! Started logfile: J1658+4737_X_2006_02_16_yyk_uvs.log on Wed Jul 5 13:03:34 2006 obs J1658+4737_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1658+4737_X_2006_02_16_yyk_uva.fits ! AN table 1: 230 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.750242 visibilities/baseline/integration-bin. ! Found source: J1658+4737 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 31060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1658+4737_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.564476 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.76 mas, bmaj=2.408 mas, bpa=-39.6 degrees ! Estimated noise=2.06165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.393501 Jy ! Component: 100 - total flux cleaned = 0.5536 Jy ! Total flux subtracted in 100 components = 0.5536 Jy ! Clean residual min=-0.047468 max=0.088894 Jy/beam ! Clean residual mean=-0.000474 rms=0.016991 Jy/beam ! Combined flux in latest and established models = 0.5536 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.5536 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.236162Jy sigma=4.530308 ! Fit after self-cal, rms=0.211047Jy sigma=4.210037 ! Inverting map and beam ! Estimated beam: bmin=0.76 mas, bmaj=2.408 mas, bpa=-39.6 degrees ! Estimated noise=2.06165 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9008 mas, bmaj=2.636 mas, bpa=-39.55 degrees ! Estimated noise=1.46772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.161747 Jy ! Component: 100 - total flux cleaned = 0.238518 Jy ! Component: 150 - total flux cleaned = 0.281557 Jy ! Component: 200 - total flux cleaned = 0.307615 Jy ! Total flux subtracted in 200 components = 0.307615 Jy ! Clean residual min=-0.023455 max=0.026212 Jy/beam ! Clean residual mean=0.000146 rms=0.006982 Jy/beam ! Combined flux in latest and established models = 0.861215 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.861215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119695Jy sigma=2.168441 ! Fit after self-cal, rms=0.115593Jy sigma=2.120933 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9008 x 2.636 at -39.55 degrees (North through East) ! Clean map min=-0.022659 max=0.47032 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.984929 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.02 KP 0.98 ! LA 0.99 MK 1.07 NL 1.27 OV 0.93 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998717 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.00 KP 0.90 ! LA 0.93 MK 1.05 NL 1.30 OV 0.92 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.989117 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.90 KP 0.84 ! LA 0.95 MK 1.05 NL 1.25 OV 0.95 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.972262 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 0.95 KP 0.89 ! LA 0.93 MK 1.05 NL 1.21 OV 0.99 ! PT 1.16 SC 1.01 ! ! ! Fit before self-cal, rms=0.115593Jy sigma=2.120933 ! Fit after self-cal, rms=0.090648Jy sigma=1.759657 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090648Jy sigma=1.759657 ! Fit after self-cal, rms=0.090656Jy sigma=1.759570 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9322 mas, bmaj=2.622 mas, bpa=-39.62 degrees ! Estimated noise=1.42871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0224815 Jy ! Component: 100 - total flux cleaned = -0.0295979 Jy ! Component: 150 - total flux cleaned = -0.0319153 Jy ! Component: 200 - total flux cleaned = -0.0334603 Jy ! Total flux subtracted in 200 components = -0.0334603 Jy ! Clean residual min=-0.010294 max=0.010385 Jy/beam ! Clean residual mean=0.000052 rms=0.002833 Jy/beam ! Combined flux in latest and established models = 0.827754 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.827754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086701Jy sigma=1.677976 ! Fit after self-cal, rms=0.086582Jy sigma=1.675428 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086582Jy sigma=1.675428 ! Fit after self-cal, rms=0.059503Jy sigma=1.087154 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519143 Jy ! Component: 100 - total flux cleaned = 0.00538693 Jy ! Component: 150 - total flux cleaned = 0.00525076 Jy ! Component: 200 - total flux cleaned = 0.0049904 Jy ! Total flux subtracted in 200 components = 0.0049904 Jy ! Clean residual min=-0.009639 max=0.010517 Jy/beam ! Clean residual mean=-0.000014 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.832745 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.832745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058783Jy sigma=1.067466 ! Fit after self-cal, rms=0.056977Jy sigma=1.029935 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9322 x 2.622 at -39.62 degrees (North through East) ! Clean map min=-0.0096276 max=0.47108 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056977Jy sigma=1.029935 ! Fit after self-cal, rms=0.055011Jy sigma=0.986434 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055011Jy sigma=0.986434 ! Fit after self-cal, rms=0.054950Jy sigma=0.984690 ! Inverting map and beam ! Estimated beam: bmin=0.9293 mas, bmaj=2.609 mas, bpa=-39.57 degrees ! Estimated noise=1.42607 mJy/beam. ! Added new window around map position (-3.2, 6.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117409 Jy ! Component: 100 - total flux cleaned = 0.0154624 Jy ! Component: 150 - total flux cleaned = 0.018078 Jy ! Component: 200 - total flux cleaned = 0.0197145 Jy ! Total flux subtracted in 200 components = 0.0197145 Jy ! Clean residual min=-0.007720 max=0.005710 Jy/beam ! Clean residual mean=0.000052 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.852459 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 93 components and 0.852459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052799Jy sigma=0.929320 ! Fit after self-cal, rms=0.052694Jy sigma=0.927556 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052694Jy sigma=0.927556 ! Fit after self-cal, rms=0.052020Jy sigma=0.911657 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052020Jy sigma=0.911657 ! Fit after self-cal, rms=0.052024Jy sigma=0.911650 ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.601 mas, bpa=-39.6 degrees ! Estimated noise=1.42312 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124522 Jy ! Component: 100 - total flux cleaned = -0.000789404 Jy ! Component: 150 - total flux cleaned = -0.000115191 Jy ! Component: 200 - total flux cleaned = 0.000252515 Jy ! Total flux subtracted in 200 components = 0.000252515 Jy ! Clean residual min=-0.006195 max=0.004888 Jy/beam ! Clean residual mean=0.000031 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.852712 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 105 components and 0.852712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051451Jy sigma=0.897184 ! Fit after self-cal, rms=0.051409Jy sigma=0.896511 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=3.059 mas, bpa=-40.65 degrees ! Estimated noise=1.78849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294808 Jy ! Component: 100 - total flux cleaned = 0.0034302 Jy ! Component: 150 - total flux cleaned = 0.00367928 Jy ! Component: 200 - total flux cleaned = 0.0036775 Jy ! Total flux subtracted in 200 components = 0.0036775 Jy ! Clean residual min=-0.005166 max=0.005504 Jy/beam ! Clean residual mean=0.000086 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.856389 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.856389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051258Jy sigma=0.892628 ! Fit after self-cal, rms=0.051231Jy sigma=0.891932 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7632 mas, bmaj=2.38 mas, bpa=-39.74 degrees ! Estimated noise=2.01997 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.400868 Jy ! Component: 100 - total flux cleaned = 0.572276 Jy ! Component: 150 - total flux cleaned = 0.665258 Jy ! Component: 200 - total flux cleaned = 0.717593 Jy ! Total flux subtracted in 200 components = 0.717593 Jy ! Clean residual min=-0.012415 max=0.021718 Jy/beam ! Clean residual mean=-0.000180 rms=0.004119 Jy/beam ! Combined flux in latest and established models = 0.717593 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.717593 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.601 mas, bpa=-39.6 degrees ! Estimated noise=1.42312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0511424 Jy ! Component: 100 - total flux cleaned = 0.075142 Jy ! Component: 150 - total flux cleaned = 0.0883631 Jy ! Component: 200 - total flux cleaned = 0.0977992 Jy ! Total flux subtracted in 200 components = 0.0977992 Jy ! Clean residual min=-0.005906 max=0.006491 Jy/beam ! Clean residual mean=-0.000075 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.815392 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 65 components and 0.815392 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=3.059 mas, bpa=-40.65 degrees ! Estimated noise=1.78849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010829 Jy ! Component: 100 - total flux cleaned = 0.0179776 Jy ! Component: 150 - total flux cleaned = 0.0232025 Jy ! Component: 200 - total flux cleaned = 0.0271875 Jy ! Total flux subtracted in 200 components = 0.0271875 Jy ! Clean residual min=-0.004310 max=0.005497 Jy/beam ! Clean residual mean=0.000017 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.84258 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 103 components and 0.84258 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9337 mas, bmaj=2.601 mas, bpa=-39.6 degrees ! Estimated noise=1.42312 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011525 Jy ! Component: 100 - total flux cleaned = 0.00256658 Jy ! Component: 150 - total flux cleaned = 0.00339904 Jy ! Component: 200 - total flux cleaned = 0.00381185 Jy ! Total flux subtracted in 200 components = 0.00381185 Jy ! Clean residual min=-0.004476 max=0.004892 Jy/beam ! Clean residual mean=0.000021 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.846392 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 130 components and 0.846392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051403Jy sigma=0.887650 ! Fit after self-cal, rms=0.051324Jy sigma=0.885804 wmodel J1658+4737_X_2006_02_16_yyk\_map.mod ! Writing 130 model components to file: J1658+4737_X_2006_02_16_yyk_map.mod wobs J1658+4737_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1658+4737_X_2006_02_16_yyk_uvs.fits wwins J1658+4737_X_2006_02_16_yyk\_map.win ! wwins: Wrote 3 windows to J1658+4737_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145779 Jy ! Component: 100 - total flux cleaned = 0.00221591 Jy ! Component: 150 - total flux cleaned = 0.00264306 Jy ! Component: 200 - total flux cleaned = 0.00291263 Jy ! Component: 250 - total flux cleaned = 0.00330151 Jy ! Component: 300 - total flux cleaned = 0.00361063 Jy ! Component: 350 - total flux cleaned = 0.00402867 Jy ! Component: 400 - total flux cleaned = 0.0043177 Jy ! Component: 450 - total flux cleaned = 0.00465246 Jy ! Component: 500 - total flux cleaned = 0.0048145 Jy ! Component: 550 - total flux cleaned = 0.00507619 Jy ! Component: 600 - total flux cleaned = 0.00532925 Jy ! Component: 650 - total flux cleaned = 0.00552693 Jy ! Component: 700 - total flux cleaned = 0.00562286 Jy ! Component: 750 - total flux cleaned = 0.00571732 Jy ! Component: 800 - total flux cleaned = 0.00585392 Jy ! Component: 850 - total flux cleaned = 0.00598619 Jy ! Component: 900 - total flux cleaned = 0.00598589 Jy ! Component: 950 - total flux cleaned = 0.00602751 Jy ! Component: 1000 - total flux cleaned = 0.00615214 Jy ! Component: 1050 - total flux cleaned = 0.00615217 Jy ! Component: 1100 - total flux cleaned = 0.00623178 Jy ! Component: 1150 - total flux cleaned = 0.00638695 Jy ! Component: 1200 - total flux cleaned = 0.00638683 Jy ! Component: 1250 - total flux cleaned = 0.00657452 Jy ! Component: 1300 - total flux cleaned = 0.00653756 Jy ! Component: 1350 - total flux cleaned = 0.00664625 Jy ! Component: 1400 - total flux cleaned = 0.00661035 Jy ! Component: 1450 - total flux cleaned = 0.00657591 Jy ! Component: 1500 - total flux cleaned = 0.0065065 Jy ! Component: 1550 - total flux cleaned = 0.00647226 Jy ! Component: 1600 - total flux cleaned = 0.00633877 Jy ! Component: 1650 - total flux cleaned = 0.00623976 Jy ! Component: 1700 - total flux cleaned = 0.00610999 Jy ! Component: 1750 - total flux cleaned = 0.00594959 Jy ! Component: 1800 - total flux cleaned = 0.00585498 Jy ! Component: 1850 - total flux cleaned = 0.00563745 Jy ! Component: 1900 - total flux cleaned = 0.00548455 Jy ! Component: 1950 - total flux cleaned = 0.00539385 Jy ! Component: 2000 - total flux cleaned = 0.00524474 Jy ! Total flux subtracted in 2048 components = 0.00506777 Jy ! Clean residual min=-0.001626 max=0.001501 Jy/beam ! Clean residual mean=0.000004 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.851459 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 272 components and 0.851459 Jy ![Exited script file: muppet] wmap "J1658+4737_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9337 x 2.601 at -39.6 degrees (North through East) ! Clean map min=-0.0028035 max=0.47914 Jy/beam ! Writing clean map to FITS file: J1658+4737_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.479138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00055809 device "J1658+4737_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1658+4737_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.349434 0.349434 0.698868 1.39774 2.79547 5.59094 11.1819 22.3638 44.7275 89.455 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.479 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9337 x 2.601 at -39.6 degrees (North through East) ! Clean map min=-0.0028035 max=0.47914 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1658+4737_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1658+4737_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1658+4737_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 13:04:17 2006