! Started logfile: J1800+7828_S_2006_02_16_yyk_uvs.log on Wed Jul 5 13:20:19 2006 obs J1800+7828_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1800+7828_S_2006_02_16_yyk_uva.fits ! AN table 1: 872 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966386 visibilities/baseline/integration-bin. ! Found source: J1800+7828 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2427 lines of history. ! ! Reading 151684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1800+7828_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.36664 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=10.08 mas, bpa=2.76 degrees ! Estimated noise=1.46743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.07265 Jy ! Component: 100 - total flux cleaned = 1.34744 Jy ! Total flux subtracted in 100 components = 1.34744 Jy ! Clean residual min=-0.064160 max=0.127201 Jy/beam ! Clean residual mean=0.000234 rms=0.023213 Jy/beam ! Combined flux in latest and established models = 1.34744 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.34744 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.356431Jy sigma=6.220838 ! Fit after self-cal, rms=0.356140Jy sigma=6.214666 ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=10.08 mas, bpa=2.76 degrees ! Estimated noise=1.46743 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=10.51 mas, bpa=3.167 degrees ! Estimated noise=0.727065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.156217 Jy ! Component: 100 - total flux cleaned = 0.212803 Jy ! Component: 150 - total flux cleaned = 0.238444 Jy ! Component: 200 - total flux cleaned = 0.240893 Jy ! Total flux subtracted in 200 components = 0.240893 Jy ! Clean residual min=-0.060662 max=0.121050 Jy/beam ! Clean residual mean=0.000303 rms=0.023559 Jy/beam ! Combined flux in latest and established models = 1.58834 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 1.58834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316676Jy sigma=5.325256 ! Fit after self-cal, rms=0.316561Jy sigma=5.323163 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 10.51 at 3.167 degrees (North through East) ! Clean map min=-0.058971 max=1.3114 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.982944 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 0.99 KP 0.93 ! LA 1.13 MK 0.94 NL 1.47 OV 0.94 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.974458 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.01 KP 0.94 ! LA 1.11 MK 1.01 NL 1.40 OV 0.96 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.936016 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.99 KP 0.94 ! LA 0.87 MK 1.12 NL 1.73 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01999 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.94 KP 0.86 ! LA 0.74 MK 1.11 NL 1.42 OV 0.86 ! PT 0.91 SC 1.07 ! ! ! Fit before self-cal, rms=0.316561Jy sigma=5.323163 ! Fit after self-cal, rms=0.189609Jy sigma=3.477533 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189609Jy sigma=3.477533 ! Fit after self-cal, rms=0.190011Jy sigma=3.476202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=10.29 mas, bpa=3.216 degrees ! Estimated noise=0.682354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0646469 Jy ! Component: 100 - total flux cleaned = -0.0805045 Jy ! Component: 150 - total flux cleaned = -0.0830323 Jy ! Component: 200 - total flux cleaned = -0.0844535 Jy ! Total flux subtracted in 200 components = -0.0844535 Jy ! Clean residual min=-0.025075 max=0.051242 Jy/beam ! Clean residual mean=0.000690 rms=0.011918 Jy/beam ! Combined flux in latest and established models = 1.50388 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 1.50388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177716Jy sigma=3.168657 ! Fit after self-cal, rms=0.177532Jy sigma=3.167137 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177532Jy sigma=3.167137 ! Fit after self-cal, rms=0.154734Jy sigma=2.731042 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000829892 Jy ! Component: 100 - total flux cleaned = -0.00083944 Jy ! Component: 150 - total flux cleaned = -0.000640882 Jy ! Component: 200 - total flux cleaned = -0.00045517 Jy ! Total flux subtracted in 200 components = -0.00045517 Jy ! Clean residual min=-0.025419 max=0.051391 Jy/beam ! Clean residual mean=0.000700 rms=0.011893 Jy/beam ! Combined flux in latest and established models = 1.50343 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 1.50343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154171Jy sigma=2.722035 ! Fit after self-cal, rms=0.153902Jy sigma=2.716616 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.224 x 10.29 at 3.216 degrees (North through East) ! Clean map min=-0.024951 max=1.2588 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153902Jy sigma=2.716616 ! Fit after self-cal, rms=0.130779Jy sigma=2.228391 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130779Jy sigma=2.228391 ! Fit after self-cal, rms=0.130772Jy sigma=2.228016 ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=10.34 mas, bpa=3.51 degrees ! Estimated noise=0.682689 mJy/beam. ! Added new window around map position (-19.5, -6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.060191 Jy ! Component: 100 - total flux cleaned = 0.0882903 Jy ! Component: 150 - total flux cleaned = 0.104881 Jy ! Component: 200 - total flux cleaned = 0.114579 Jy ! Total flux subtracted in 200 components = 0.114579 Jy ! Clean residual min=-0.020364 max=0.028664 Jy/beam ! Clean residual mean=0.000202 rms=0.007062 Jy/beam ! Combined flux in latest and established models = 1.61801 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 113 components and 1.61801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111326Jy sigma=1.742179 ! Fit after self-cal, rms=0.110367Jy sigma=1.730528 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110367Jy sigma=1.730528 ! Fit after self-cal, rms=0.108029Jy sigma=1.660519 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108029Jy sigma=1.660519 ! Fit after self-cal, rms=0.108031Jy sigma=1.660466 ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.33 mas, bpa=3.578 degrees ! Estimated noise=0.680653 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489136 Jy ! Component: 100 - total flux cleaned = 0.01148 Jy ! Component: 150 - total flux cleaned = 0.013934 Jy ! Component: 200 - total flux cleaned = 0.0158142 Jy ! Total flux subtracted in 200 components = 0.0158142 Jy ! Clean residual min=-0.018320 max=0.027207 Jy/beam ! Clean residual mean=0.000143 rms=0.006495 Jy/beam ! Combined flux in latest and established models = 1.63382 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 141 components and 1.63382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105827Jy sigma=1.613623 ! Fit after self-cal, rms=0.105466Jy sigma=1.611271 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.184 mas, bmaj=12.15 mas, bpa=17.31 degrees ! Estimated noise=0.856537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180359 Jy ! Component: 100 - total flux cleaned = 0.0198742 Jy ! Component: 150 - total flux cleaned = 0.0212871 Jy ! Component: 200 - total flux cleaned = 0.0227797 Jy ! Total flux subtracted in 200 components = 0.0227797 Jy ! Clean residual min=-0.023130 max=0.039749 Jy/beam ! Clean residual mean=0.000130 rms=0.009751 Jy/beam ! Combined flux in latest and established models = 1.6566 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 156 components and 1.6566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106835Jy sigma=1.637262 ! Fit after self-cal, rms=0.106265Jy sigma=1.622134 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.449 mas, bmaj=9.938 mas, bpa=2.853 degrees ! Estimated noise=1.40058 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.02074 Jy ! Component: 100 - total flux cleaned = 1.26854 Jy ! Component: 150 - total flux cleaned = 1.37152 Jy ! Component: 200 - total flux cleaned = 1.42384 Jy ! Total flux subtracted in 200 components = 1.42384 Jy ! Clean residual min=-0.025493 max=0.047968 Jy/beam ! Clean residual mean=0.000253 rms=0.007670 Jy/beam ! Combined flux in latest and established models = 1.42384 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.42384 Jy ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.33 mas, bpa=3.578 degrees ! Estimated noise=0.680653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700663 Jy ! Component: 100 - total flux cleaned = 0.111118 Jy ! Component: 150 - total flux cleaned = 0.139469 Jy ! Component: 200 - total flux cleaned = 0.160299 Jy ! Total flux subtracted in 200 components = 0.160299 Jy ! Clean residual min=-0.016838 max=0.025580 Jy/beam ! Clean residual mean=0.000274 rms=0.006498 Jy/beam ! Combined flux in latest and established models = 1.58414 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 59 components and 1.58414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.184 mas, bmaj=12.15 mas, bpa=17.31 degrees ! Estimated noise=0.856537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273968 Jy ! Component: 100 - total flux cleaned = 0.0458587 Jy ! Component: 150 - total flux cleaned = 0.0557471 Jy ! Component: 200 - total flux cleaned = 0.0597292 Jy ! Total flux subtracted in 200 components = 0.0597292 Jy ! Clean residual min=-0.021342 max=0.034509 Jy/beam ! Clean residual mean=0.000146 rms=0.009009 Jy/beam ! Combined flux in latest and established models = 1.64386 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 101 components and 1.64386 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.33 mas, bpa=3.578 degrees ! Estimated noise=0.680653 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105395 Jy ! Component: 100 - total flux cleaned = 0.00114849 Jy ! Component: 150 - total flux cleaned = 0.00147061 Jy ! Component: 200 - total flux cleaned = 0.00176119 Jy ! Total flux subtracted in 200 components = 0.00176119 Jy ! Clean residual min=-0.013941 max=0.022967 Jy/beam ! Clean residual mean=0.000068 rms=0.005276 Jy/beam ! Combined flux in latest and established models = 1.64563 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 139 components and 1.64563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090967Jy sigma=1.421076 ! Fit after self-cal, rms=0.087492Jy sigma=1.387126 wmodel J1800+7828_S_2006_02_16_yyk\_map.mod ! Writing 139 model components to file: J1800+7828_S_2006_02_16_yyk_map.mod wobs J1800+7828_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1800+7828_S_2006_02_16_yyk_uvs.fits wwins J1800+7828_S_2006_02_16_yyk\_map.win ! wwins: Wrote 3 windows to J1800+7828_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951049 Jy ! Component: 100 - total flux cleaned = 0.0170516 Jy ! Component: 150 - total flux cleaned = 0.0237211 Jy ! Component: 200 - total flux cleaned = 0.0282879 Jy ! Component: 250 - total flux cleaned = 0.0320258 Jy ! Component: 300 - total flux cleaned = 0.0356884 Jy ! Component: 350 - total flux cleaned = 0.0383691 Jy ! Component: 400 - total flux cleaned = 0.040532 Jy ! Component: 450 - total flux cleaned = 0.0422353 Jy ! Component: 500 - total flux cleaned = 0.0435278 Jy ! Component: 550 - total flux cleaned = 0.0441427 Jy ! Component: 600 - total flux cleaned = 0.0445825 Jy ! Component: 650 - total flux cleaned = 0.0448675 Jy ! Component: 700 - total flux cleaned = 0.0447415 Jy ! Component: 750 - total flux cleaned = 0.0446129 Jy ! Component: 800 - total flux cleaned = 0.0446064 Jy ! Component: 850 - total flux cleaned = 0.0449606 Jy ! Component: 900 - total flux cleaned = 0.0446122 Jy ! Component: 950 - total flux cleaned = 0.0444988 Jy ! Component: 1000 - total flux cleaned = 0.0442827 Jy ! Component: 1050 - total flux cleaned = 0.0440751 Jy ! Component: 1100 - total flux cleaned = 0.0437754 Jy ! Component: 1150 - total flux cleaned = 0.0438789 Jy ! Component: 1200 - total flux cleaned = 0.0436899 Jy ! Component: 1250 - total flux cleaned = 0.0435966 Jy ! Component: 1300 - total flux cleaned = 0.0435974 Jy ! Component: 1350 - total flux cleaned = 0.0437763 Jy ! Component: 1400 - total flux cleaned = 0.0440324 Jy ! Component: 1450 - total flux cleaned = 0.043948 Jy ! Component: 1500 - total flux cleaned = 0.0441945 Jy ! Component: 1550 - total flux cleaned = 0.0441925 Jy ! Component: 1600 - total flux cleaned = 0.0443453 Jy ! Component: 1650 - total flux cleaned = 0.0446487 Jy ! Component: 1700 - total flux cleaned = 0.0450168 Jy ! Component: 1750 - total flux cleaned = 0.0451597 Jy ! Component: 1800 - total flux cleaned = 0.045515 Jy ! Component: 1850 - total flux cleaned = 0.0457923 Jy ! Component: 1900 - total flux cleaned = 0.0458603 Jy ! Component: 1950 - total flux cleaned = 0.0461301 Jy ! Component: 2000 - total flux cleaned = 0.0461305 Jy ! Total flux subtracted in 2048 components = 0.0460667 Jy ! Clean residual min=-0.003851 max=0.005080 Jy/beam ! Clean residual mean=-0.000014 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 1.69169 Jy keep ! Adding 201 model components to the UV plane model. ! The established model now contains 336 components and 1.69169 Jy ![Exited script file: muppet] wmap "J1800+7828_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 10.33 at 3.578 degrees (North through East) ! Clean map min=-0.0074632 max=1.2561 Jy/beam ! Writing clean map to FITS file: J1800+7828_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.25614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00140382 device "J1800+7828_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1800+7828_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33527 0.33527 0.67054 1.34108 2.68216 5.36432 10.7286 21.4573 42.9146 85.8292 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 10.33 at 3.578 degrees (North through East) ! Clean map min=-0.0074632 max=1.2561 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1800+7828_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1800+7828_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1800+7828_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:21:07 2006