 Jy
! Total flux subtracted in 200 components = 0.000542332 Jy
! Clean residual min=-0.000817 max=0.000829 Jy/beam
! Clean residual mean=0.000007 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0562182 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 183 components and 0.0562181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069274Jy  sigma=0.885969
! Fit after  self-cal, rms=0.067271Jy  sigma=0.880103
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.728 mas, bmaj=3.097 mas, bpa=19.84 degrees
! Estimated noise=6.24755 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475053 Jy
! Component: 100  -  total flux cleaned = 0.0622996 Jy
! Component: 150  -  total flux cleaned = 0.0707322 Jy
! Component: 200  -  total flux cleaned = 0.0793842 Jy
! Total flux subtracted in 200 components = 0.0793841 Jy
! Clean residual min=-0.009224 max=0.009237 Jy/beam
! Clean residual mean=0.000049 rms=0.002812 Jy/beam
! Combined flux in latest and established models = 0.0793841 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.0793841 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.892 mas, bmaj=2.97 mas, bpa=16.86 degrees
! Estimated noise=3.06965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00368435 Jy
! Component: 100  -  total flux cleaned = 0.00414073 Jy
! Component: 150  -  total flux cleaned = 0.00412538 Jy
! Component: 200  -  total flux cleaned = 0.00387534 Jy
! Total flux subtracted in 200 components = 0.00387534 Jy
! Clean residual min=-0.003831 max=0.003818 Jy/beam
! Clean residual mean=0.000018 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.0832595 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 78 components and 0.0832595 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=2.968 mas, bpa=12.98 degrees
! Estimated noise=3.19736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105022 Jy
! Component: 100  -  total flux cleaned = -0.00293252 Jy
! Component: 150  -  total flux cleaned = -0.00337433 Jy
! Component: 200  -  total flux cleaned = -0.00314804 Jy
! Total flux subtracted in 200 components = -0.00314804 Jy
! Clean residual min=-0.001484 max=0.001547 Jy/beam
! Clean residual mean=-0.000006 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0801114 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 118 components and 0.0801114 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.892 mas, bmaj=2.97 mas, bpa=16.86 degrees
! Estimated noise=3.06965 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220015 Jy
! Component: 100  -  total flux cleaned = 0.000220766 Jy
! Component: 150  -  total flux cleaned = 0.000518793 Jy
! Component: 200  -  total flux cleaned = 0.000849477 Jy
! Total flux subtracted in 200 components = 0.000849477 Jy
! Clean residual min=-0.001571 max=0.001542 Jy/beam
! Clean residual mean=0.000005 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.0809609 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 144 components and 0.0809609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067259Jy  sigma=0.886507
! Fit after  self-cal, rms=0.065878Jy  sigma=0.881161
wmodel J1832+8049_X_2006_02_14_yyk\_map.mod
! Writing 144 model components to file: J1832+8049_X_2006_02_14_yyk_map.mod
wobs J1832+8049_X_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1832+8049_X_2006_02_14_yyk_uvs.fits
wwins J1832+8049_X_2006_02_14_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J1832+8049_X_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.892 x 2.97 at 16.86 degrees (North through East)
! Clean map  min=-0.0096258  max=0.032843 Jy/beam
! Writing clean map to FITS file: J1832+8049_X_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0328428 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000515835 
device "J1832+8049_X_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1832+8049_X_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.71185 4.71185 9.42371 18.8474 37.6948 75.3897
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.032 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.892 x 2.97 at 16.86 degrees (North through East)
! Clean map  min=-0.0096258  max=0.032843 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1832+8049_X_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1832+8049_X_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1832+8049_X_2006_02_14_yyk_uvs.log closed on Wed Jul  5 13:32:00 2006