! Started logfile: J1723+7653_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:06:35 2006 obs J1723+7653_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1723+7653_S_2006_02_23_yyk_uva.fits ! AN table 1: 863 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.997296 visibilities/baseline/integration-bin. ! Found source: J1723+7653 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2435 lines of history. ! ! Reading 154920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1723+7653_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.312081 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=10.28 mas, bpa=8.399 degrees ! Estimated noise=1.31366 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.242114 Jy ! Component: 100 - total flux cleaned = 0.300317 Jy ! Total flux subtracted in 100 components = 0.300317 Jy ! Clean residual min=-0.010809 max=0.017705 Jy/beam ! Clean residual mean=0.000023 rms=0.003457 Jy/beam ! Combined flux in latest and established models = 0.300317 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.300317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081710Jy sigma=1.421754 ! Fit after self-cal, rms=0.081428Jy sigma=1.416009 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252115 Jy ! Component: 100 - total flux cleaned = 0.0358284 Jy ! Total flux subtracted in 100 components = 0.0358284 Jy ! Clean residual min=-0.007856 max=0.008757 Jy/beam ! Clean residual mean=-0.000017 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.336145 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.336145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073724Jy sigma=1.292770 ! Fit after self-cal, rms=0.073717Jy sigma=1.292002 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=10.65 mas, bpa=8.755 degrees ! Estimated noise=0.69121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469248 Jy ! Component: 100 - total flux cleaned = 0.00597228 Jy ! Component: 150 - total flux cleaned = 0.00625174 Jy ! Component: 200 - total flux cleaned = 0.00656478 Jy ! Total flux subtracted in 200 components = 0.00656478 Jy ! Clean residual min=-0.007207 max=0.008454 Jy/beam ! Clean residual mean=-0.000088 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.34271 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.34271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073247Jy sigma=1.287183 ! Fit after self-cal, rms=0.073248Jy sigma=1.287340 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.132 x 10.65 at 8.755 degrees (North through East) ! Clean map min=-0.0069592 max=0.2947 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01131 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.98 KP 0.95 ! LA 1.20 MK 0.90 NL 0.94 OV 0.94 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993366 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 0.96 ! LA 1.18 MK 0.98 NL 0.97 OV 0.98 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.967505 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 1.03 KP 0.97 ! LA 0.93 MK 1.07 NL 1.05 OV 1.01 ! PT 1.09 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03666 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.01 HN 0.97 KP 0.88 ! LA 0.79 MK 1.12 NL 1.00 OV 0.87 ! PT 0.94 SC 1.18 ! ! ! Fit before self-cal, rms=0.073248Jy sigma=1.287340 ! Fit after self-cal, rms=0.063845Jy sigma=1.121389 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063845Jy sigma=1.121389 ! Fit after self-cal, rms=0.063859Jy sigma=1.121668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=10.61 mas, bpa=8.528 degrees ! Estimated noise=0.689972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000953723 Jy ! Component: 100 - total flux cleaned = -0.000789026 Jy ! Component: 150 - total flux cleaned = -0.000652961 Jy ! Component: 200 - total flux cleaned = -0.000487286 Jy ! Total flux subtracted in 200 components = -0.000487286 Jy ! Clean residual min=-0.002859 max=0.005088 Jy/beam ! Clean residual mean=0.000020 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.342223 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 0.342223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063764Jy sigma=1.120224 ! Fit after self-cal, rms=0.063785Jy sigma=1.120624 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063785Jy sigma=1.120624 ! Fit after self-cal, rms=0.057875Jy sigma=1.019234 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834628 Jy ! Component: 100 - total flux cleaned = 0.00101415 Jy ! Component: 150 - total flux cleaned = 0.0011466 Jy ! Component: 200 - total flux cleaned = 0.00123916 Jy ! Total flux subtracted in 200 components = 0.00123916 Jy ! Clean residual min=-0.002854 max=0.004729 Jy/beam ! Clean residual mean=0.000019 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.343462 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 0.343462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057803Jy sigma=1.018484 ! Fit after self-cal, rms=0.057659Jy sigma=1.016052 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.192 x 10.61 at 8.528 degrees (North through East) ! Clean map min=-0.0027741 max=0.29732 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057659Jy sigma=1.016052 ! Fit after self-cal, rms=0.055103Jy sigma=0.972896 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055103Jy sigma=0.972896 ! Fit after self-cal, rms=0.055093Jy sigma=0.972726 ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=10.59 mas, bpa=8.392 degrees ! Estimated noise=0.68908 mJy/beam. ! Added new window around map position (4.5, 1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487799 Jy ! Component: 100 - total flux cleaned = 0.0055191 Jy ! Component: 150 - total flux cleaned = 0.00574893 Jy ! Component: 200 - total flux cleaned = 0.00586446 Jy ! Total flux subtracted in 200 components = 0.00586446 Jy ! Clean residual min=-0.003011 max=0.003448 Jy/beam ! Clean residual mean=0.000021 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.349326 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 106 components and 0.349326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054744Jy sigma=0.965055 ! Fit after self-cal, rms=0.054721Jy sigma=0.964642 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054721Jy sigma=0.964642 ! Fit after self-cal, rms=0.053344Jy sigma=0.936868 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053344Jy sigma=0.936868 ! Fit after self-cal, rms=0.053344Jy sigma=0.936848 ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=10.59 mas, bpa=8.293 degrees ! Estimated noise=0.68773 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920783 Jy ! Component: 100 - total flux cleaned = 0.00123054 Jy ! Component: 150 - total flux cleaned = 0.00131769 Jy ! Component: 200 - total flux cleaned = 0.00135492 Jy ! Total flux subtracted in 200 components = 0.00135492 Jy ! Clean residual min=-0.002855 max=0.002991 Jy/beam ! Clean residual mean=0.000021 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.350681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 122 components and 0.350681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053274Jy sigma=0.935116 ! Fit after self-cal, rms=0.053267Jy sigma=0.935017 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.323 mas, bmaj=11.47 mas, bpa=8.467 degrees ! Estimated noise=0.866011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645572 Jy ! Component: 100 - total flux cleaned = 0.000788629 Jy ! Component: 150 - total flux cleaned = 0.000938773 Jy ! Component: 200 - total flux cleaned = 0.000939641 Jy ! Total flux subtracted in 200 components = 0.000939641 Jy ! Clean residual min=-0.002869 max=0.003695 Jy/beam ! Clean residual mean=0.000046 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.351621 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 0.351621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053281Jy sigma=0.935115 ! Fit after self-cal, rms=0.053280Jy sigma=0.935038 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.283 mas, bmaj=10.19 mas, bpa=8.212 degrees ! Estimated noise=1.3082 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.241612 Jy ! Component: 100 - total flux cleaned = 0.296803 Jy ! Component: 150 - total flux cleaned = 0.319751 Jy ! Component: 200 - total flux cleaned = 0.331146 Jy ! Total flux subtracted in 200 components = 0.331146 Jy ! Clean residual min=-0.004784 max=0.005072 Jy/beam ! Clean residual mean=0.000022 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.331146 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.331146 Jy ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=10.59 mas, bpa=8.293 degrees ! Estimated noise=0.68773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00876119 Jy ! Component: 100 - total flux cleaned = 0.0128792 Jy ! Component: 150 - total flux cleaned = 0.0155233 Jy ! Component: 200 - total flux cleaned = 0.0173766 Jy ! Total flux subtracted in 200 components = 0.0173766 Jy ! Clean residual min=-0.002610 max=0.003323 Jy/beam ! Clean residual mean=0.000021 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.348522 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 51 components and 0.348522 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.323 mas, bmaj=11.47 mas, bpa=8.467 degrees ! Estimated noise=0.866011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185063 Jy ! Component: 100 - total flux cleaned = 0.00254362 Jy ! Component: 150 - total flux cleaned = 0.00284207 Jy ! Component: 200 - total flux cleaned = 0.00300091 Jy ! Total flux subtracted in 200 components = 0.00300091 Jy ! Clean residual min=-0.002991 max=0.003861 Jy/beam ! Clean residual mean=0.000046 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.351523 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.351523 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=10.59 mas, bpa=8.293 degrees ! Estimated noise=0.68773 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364981 Jy ! Component: 100 - total flux cleaned = -0.000327734 Jy ! Component: 150 - total flux cleaned = -0.000359189 Jy ! Component: 200 - total flux cleaned = -0.00038566 Jy ! Total flux subtracted in 200 components = -0.00038566 Jy ! Clean residual min=-0.002566 max=0.002937 Jy/beam ! Clean residual mean=0.000020 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.351138 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 99 components and 0.351138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053233Jy sigma=0.934278 ! Fit after self-cal, rms=0.053226Jy sigma=0.934212 wmodel J1723+7653_S_2006_02_23_yyk\_map.mod ! Writing 99 model components to file: J1723+7653_S_2006_02_23_yyk_map.mod wobs J1723+7653_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1723+7653_S_2006_02_23_yyk_uvs.fits wwins J1723+7653_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1723+7653_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675584 Jy ! Component: 100 - total flux cleaned = 0.000806396 Jy ! Component: 150 - total flux cleaned = 0.00108095 Jy ! Component: 200 - total flux cleaned = 0.0012295 Jy ! Component: 250 - total flux cleaned = 0.0014056 Jy ! Component: 300 - total flux cleaned = 0.00150763 Jy ! Component: 350 - total flux cleaned = 0.00160446 Jy ! Component: 400 - total flux cleaned = 0.00160457 Jy ! Component: 450 - total flux cleaned = 0.00160489 Jy ! Component: 500 - total flux cleaned = 0.00168896 Jy ! Component: 550 - total flux cleaned = 0.00174294 Jy ! Component: 600 - total flux cleaned = 0.00187301 Jy ! Component: 650 - total flux cleaned = 0.00194859 Jy ! Component: 700 - total flux cleaned = 0.00207129 Jy ! Component: 750 - total flux cleaned = 0.00216655 Jy ! Component: 800 - total flux cleaned = 0.00225916 Jy ! Component: 850 - total flux cleaned = 0.0023047 Jy ! Component: 900 - total flux cleaned = 0.00232706 Jy ! Component: 950 - total flux cleaned = 0.00237077 Jy ! Component: 1000 - total flux cleaned = 0.00239193 Jy ! Component: 1050 - total flux cleaned = 0.00241174 Jy ! Component: 1100 - total flux cleaned = 0.00229009 Jy ! Component: 1150 - total flux cleaned = 0.00235005 Jy ! Component: 1200 - total flux cleaned = 0.00231097 Jy ! Component: 1250 - total flux cleaned = 0.00238813 Jy ! Component: 1300 - total flux cleaned = 0.00244497 Jy ! Component: 1350 - total flux cleaned = 0.00251948 Jy ! Component: 1400 - total flux cleaned = 0.00257471 Jy ! Component: 1450 - total flux cleaned = 0.00261097 Jy ! Component: 1500 - total flux cleaned = 0.00264673 Jy ! Component: 1550 - total flux cleaned = 0.00266422 Jy ! Component: 1600 - total flux cleaned = 0.00268159 Jy ! Component: 1650 - total flux cleaned = 0.00271576 Jy ! Component: 1700 - total flux cleaned = 0.00268182 Jy ! Component: 1750 - total flux cleaned = 0.00271558 Jy ! Component: 1800 - total flux cleaned = 0.00274858 Jy ! Component: 1850 - total flux cleaned = 0.00266669 Jy ! Component: 1900 - total flux cleaned = 0.00265069 Jy ! Component: 1950 - total flux cleaned = 0.00253892 Jy ! Component: 2000 - total flux cleaned = 0.002539 Jy ! Total flux subtracted in 2048 components = 0.00247619 Jy ! Clean residual min=-0.000893 max=0.000860 Jy/beam ! Clean residual mean=0.000006 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.353614 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 261 components and 0.353614 Jy ![Exited script file: muppet] wmap "J1723+7653_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 10.59 at 8.293 degrees (North through East) ! Clean map min=-0.0016541 max=0.29746 Jy/beam ! Writing clean map to FITS file: J1723+7653_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297457 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000325871 device "J1723+7653_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1723+7653_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.328657 0.328657 0.657315 1.31463 2.62926 5.25852 10.517 21.0341 42.0681 84.1363 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 10.59 at 8.293 degrees (North through East) ! Clean map min=-0.0016541 max=0.29746 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1723+7653_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1723+7653_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1723+7653_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:07:22 2006