! Started logfile: J1723+7653_X_2006_02_23_yyk_uvs.log on Wed Jul 5 13:07:23 2006 obs J1723+7653_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1723+7653_X_2006_02_23_yyk_uva.fits ! AN table 1: 863 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.997296 visibilities/baseline/integration-bin. ! Found source: J1723+7653 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2409 lines of history. ! ! Reading 154920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1723+7653_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.282699 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6329 mas, bmaj=2.782 mas, bpa=8.743 degrees ! Estimated noise=1.25237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.217126 Jy ! Component: 100 - total flux cleaned = 0.262925 Jy ! Total flux subtracted in 100 components = 0.262925 Jy ! Clean residual min=-0.010907 max=0.018437 Jy/beam ! Clean residual mean=-0.000001 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 0.262925 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.262925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097488Jy sigma=1.798376 ! Fit after self-cal, rms=0.097461Jy sigma=1.794952 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8311 mas, bmaj=2.904 mas, bpa=6.971 degrees ! Estimated noise=0.669829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, -8.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306891 Jy ! Component: 100 - total flux cleaned = 0.0436727 Jy ! Component: 150 - total flux cleaned = 0.0492551 Jy ! Component: 200 - total flux cleaned = 0.0509405 Jy ! Total flux subtracted in 200 components = 0.0509405 Jy ! Clean residual min=-0.007627 max=0.008752 Jy/beam ! Clean residual mean=0.000023 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 0.313865 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.313865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091524Jy sigma=1.655780 ! Fit after self-cal, rms=0.091368Jy sigma=1.653113 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8311 x 2.904 at 6.971 degrees (North through East) ! Clean map min=-0.007064 max=0.26049 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995416 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.03 KP 0.96 ! LA 1.01 MK 0.97 NL 1.06 OV 0.98 ! PT 1.00 SC 1.14 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01866 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.03 KP 0.89 ! LA 0.97 MK 0.92 NL 1.01 OV 0.97 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00657 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.92 KP 0.86 ! LA 0.96 MK 0.99 NL 1.00 OV 1.01 ! PT 1.02 SC 1.09 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.978034 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.09 HN 0.98 KP 0.88 ! LA 0.95 MK 1.00 NL 1.03 OV 1.02 ! PT 1.12 SC 1.13 ! ! ! Fit before self-cal, rms=0.091368Jy sigma=1.653113 ! Fit after self-cal, rms=0.092177Jy sigma=1.596805 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092177Jy sigma=1.596805 ! Fit after self-cal, rms=0.092185Jy sigma=1.597468 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8461 mas, bmaj=2.864 mas, bpa=7.007 degrees ! Estimated noise=0.666061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, 0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490921 Jy ! Component: 100 - total flux cleaned = 0.00533383 Jy ! Component: 150 - total flux cleaned = 0.00509342 Jy ! Component: 200 - total flux cleaned = 0.00498879 Jy ! Total flux subtracted in 200 components = 0.00498879 Jy ! Clean residual min=-0.002878 max=0.003259 Jy/beam ! Clean residual mean=0.000008 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.318854 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 61 components and 0.318854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091761Jy sigma=1.589328 ! Fit after self-cal, rms=0.091834Jy sigma=1.590553 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091834Jy sigma=1.590553 ! Fit after self-cal, rms=0.059112Jy sigma=1.054885 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217045 Jy ! Component: 100 - total flux cleaned = 0.00183728 Jy ! Component: 150 - total flux cleaned = 0.00163352 Jy ! Component: 200 - total flux cleaned = 0.00183472 Jy ! Total flux subtracted in 200 components = 0.00183472 Jy ! Clean residual min=-0.004446 max=0.003863 Jy/beam ! Clean residual mean=0.000010 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.320689 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.320689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056459Jy sigma=1.010740 ! Fit after self-cal, rms=0.055846Jy sigma=0.999902 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8461 x 2.864 at 7.007 degrees (North through East) ! Clean map min=-0.003568 max=0.27062 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055846Jy sigma=0.999902 ! Fit after self-cal, rms=0.052993Jy sigma=0.962760 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052993Jy sigma=0.962760 ! Fit after self-cal, rms=0.052981Jy sigma=0.962256 ! Inverting map and beam ! Estimated beam: bmin=0.8264 mas, bmaj=2.897 mas, bpa=7.034 degrees ! Estimated noise=0.658426 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497264 Jy ! Component: 100 - total flux cleaned = 0.000201011 Jy ! Component: 150 - total flux cleaned = -4.48388e-05 Jy ! Component: 200 - total flux cleaned = -0.000155145 Jy ! Total flux subtracted in 200 components = -0.000155145 Jy ! Clean residual min=-0.002083 max=0.002442 Jy/beam ! Clean residual mean=0.000007 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.320533 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 110 components and 0.320533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052845Jy sigma=0.959376 ! Fit after self-cal, rms=0.052841Jy sigma=0.959243 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052841Jy sigma=0.959243 ! Fit after self-cal, rms=0.051803Jy sigma=0.932872 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051803Jy sigma=0.932872 ! Fit after self-cal, rms=0.051808Jy sigma=0.932853 ! Inverting map and beam ! Estimated beam: bmin=0.8257 mas, bmaj=2.899 mas, bpa=7.017 degrees ! Estimated noise=0.658137 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004253 Jy ! Component: 100 - total flux cleaned = 0.000284884 Jy ! Component: 150 - total flux cleaned = 0.000157306 Jy ! Component: 200 - total flux cleaned = 0.000116492 Jy ! Total flux subtracted in 200 components = 0.000116492 Jy ! Clean residual min=-0.001988 max=0.002297 Jy/beam ! Clean residual mean=0.000007 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.32065 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 0.32065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051743Jy sigma=0.931607 ! Fit after self-cal, rms=0.051741Jy sigma=0.931560 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.062 mas, bmaj=3.316 mas, bpa=3.869 degrees ! Estimated noise=0.864025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073543 Jy ! Component: 100 - total flux cleaned = 0.000522725 Jy ! Component: 150 - total flux cleaned = 0.000383638 Jy ! Component: 200 - total flux cleaned = 0.00026503 Jy ! Total flux subtracted in 200 components = 0.00026503 Jy ! Clean residual min=-0.001786 max=0.002329 Jy/beam ! Clean residual mean=0.000017 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.320915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 132 components and 0.320915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051732Jy sigma=0.931272 ! Fit after self-cal, rms=0.051726Jy sigma=0.931158 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6314 mas, bmaj=2.775 mas, bpa=8.686 degrees ! Estimated noise=1.23036 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.223198 Jy ! Component: 100 - total flux cleaned = 0.265674 Jy ! Component: 150 - total flux cleaned = 0.284051 Jy ! Component: 200 - total flux cleaned = 0.293945 Jy ! Total flux subtracted in 200 components = 0.293945 Jy ! Clean residual min=-0.005505 max=0.008081 Jy/beam ! Clean residual mean=0.000000 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.293946 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.293946 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8257 mas, bmaj=2.899 mas, bpa=7.017 degrees ! Estimated noise=0.658137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127122 Jy ! Component: 100 - total flux cleaned = 0.0193602 Jy ! Component: 150 - total flux cleaned = 0.0223102 Jy ! Component: 200 - total flux cleaned = 0.0238907 Jy ! Total flux subtracted in 200 components = 0.0238907 Jy ! Clean residual min=-0.002488 max=0.002319 Jy/beam ! Clean residual mean=0.000002 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.317836 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 49 components and 0.317836 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.062 mas, bmaj=3.316 mas, bpa=3.869 degrees ! Estimated noise=0.864025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193542 Jy ! Component: 100 - total flux cleaned = 0.00226724 Jy ! Component: 150 - total flux cleaned = 0.00239578 Jy ! Component: 200 - total flux cleaned = 0.00245282 Jy ! Total flux subtracted in 200 components = 0.00245282 Jy ! Clean residual min=-0.002107 max=0.002345 Jy/beam ! Clean residual mean=0.000014 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.320289 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 83 components and 0.320289 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8257 mas, bmaj=2.899 mas, bpa=7.017 degrees ! Estimated noise=0.658137 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103272 Jy ! Component: 100 - total flux cleaned = 4.08761e-05 Jy ! Component: 150 - total flux cleaned = 9.29749e-05 Jy ! Component: 200 - total flux cleaned = 9.08993e-05 Jy ! Total flux subtracted in 200 components = 9.08993e-05 Jy ! Clean residual min=-0.002142 max=0.002120 Jy/beam ! Clean residual mean=0.000006 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.32038 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.32038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051668Jy sigma=0.930895 ! Fit after self-cal, rms=0.051645Jy sigma=0.930590 wmodel J1723+7653_X_2006_02_23_yyk\_map.mod ! Writing 105 model components to file: J1723+7653_X_2006_02_23_yyk_map.mod wobs J1723+7653_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1723+7653_X_2006_02_23_yyk_uvs.fits wwins J1723+7653_X_2006_02_23_yyk\_map.win ! wwins: Wrote 4 windows to J1723+7653_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413875 Jy ! Component: 100 - total flux cleaned = -0.000716798 Jy ! Component: 150 - total flux cleaned = -0.000810721 Jy ! Component: 200 - total flux cleaned = -0.000960161 Jy ! Component: 250 - total flux cleaned = -0.00113047 Jy ! Component: 300 - total flux cleaned = -0.00129457 Jy ! Component: 350 - total flux cleaned = -0.00145283 Jy ! Component: 400 - total flux cleaned = -0.00158034 Jy ! Component: 450 - total flux cleaned = -0.00170484 Jy ! Component: 500 - total flux cleaned = -0.00175408 Jy ! Component: 550 - total flux cleaned = -0.00180208 Jy ! Component: 600 - total flux cleaned = -0.00187284 Jy ! Component: 650 - total flux cleaned = -0.00196478 Jy ! Component: 700 - total flux cleaned = -0.00200958 Jy ! Component: 750 - total flux cleaned = -0.00218541 Jy ! Component: 800 - total flux cleaned = -0.00229303 Jy ! Component: 850 - total flux cleaned = -0.00237847 Jy ! Component: 900 - total flux cleaned = -0.00256624 Jy ! Component: 950 - total flux cleaned = -0.0026482 Jy ! Component: 1000 - total flux cleaned = -0.00276902 Jy ! Component: 1050 - total flux cleaned = -0.00280845 Jy ! Component: 1100 - total flux cleaned = -0.0028868 Jy ! Component: 1150 - total flux cleaned = -0.00296391 Jy ! Component: 1200 - total flux cleaned = -0.00300193 Jy ! Component: 1250 - total flux cleaned = -0.00311426 Jy ! Component: 1300 - total flux cleaned = -0.00318803 Jy ! Component: 1350 - total flux cleaned = -0.00329706 Jy ! Component: 1400 - total flux cleaned = -0.00336842 Jy ! Component: 1450 - total flux cleaned = -0.00342154 Jy ! Component: 1500 - total flux cleaned = -0.00343922 Jy ! Component: 1550 - total flux cleaned = -0.00350841 Jy ! Component: 1600 - total flux cleaned = -0.00347441 Jy ! Component: 1650 - total flux cleaned = -0.00354215 Jy ! Component: 1700 - total flux cleaned = -0.00349192 Jy ! Component: 1750 - total flux cleaned = -0.00345915 Jy ! Component: 1800 - total flux cleaned = -0.00344281 Jy ! Component: 1850 - total flux cleaned = -0.00345882 Jy ! Component: 1900 - total flux cleaned = -0.00344271 Jy ! Component: 1950 - total flux cleaned = -0.00337942 Jy ! Component: 2000 - total flux cleaned = -0.00341114 Jy ! Total flux subtracted in 2048 components = -0.00341108 Jy ! Clean residual min=-0.000885 max=0.000885 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.316969 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 238 components and 0.316969 Jy ![Exited script file: muppet] wmap "J1723+7653_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8257 x 2.899 at 7.017 degrees (North through East) ! Clean map min=-0.001806 max=0.26772 Jy/beam ! Writing clean map to FITS file: J1723+7653_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.267721 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000297422 device "J1723+7653_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1723+7653_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333281 0.333281 0.666563 1.33313 2.66625 5.3325 10.665 21.33 42.66 85.32 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.267 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8257 x 2.899 at 7.017 degrees (North through East) ! Clean map min=-0.001806 max=0.26772 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1723+7653_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1723+7653_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1723+7653_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:08:20 2006