! Started logfile: J1743-0350_S_2006_02_16_yyk_uvs.log on Wed Jul  5 13:11:43 2006
obs J1743-0350_S_2006_02_16_yyk_uva.fits
! Reading UV FITS file: J1743-0350_S_2006_02_16_yyk_uva.fits
! AN table 1: 472 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.925424 visibilities/baseline/integration-bin.
! Found source: J1743-0350
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2421 lines of history.
! 
! Reading 78624 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1743-0350_S_2006_02_16_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 4.57646 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.449 mas, bmaj=6.983 mas, bpa=-2.493 degrees
! Estimated noise=1.42474 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.77629 Jy
! Component: 100  -  total flux cleaned = 4.39201 Jy
! Total flux subtracted in 100 components = 4.39201 Jy
! Clean residual min=-0.207833 max=0.293350 Jy/beam
! Clean residual mean=-0.000516 rms=0.058859 Jy/beam
! Combined flux in latest and established models = 4.39201 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 4.39201 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.943962Jy  sigma=14.169674
! Fit after  self-cal, rms=0.943751Jy  sigma=14.158231
! Inverting map and beam 
! Estimated beam: bmin=2.449 mas, bmaj=6.983 mas, bpa=-2.493 degrees
! Estimated noise=1.42474 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.097 mas, bmaj=7.691 mas, bpa=-3.667 degrees
! Estimated noise=1.1031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.225364 Jy
! Component: 100  -  total flux cleaned = 0.313126 Jy
! Component: 150  -  total flux cleaned = 0.354149 Jy
! Component: 200  -  total flux cleaned = 0.363027 Jy
! Total flux subtracted in 200 components = 0.363027 Jy
! Clean residual min=-0.165492 max=0.259487 Jy/beam
! Clean residual mean=-0.001166 rms=0.055661 Jy/beam
! Combined flux in latest and established models = 4.75504 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 4.75504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.895467Jy  sigma=13.554104
! Fit after  self-cal, rms=0.895448Jy  sigma=13.553907
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.097 x 7.691 at -3.667 degrees (North through East)
! Clean map  min=-0.15955  max=4.3882 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.996215
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.91     HN        0.96     KP        0.92     
!   LA        1.19     MK        0.88     NL        1.32     OV        0.93     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.983176
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.98     KP        0.94     
!   LA        1.14     MK        0.96     NL        1.29     OV        0.96     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.94472
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.96     HN        0.98     KP        0.93     
!   LA        0.90     MK        1.06     NL        1.49     OV        0.97     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.04364
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        0.92     KP        0.86     
!   LA        0.76     MK        1.06     NL        1.25     OV        0.84     
!   PT        0.91     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.895448Jy  sigma=13.553907
! Fit after  self-cal, rms=0.478127Jy  sigma=7.707918
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.478127Jy  sigma=7.707918
! Fit after  self-cal, rms=0.478172Jy  sigma=7.707863
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.133 mas, bmaj=7.886 mas, bpa=-3.59 degrees
! Estimated noise=1.06755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.097608 Jy
! Component: 100  -  total flux cleaned = -0.125302 Jy
! Component: 150  -  total flux cleaned = -0.128987 Jy
! Component: 200  -  total flux cleaned = -0.12901 Jy
! Total flux subtracted in 200 components = -0.12901 Jy
! Clean residual min=-0.017902 max=0.019613 Jy/beam
! Clean residual mean=0.000002 rms=0.004445 Jy/beam
! Combined flux in latest and established models = 4.62603 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 56 components and 4.62603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473043Jy  sigma=7.473229
! Fit after  self-cal, rms=0.473114Jy  sigma=7.473108
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473114Jy  sigma=7.473108
! Fit after  self-cal, rms=0.333748Jy  sigma=5.447094
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-54.5, -54.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00751035 Jy
! Component: 100  -  total flux cleaned = 0.0120157 Jy
! Component: 150  -  total flux cleaned = 0.0136769 Jy
! Component: 200  -  total flux cleaned = 0.0132048 Jy
! Total flux subtracted in 200 components = 0.0132048 Jy
! Clean residual min=-0.017701 max=0.019727 Jy/beam
! Clean residual mean=-0.000008 rms=0.003653 Jy/beam
! Combined flux in latest and established models = 4.63923 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 69 components and 4.63923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.331065Jy  sigma=5.414408
! Fit after  self-cal, rms=0.327876Jy  sigma=5.370363
! Inverting map 
! Added new window around map position (63.5, 12).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695031 Jy
! Component: 100  -  total flux cleaned = 0.00636914 Jy
! Component: 150  -  total flux cleaned = 0.00636634 Jy
! Component: 200  -  total flux cleaned = 0.00636198 Jy
! Total flux subtracted in 200 components = 0.00636198 Jy
! Clean residual min=-0.013586 max=0.014001 Jy/beam
! Clean residual mean=-0.000034 rms=0.003504 Jy/beam
! Combined flux in latest and established models = 4.6456 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 4.6456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.326603Jy  sigma=5.345141
! Fit after  self-cal, rms=0.326397Jy  sigma=5.342130
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.133 x 7.886 at -3.59 degrees (North through East)
! Clean map  min=-0.030146  max=4.3143 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.326397Jy  sigma=5.342130
! Fit after  self-cal, rms=0.112033Jy  sigma=1.710358
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112033Jy  sigma=1.710358
! Fit after  self-cal, rms=0.112003Jy  sigma=1.709809
! Inverting map and beam 
! Estimated beam: bmin=3.139 mas, bmaj=7.903 mas, bpa=-3.555 degrees
! Estimated noise=1.06528 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00825323 Jy
! Component: 100  -  total flux cleaned = -0.0122086 Jy
! Component: 150  -  total flux cleaned = -0.0144408 Jy
! Component: 200  -  total flux cleaned = -0.0157408 Jy
! Total flux subtracted in 200 components = -0.0157408 Jy
! Clean residual min=-0.009491 max=0.009415 Jy/beam
! Clean residual mean=-0.000026 rms=0.002380 Jy/beam
! Combined flux in latest and established models = 4.62985 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 109 components and 4.62986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109368Jy  sigma=1.668879
! Fit after  self-cal, rms=0.109270Jy  sigma=1.667586
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109270Jy  sigma=1.667586
! Fit after  self-cal, rms=0.075725Jy  sigma=1.075040
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075725Jy  sigma=1.075040
! Fit after  self-cal, rms=0.075723Jy  sigma=1.075030
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=7.912 mas, bpa=-3.539 degrees
! Estimated noise=1.06535 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00524889 Jy
! Component: 100  -  total flux cleaned = -0.00619597 Jy
! Component: 150  -  total flux cleaned = -0.00647381 Jy
! Component: 200  -  total flux cleaned = -0.00675717 Jy
! Total flux subtracted in 200 components = -0.00675717 Jy
! Clean residual min=-0.008677 max=0.008602 Jy/beam
! Clean residual mean=-0.000038 rms=0.002134 Jy/beam
! Combined flux in latest and established models = 4.6231 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 118 components and 4.6231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073741Jy  sigma=1.041368
! Fit after  self-cal, rms=0.073686Jy  sigma=1.040655
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.628 mas, bmaj=13.13 mas, bpa=4.868 degrees
! Estimated noise=1.36724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -42.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688738 Jy
! Component: 100  -  total flux cleaned = 0.00900875 Jy
! Component: 150  -  total flux cleaned = 0.0103131 Jy
! Component: 200  -  total flux cleaned = 0.0107729 Jy
! Total flux subtracted in 200 components = 0.0107729 Jy
! Clean residual min=-0.003703 max=0.003023 Jy/beam
! Clean residual mean=-0.000046 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 4.63387 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 160 components and 4.63387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072499Jy  sigma=1.017184
! Fit after  self-cal, rms=0.072454Jy  sigma=1.016710
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.475 mas, bmaj=7.072 mas, bpa=-2.314 degrees
! Estimated noise=1.3881 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 3.68965 Jy
! Component: 100  -  total flux cleaned = 4.2584 Jy
! Component: 150  -  total flux cleaned = 4.45441 Jy
! Component: 200  -  total flux cleaned = 4.53615 Jy
! Total flux subtracted in 200 components = 4.53615 Jy
! Clean residual min=-0.025792 max=0.028499 Jy/beam
! Clean residual mean=0.000058 rms=0.006294 Jy/beam
! Combined flux in latest and established models = 4.53615 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 4.53615 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=7.912 mas, bpa=-3.539 degrees
! Estimated noise=1.06535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0479564 Jy
! Component: 100  -  total flux cleaned = 0.0533904 Jy
! Component: 150  -  total flux cleaned = 0.0550341 Jy
! Component: 200  -  total flux cleaned = 0.0564884 Jy
! Total flux subtracted in 200 components = 0.0564884 Jy
! Clean residual min=-0.010259 max=0.009009 Jy/beam
! Clean residual mean=0.000051 rms=0.002569 Jy/beam
! Combined flux in latest and established models = 4.59263 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 68 components and 4.59263 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.628 mas, bmaj=13.13 mas, bpa=4.868 degrees
! Estimated noise=1.36724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00756469 Jy
! Component: 100  -  total flux cleaned = 0.0113051 Jy
! Component: 150  -  total flux cleaned = 0.0146798 Jy
! Component: 200  -  total flux cleaned = 0.0173239 Jy
! Total flux subtracted in 200 components = 0.0173239 Jy
! Clean residual min=-0.006313 max=0.005025 Jy/beam
! Clean residual mean=0.000034 rms=0.001925 Jy/beam
! Combined flux in latest and established models = 4.60996 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 115 components and 4.60996 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=7.912 mas, bpa=-3.539 degrees
! Estimated noise=1.06535 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00292742 Jy
! Component: 100  -  total flux cleaned = -0.00190512 Jy
! Component: 150  -  total flux cleaned = -0.00095727 Jy
! Component: 200  -  total flux cleaned = -0.000354081 Jy
! Total flux subtracted in 200 components = -0.000354081 Jy
! Clean residual min=-0.006745 max=0.006360 Jy/beam
! Clean residual mean=0.000013 rms=0.001716 Jy/beam
! Combined flux in latest and established models = 4.6096 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 148 components and 4.6096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072155Jy  sigma=1.013176
! Fit after  self-cal, rms=0.071916Jy  sigma=1.009731
wmodel J1743-0350_S_2006_02_16_yyk\_map.mod
! Writing 148 model components to file: J1743-0350_S_2006_02_16_yyk_map.mod
wobs J1743-0350_S_2006_02_16_yyk\_uvs.fits
! Writing UV FITS file: J1743-0350_S_2006_02_16_yyk_uvs.fits
wwins J1743-0350_S_2006_02_16_yyk\_map.win
! wwins: Wrote 4 windows to J1743-0350_S_2006_02_16_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189471 Jy
! Component: 100  -  total flux cleaned = -0.00255459 Jy
! Component: 150  -  total flux cleaned = -0.00379345 Jy
! Component: 200  -  total flux cleaned = -0.00506195 Jy
! Component: 250  -  total flux cleaned = -0.00635722 Jy
! Component: 300  -  total flux cleaned = -0.00741294 Jy
! Component: 350  -  total flux cleaned = -0.00825495 Jy
! Component: 400  -  total flux cleaned = -0.00905964 Jy
! Component: 450  -  total flux cleaned = -0.00967898 Jy
! Component: 500  -  total flux cleaned = -0.0103474 Jy
! Component: 550  -  total flux cleaned = -0.0108482 Jy
! Component: 600  -  total flux cleaned = -0.011402 Jy
! Component: 650  -  total flux cleaned = -0.011803 Jy
! Component: 700  -  total flux cleaned = -0.0120619 Jy
! Component: 750  -  total flux cleaned = -0.0123772 Jy
! Component: 800  -  total flux cleaned = -0.0126233 Jy
! Component: 850  -  total flux cleaned = -0.0128654 Jy
! Component: 900  -  total flux cleaned = -0.0131578 Jy
! Component: 950  -  total flux cleaned = -0.0132729 Jy
! Component: 1000  -  total flux cleaned = -0.0133294 Jy
! Component: 1050  -  total flux cleaned = -0.0135479 Jy
! Component: 1100  -  total flux cleaned = -0.013601 Jy
! Component: 1150  -  total flux cleaned = -0.0137056 Jy
! Component: 1200  -  total flux cleaned = -0.0138583 Jy
! Component: 1250  -  total flux cleaned = -0.0139584 Jy
! Component: 1300  -  total flux cleaned = -0.0140077 Jy
! Component: 1350  -  total flux cleaned = -0.0142006 Jy
! Component: 1400  -  total flux cleaned = -0.0144375 Jy
! Component: 1450  -  total flux cleaned = -0.0144367 Jy
! Component: 1500  -  total flux cleaned = -0.0145745 Jy
! Component: 1550  -  total flux cleaned = -0.0147093 Jy
! Component: 1600  -  total flux cleaned = -0.014887 Jy
! Component: 1650  -  total flux cleaned = -0.0150177 Jy
! Component: 1700  -  total flux cleaned = -0.0151034 Jy
! Component: 1750  -  total flux cleaned = -0.0152303 Jy
! Component: 1800  -  total flux cleaned = -0.0153547 Jy
! Component: 1850  -  total flux cleaned = -0.0154361 Jy
! Component: 1900  -  total flux cleaned = -0.0155171 Jy
! Component: 1950  -  total flux cleaned = -0.0155168 Jy
! Component: 2000  -  total flux cleaned = -0.0155949 Jy
! Total flux subtracted in 2048 components = -0.0155563 Jy
! Clean residual min=-0.002077 max=0.002186 Jy/beam
! Clean residual mean=0.000005 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 4.59405 Jy
keep
! Adding 114 model components to the UV plane model.
! The established model now contains 260 components and 4.59405 Jy
![Exited script file: muppet]
wmap "J1743-0350_S_2006_02_16_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.143 x 7.912 at -3.539 degrees (North through East)
! Clean map  min=-0.0079563  max=4.3226 Jy/beam
! Writing clean map to FITS file: J1743-0350_S_2006_02_16_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 4.32255 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000728611 
device "J1743-0350_S_2006_02_16_yyk\_map.eps/VPS"
! Attempting to open device: 'J1743-0350_S_2006_02_16_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0505681 0.0505681 0.101136 0.202272 0.404545 0.80909 1.61818 3.23636 6.47272 12.9454 25.8909 51.7818
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0021 
print "peak=",int(peak_flux*1000)/1000
! peak= 4.322 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.143 x 7.912 at -3.539 degrees (North through East)
! Clean map  min=-0.0079563  max=4.3226 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1743-0350_S_2006_02_16_yyk\_map.gif/gif"
! Attempting to open device: 'J1743-0350_S_2006_02_16_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1743-0350_S_2006_02_16_yyk_uvs.log closed on Wed Jul  5 13:12:31 2006