! Started logfile: J1725+7708_S_2006_02_14_yyk_uvs.log on Wed Jul  5 13:08:22 2006
obs J1725+7708_S_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1725+7708_S_2006_02_14_yyk_uva.fits
! AN table 1: 879 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.796511 visibilities/baseline/integration-bin.
! Found source: J1725+7708
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2686 lines of history.
! 
! Reading 126024 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1725+7708_S_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.244127 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=10.08 mas, bpa=-1.6 degrees
! Estimated noise=1.30157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.19054 Jy
! Component: 100  -  total flux cleaned = 0.24409 Jy
! Total flux subtracted in 100 components = 0.24409 Jy
! Clean residual min=-0.012981 max=0.019427 Jy/beam
! Clean residual mean=-0.000147 rms=0.004751 Jy/beam
! Combined flux in latest and established models = 0.24409 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.24409 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.087391Jy  sigma=1.448041
! Fit after  self-cal, rms=0.087172Jy  sigma=1.442742
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=10.08 mas, bpa=-1.6 degrees
! Estimated noise=1.30157 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.898 mas, bmaj=10.27 mas, bpa=-0.9789 degrees
! Estimated noise=0.78045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.029187 Jy
! Component: 100  -  total flux cleaned = 0.04554 Jy
! Component: 150  -  total flux cleaned = 0.055724 Jy
! Component: 200  -  total flux cleaned = 0.0621835 Jy
! Total flux subtracted in 200 components = 0.0621835 Jy
! Clean residual min=-0.010615 max=0.017607 Jy/beam
! Clean residual mean=-0.000101 rms=0.003327 Jy/beam
! Combined flux in latest and established models = 0.306273 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.306273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078051Jy  sigma=1.274894
! Fit after  self-cal, rms=0.077990Jy  sigma=1.273133
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.898 x 10.27 at -0.9789 degrees (North through East)
! Clean map  min=-0.0093697  max=0.22493 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02387
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        0.93     
!   LA        1.13     MK        0.87     NL        0.85     OV        1.02     
!   PT        1.00*    SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.999289
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.00     KP        0.96     
!   LA        1.11     MK        0.97     NL        0.89     OV        1.01     
!   PT        1.00*    SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.963069
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.06     HN        1.02     KP        0.96     
!   LA        0.88     MK        1.10     NL        1.00     OV        1.06     
!   PT        1.00*    SC        1.11     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01747
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.94     KP        0.86     
!   LA        0.76     MK        1.10     NL        0.94     OV        0.92     
!   PT        1.00*    SC        1.23     
! 
! 
! Fit before self-cal, rms=0.077990Jy  sigma=1.273133
! Fit after  self-cal, rms=0.065966Jy  sigma=1.155784
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065966Jy  sigma=1.155784
! Fit after  self-cal, rms=0.066002Jy  sigma=1.155584
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.983 mas, bmaj=10.32 mas, bpa=-1.522 degrees
! Estimated noise=0.774604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -13.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165856 Jy
! Component: 100  -  total flux cleaned = 0.023734 Jy
! Component: 150  -  total flux cleaned = 0.0264542 Jy
! Component: 200  -  total flux cleaned = 0.0277236 Jy
! Total flux subtracted in 200 components = 0.0277236 Jy
! Clean residual min=-0.004590 max=0.005742 Jy/beam
! Clean residual mean=0.000001 rms=0.001374 Jy/beam
! Combined flux in latest and established models = 0.333997 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 64 components and 0.333997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063026Jy  sigma=1.092974
! Fit after  self-cal, rms=0.062788Jy  sigma=1.088234
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062788Jy  sigma=1.088234
! Fit after  self-cal, rms=0.057619Jy  sigma=0.997007
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375137 Jy
! Component: 100  -  total flux cleaned = 0.00529936 Jy
! Component: 150  -  total flux cleaned = 0.00583283 Jy
! Component: 200  -  total flux cleaned = 0.00591084 Jy
! Total flux subtracted in 200 components = 0.00591084 Jy
! Clean residual min=-0.004035 max=0.004678 Jy/beam
! Clean residual mean=0.000011 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.339908 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 96 components and 0.339908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057281Jy  sigma=0.991213
! Fit after  self-cal, rms=0.057067Jy  sigma=0.987901
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.983 x 10.32 at -1.522 degrees (North through East)
! Clean map  min=-0.0039632  max=0.22766 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057067Jy  sigma=0.987901
! Fit after  self-cal, rms=0.055060Jy  sigma=0.960881
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055060Jy  sigma=0.960881
! Fit after  self-cal, rms=0.055033Jy  sigma=0.960609
! Inverting map and beam 
! Estimated beam: bmin=2.974 mas, bmaj=10.28 mas, bpa=-1.531 degrees
! Estimated noise=0.769685 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257507 Jy
! Component: 100  -  total flux cleaned = 0.00265851 Jy
! Component: 150  -  total flux cleaned = 0.00279692 Jy
! Component: 200  -  total flux cleaned = 0.00279395 Jy
! Total flux subtracted in 200 components = 0.00279395 Jy
! Clean residual min=-0.003160 max=0.003495 Jy/beam
! Clean residual mean=0.000011 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.342702 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 124 components and 0.342702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054844Jy  sigma=0.956888
! Fit after  self-cal, rms=0.054823Jy  sigma=0.956682
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054823Jy  sigma=0.956682
! Fit after  self-cal, rms=0.053684Jy  sigma=0.933418
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053684Jy  sigma=0.933418
! Fit after  self-cal, rms=0.053685Jy  sigma=0.933387
! Inverting map and beam 
! Estimated beam: bmin=2.97 mas, bmaj=10.28 mas, bpa=-1.476 degrees
! Estimated noise=0.76959 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128222 Jy
! Component: 100  -  total flux cleaned = 0.00141523 Jy
! Component: 150  -  total flux cleaned = 0.00146655 Jy
! Component: 200  -  total flux cleaned = 0.0013699 Jy
! Total flux subtracted in 200 components = 0.0013699 Jy
! Clean residual min=-0.002983 max=0.003407 Jy/beam
! Clean residual mean=0.000011 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.344072 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 138 components and 0.344072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053583Jy  sigma=0.931382
! Fit after  self-cal, rms=0.053575Jy  sigma=0.931295
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.635 mas, bmaj=10.79 mas, bpa=-3.173 degrees
! Estimated noise=0.996974 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151505 Jy
! Component: 100  -  total flux cleaned = 0.00175404 Jy
! Component: 150  -  total flux cleaned = 0.00194372 Jy
! Component: 200  -  total flux cleaned = 0.00219052 Jy
! Total flux subtracted in 200 components = 0.00219052 Jy
! Clean residual min=-0.003355 max=0.002980 Jy/beam
! Clean residual mean=0.000013 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.346262 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 160 components and 0.346262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053700Jy  sigma=0.932424
! Fit after  self-cal, rms=0.053689Jy  sigma=0.932272
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.384 mas, bmaj=10.06 mas, bpa=-1.861 degrees
! Estimated noise=1.27503 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.187856 Jy
! Component: 100  -  total flux cleaned = 0.240737 Jy
! Component: 150  -  total flux cleaned = 0.26717 Jy
! Component: 200  -  total flux cleaned = 0.284415 Jy
! Total flux subtracted in 200 components = 0.284415 Jy
! Clean residual min=-0.007082 max=0.007965 Jy/beam
! Clean residual mean=-0.000058 rms=0.002322 Jy/beam
! Combined flux in latest and established models = 0.284415 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.284415 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.97 mas, bmaj=10.28 mas, bpa=-1.476 degrees
! Estimated noise=0.76959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162024 Jy
! Component: 100  -  total flux cleaned = 0.0273399 Jy
! Component: 150  -  total flux cleaned = 0.0355329 Jy
! Component: 200  -  total flux cleaned = 0.0411318 Jy
! Total flux subtracted in 200 components = 0.0411318 Jy
! Clean residual min=-0.004041 max=0.004329 Jy/beam
! Clean residual mean=-0.000017 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.325547 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 79 components and 0.325547 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.635 mas, bmaj=10.79 mas, bpa=-3.173 degrees
! Estimated noise=0.996974 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00832351 Jy
! Component: 100  -  total flux cleaned = 0.0131759 Jy
! Component: 150  -  total flux cleaned = 0.01613 Jy
! Component: 200  -  total flux cleaned = 0.0176007 Jy
! Total flux subtracted in 200 components = 0.0176007 Jy
! Clean residual min=-0.003655 max=0.002769 Jy/beam
! Clean residual mean=0.000001 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.343148 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 122 components and 0.343148 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.97 mas, bmaj=10.28 mas, bpa=-1.476 degrees
! Estimated noise=0.76959 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404677 Jy
! Component: 100  -  total flux cleaned = -0.000135846 Jy
! Component: 150  -  total flux cleaned = 0.000305605 Jy
! Component: 200  -  total flux cleaned = 0.000448413 Jy
! Total flux subtracted in 200 components = 0.000448413 Jy
! Clean residual min=-0.002989 max=0.002936 Jy/beam
! Clean residual mean=0.000004 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.343596 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 144 components and 0.343596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053608Jy  sigma=0.931352
! Fit after  self-cal, rms=0.053567Jy  sigma=0.930830
wmodel J1725+7708_S_2006_02_14_yyk\_map.mod
! Writing 144 model components to file: J1725+7708_S_2006_02_14_yyk_map.mod
wobs J1725+7708_S_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1725+7708_S_2006_02_14_yyk_uvs.fits
wwins J1725+7708_S_2006_02_14_yyk\_map.win
! wwins: Wrote 2 windows to J1725+7708_S_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000571355 Jy
! Component: 100  -  total flux cleaned = -0.000950663 Jy
! Component: 150  -  total flux cleaned = -0.00125494 Jy
! Component: 200  -  total flux cleaned = -0.00133435 Jy
! Component: 250  -  total flux cleaned = -0.00141016 Jy
! Component: 300  -  total flux cleaned = -0.00141079 Jy
! Component: 350  -  total flux cleaned = -0.00154804 Jy
! Component: 400  -  total flux cleaned = -0.00158012 Jy
! Component: 450  -  total flux cleaned = -0.00167464 Jy
! Component: 500  -  total flux cleaned = -0.00188911 Jy
! Component: 550  -  total flux cleaned = -0.00203688 Jy
! Component: 600  -  total flux cleaned = -0.00218055 Jy
! Component: 650  -  total flux cleaned = -0.0021241 Jy
! Component: 700  -  total flux cleaned = -0.00206958 Jy
! Component: 750  -  total flux cleaned = -0.00209617 Jy
! Component: 800  -  total flux cleaned = -0.00217421 Jy
! Component: 850  -  total flux cleaned = -0.00222564 Jy
! Component: 900  -  total flux cleaned = -0.00220042 Jy
! Component: 950  -  total flux cleaned = -0.00217592 Jy
! Component: 1000  -  total flux cleaned = -0.00220016 Jy
! Component: 1050  -  total flux cleaned = -0.00219979 Jy
! Component: 1100  -  total flux cleaned = -0.00219962 Jy
! Component: 1150  -  total flux cleaned = -0.00222229 Jy
! Component: 1200  -  total flux cleaned = -0.00222246 Jy
! Component: 1250  -  total flux cleaned = -0.00222295 Jy
! Component: 1300  -  total flux cleaned = -0.0022445 Jy
! Component: 1350  -  total flux cleaned = -0.00220222 Jy
! Component: 1400  -  total flux cleaned = -0.00222333 Jy
! Component: 1450  -  total flux cleaned = -0.00222317 Jy
! Component: 1500  -  total flux cleaned = -0.00220273 Jy
! Component: 1550  -  total flux cleaned = -0.00218271 Jy
! Component: 1600  -  total flux cleaned = -0.00218276 Jy
! Component: 1650  -  total flux cleaned = -0.00214385 Jy
! Component: 1700  -  total flux cleaned = -0.00208651 Jy
! Component: 1750  -  total flux cleaned = -0.00208651 Jy
! Component: 1800  -  total flux cleaned = -0.00214213 Jy
! Component: 1850  -  total flux cleaned = -0.00206899 Jy
! Component: 1900  -  total flux cleaned = -0.00215965 Jy
! Component: 1950  -  total flux cleaned = -0.00219543 Jy
! Component: 2000  -  total flux cleaned = -0.00224837 Jy
! Total flux subtracted in 2048 components = -0.00223102 Jy
! Clean residual min=-0.000964 max=0.001225 Jy/beam
! Clean residual mean=0.000003 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.341365 Jy
keep
! Adding 164 model components to the UV plane model.
! The established model now contains 308 components and 0.341365 Jy
![Exited script file: muppet]
wmap "J1725+7708_S_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.97 x 10.28 at -1.476 degrees (North through East)
! Clean map  min=-0.0020389  max=0.22686 Jy/beam
! Writing clean map to FITS file: J1725+7708_S_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.226864 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000353745 
device "J1725+7708_S_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1725+7708_S_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.467784 0.467784 0.935568 1.87114 3.74227 7.48455 14.9691 29.9382 59.8764
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.226 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.97 x 10.28 at -1.476 degrees (North through East)
! Clean map  min=-0.0020389  max=0.22686 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1725+7708_S_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1725+7708_S_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1725+7708_S_2006_02_14_yyk_uvs.log closed on Wed Jul  5 13:09:15 2006