! Started logfile: J1824+5651_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:27:32 2006 obs J1824+5651_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1824+5651_S_2006_02_23_yyk_uva.fits ! AN table 1: 254 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764217 visibilities/baseline/integration-bin. ! Found source: J1824+5651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 34940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1824+5651_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.721241 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=9.662 mas, bpa=15.76 degrees ! Estimated noise=1.96235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.5868 Jy ! Component: 100 - total flux cleaned = 0.678787 Jy ! Total flux subtracted in 100 components = 0.678787 Jy ! Clean residual min=-0.029604 max=0.034221 Jy/beam ! Clean residual mean=-0.000041 rms=0.008000 Jy/beam ! Combined flux in latest and established models = 0.678787 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.678787 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.200744Jy sigma=2.255935 ! Fit after self-cal, rms=0.200223Jy sigma=2.249096 ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=9.662 mas, bpa=15.76 degrees ! Estimated noise=1.96235 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=9.779 mas, bpa=15.16 degrees ! Estimated noise=1.4199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311764 Jy ! Component: 100 - total flux cleaned = 0.0401494 Jy ! Component: 150 - total flux cleaned = 0.0447323 Jy ! Component: 200 - total flux cleaned = 0.0464117 Jy ! Total flux subtracted in 200 components = 0.0464117 Jy ! Clean residual min=-0.015773 max=0.018991 Jy/beam ! Clean residual mean=-0.000257 rms=0.005452 Jy/beam ! Combined flux in latest and established models = 0.725199 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.725199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196442Jy sigma=2.154743 ! Fit after self-cal, rms=0.196122Jy sigma=2.150658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 9.779 at 15.16 degrees (North through East) ! Clean map min=-0.016215 max=0.66726 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.994347 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 1.01 KP 0.98 ! LA 1.18 MK 0.92 NL 0.92 OV 0.95 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.975424 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.10 HN 1.01 KP 0.97 ! LA 1.16 MK 1.00 NL 0.96 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.966933 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.19 HN 1.00 KP 0.99 ! LA 0.91 MK 1.13 NL 1.03 OV 1.00 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.08465 ! Telescope amplitude corrections in sub-array 1: ! BR 0.53 FD 1.13 HN 0.97 KP 0.89 ! LA 0.78 MK 1.07 NL 0.94 OV 0.87 ! PT 0.92 SC 1.11 ! ! ! Fit before self-cal, rms=0.196122Jy sigma=2.150658 ! Fit after self-cal, rms=0.105402Jy sigma=1.526932 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105402Jy sigma=1.526932 ! Fit after self-cal, rms=0.105387Jy sigma=1.526821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=9.653 mas, bpa=15.03 degrees ! Estimated noise=1.40049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722897 Jy ! Component: 100 - total flux cleaned = 0.00723944 Jy ! Component: 150 - total flux cleaned = 0.00706527 Jy ! Component: 200 - total flux cleaned = 0.00680839 Jy ! Total flux subtracted in 200 components = 0.00680839 Jy ! Clean residual min=-0.010168 max=0.014298 Jy/beam ! Clean residual mean=-0.000028 rms=0.003429 Jy/beam ! Combined flux in latest and established models = 0.732007 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.732007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104597Jy sigma=1.505653 ! Fit after self-cal, rms=0.104449Jy sigma=1.504344 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104449Jy sigma=1.504344 ! Fit after self-cal, rms=0.102235Jy sigma=1.467036 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176091 Jy ! Component: 100 - total flux cleaned = 0.000233054 Jy ! Component: 150 - total flux cleaned = 0.000236863 Jy ! Component: 200 - total flux cleaned = 0.000235552 Jy ! Total flux subtracted in 200 components = 0.000235552 Jy ! Clean residual min=-0.009581 max=0.013825 Jy/beam ! Clean residual mean=-0.000027 rms=0.003349 Jy/beam ! Combined flux in latest and established models = 0.732243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.732243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102119Jy sigma=1.463958 ! Fit after self-cal, rms=0.101900Jy sigma=1.460881 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 9.653 at 15.03 degrees (North through East) ! Clean map min=-0.0087871 max=0.6624 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101900Jy sigma=1.460881 ! Fit after self-cal, rms=0.076993Jy sigma=1.063174 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076993Jy sigma=1.063174 ! Fit after self-cal, rms=0.076981Jy sigma=1.062798 ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=9.606 mas, bpa=14.96 degrees ! Estimated noise=1.39535 mJy/beam. ! Added new window around map position (-8, -24.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162844 Jy ! Component: 100 - total flux cleaned = 0.0246678 Jy ! Component: 150 - total flux cleaned = 0.0303307 Jy ! Component: 200 - total flux cleaned = 0.0337948 Jy ! Total flux subtracted in 200 components = 0.0337948 Jy ! Clean residual min=-0.006337 max=0.006680 Jy/beam ! Clean residual mean=-0.000020 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.766038 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 125 components and 0.766038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074253Jy sigma=1.000630 ! Fit after self-cal, rms=0.074129Jy sigma=0.998927 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074129Jy sigma=0.998927 ! Fit after self-cal, rms=0.072059Jy sigma=0.959717 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072059Jy sigma=0.959717 ! Fit after self-cal, rms=0.072063Jy sigma=0.959688 ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=9.587 mas, bpa=14.91 degrees ! Estimated noise=1.39413 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429202 Jy ! Component: 100 - total flux cleaned = 0.00693411 Jy ! Component: 150 - total flux cleaned = 0.00916297 Jy ! Component: 200 - total flux cleaned = 0.011076 Jy ! Total flux subtracted in 200 components = 0.011076 Jy ! Clean residual min=-0.005144 max=0.005103 Jy/beam ! Clean residual mean=-0.000018 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.777114 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 152 components and 0.777114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071641Jy sigma=0.949778 ! Fit after self-cal, rms=0.071620Jy sigma=0.949611 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.186 mas, bmaj=10.4 mas, bpa=14.94 degrees ! Estimated noise=1.79821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520104 Jy ! Component: 100 - total flux cleaned = 0.00735568 Jy ! Component: 150 - total flux cleaned = 0.00820658 Jy ! Component: 200 - total flux cleaned = 0.00893736 Jy ! Total flux subtracted in 200 components = 0.00893736 Jy ! Clean residual min=-0.006530 max=0.005558 Jy/beam ! Clean residual mean=-0.000070 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.786051 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 180 components and 0.786051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071567Jy sigma=0.949033 ! Fit after self-cal, rms=0.071560Jy sigma=0.948961 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=9.501 mas, bpa=15.94 degrees ! Estimated noise=1.93004 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.576487 Jy ! Component: 100 - total flux cleaned = 0.674323 Jy ! Component: 150 - total flux cleaned = 0.706896 Jy ! Component: 200 - total flux cleaned = 0.725223 Jy ! Total flux subtracted in 200 components = 0.725223 Jy ! Clean residual min=-0.007722 max=0.009043 Jy/beam ! Clean residual mean=0.000029 rms=0.002684 Jy/beam ! Combined flux in latest and established models = 0.725222 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.725222 Jy ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=9.587 mas, bpa=14.91 degrees ! Estimated noise=1.39413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134867 Jy ! Component: 100 - total flux cleaned = 0.0225565 Jy ! Component: 150 - total flux cleaned = 0.0297218 Jy ! Component: 200 - total flux cleaned = 0.0356106 Jy ! Total flux subtracted in 200 components = 0.0356106 Jy ! Clean residual min=-0.005940 max=0.005190 Jy/beam ! Clean residual mean=-0.000011 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 0.760833 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 105 components and 0.760833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.186 mas, bmaj=10.4 mas, bpa=14.94 degrees ! Estimated noise=1.79821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969261 Jy ! Component: 100 - total flux cleaned = 0.0161354 Jy ! Component: 150 - total flux cleaned = 0.0206753 Jy ! Component: 200 - total flux cleaned = 0.0239362 Jy ! Total flux subtracted in 200 components = 0.0239362 Jy ! Clean residual min=-0.007695 max=0.006085 Jy/beam ! Clean residual mean=-0.000063 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.784769 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 150 components and 0.784769 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=9.587 mas, bpa=14.91 degrees ! Estimated noise=1.39413 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848797 Jy ! Component: 100 - total flux cleaned = 0.00204371 Jy ! Component: 150 - total flux cleaned = 0.00306981 Jy ! Component: 200 - total flux cleaned = 0.00370716 Jy ! Total flux subtracted in 200 components = 0.00370716 Jy ! Clean residual min=-0.005017 max=0.004806 Jy/beam ! Clean residual mean=-0.000029 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.788476 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 186 components and 0.788476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071442Jy sigma=0.947301 ! Fit after self-cal, rms=0.071441Jy sigma=0.947044 wmodel J1824+5651_S_2006_02_23_yyk\_map.mod ! Writing 186 model components to file: J1824+5651_S_2006_02_23_yyk_map.mod wobs J1824+5651_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1824+5651_S_2006_02_23_yyk_uvs.fits wwins J1824+5651_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1824+5651_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131449 Jy ! Component: 100 - total flux cleaned = -0.00148229 Jy ! Component: 150 - total flux cleaned = -0.00202896 Jy ! Component: 200 - total flux cleaned = -0.00260929 Jy ! Component: 250 - total flux cleaned = -0.00281458 Jy ! Component: 300 - total flux cleaned = -0.00287864 Jy ! Component: 350 - total flux cleaned = -0.00275747 Jy ! Component: 400 - total flux cleaned = -0.00293511 Jy ! Component: 450 - total flux cleaned = -0.0031603 Jy ! Component: 500 - total flux cleaned = -0.00321449 Jy ! Component: 550 - total flux cleaned = -0.00310751 Jy ! Component: 600 - total flux cleaned = -0.00295271 Jy ! Component: 650 - total flux cleaned = -0.0027535 Jy ! Component: 700 - total flux cleaned = -0.00260824 Jy ! Component: 750 - total flux cleaned = -0.00223687 Jy ! Component: 800 - total flux cleaned = -0.0020577 Jy ! Component: 850 - total flux cleaned = -0.00197093 Jy ! Component: 900 - total flux cleaned = -0.0018427 Jy ! Component: 950 - total flux cleaned = -0.00167689 Jy ! Component: 1000 - total flux cleaned = -0.0015161 Jy ! Component: 1050 - total flux cleaned = -0.00139693 Jy ! Component: 1100 - total flux cleaned = -0.00124166 Jy ! Component: 1150 - total flux cleaned = -0.00112692 Jy ! Component: 1200 - total flux cleaned = -0.000868184 Jy ! Component: 1250 - total flux cleaned = -0.000831195 Jy ! Component: 1300 - total flux cleaned = -0.000724307 Jy ! Component: 1350 - total flux cleaned = -0.000688931 Jy ! Component: 1400 - total flux cleaned = -0.000621671 Jy ! Component: 1450 - total flux cleaned = -0.000588667 Jy ! Component: 1500 - total flux cleaned = -0.00058933 Jy ! Component: 1550 - total flux cleaned = -0.000557598 Jy ! Component: 1600 - total flux cleaned = -0.000495 Jy ! Component: 1650 - total flux cleaned = -0.000650448 Jy ! Component: 1700 - total flux cleaned = -0.000742062 Jy ! Component: 1750 - total flux cleaned = -0.000832791 Jy ! Component: 1800 - total flux cleaned = -0.000981058 Jy ! Component: 1850 - total flux cleaned = -0.00106864 Jy ! Component: 1900 - total flux cleaned = -0.00124145 Jy ! Component: 1950 - total flux cleaned = -0.00141111 Jy ! Component: 2000 - total flux cleaned = -0.00149449 Jy ! Total flux subtracted in 2048 components = -0.00155 Jy ! Clean residual min=-0.001559 max=0.001603 Jy/beam ! Clean residual mean=-0.000008 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.786926 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 326 components and 0.786926 Jy ![Exited script file: muppet] wmap "J1824+5651_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 9.587 at 14.91 degrees (North through East) ! Clean map min=-0.0040999 max=0.66549 Jy/beam ! Writing clean map to FITS file: J1824+5651_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.665487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000564406 device "J1824+5651_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1824+5651_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.254433 0.254433 0.508865 1.01773 2.03546 4.07092 8.14184 16.2837 32.5674 65.1347 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.665 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 9.587 at 14.91 degrees (North through East) ! Clean map min=-0.0040999 max=0.66549 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1824+5651_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1824+5651_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1824+5651_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:28:16 2006