! Started logfile: J1725+7708_X_2006_02_14_yyk_uvs.log on Wed Jul  5 13:09:17 2006
obs J1725+7708_X_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1725+7708_X_2006_02_14_yyk_uva.fits
! AN table 1: 879 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.796511 visibilities/baseline/integration-bin.
! Found source: J1725+7708
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2304 lines of history.
! 
! Reading 126024 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1725+7708_X_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0791713 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6768 mas, bmaj=2.792 mas, bpa=-5.179 degrees
! Estimated noise=1.56542 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0437978 Jy
! Component: 100  -  total flux cleaned = 0.0587401 Jy
! Total flux subtracted in 100 components = 0.0587401 Jy
! Clean residual min=-0.006150 max=0.006246 Jy/beam
! Clean residual mean=-0.000008 rms=0.001685 Jy/beam
! Combined flux in latest and established models = 0.0587401 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0587401 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.056879Jy  sigma=1.064175
! Fit after  self-cal, rms=0.055579Jy  sigma=1.062068
! Inverting map and beam 
! Estimated beam: bmin=0.677 mas, bmaj=2.794 mas, bpa=-5.169 degrees
! Estimated noise=1.56445 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9373 mas, bmaj=2.925 mas, bpa=-6.048 degrees
! Estimated noise=0.872131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114907 Jy
! Component: 100  -  total flux cleaned = 0.0176005 Jy
! Component: 150  -  total flux cleaned = 0.0212108 Jy
! Component: 200  -  total flux cleaned = 0.0234571 Jy
! Total flux subtracted in 200 components = 0.0234571 Jy
! Clean residual min=-0.004170 max=0.004577 Jy/beam
! Clean residual mean=-0.000001 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.0821971 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 40 components and 0.0821971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053885Jy  sigma=1.021959
! Fit after  self-cal, rms=0.053883Jy  sigma=1.021439
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9373 x 2.925 at -6.048 degrees (North through East)
! Clean map  min=-0.0040681  max=0.051508 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.992553
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.01     KP        0.93     
!   LA        1.05     MK        0.98     NL        1.04     OV        0.93     
!   PT        1.00*    SC        1.18     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.01173
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.08     HN        0.86     KP        0.93     
!   LA        1.14     MK        1.00*    NL        0.86     OV        1.01     
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.991793
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     HN        1.00*    KP        0.92     
!   LA        0.98     MK        1.00*    NL        0.96     OV        1.09     
!   PT        1.00*    SC        1.08     
! 
! 
! Fit before self-cal, rms=0.053883Jy  sigma=1.021439
! Fit after  self-cal, rms=0.052228Jy  sigma=1.017257
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052228Jy  sigma=1.017257
! Fit after  self-cal, rms=0.052231Jy  sigma=1.017211
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9573 mas, bmaj=2.885 mas, bpa=-6.722 degrees
! Estimated noise=0.864054 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163933 Jy
! Component: 100  -  total flux cleaned = 0.00205207 Jy
! Component: 150  -  total flux cleaned = 0.00218548 Jy
! Component: 200  -  total flux cleaned = 0.00227696 Jy
! Total flux subtracted in 200 components = 0.00227696 Jy
! Clean residual min=-0.003777 max=0.004575 Jy/beam
! Clean residual mean=0.000003 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.0844741 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.0844741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052180Jy  sigma=1.016227
! Fit after  self-cal, rms=0.052186Jy  sigma=1.016250
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052186Jy  sigma=1.016250
! Fit after  self-cal, rms=0.048874Jy  sigma=0.949921
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020163 Jy
! Component: 100  -  total flux cleaned = 0.00250578 Jy
! Component: 150  -  total flux cleaned = 0.00266379 Jy
! Component: 200  -  total flux cleaned = 0.00269028 Jy
! Total flux subtracted in 200 components = 0.00269028 Jy
! Clean residual min=-0.003732 max=0.004452 Jy/beam
! Clean residual mean=0.000003 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.0871644 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.0871644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048739Jy  sigma=0.947352
! Fit after  self-cal, rms=0.048553Jy  sigma=0.943394
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9573 x 2.885 at -6.722 degrees (North through East)
! Clean map  min=-0.0035832  max=0.054234 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.936 mas, bmaj=3.289 mas, bpa=-12.03 degrees
! Estimated noise=1.0664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332479 Jy
! Component: 100  -  total flux cleaned = -0.000334323 Jy
! Component: 150  -  total flux cleaned = -0.000334269 Jy
! Component: 200  -  total flux cleaned = -0.000298689 Jy
! Total flux subtracted in 200 components = -0.000298689 Jy
! Clean residual min=-0.005554 max=0.005413 Jy/beam
! Clean residual mean=0.000004 rms=0.001747 Jy/beam
! Combined flux in latest and established models = 0.0868657 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.0868657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048542Jy  sigma=0.943255
! Fit after  self-cal, rms=0.048529Jy  sigma=0.942857
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6876 mas, bmaj=2.757 mas, bpa=-5.501 degrees
! Estimated noise=1.56327 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0468551 Jy
! Component: 100  -  total flux cleaned = 0.0627977 Jy
! Component: 150  -  total flux cleaned = 0.0703809 Jy
! Component: 200  -  total flux cleaned = 0.0753021 Jy
! Total flux subtracted in 200 components = 0.0753021 Jy
! Clean residual min=-0.005431 max=0.004806 Jy/beam
! Clean residual mean=-0.000003 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.0753021 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0753021 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9573 mas, bmaj=2.885 mas, bpa=-6.722 degrees
! Estimated noise=0.864054 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00546131 Jy
! Component: 100  -  total flux cleaned = 0.00798287 Jy
! Component: 150  -  total flux cleaned = 0.00903916 Jy
! Component: 200  -  total flux cleaned = 0.00983921 Jy
! Total flux subtracted in 200 components = 0.00983921 Jy
! Clean residual min=-0.003818 max=0.004287 Jy/beam
! Clean residual mean=0.000001 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.0851413 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 50 components and 0.0851413 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.936 mas, bmaj=3.289 mas, bpa=-12.03 degrees
! Estimated noise=1.0664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000669771 Jy
! Component: 100  -  total flux cleaned = 0.000699922 Jy
! Component: 150  -  total flux cleaned = 0.000779239 Jy
! Component: 200  -  total flux cleaned = 0.000849251 Jy
! Total flux subtracted in 200 components = 0.000849251 Jy
! Clean residual min=-0.005582 max=0.005282 Jy/beam
! Clean residual mean=0.000003 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.0859905 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 0.0859905 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9573 mas, bmaj=2.885 mas, bpa=-6.722 degrees
! Estimated noise=0.864054 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119631 Jy
! Component: 100  -  total flux cleaned = 0.000203807 Jy
! Component: 150  -  total flux cleaned = 0.000251826 Jy
! Component: 200  -  total flux cleaned = 0.000293895 Jy
! Total flux subtracted in 200 components = 0.000293895 Jy
! Clean residual min=-0.003701 max=0.004331 Jy/beam
! Clean residual mean=0.000002 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.0862844 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 66 components and 0.0862844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048542Jy  sigma=0.943145
! Fit after  self-cal, rms=0.048555Jy  sigma=0.942954
wmodel J1725+7708_X_2006_02_14_yyk\_map.mod
! Writing 66 model components to file: J1725+7708_X_2006_02_14_yyk_map.mod
wobs J1725+7708_X_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1725+7708_X_2006_02_14_yyk_uvs.fits
wwins J1725+7708_X_2006_02_14_yyk\_map.win
! wwins: Wrote 1 windows to J1725+7708_X_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138022 Jy
! Component: 100  -  total flux cleaned = 0.00188843 Jy
! Component: 150  -  total flux cleaned = 0.00223463 Jy
! Component: 200  -  total flux cleaned = 0.00250036 Jy
! Component: 250  -  total flux cleaned = 0.00254998 Jy
! Component: 300  -  total flux cleaned = 0.00268699 Jy
! Component: 350  -  total flux cleaned = 0.0026449 Jy
! Component: 400  -  total flux cleaned = 0.00252497 Jy
! Component: 450  -  total flux cleaned = 0.00248622 Jy
! Component: 500  -  total flux cleaned = 0.00237705 Jy
! Component: 550  -  total flux cleaned = 0.00241396 Jy
! Component: 600  -  total flux cleaned = 0.00244806 Jy
! Component: 650  -  total flux cleaned = 0.00244827 Jy
! Component: 700  -  total flux cleaned = 0.00244868 Jy
! Component: 750  -  total flux cleaned = 0.00247855 Jy
! Component: 800  -  total flux cleaned = 0.00250701 Jy
! Component: 850  -  total flux cleaned = 0.00259262 Jy
! Component: 900  -  total flux cleaned = 0.00270322 Jy
! Component: 950  -  total flux cleaned = 0.00272981 Jy
! Component: 1000  -  total flux cleaned = 0.00275661 Jy
! Component: 1050  -  total flux cleaned = 0.00280912 Jy
! Component: 1100  -  total flux cleaned = 0.00296004 Jy
! Component: 1150  -  total flux cleaned = 0.00300892 Jy
! Component: 1200  -  total flux cleaned = 0.00308026 Jy
! Component: 1250  -  total flux cleaned = 0.00310348 Jy
! Component: 1300  -  total flux cleaned = 0.00310315 Jy
! Component: 1350  -  total flux cleaned = 0.00319282 Jy
! Component: 1400  -  total flux cleaned = 0.00332507 Jy
! Component: 1450  -  total flux cleaned = 0.00343308 Jy
! Component: 1500  -  total flux cleaned = 0.00353974 Jy
! Component: 1550  -  total flux cleaned = 0.00358237 Jy
! Component: 1600  -  total flux cleaned = 0.00370686 Jy
! Component: 1650  -  total flux cleaned = 0.00372697 Jy
! Component: 1700  -  total flux cleaned = 0.00374714 Jy
! Component: 1750  -  total flux cleaned = 0.00378727 Jy
! Component: 1800  -  total flux cleaned = 0.00380699 Jy
! Component: 1850  -  total flux cleaned = 0.00386557 Jy
! Component: 1900  -  total flux cleaned = 0.00388495 Jy
! Component: 1950  -  total flux cleaned = 0.00399982 Jy
! Component: 2000  -  total flux cleaned = 0.00398074 Jy
! Total flux subtracted in 2048 components = 0.00399954 Jy
! Clean residual min=-0.001110 max=0.001040 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.090284 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 198 components and 0.090284 Jy
![Exited script file: muppet]
wmap "J1725+7708_X_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9573 x 2.885 at -6.722 degrees (North through East)
! Clean map  min=-0.0017535  max=0.054053 Jy/beam
! Writing clean map to FITS file: J1725+7708_X_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0540528 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000336415 
device "J1725+7708_X_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1725+7708_X_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.86715 1.86715 3.73429 7.46859 14.9372 29.8743 59.7487
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.054 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9573 x 2.885 at -6.722 degrees (North through East)
! Clean map  min=-0.0017535  max=0.054053 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1725+7708_X_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1725+7708_X_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1725+7708_X_2006_02_14_yyk_uvs.log closed on Wed Jul  5 13:09:51 2006