! Started logfile: J1658+4737_X_2006_02_14_yyk_uvs.log on Wed Jul 5 13:02:59 2006 obs J1658+4737_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1658+4737_X_2006_02_14_yyk_uva.fits ! AN table 1: 238 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698133 visibilities/baseline/integration-bin. ! Found source: J1658+4737 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2304 lines of history. ! ! Reading 29908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1658+4737_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.586697 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6875 mas, bmaj=2.427 mas, bpa=-37.33 degrees ! Estimated noise=2.10479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.435087 Jy ! Component: 100 - total flux cleaned = 0.619096 Jy ! Total flux subtracted in 100 components = 0.619096 Jy ! Clean residual min=-0.046063 max=0.067398 Jy/beam ! Clean residual mean=-0.000070 rms=0.013876 Jy/beam ! Combined flux in latest and established models = 0.619096 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.619096 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.178341Jy sigma=3.213498 ! Fit after self-cal, rms=0.176131Jy sigma=3.181612 ! Inverting map and beam ! Estimated beam: bmin=0.6875 mas, bmaj=2.427 mas, bpa=-37.33 degrees ! Estimated noise=2.10479 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=2.456 mas, bpa=-38.85 degrees ! Estimated noise=1.55168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.138968 Jy ! Component: 100 - total flux cleaned = 0.205532 Jy ! Component: 150 - total flux cleaned = 0.241741 Jy ! Component: 200 - total flux cleaned = 0.262954 Jy ! Total flux subtracted in 200 components = 0.262954 Jy ! Clean residual min=-0.016089 max=0.015922 Jy/beam ! Clean residual mean=0.000012 rms=0.004673 Jy/beam ! Combined flux in latest and established models = 0.88205 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.88205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085050Jy sigma=1.361915 ! Fit after self-cal, rms=0.082291Jy sigma=1.331324 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8854 x 2.456 at -38.85 degrees (North through East) ! Clean map min=-0.012925 max=0.52201 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998147 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.09 KP 0.97 ! LA 1.00 MK 0.99 NL 1.00 OV 0.98 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01835 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.05 KP 0.93 ! LA 0.95 MK 0.96 NL 0.98 OV 0.95 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00376 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.94 KP 0.88 ! LA 0.99 MK 1.06 NL 0.99 OV 0.99 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.993499 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 0.96 KP 0.89 ! LA 0.97 MK 1.02 NL 1.01 OV 1.04 ! PT 1.00* SC 1.06 ! ! ! Fit before self-cal, rms=0.082291Jy sigma=1.331324 ! Fit after self-cal, rms=0.073743Jy sigma=1.154942 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073743Jy sigma=1.154942 ! Fit after self-cal, rms=0.073763Jy sigma=1.154926 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8972 mas, bmaj=2.483 mas, bpa=-39.01 degrees ! Estimated noise=1.54188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579652 Jy ! Component: 100 - total flux cleaned = 0.0071179 Jy ! Component: 150 - total flux cleaned = 0.00789526 Jy ! Component: 200 - total flux cleaned = 0.00814963 Jy ! Total flux subtracted in 200 components = 0.00814963 Jy ! Clean residual min=-0.007718 max=0.010850 Jy/beam ! Clean residual mean=0.000011 rms=0.002303 Jy/beam ! Combined flux in latest and established models = 0.8902 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.8902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072840Jy sigma=1.132713 ! Fit after self-cal, rms=0.072676Jy sigma=1.131524 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072676Jy sigma=1.131524 ! Fit after self-cal, rms=0.059068Jy sigma=0.953394 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, 11.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111178 Jy ! Component: 100 - total flux cleaned = 0.017181 Jy ! Component: 150 - total flux cleaned = 0.0211887 Jy ! Component: 200 - total flux cleaned = 0.0240735 Jy ! Total flux subtracted in 200 components = 0.0240735 Jy ! Clean residual min=-0.006299 max=0.006665 Jy/beam ! Clean residual mean=0.000011 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.914273 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 80 components and 0.914273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057526Jy sigma=0.917343 ! Fit after self-cal, rms=0.056428Jy sigma=0.904387 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8972 x 2.483 at -39.01 degrees (North through East) ! Clean map min=-0.006122 max=0.52282 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056428Jy sigma=0.904387 ! Fit after self-cal, rms=0.055088Jy sigma=0.880782 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055088Jy sigma=0.880782 ! Fit after self-cal, rms=0.055029Jy sigma=0.879946 ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.482 mas, bpa=-39 degrees ! Estimated noise=1.53267 mJy/beam. ! Added new window around map position (-18.4, -12.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063652 Jy ! Component: 100 - total flux cleaned = 0.00827408 Jy ! Component: 150 - total flux cleaned = 0.00982782 Jy ! Component: 200 - total flux cleaned = 0.0108263 Jy ! Total flux subtracted in 200 components = 0.0108263 Jy ! Clean residual min=-0.004902 max=0.003964 Jy/beam ! Clean residual mean=0.000002 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.9251 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.9251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054170Jy sigma=0.861774 ! Fit after self-cal, rms=0.054152Jy sigma=0.861292 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054152Jy sigma=0.861292 ! Fit after self-cal, rms=0.053405Jy sigma=0.847885 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053405Jy sigma=0.847885 ! Fit after self-cal, rms=0.053407Jy sigma=0.847876 ! Inverting map and beam ! Estimated beam: bmin=0.8939 mas, bmaj=2.479 mas, bpa=-39.04 degrees ! Estimated noise=1.53122 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237172 Jy ! Component: 100 - total flux cleaned = 0.00319738 Jy ! Component: 150 - total flux cleaned = 0.00403797 Jy ! Component: 200 - total flux cleaned = 0.00471742 Jy ! Total flux subtracted in 200 components = 0.00471742 Jy ! Clean residual min=-0.004551 max=0.003442 Jy/beam ! Clean residual mean=0.000002 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.929817 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.929817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053134Jy sigma=0.842849 ! Fit after self-cal, rms=0.053131Jy sigma=0.842794 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.99 mas, bmaj=2.732 mas, bpa=-46.86 degrees ! Estimated noise=1.91901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176734 Jy ! Component: 100 - total flux cleaned = 0.0024172 Jy ! Component: 150 - total flux cleaned = 0.00271687 Jy ! Component: 200 - total flux cleaned = 0.00297777 Jy ! Total flux subtracted in 200 components = 0.00297777 Jy ! Clean residual min=-0.004060 max=0.002845 Jy/beam ! Clean residual mean=0.000003 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.932795 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 149 components and 0.932795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053063Jy sigma=0.841573 ! Fit after self-cal, rms=0.053055Jy sigma=0.841489 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6923 mas, bmaj=2.427 mas, bpa=-37.41 degrees ! Estimated noise=2.08395 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.43376 Jy ! Component: 100 - total flux cleaned = 0.616658 Jy ! Component: 150 - total flux cleaned = 0.719664 Jy ! Component: 200 - total flux cleaned = 0.779631 Jy ! Total flux subtracted in 200 components = 0.779631 Jy ! Clean residual min=-0.015613 max=0.023631 Jy/beam ! Clean residual mean=-0.000013 rms=0.005197 Jy/beam ! Combined flux in latest and established models = 0.77963 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.77963 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8939 mas, bmaj=2.479 mas, bpa=-39.04 degrees ! Estimated noise=1.53122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516652 Jy ! Component: 100 - total flux cleaned = 0.0787361 Jy ! Component: 150 - total flux cleaned = 0.0953934 Jy ! Component: 200 - total flux cleaned = 0.106335 Jy ! Total flux subtracted in 200 components = 0.106335 Jy ! Clean residual min=-0.007492 max=0.006266 Jy/beam ! Clean residual mean=-0.000003 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.885965 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.885965 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.99 mas, bmaj=2.732 mas, bpa=-46.86 degrees ! Estimated noise=1.91901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013404 Jy ! Component: 100 - total flux cleaned = 0.0220917 Jy ! Component: 150 - total flux cleaned = 0.0280017 Jy ! Component: 200 - total flux cleaned = 0.0310496 Jy ! Total flux subtracted in 200 components = 0.0310496 Jy ! Clean residual min=-0.005553 max=0.003993 Jy/beam ! Clean residual mean=-0.000002 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.917015 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 96 components and 0.917015 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8939 mas, bmaj=2.479 mas, bpa=-39.04 degrees ! Estimated noise=1.53122 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247356 Jy ! Component: 100 - total flux cleaned = 0.00536841 Jy ! Component: 150 - total flux cleaned = 0.0073105 Jy ! Component: 200 - total flux cleaned = 0.00904041 Jy ! Total flux subtracted in 200 components = 0.00904041 Jy ! Clean residual min=-0.004476 max=0.004290 Jy/beam ! Clean residual mean=-0.000001 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.926055 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 121 components and 0.926055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053615Jy sigma=0.852418 ! Fit after self-cal, rms=0.053526Jy sigma=0.851389 wmodel J1658+4737_X_2006_02_14_yyk\_map.mod ! Writing 121 model components to file: J1658+4737_X_2006_02_14_yyk_map.mod wobs J1658+4737_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1658+4737_X_2006_02_14_yyk_uvs.fits wwins J1658+4737_X_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J1658+4737_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169292 Jy ! Component: 100 - total flux cleaned = -0.00212527 Jy ! Component: 150 - total flux cleaned = -0.00245136 Jy ! Component: 200 - total flux cleaned = -0.00281869 Jy ! Component: 250 - total flux cleaned = -0.0029931 Jy ! Component: 300 - total flux cleaned = -0.00299543 Jy ! Component: 350 - total flux cleaned = -0.0029428 Jy ! Component: 400 - total flux cleaned = -0.00304383 Jy ! Component: 450 - total flux cleaned = -0.0032862 Jy ! Component: 500 - total flux cleaned = -0.00351982 Jy ! Component: 550 - total flux cleaned = -0.00370067 Jy ! Component: 600 - total flux cleaned = -0.00378775 Jy ! Component: 650 - total flux cleaned = -0.00395777 Jy ! Component: 700 - total flux cleaned = -0.00404037 Jy ! Component: 750 - total flux cleaned = -0.00412167 Jy ! Component: 800 - total flux cleaned = -0.00427875 Jy ! Component: 850 - total flux cleaned = -0.00439441 Jy ! Component: 900 - total flux cleaned = -0.00443199 Jy ! Component: 950 - total flux cleaned = -0.0045431 Jy ! Component: 1000 - total flux cleaned = -0.00465206 Jy ! Component: 1050 - total flux cleaned = -0.00479387 Jy ! Component: 1100 - total flux cleaned = -0.004863 Jy ! Component: 1150 - total flux cleaned = -0.00486324 Jy ! Component: 1200 - total flux cleaned = -0.00499714 Jy ! Component: 1250 - total flux cleaned = -0.00503 Jy ! Component: 1300 - total flux cleaned = -0.00515868 Jy ! Component: 1350 - total flux cleaned = -0.00519046 Jy ! Component: 1400 - total flux cleaned = -0.00537743 Jy ! Component: 1450 - total flux cleaned = -0.0052851 Jy ! Component: 1500 - total flux cleaned = -0.0052555 Jy ! Component: 1550 - total flux cleaned = -0.00540492 Jy ! Component: 1600 - total flux cleaned = -0.00540503 Jy ! Component: 1650 - total flux cleaned = -0.00543401 Jy ! Component: 1700 - total flux cleaned = -0.00546291 Jy ! Component: 1750 - total flux cleaned = -0.00554788 Jy ! Component: 1800 - total flux cleaned = -0.00554734 Jy ! Component: 1850 - total flux cleaned = -0.00551915 Jy ! Component: 1900 - total flux cleaned = -0.00543705 Jy ! Component: 1950 - total flux cleaned = -0.0054906 Jy ! Component: 2000 - total flux cleaned = -0.00549024 Jy ! Total flux subtracted in 2048 components = -0.00538533 Jy ! Clean residual min=-0.001544 max=0.001506 Jy/beam ! Clean residual mean=-0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.92067 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 238 components and 0.92067 Jy ![Exited script file: muppet] wmap "J1658+4737_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8939 x 2.479 at -39.04 degrees (North through East) ! Clean map min=-0.0033039 max=0.5202 Jy/beam ! Writing clean map to FITS file: J1658+4737_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.520199 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000466667 device "J1658+4737_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1658+4737_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.269128 0.269128 0.538256 1.07651 2.15302 4.30605 8.6121 17.2242 34.4484 68.8968 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.52 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8939 x 2.479 at -39.04 degrees (North through East) ! Clean map min=-0.0033039 max=0.5202 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1658+4737_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1658+4737_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1658+4737_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 13:03:33 2006