! Started logfile: J1751+0939_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:17:19 2006 obs J1751+0939_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1751+0939_S_2006_02_23_yyk_uva.fits ! AN table 1: 265 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.633711 visibilities/baseline/integration-bin. ! Found source: J1751+0939 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 30228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1751+0939_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.765472 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.676 mas, bpa=0.6172 degrees ! Estimated noise=1.74988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.628401 Jy ! Component: 100 - total flux cleaned = 0.742294 Jy ! Total flux subtracted in 100 components = 0.742294 Jy ! Clean residual min=-0.025510 max=0.029838 Jy/beam ! Clean residual mean=0.000064 rms=0.007314 Jy/beam ! Combined flux in latest and established models = 0.742294 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.742294 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.147829Jy sigma=2.508127 ! Fit after self-cal, rms=0.146838Jy sigma=2.493839 ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=6.676 mas, bpa=0.6172 degrees ! Estimated noise=1.74988 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=7.407 mas, bpa=-0.03771 degrees ! Estimated noise=1.50246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507174 Jy ! Component: 100 - total flux cleaned = 0.0768849 Jy ! Component: 150 - total flux cleaned = 0.0923102 Jy ! Component: 200 - total flux cleaned = 0.101495 Jy ! Total flux subtracted in 200 components = 0.101495 Jy ! Clean residual min=-0.023244 max=0.022853 Jy/beam ! Clean residual mean=-0.000134 rms=0.005868 Jy/beam ! Combined flux in latest and established models = 0.84379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 0.84379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128877Jy sigma=2.222030 ! Fit after self-cal, rms=0.128482Jy sigma=2.217492 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.008 x 7.407 at -0.03771 degrees (North through East) ! Clean map min=-0.023276 max=0.72088 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01936 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.98 KP 0.96 ! LA 1.19 MK 0.93 NL 0.93 OV 0.95 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.99463 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.02 KP 0.98 ! LA 1.18 MK 1.01 NL 0.95 OV 0.98 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.952877 ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.09 HN 1.01 KP 0.96 ! LA 0.93 MK 1.11 NL 1.03 OV 1.00 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03903 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 0.95 KP 0.88 ! LA 0.79 MK 1.10 NL 0.99 OV 0.84 ! PT 0.92 SC 1.10 ! ! ! Fit before self-cal, rms=0.128482Jy sigma=2.217492 ! Fit after self-cal, rms=0.089103Jy sigma=1.444037 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089103Jy sigma=1.444037 ! Fit after self-cal, rms=0.089034Jy sigma=1.443722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.58 mas, bpa=0.4053 degrees ! Estimated noise=1.50185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126684 Jy ! Component: 100 - total flux cleaned = 0.0129705 Jy ! Component: 150 - total flux cleaned = 0.0131978 Jy ! Component: 200 - total flux cleaned = 0.013203 Jy ! Total flux subtracted in 200 components = 0.013203 Jy ! Clean residual min=-0.006349 max=0.008643 Jy/beam ! Clean residual mean=0.000002 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.856993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.856993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087176Jy sigma=1.393758 ! Fit after self-cal, rms=0.086933Jy sigma=1.390325 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086933Jy sigma=1.390325 ! Fit after self-cal, rms=0.083996Jy sigma=1.350629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114594 Jy ! Component: 100 - total flux cleaned = 0.00131282 Jy ! Component: 150 - total flux cleaned = 0.00131581 Jy ! Component: 200 - total flux cleaned = 0.00132356 Jy ! Total flux subtracted in 200 components = 0.00132356 Jy ! Clean residual min=-0.005850 max=0.007669 Jy/beam ! Clean residual mean=-0.000001 rms=0.001947 Jy/beam ! Combined flux in latest and established models = 0.858316 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.858316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083719Jy sigma=1.342176 ! Fit after self-cal, rms=0.083249Jy sigma=1.337649 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 7.58 at 0.4053 degrees (North through East) ! Clean map min=-0.0057537 max=0.72525 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083249Jy sigma=1.337649 ! Fit after self-cal, rms=0.067661Jy sigma=0.973687 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067661Jy sigma=0.973687 ! Fit after self-cal, rms=0.067578Jy sigma=0.973069 ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.588 mas, bpa=0.2962 degrees ! Estimated noise=1.49857 mJy/beam. ! Added new window around map position (-4, 62.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855147 Jy ! Component: 100 - total flux cleaned = 0.012354 Jy ! Component: 150 - total flux cleaned = 0.0139205 Jy ! Component: 200 - total flux cleaned = 0.0144616 Jy ! Total flux subtracted in 200 components = 0.0144616 Jy ! Clean residual min=-0.005223 max=0.005215 Jy/beam ! Clean residual mean=-0.000002 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.872778 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 0.872778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066553Jy sigma=0.952977 ! Fit after self-cal, rms=0.066434Jy sigma=0.951718 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066434Jy sigma=0.951718 ! Fit after self-cal, rms=0.065046Jy sigma=0.930964 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065046Jy sigma=0.930964 ! Fit after self-cal, rms=0.065032Jy sigma=0.930874 ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.594 mas, bpa=0.2631 degrees ! Estimated noise=1.49844 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892039 Jy ! Component: 100 - total flux cleaned = 0.00127125 Jy ! Component: 150 - total flux cleaned = 0.00133684 Jy ! Component: 200 - total flux cleaned = 0.00127821 Jy ! Total flux subtracted in 200 components = 0.00127821 Jy ! Clean residual min=-0.004802 max=0.005016 Jy/beam ! Clean residual mean=0.000006 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.874056 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 129 components and 0.874056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064879Jy sigma=0.927606 ! Fit after self-cal, rms=0.064825Jy sigma=0.927077 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.519 mas, bmaj=11.28 mas, bpa=-3.179 degrees ! Estimated noise=1.93998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671204 Jy ! Component: 100 - total flux cleaned = 0.00101167 Jy ! Component: 150 - total flux cleaned = 0.00111562 Jy ! Component: 200 - total flux cleaned = 0.0011606 Jy ! Total flux subtracted in 200 components = 0.0011606 Jy ! Clean residual min=-0.004704 max=0.005204 Jy/beam ! Clean residual mean=0.000006 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.875217 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.875216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064877Jy sigma=0.927120 ! Fit after self-cal, rms=0.064855Jy sigma=0.926819 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.536 mas, bmaj=6.713 mas, bpa=0.8057 degrees ! Estimated noise=1.75684 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.625664 Jy ! Component: 100 - total flux cleaned = 0.740395 Jy ! Component: 150 - total flux cleaned = 0.781237 Jy ! Component: 200 - total flux cleaned = 0.80475 Jy ! Total flux subtracted in 200 components = 0.80475 Jy ! Clean residual min=-0.009138 max=0.010691 Jy/beam ! Clean residual mean=0.000062 rms=0.002664 Jy/beam ! Combined flux in latest and established models = 0.80475 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.80475 Jy ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.594 mas, bpa=0.2631 degrees ! Estimated noise=1.49844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.019586 Jy ! Component: 100 - total flux cleaned = 0.031793 Jy ! Component: 150 - total flux cleaned = 0.0403411 Jy ! Component: 200 - total flux cleaned = 0.0467773 Jy ! Total flux subtracted in 200 components = 0.0467773 Jy ! Clean residual min=-0.006052 max=0.005567 Jy/beam ! Clean residual mean=0.000027 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.851527 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 99 components and 0.851527 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.519 mas, bmaj=11.28 mas, bpa=-3.179 degrees ! Estimated noise=1.93998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825152 Jy ! Component: 100 - total flux cleaned = 0.0131284 Jy ! Component: 150 - total flux cleaned = 0.0164724 Jy ! Component: 200 - total flux cleaned = 0.0188678 Jy ! Total flux subtracted in 200 components = 0.0188678 Jy ! Clean residual min=-0.005187 max=0.005393 Jy/beam ! Clean residual mean=0.000007 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.870395 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 158 components and 0.870394 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.594 mas, bpa=0.2631 degrees ! Estimated noise=1.49844 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302747 Jy ! Component: 100 - total flux cleaned = 0.000400262 Jy ! Component: 150 - total flux cleaned = 0.000903345 Jy ! Component: 200 - total flux cleaned = 0.00147156 Jy ! Total flux subtracted in 200 components = 0.00147156 Jy ! Clean residual min=-0.004589 max=0.004824 Jy/beam ! Clean residual mean=0.000007 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.871866 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 179 components and 0.871866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064824Jy sigma=0.926863 ! Fit after self-cal, rms=0.064800Jy sigma=0.926348 wmodel J1751+0939_S_2006_02_23_yyk\_map.mod ! Writing 179 model components to file: J1751+0939_S_2006_02_23_yyk_map.mod wobs J1751+0939_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1751+0939_S_2006_02_23_yyk_uvs.fits wwins J1751+0939_S_2006_02_23_yyk\_map.win ! wwins: Wrote 3 windows to J1751+0939_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909981 Jy ! Component: 100 - total flux cleaned = 0.000996285 Jy ! Component: 150 - total flux cleaned = 0.000923051 Jy ! Component: 200 - total flux cleaned = 0.000992581 Jy ! Component: 250 - total flux cleaned = 0.000861732 Jy ! Component: 300 - total flux cleaned = 0.000494449 Jy ! Component: 350 - total flux cleaned = 0.000201178 Jy ! Component: 400 - total flux cleaned = -2.13445e-05 Jy ! Component: 450 - total flux cleaned = -0.000287761 Jy ! Component: 500 - total flux cleaned = -0.000493539 Jy ! Component: 550 - total flux cleaned = -0.000742 Jy ! Component: 600 - total flux cleaned = -0.000981045 Jy ! Component: 650 - total flux cleaned = -0.00102605 Jy ! Component: 700 - total flux cleaned = -0.00111482 Jy ! Component: 750 - total flux cleaned = -0.00124566 Jy ! Component: 800 - total flux cleaned = -0.00149908 Jy ! Component: 850 - total flux cleaned = -0.00166311 Jy ! Component: 900 - total flux cleaned = -0.00186427 Jy ! Component: 950 - total flux cleaned = -0.00202164 Jy ! Component: 1000 - total flux cleaned = -0.00213604 Jy ! Component: 1050 - total flux cleaned = -0.00221052 Jy ! Component: 1100 - total flux cleaned = -0.00235573 Jy ! Component: 1150 - total flux cleaned = -0.00249846 Jy ! Component: 1200 - total flux cleaned = -0.00260302 Jy ! Component: 1250 - total flux cleaned = -0.00267098 Jy ! Component: 1300 - total flux cleaned = -0.00273784 Jy ! Component: 1350 - total flux cleaned = -0.00267155 Jy ! Component: 1400 - total flux cleaned = -0.00270412 Jy ! Component: 1450 - total flux cleaned = -0.00267239 Jy ! Component: 1500 - total flux cleaned = -0.0027041 Jy ! Component: 1550 - total flux cleaned = -0.00261108 Jy ! Component: 1600 - total flux cleaned = -0.00264134 Jy ! Component: 1650 - total flux cleaned = -0.00261122 Jy ! Component: 1700 - total flux cleaned = -0.00267045 Jy ! Component: 1750 - total flux cleaned = -0.00272885 Jy ! Component: 1800 - total flux cleaned = -0.00275814 Jy ! Component: 1850 - total flux cleaned = -0.00290083 Jy ! Component: 1900 - total flux cleaned = -0.00287224 Jy ! Component: 1950 - total flux cleaned = -0.00292802 Jy ! Component: 2000 - total flux cleaned = -0.00303833 Jy ! Total flux subtracted in 2048 components = -0.00303841 Jy ! Clean residual min=-0.001653 max=0.001421 Jy/beam ! Clean residual mean=0.000003 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.868828 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 312 components and 0.868828 Jy ![Exited script file: muppet] wmap "J1751+0939_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 7.594 at 0.2631 degrees (North through East) ! Clean map min=-0.0033643 max=0.73046 Jy/beam ! Writing clean map to FITS file: J1751+0939_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.73046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000528859 device "J1751+0939_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1751+0939_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.217202 0.217202 0.434405 0.868809 1.73762 3.47524 6.95048 13.901 27.8019 55.6038 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.73 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 7.594 at 0.2631 degrees (North through East) ! Clean map min=-0.0033643 max=0.73046 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1751+0939_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1751+0939_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1751+0939_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:18:03 2006