! Started logfile: J1743-0350_S_2006_02_14_yyk_uvs.log on Wed Jul 5 13:10:58 2006 obs J1743-0350_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1743-0350_S_2006_02_14_yyk_uva.fits ! AN table 1: 472 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.704284 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 59836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1743-0350_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 4.91742 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.358 mas, bmaj=6.918 mas, bpa=-3.662 degrees ! Estimated noise=1.86945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.00909 Jy ! Component: 100 - total flux cleaned = 4.68328 Jy ! Total flux subtracted in 100 components = 4.68328 Jy ! Clean residual min=-0.149853 max=0.185605 Jy/beam ! Clean residual mean=-0.001232 rms=0.045319 Jy/beam ! Combined flux in latest and established models = 4.68329 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 4.68329 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.842245Jy sigma=12.993387 ! Fit after self-cal, rms=0.842367Jy sigma=12.977046 ! Inverting map and beam ! Estimated beam: bmin=2.358 mas, bmaj=6.918 mas, bpa=-3.662 degrees ! Estimated noise=1.86945 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=8.056 mas, bpa=-7.636 degrees ! Estimated noise=1.24511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.29033 Jy ! Component: 100 - total flux cleaned = 0.417829 Jy ! Component: 150 - total flux cleaned = 0.476415 Jy ! Component: 200 - total flux cleaned = 0.485197 Jy ! Total flux subtracted in 200 components = 0.485197 Jy ! Clean residual min=-0.115255 max=0.162405 Jy/beam ! Clean residual mean=-0.001016 rms=0.040653 Jy/beam ! Combined flux in latest and established models = 5.16848 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 5.16848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735081Jy sigma=11.766336 ! Fit after self-cal, rms=0.734975Jy sigma=11.766229 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.13 x 8.056 at -7.636 degrees (North through East) ! Clean map min=-0.10949 max=4.6611 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00375 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 1.01 KP 0.96 ! LA 1.23 MK 0.92 NL 0.95 OV 0.98 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994712 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.02 KP 0.98 ! LA 1.18 MK 1.01 NL 0.96 OV 0.99 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.965885 ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.97 HN 1.03 KP 0.97 ! LA 0.94 MK 1.11 NL 1.04 OV 1.02 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04783 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.94 KP 0.89 ! LA 0.79 MK 1.11 NL 0.96 OV 0.86 ! PT 1.00* SC 1.07 ! ! ! Fit before self-cal, rms=0.734975Jy sigma=11.766229 ! Fit after self-cal, rms=0.496535Jy sigma=7.197899 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.496535Jy sigma=7.197899 ! Fit after self-cal, rms=0.496514Jy sigma=7.197865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.224 mas, bpa=-7.099 degrees ! Estimated noise=1.24429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0197703 Jy ! Component: 100 - total flux cleaned = -0.0224831 Jy ! Component: 150 - total flux cleaned = -0.0246834 Jy ! Component: 200 - total flux cleaned = -0.0273668 Jy ! Total flux subtracted in 200 components = -0.0273668 Jy ! Clean residual min=-0.023640 max=0.026014 Jy/beam ! Clean residual mean=0.000145 rms=0.007230 Jy/beam ! Combined flux in latest and established models = 5.14111 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 5.14111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489623Jy sigma=7.121203 ! Fit after self-cal, rms=0.489520Jy sigma=7.120972 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489520Jy sigma=7.120972 ! Fit after self-cal, rms=0.413078Jy sigma=6.162621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114278 Jy ! Component: 100 - total flux cleaned = -0.00370255 Jy ! Component: 150 - total flux cleaned = -0.00650763 Jy ! Component: 200 - total flux cleaned = -0.00901718 Jy ! Total flux subtracted in 200 components = -0.00901718 Jy ! Clean residual min=-0.020777 max=0.025072 Jy/beam ! Clean residual mean=0.000118 rms=0.006876 Jy/beam ! Combined flux in latest and established models = 5.1321 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 5.1321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410109Jy sigma=6.139409 ! Fit after self-cal, rms=0.407728Jy sigma=6.112572 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 8.224 at -7.099 degrees (North through East) ! Clean map min=-0.019328 max=4.7072 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.407728Jy sigma=6.112572 ! Fit after self-cal, rms=0.351892Jy sigma=4.101776 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351892Jy sigma=4.101776 ! Fit after self-cal, rms=0.351719Jy sigma=4.099377 ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=8.255 mas, bpa=-7.183 degrees ! Estimated noise=1.24298 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0128995 Jy ! Component: 100 - total flux cleaned = -0.0154761 Jy ! Component: 150 - total flux cleaned = -0.0170379 Jy ! Component: 200 - total flux cleaned = -0.0183658 Jy ! Total flux subtracted in 200 components = -0.0183658 Jy ! Clean residual min=-0.016481 max=0.016706 Jy/beam ! Clean residual mean=0.000080 rms=0.004881 Jy/beam ! Combined flux in latest and established models = 5.11373 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 5.11373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348084Jy sigma=4.064572 ! Fit after self-cal, rms=0.348044Jy sigma=4.063935 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348044Jy sigma=4.063935 ! Fit after self-cal, rms=0.089640Jy sigma=1.349058 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089640Jy sigma=1.349058 ! Fit after self-cal, rms=0.089634Jy sigma=1.349000 ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=8.285 mas, bpa=-7.27 degrees ! Estimated noise=1.24295 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00529894 Jy ! Component: 100 - total flux cleaned = -0.00749655 Jy ! Component: 150 - total flux cleaned = -0.00930996 Jy ! Component: 200 - total flux cleaned = -0.0108296 Jy ! Total flux subtracted in 200 components = -0.0108296 Jy ! Clean residual min=-0.013900 max=0.011461 Jy/beam ! Clean residual mean=0.000063 rms=0.003944 Jy/beam ! Combined flux in latest and established models = 5.1029 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 5.1029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085040Jy sigma=1.277511 ! Fit after self-cal, rms=0.084970Jy sigma=1.276675 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.439 mas, bmaj=12.32 mas, bpa=-1.869 degrees ! Estimated noise=1.55997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00836674 Jy ! Component: 100 - total flux cleaned = -0.00922508 Jy ! Component: 150 - total flux cleaned = -0.00969509 Jy ! Component: 200 - total flux cleaned = -0.0101128 Jy ! Total flux subtracted in 200 components = -0.0101128 Jy ! Clean residual min=-0.013590 max=0.015999 Jy/beam ! Clean residual mean=0.000052 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 5.09279 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 5.09279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085001Jy sigma=1.274372 ! Fit after self-cal, rms=0.084909Jy sigma=1.273347 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=6.982 mas, bpa=-3.43 degrees ! Estimated noise=1.86239 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 4.00261 Jy ! Component: 100 - total flux cleaned = 4.65774 Jy ! Component: 150 - total flux cleaned = 4.88597 Jy ! Component: 200 - total flux cleaned = 4.99076 Jy ! Total flux subtracted in 200 components = 4.99076 Jy ! Clean residual min=-0.027415 max=0.037244 Jy/beam ! Clean residual mean=-0.000076 rms=0.008126 Jy/beam ! Combined flux in latest and established models = 4.99076 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 4.99076 Jy ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=8.285 mas, bpa=-7.27 degrees ! Estimated noise=1.24295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.063385 Jy ! Component: 100 - total flux cleaned = 0.0887609 Jy ! Component: 150 - total flux cleaned = 0.10015 Jy ! Component: 200 - total flux cleaned = 0.102072 Jy ! Total flux subtracted in 200 components = 0.102072 Jy ! Clean residual min=-0.012476 max=0.013914 Jy/beam ! Clean residual mean=0.000042 rms=0.003759 Jy/beam ! Combined flux in latest and established models = 5.09283 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 5.09283 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.439 mas, bmaj=12.32 mas, bpa=-1.869 degrees ! Estimated noise=1.55997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00496095 Jy ! Component: 100 - total flux cleaned = -0.00478279 Jy ! Component: 150 - total flux cleaned = -0.00433591 Jy ! Component: 200 - total flux cleaned = -0.00408391 Jy ! Total flux subtracted in 200 components = -0.00408391 Jy ! Clean residual min=-0.012297 max=0.016187 Jy/beam ! Clean residual mean=0.000041 rms=0.005030 Jy/beam ! Combined flux in latest and established models = 5.08874 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 5.08874 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=8.285 mas, bpa=-7.27 degrees ! Estimated noise=1.24295 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607405 Jy ! Component: 100 - total flux cleaned = 0.00707066 Jy ! Component: 150 - total flux cleaned = 0.00687201 Jy ! Component: 200 - total flux cleaned = 0.00631904 Jy ! Total flux subtracted in 200 components = 0.00631904 Jy ! Clean residual min=-0.012302 max=0.012816 Jy/beam ! Clean residual mean=0.000048 rms=0.003588 Jy/beam ! Combined flux in latest and established models = 5.09506 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 5.09506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083299Jy sigma=1.255119 ! Fit after self-cal, rms=0.083207Jy sigma=1.253979 wmodel J1743-0350_S_2006_02_14_yyk\_map.mod ! Writing 67 model components to file: J1743-0350_S_2006_02_14_yyk_map.mod wobs J1743-0350_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1743-0350_S_2006_02_14_yyk_uvs.fits wwins J1743-0350_S_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J1743-0350_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382867 Jy ! Component: 100 - total flux cleaned = 0.00585086 Jy ! Component: 150 - total flux cleaned = 0.00731237 Jy ! Component: 200 - total flux cleaned = 0.00884767 Jy ! Component: 250 - total flux cleaned = 0.0101165 Jy ! Component: 300 - total flux cleaned = 0.0108622 Jy ! Component: 350 - total flux cleaned = 0.0117069 Jy ! Component: 400 - total flux cleaned = 0.0126462 Jy ! Component: 450 - total flux cleaned = 0.0134153 Jy ! Component: 500 - total flux cleaned = 0.0139071 Jy ! Component: 550 - total flux cleaned = 0.0146179 Jy ! Component: 600 - total flux cleaned = 0.0154115 Jy ! Component: 650 - total flux cleaned = 0.0156277 Jy ! Component: 700 - total flux cleaned = 0.0159464 Jy ! Component: 750 - total flux cleaned = 0.01625 Jy ! Component: 800 - total flux cleaned = 0.0158512 Jy ! Component: 850 - total flux cleaned = 0.0153686 Jy ! Component: 900 - total flux cleaned = 0.0150894 Jy ! Component: 950 - total flux cleaned = 0.0147299 Jy ! Component: 1000 - total flux cleaned = 0.014377 Jy ! Component: 1050 - total flux cleaned = 0.0141215 Jy ! Component: 1100 - total flux cleaned = 0.0137875 Jy ! Component: 1150 - total flux cleaned = 0.0137057 Jy ! Component: 1200 - total flux cleaned = 0.0136249 Jy ! Component: 1250 - total flux cleaned = 0.0133107 Jy ! Component: 1300 - total flux cleaned = 0.0130795 Jy ! Component: 1350 - total flux cleaned = 0.0128544 Jy ! Component: 1400 - total flux cleaned = 0.0124886 Jy ! Component: 1450 - total flux cleaned = 0.0124165 Jy ! Component: 1500 - total flux cleaned = 0.0121353 Jy ! Component: 1550 - total flux cleaned = 0.0119279 Jy ! Component: 1600 - total flux cleaned = 0.0116572 Jy ! Component: 1650 - total flux cleaned = 0.0113278 Jy ! Component: 1700 - total flux cleaned = 0.011134 Jy ! Component: 1750 - total flux cleaned = 0.010816 Jy ! Component: 1800 - total flux cleaned = 0.010502 Jy ! Component: 1850 - total flux cleaned = 0.0101951 Jy ! Component: 1900 - total flux cleaned = 0.00989407 Jy ! Component: 1950 - total flux cleaned = 0.00965662 Jy ! Component: 2000 - total flux cleaned = 0.00942444 Jy ! Total flux subtracted in 2048 components = 0.00925238 Jy ! Clean residual min=-0.003367 max=0.002906 Jy/beam ! Clean residual mean=0.000019 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 5.10432 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 211 components and 5.10431 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 8.285 at -7.27 degrees (North through East) ! Clean map min=-0.0068654 max=4.7413 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.74132 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00107761 device "J1743-0350_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0681845 0.0681845 0.136369 0.272738 0.545476 1.09095 2.1819 4.3638 8.72761 17.4552 34.9104 69.8209 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(peak_flux*1000)/1000 ! peak= 4.741 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 8.285 at -7.27 degrees (North through East) ! Clean map min=-0.0068654 max=4.7413 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1743-0350_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1743-0350_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1743-0350_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 13:11:42 2006