! Started logfile: J1743-0350_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:12:32 2006 obs J1743-0350_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1743-0350_S_2006_02_23_yyk_uva.fits ! AN table 1: 514 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.911284 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 84312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1743-0350_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 4.79494 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=6.887 mas, bpa=-2.925 degrees ! Estimated noise=1.53842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.0005 Jy ! Component: 100 - total flux cleaned = 4.62748 Jy ! Total flux subtracted in 100 components = 4.62748 Jy ! Clean residual min=-0.146458 max=0.175326 Jy/beam ! Clean residual mean=-0.001041 rms=0.043549 Jy/beam ! Combined flux in latest and established models = 4.62748 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 4.62748 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.798092Jy sigma=12.149769 ! Fit after self-cal, rms=0.798327Jy sigma=12.137061 ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=6.887 mas, bpa=-2.925 degrees ! Estimated noise=1.53842 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=7.717 mas, bpa=-2.586 degrees ! Estimated noise=1.05232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.239158 Jy ! Component: 100 - total flux cleaned = 0.340558 Jy ! Component: 150 - total flux cleaned = 0.372512 Jy ! Component: 200 - total flux cleaned = 0.375634 Jy ! Total flux subtracted in 200 components = 0.375634 Jy ! Clean residual min=-0.113538 max=0.118650 Jy/beam ! Clean residual mean=-0.001736 rms=0.034721 Jy/beam ! Combined flux in latest and established models = 5.00311 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 5.00311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.724930Jy sigma=11.303124 ! Fit after self-cal, rms=0.724819Jy sigma=11.302927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.178 x 7.717 at -2.586 degrees (North through East) ! Clean map min=-0.11228 max=4.5573 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00295 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.97 KP 0.94 ! LA 1.20 MK 0.94 NL 0.93 OV 0.95 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.997917 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 1.00 KP 0.96 ! LA 1.16 MK 1.00 NL 0.94 OV 0.98 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.960211 ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.11 HN 1.00 KP 0.95 ! LA 0.91 MK 1.12 NL 1.02 OV 0.99 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.05294 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 0.94 KP 0.87 ! LA 0.78 MK 1.09 NL 0.95 OV 0.86 ! PT 0.93 SC 1.08 ! ! ! Fit before self-cal, rms=0.724819Jy sigma=11.302927 ! Fit after self-cal, rms=0.447790Jy sigma=6.643932 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.447790Jy sigma=6.643932 ! Fit after self-cal, rms=0.447789Jy sigma=6.643914 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.865 mas, bpa=-2.026 degrees ! Estimated noise=1.05004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0141041 Jy ! Component: 100 - total flux cleaned = -0.0166778 Jy ! Component: 150 - total flux cleaned = -0.0177521 Jy ! Component: 200 - total flux cleaned = -0.0197034 Jy ! Total flux subtracted in 200 components = -0.0197034 Jy ! Clean residual min=-0.022704 max=0.023391 Jy/beam ! Clean residual mean=-0.000011 rms=0.006579 Jy/beam ! Combined flux in latest and established models = 4.98341 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 4.98341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441031Jy sigma=6.556990 ! Fit after self-cal, rms=0.440920Jy sigma=6.556615 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440920Jy sigma=6.556615 ! Fit after self-cal, rms=0.343180Jy sigma=5.421480 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000911094 Jy ! Component: 100 - total flux cleaned = -0.00245739 Jy ! Component: 150 - total flux cleaned = -0.0043649 Jy ! Component: 200 - total flux cleaned = -0.00552147 Jy ! Total flux subtracted in 200 components = -0.00552147 Jy ! Clean residual min=-0.019264 max=0.022132 Jy/beam ! Clean residual mean=-0.000005 rms=0.006078 Jy/beam ! Combined flux in latest and established models = 4.97789 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 4.97789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339928Jy sigma=5.389413 ! Fit after self-cal, rms=0.336634Jy sigma=5.353532 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 7.865 at -2.026 degrees (North through East) ! Clean map min=-0.017541 max=4.5968 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336634Jy sigma=5.353532 ! Fit after self-cal, rms=0.145309Jy sigma=2.109351 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145309Jy sigma=2.109351 ! Fit after self-cal, rms=0.144785Jy sigma=2.102735 ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=7.894 mas, bpa=-2.12 degrees ! Estimated noise=1.04947 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00924189 Jy ! Component: 100 - total flux cleaned = -0.00998526 Jy ! Component: 150 - total flux cleaned = -0.0119038 Jy ! Component: 200 - total flux cleaned = -0.012968 Jy ! Total flux subtracted in 200 components = -0.012968 Jy ! Clean residual min=-0.014409 max=0.013931 Jy/beam ! Clean residual mean=-0.000001 rms=0.003968 Jy/beam ! Combined flux in latest and established models = 4.96492 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 4.96492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138231Jy sigma=2.022188 ! Fit after self-cal, rms=0.138169Jy sigma=2.021529 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138169Jy sigma=2.021529 ! Fit after self-cal, rms=0.087691Jy sigma=1.191531 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087691Jy sigma=1.191531 ! Fit after self-cal, rms=0.087687Jy sigma=1.191434 ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=7.91 mas, bpa=-2.203 degrees ! Estimated noise=1.05026 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00518283 Jy ! Component: 100 - total flux cleaned = -0.00627212 Jy ! Component: 150 - total flux cleaned = -0.00721283 Jy ! Component: 200 - total flux cleaned = -0.00841715 Jy ! Total flux subtracted in 200 components = -0.00841715 Jy ! Clean residual min=-0.012702 max=0.011856 Jy/beam ! Clean residual mean=-0.000016 rms=0.003100 Jy/beam ! Combined flux in latest and established models = 4.9565 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 4.9565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082618Jy sigma=1.114523 ! Fit after self-cal, rms=0.082581Jy sigma=1.114361 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=13.3 mas, bpa=-0.3321 degrees ! Estimated noise=1.33485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0065424 Jy ! Component: 100 - total flux cleaned = -0.00718996 Jy ! Component: 150 - total flux cleaned = -0.00746045 Jy ! Component: 200 - total flux cleaned = -0.00763394 Jy ! Total flux subtracted in 200 components = -0.00763394 Jy ! Clean residual min=-0.008763 max=0.010594 Jy/beam ! Clean residual mean=-0.000018 rms=0.003570 Jy/beam ! Combined flux in latest and established models = 4.94887 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 4.94887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082590Jy sigma=1.115765 ! Fit after self-cal, rms=0.082549Jy sigma=1.115429 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=6.941 mas, bpa=-2.703 degrees ! Estimated noise=1.5255 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.97482 Jy ! Component: 100 - total flux cleaned = 4.57493 Jy ! Component: 150 - total flux cleaned = 4.7802 Jy ! Component: 200 - total flux cleaned = 4.87355 Jy ! Total flux subtracted in 200 components = 4.87355 Jy ! Clean residual min=-0.023633 max=0.032327 Jy/beam ! Clean residual mean=-0.000018 rms=0.006793 Jy/beam ! Combined flux in latest and established models = 4.87355 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 4.87355 Jy ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=7.91 mas, bpa=-2.203 degrees ! Estimated noise=1.05026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495749 Jy ! Component: 100 - total flux cleaned = 0.0695272 Jy ! Component: 150 - total flux cleaned = 0.0750851 Jy ! Component: 200 - total flux cleaned = 0.0756705 Jy ! Total flux subtracted in 200 components = 0.0756705 Jy ! Clean residual min=-0.013733 max=0.014172 Jy/beam ! Clean residual mean=-0.000006 rms=0.003456 Jy/beam ! Combined flux in latest and established models = 4.94922 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 4.94922 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=13.3 mas, bpa=-0.3321 degrees ! Estimated noise=1.33485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264434 Jy ! Component: 100 - total flux cleaned = -0.00245286 Jy ! Component: 150 - total flux cleaned = -0.00194293 Jy ! Component: 200 - total flux cleaned = -0.00166709 Jy ! Total flux subtracted in 200 components = -0.00166709 Jy ! Clean residual min=-0.008299 max=0.011310 Jy/beam ! Clean residual mean=-0.000015 rms=0.003643 Jy/beam ! Combined flux in latest and established models = 4.94756 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 4.94756 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=7.91 mas, bpa=-2.203 degrees ! Estimated noise=1.05026 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440091 Jy ! Component: 100 - total flux cleaned = 0.00559463 Jy ! Component: 150 - total flux cleaned = 0.00584558 Jy ! Component: 200 - total flux cleaned = 0.00559251 Jy ! Total flux subtracted in 200 components = 0.00559251 Jy ! Clean residual min=-0.013433 max=0.013312 Jy/beam ! Clean residual mean=-0.000012 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 4.95315 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 4.95315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083916Jy sigma=1.137507 ! Fit after self-cal, rms=0.083829Jy sigma=1.136872 wmodel J1743-0350_S_2006_02_23_yyk\_map.mod ! Writing 53 model components to file: J1743-0350_S_2006_02_23_yyk_map.mod wobs J1743-0350_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1743-0350_S_2006_02_23_yyk_uvs.fits wwins J1743-0350_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J1743-0350_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00070724 Jy ! Component: 100 - total flux cleaned = -0.00174853 Jy ! Component: 150 - total flux cleaned = -0.00175987 Jy ! Component: 200 - total flux cleaned = -0.00158792 Jy ! Component: 250 - total flux cleaned = -0.00141988 Jy ! Component: 300 - total flux cleaned = -0.00157439 Jy ! Component: 350 - total flux cleaned = -0.00232351 Jy ! Component: 400 - total flux cleaned = -0.0028927 Jy ! Component: 450 - total flux cleaned = -0.00330704 Jy ! Component: 500 - total flux cleaned = -0.00383578 Jy ! Component: 550 - total flux cleaned = -0.00434256 Jy ! Component: 600 - total flux cleaned = -0.00458688 Jy ! Component: 650 - total flux cleaned = -0.00494304 Jy ! Component: 700 - total flux cleaned = -0.00540159 Jy ! Component: 750 - total flux cleaned = -0.0060663 Jy ! Component: 800 - total flux cleaned = -0.00628071 Jy ! Component: 850 - total flux cleaned = -0.00711479 Jy ! Component: 900 - total flux cleaned = -0.00782771 Jy ! Component: 950 - total flux cleaned = -0.00862191 Jy ! Component: 1000 - total flux cleaned = -0.00949477 Jy ! Component: 1050 - total flux cleaned = -0.0103481 Jy ! Component: 1100 - total flux cleaned = -0.0111824 Jy ! Component: 1150 - total flux cleaned = -0.0120919 Jy ! Component: 1200 - total flux cleaned = -0.0128918 Jy ! Component: 1250 - total flux cleaned = -0.0135882 Jy ! Component: 1300 - total flux cleaned = -0.0141021 Jy ! Component: 1350 - total flux cleaned = -0.0148597 Jy ! Component: 1400 - total flux cleaned = -0.015519 Jy ! Component: 1450 - total flux cleaned = -0.016166 Jy ! Component: 1500 - total flux cleaned = -0.0167235 Jy ! Component: 1550 - total flux cleaned = -0.0173488 Jy ! Component: 1600 - total flux cleaned = -0.0175784 Jy ! Component: 1650 - total flux cleaned = -0.0181819 Jy ! Component: 1700 - total flux cleaned = -0.0186243 Jy ! Component: 1750 - total flux cleaned = -0.0189142 Jy ! Component: 1800 - total flux cleaned = -0.0192004 Jy ! Component: 1850 - total flux cleaned = -0.0193409 Jy ! Component: 1900 - total flux cleaned = -0.0195481 Jy ! Component: 1950 - total flux cleaned = -0.0196855 Jy ! Component: 2000 - total flux cleaned = -0.0199535 Jy ! Total flux subtracted in 2048 components = -0.0201508 Jy ! Clean residual min=-0.003389 max=0.003490 Jy/beam ! Clean residual mean=0.000001 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 4.933 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 183 components and 4.933 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 7.91 at -2.203 degrees (North through East) ! Clean map min=-0.0081007 max=4.6275 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.62752 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00128232 device "J1743-0350_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0831322 0.0831322 0.166264 0.332529 0.665058 1.33012 2.66023 5.32046 10.6409 21.2819 42.5637 85.1274 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(peak_flux*1000)/1000 ! peak= 4.627 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 7.91 at -2.203 degrees (North through East) ! Clean map min=-0.0081007 max=4.6275 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1743-0350_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1743-0350_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1743-0350_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:13:19 2006