! Started logfile: J1743-0350_X_2006_02_14_yyk_uvs.log on Wed Jul 5 13:13:20 2006 obs J1743-0350_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1743-0350_X_2006_02_14_yyk_uva.fits ! AN table 1: 472 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.704284 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 59836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1743-0350_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 5.25739 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6476 mas, bmaj=1.86 mas, bpa=-7.85 degrees ! Estimated noise=1.73133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.15088 Jy ! Component: 100 - total flux cleaned = 5.31527 Jy ! Total flux subtracted in 100 components = 5.31527 Jy ! Clean residual min=-0.209822 max=0.373979 Jy/beam ! Clean residual mean=0.000060 rms=0.068448 Jy/beam ! Combined flux in latest and established models = 5.31527 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 5.31527 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992526Jy sigma=15.296173 ! Fit after self-cal, rms=0.985566Jy sigma=15.196447 ! Inverting map and beam ! Estimated beam: bmin=0.6476 mas, bmaj=1.86 mas, bpa=-7.85 degrees ! Estimated noise=1.73133 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8019 mas, bmaj=2.389 mas, bpa=-10.83 degrees ! Estimated noise=1.23449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.66226 Jy ! Component: 100 - total flux cleaned = 0.911038 Jy ! Component: 150 - total flux cleaned = 1.02456 Jy ! Component: 200 - total flux cleaned = 1.07323 Jy ! Total flux subtracted in 200 components = 1.07323 Jy ! Clean residual min=-0.126164 max=0.102218 Jy/beam ! Clean residual mean=-0.000314 rms=0.029757 Jy/beam ! Combined flux in latest and established models = 6.3885 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 32 components and 6.3885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.673114Jy sigma=8.912191 ! Fit after self-cal, rms=0.673403Jy sigma=8.906598 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8019 x 2.389 at -10.83 degrees (North through East) ! Clean map min=-0.11773 max=5.0427 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.989073 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.06 KP 0.99 ! LA 1.01 MK 1.01 NL 1.02 OV 1.00 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00867 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.05 KP 0.93 ! LA 0.97 MK 0.98 NL 1.00 OV 0.98 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00024 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.96 KP 0.86 ! LA 0.99 MK 1.04 NL 0.99 OV 1.01 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984438 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.10 HN 1.00 KP 0.90 ! LA 0.97 MK 1.07 NL 1.00 OV 1.05 ! PT 1.00* SC 1.04 ! ! ! Fit before self-cal, rms=0.673403Jy sigma=8.906598 ! Fit after self-cal, rms=0.578920Jy sigma=7.049732 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578920Jy sigma=7.049732 ! Fit after self-cal, rms=0.578883Jy sigma=7.049681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8158 mas, bmaj=2.422 mas, bpa=-10.86 degrees ! Estimated noise=1.23103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0443268 Jy ! Component: 100 - total flux cleaned = -0.0556385 Jy ! Component: 150 - total flux cleaned = -0.0589651 Jy ! Component: 200 - total flux cleaned = -0.0603564 Jy ! Total flux subtracted in 200 components = -0.0603564 Jy ! Clean residual min=-0.024483 max=0.019950 Jy/beam ! Clean residual mean=-0.000006 rms=0.005303 Jy/beam ! Combined flux in latest and established models = 6.32814 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 6.32814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.575151Jy sigma=6.993826 ! Fit after self-cal, rms=0.575339Jy sigma=6.991700 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.575339Jy sigma=6.991700 ! Fit after self-cal, rms=0.170449Jy sigma=2.379533 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883059 Jy ! Component: 100 - total flux cleaned = 0.00697531 Jy ! Component: 150 - total flux cleaned = 0.00535301 Jy ! Component: 200 - total flux cleaned = 0.00385756 Jy ! Total flux subtracted in 200 components = 0.00385756 Jy ! Clean residual min=-0.021986 max=0.016158 Jy/beam ! Clean residual mean=0.000001 rms=0.004537 Jy/beam ! Combined flux in latest and established models = 6.332 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 6.332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166256Jy sigma=2.321405 ! Fit after self-cal, rms=0.139599Jy sigma=2.153951 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8158 x 2.422 at -10.86 degrees (North through East) ! Clean map min=-0.021227 max=5.0692 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139599Jy sigma=2.153951 ! Fit after self-cal, rms=0.096597Jy sigma=1.308754 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096597Jy sigma=1.308754 ! Fit after self-cal, rms=0.094425Jy sigma=1.295036 ! Inverting map and beam ! Estimated beam: bmin=0.8158 mas, bmaj=2.421 mas, bpa=-10.79 degrees ! Estimated noise=1.2303 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00544037 Jy ! Component: 100 - total flux cleaned = -0.00713018 Jy ! Component: 150 - total flux cleaned = -0.00869665 Jy ! Component: 200 - total flux cleaned = -0.0105263 Jy ! Total flux subtracted in 200 components = -0.0105263 Jy ! Clean residual min=-0.017917 max=0.013205 Jy/beam ! Clean residual mean=-0.000013 rms=0.003503 Jy/beam ! Combined flux in latest and established models = 6.32148 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 6.32148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091330Jy sigma=1.247000 ! Fit after self-cal, rms=0.091112Jy sigma=1.244506 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091112Jy sigma=1.244506 ! Fit after self-cal, rms=0.088476Jy sigma=1.210112 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088476Jy sigma=1.210112 ! Fit after self-cal, rms=0.088458Jy sigma=1.210036 ! Inverting map and beam ! Estimated beam: bmin=0.8166 mas, bmaj=2.423 mas, bpa=-10.8 degrees ! Estimated noise=1.23059 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00393734 Jy ! Component: 100 - total flux cleaned = -0.00535055 Jy ! Component: 150 - total flux cleaned = -0.00699574 Jy ! Component: 200 - total flux cleaned = -0.00823079 Jy ! Total flux subtracted in 200 components = -0.00823079 Jy ! Clean residual min=-0.016554 max=0.012118 Jy/beam ! Clean residual mean=-0.000009 rms=0.003243 Jy/beam ! Combined flux in latest and established models = 6.31324 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 6.31325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085980Jy sigma=1.175026 ! Fit after self-cal, rms=0.085947Jy sigma=1.173842 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=3.54 mas, bpa=-5.069 degrees ! Estimated noise=1.59354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00683076 Jy ! Component: 100 - total flux cleaned = -0.00783679 Jy ! Component: 150 - total flux cleaned = -0.00830001 Jy ! Component: 200 - total flux cleaned = -0.00872873 Jy ! Total flux subtracted in 200 components = -0.00872873 Jy ! Clean residual min=-0.007234 max=0.006048 Jy/beam ! Clean residual mean=-0.000014 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 6.30452 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 6.30452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085547Jy sigma=1.171525 ! Fit after self-cal, rms=0.085522Jy sigma=1.169599 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6524 mas, bmaj=1.867 mas, bpa=-7.735 degrees ! Estimated noise=1.73941 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.17873 Jy ! Component: 100 - total flux cleaned = 5.32184 Jy ! Component: 150 - total flux cleaned = 5.83513 Jy ! Component: 200 - total flux cleaned = 6.08436 Jy ! Total flux subtracted in 200 components = 6.08436 Jy ! Clean residual min=-0.053782 max=0.084967 Jy/beam ! Clean residual mean=0.000048 rms=0.015985 Jy/beam ! Combined flux in latest and established models = 6.08436 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 6.08436 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8166 mas, bmaj=2.423 mas, bpa=-10.8 degrees ! Estimated noise=1.23059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.138524 Jy ! Component: 100 - total flux cleaned = 0.191919 Jy ! Component: 150 - total flux cleaned = 0.206746 Jy ! Component: 200 - total flux cleaned = 0.206781 Jy ! Total flux subtracted in 200 components = 0.206781 Jy ! Clean residual min=-0.018824 max=0.017237 Jy/beam ! Clean residual mean=-0.000008 rms=0.004224 Jy/beam ! Combined flux in latest and established models = 6.29114 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 6.29114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=3.54 mas, bpa=-5.069 degrees ! Estimated noise=1.59354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533642 Jy ! Component: 100 - total flux cleaned = 0.00681284 Jy ! Component: 150 - total flux cleaned = 0.00725086 Jy ! Component: 200 - total flux cleaned = 0.00758637 Jy ! Total flux subtracted in 200 components = 0.00758637 Jy ! Clean residual min=-0.006377 max=0.006809 Jy/beam ! Clean residual mean=-0.000014 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 6.29873 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 6.29873 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8166 mas, bmaj=2.423 mas, bpa=-10.8 degrees ! Estimated noise=1.23059 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387219 Jy ! Component: 100 - total flux cleaned = 0.00227452 Jy ! Component: 150 - total flux cleaned = 0.00227248 Jy ! Component: 200 - total flux cleaned = 0.00225954 Jy ! Total flux subtracted in 200 components = 0.00225954 Jy ! Clean residual min=-0.015411 max=0.012102 Jy/beam ! Clean residual mean=-0.000009 rms=0.003460 Jy/beam ! Combined flux in latest and established models = 6.30099 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 6.30099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090226Jy sigma=1.228419 ! Fit after self-cal, rms=0.089985Jy sigma=1.223928 wmodel J1743-0350_X_2006_02_14_yyk\_map.mod ! Writing 36 model components to file: J1743-0350_X_2006_02_14_yyk_map.mod wobs J1743-0350_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1743-0350_X_2006_02_14_yyk_uvs.fits wwins J1743-0350_X_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J1743-0350_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00679888 Jy ! Component: 100 - total flux cleaned = -0.0106732 Jy ! Component: 150 - total flux cleaned = -0.014499 Jy ! Component: 200 - total flux cleaned = -0.017711 Jy ! Component: 250 - total flux cleaned = -0.0201653 Jy ! Component: 300 - total flux cleaned = -0.0219384 Jy ! Component: 350 - total flux cleaned = -0.0234607 Jy ! Component: 400 - total flux cleaned = -0.0249343 Jy ! Component: 450 - total flux cleaned = -0.0263624 Jy ! Component: 500 - total flux cleaned = -0.0275712 Jy ! Component: 550 - total flux cleaned = -0.0289124 Jy ! Component: 600 - total flux cleaned = -0.030376 Jy ! Component: 650 - total flux cleaned = -0.0314846 Jy ! Component: 700 - total flux cleaned = -0.0328714 Jy ! Component: 750 - total flux cleaned = -0.0337745 Jy ! Component: 800 - total flux cleaned = -0.0348067 Jy ! Component: 850 - total flux cleaned = -0.0359574 Jy ! Component: 900 - total flux cleaned = -0.0367988 Jy ! Component: 950 - total flux cleaned = -0.0374852 Jy ! Component: 1000 - total flux cleaned = -0.0378909 Jy ! Component: 1050 - total flux cleaned = -0.0385516 Jy ! Component: 1100 - total flux cleaned = -0.0389401 Jy ! Component: 1150 - total flux cleaned = -0.0394481 Jy ! Component: 1200 - total flux cleaned = -0.0399474 Jy ! Component: 1250 - total flux cleaned = -0.0405578 Jy ! Component: 1300 - total flux cleaned = -0.0409204 Jy ! Component: 1350 - total flux cleaned = -0.0417478 Jy ! Component: 1400 - total flux cleaned = -0.042562 Jy ! Component: 1450 - total flux cleaned = -0.0432478 Jy ! Component: 1500 - total flux cleaned = -0.0440334 Jy ! Component: 1550 - total flux cleaned = -0.0449165 Jy ! Component: 1600 - total flux cleaned = -0.045568 Jy ! Component: 1650 - total flux cleaned = -0.0463148 Jy ! Component: 1700 - total flux cleaned = -0.0470505 Jy ! Component: 1750 - total flux cleaned = -0.0477728 Jy ! Component: 1800 - total flux cleaned = -0.0483821 Jy ! Component: 1850 - total flux cleaned = -0.0490804 Jy ! Component: 1900 - total flux cleaned = -0.0497671 Jy ! Component: 1950 - total flux cleaned = -0.0503479 Jy ! Component: 2000 - total flux cleaned = -0.0511098 Jy ! Total flux subtracted in 2048 components = -0.0519525 Jy ! Clean residual min=-0.004645 max=0.004653 Jy/beam ! Clean residual mean=-0.000007 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 6.24904 Jy keep ! Adding 87 model components to the UV plane model. ! The established model now contains 123 components and 6.24903 Jy ![Exited script file: muppet] wmap "J1743-0350_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8166 x 2.423 at -10.8 degrees (North through East) ! Clean map min=-0.013209 max=5.0806 Jy/beam ! Writing clean map to FITS file: J1743-0350_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 5.08059 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00159598 device "J1743-0350_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0942398 0.0942398 0.18848 0.376959 0.753919 1.50784 3.01567 6.03135 12.0627 24.1254 48.2508 96.5016 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0047 print "peak=",int(peak_flux*1000)/1000 ! peak= 5.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8166 x 2.423 at -10.8 degrees (North through East) ! Clean map min=-0.013209 max=5.0806 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1743-0350_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1743-0350_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1743-0350_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 13:14:05 2006