! Started logfile: J1658+4737_S_2006_02_14_yyk_uvs.log on Wed Jul 5 13:01:10 2006 obs J1658+4737_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1658+4737_S_2006_02_14_yyk_uva.fits ! AN table 1: 238 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698133 visibilities/baseline/integration-bin. ! Found source: J1658+4737 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2686 lines of history. ! ! Reading 29908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1658+4737_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.10196 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=8.793 mas, bpa=-37.08 degrees ! Estimated noise=2.25647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.892604 Jy ! Component: 100 - total flux cleaned = 1.05609 Jy ! Total flux subtracted in 100 components = 1.05609 Jy ! Clean residual min=-0.039052 max=0.050647 Jy/beam ! Clean residual mean=0.000027 rms=0.013002 Jy/beam ! Combined flux in latest and established models = 1.05609 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.05609 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.192928Jy sigma=3.085356 ! Fit after self-cal, rms=0.192688Jy sigma=3.079459 ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=8.793 mas, bpa=-37.08 degrees ! Estimated noise=2.25647 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=9.144 mas, bpa=-37.75 degrees ! Estimated noise=1.55555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892594 Jy ! Component: 100 - total flux cleaned = 0.132008 Jy ! Component: 150 - total flux cleaned = 0.155844 Jy ! Component: 200 - total flux cleaned = 0.170226 Jy ! Total flux subtracted in 200 components = 0.170226 Jy ! Clean residual min=-0.025261 max=0.037792 Jy/beam ! Clean residual mean=0.000057 rms=0.007957 Jy/beam ! Combined flux in latest and established models = 1.22632 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 43 components and 1.22632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153183Jy sigma=2.465025 ! Fit after self-cal, rms=0.152828Jy sigma=2.457681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.173 x 9.144 at -37.75 degrees (North through East) ! Clean map min=-0.02402 max=1.0668 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00663 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.00 KP 0.95 ! LA 1.21 MK 0.89 NL 0.94 OV 0.98 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.987438 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00 KP 0.97 ! LA 1.18 MK 0.99 NL 0.96 OV 0.99 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.976269 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.03 KP 0.98 ! LA 0.95 MK 1.08 NL 1.06 OV 1.04 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03467 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.97 KP 0.90 ! LA 0.80 MK 1.10 NL 0.96 OV 0.86 ! PT 1.00* SC 1.15 ! ! ! Fit before self-cal, rms=0.152828Jy sigma=2.457681 ! Fit after self-cal, rms=0.086832Jy sigma=1.377430 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086832Jy sigma=1.377430 ! Fit after self-cal, rms=0.086853Jy sigma=1.377341 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=9.176 mas, bpa=-38.13 degrees ! Estimated noise=1.54761 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737664 Jy ! Component: 100 - total flux cleaned = 0.00438173 Jy ! Component: 150 - total flux cleaned = 0.00189951 Jy ! Component: 200 - total flux cleaned = 0.000208374 Jy ! Total flux subtracted in 200 components = 0.000208374 Jy ! Clean residual min=-0.006376 max=0.006390 Jy/beam ! Clean residual mean=0.000027 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 1.22653 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 1.22653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085213Jy sigma=1.338862 ! Fit after self-cal, rms=0.085103Jy sigma=1.338128 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085103Jy sigma=1.338128 ! Fit after self-cal, rms=0.079352Jy sigma=1.265068 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193535 Jy ! Component: 100 - total flux cleaned = -0.00292421 Jy ! Component: 150 - total flux cleaned = -0.00358813 Jy ! Component: 200 - total flux cleaned = -0.00437792 Jy ! Total flux subtracted in 200 components = -0.00437792 Jy ! Clean residual min=-0.006153 max=0.006447 Jy/beam ! Clean residual mean=0.000026 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 1.22215 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 101 components and 1.22215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079085Jy sigma=1.260260 ! Fit after self-cal, rms=0.078650Jy sigma=1.255631 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 9.176 at -38.13 degrees (North through East) ! Clean map min=-0.0059262 max=1.0697 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078650Jy sigma=1.255631 ! Fit after self-cal, rms=0.062230Jy sigma=0.947241 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062230Jy sigma=0.947241 ! Fit after self-cal, rms=0.062195Jy sigma=0.946841 ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=9.168 mas, bpa=-38.16 degrees ! Estimated noise=1.54479 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160133 Jy ! Component: 100 - total flux cleaned = -0.000709886 Jy ! Component: 150 - total flux cleaned = -0.000983608 Jy ! Component: 200 - total flux cleaned = -0.00131165 Jy ! Total flux subtracted in 200 components = -0.00131165 Jy ! Clean residual min=-0.005094 max=0.004989 Jy/beam ! Clean residual mean=0.000011 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 1.22084 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 123 components and 1.22084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061940Jy sigma=0.941640 ! Fit after self-cal, rms=0.061922Jy sigma=0.941467 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061922Jy sigma=0.941467 ! Fit after self-cal, rms=0.060452Jy sigma=0.913722 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060452Jy sigma=0.913722 ! Fit after self-cal, rms=0.060453Jy sigma=0.913717 ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=9.165 mas, bpa=-38.17 degrees ! Estimated noise=1.54435 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410656 Jy ! Component: 100 - total flux cleaned = -0.00089447 Jy ! Component: 150 - total flux cleaned = -0.00132722 Jy ! Component: 200 - total flux cleaned = -0.00159298 Jy ! Total flux subtracted in 200 components = -0.00159298 Jy ! Clean residual min=-0.004934 max=0.004881 Jy/beam ! Clean residual mean=0.000011 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 1.21925 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 137 components and 1.21925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060296Jy sigma=0.910880 ! Fit after self-cal, rms=0.060288Jy sigma=0.910780 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.213 mas, bmaj=9.57 mas, bpa=-41.75 degrees ! Estimated noise=1.91523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136379 Jy ! Component: 100 - total flux cleaned = -0.00169428 Jy ! Component: 150 - total flux cleaned = -0.00187373 Jy ! Component: 200 - total flux cleaned = -0.00190871 Jy ! Total flux subtracted in 200 components = -0.00190871 Jy ! Clean residual min=-0.005465 max=0.004624 Jy/beam ! Clean residual mean=0.000010 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 1.21734 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 156 components and 1.21734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060245Jy sigma=0.910473 ! Fit after self-cal, rms=0.060233Jy sigma=0.910293 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=8.812 mas, bpa=-37.26 degrees ! Estimated noise=2.25389 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.89181 Jy ! Component: 100 - total flux cleaned = 1.05474 Jy ! Component: 150 - total flux cleaned = 1.126 Jy ! Component: 200 - total flux cleaned = 1.16404 Jy ! Total flux subtracted in 200 components = 1.16404 Jy ! Clean residual min=-0.013298 max=0.016741 Jy/beam ! Clean residual mean=0.000016 rms=0.003872 Jy/beam ! Combined flux in latest and established models = 1.16404 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.16404 Jy ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=9.165 mas, bpa=-38.17 degrees ! Estimated noise=1.54435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312984 Jy ! Component: 100 - total flux cleaned = 0.0484727 Jy ! Component: 150 - total flux cleaned = 0.0563491 Jy ! Component: 200 - total flux cleaned = 0.0581914 Jy ! Total flux subtracted in 200 components = 0.0581914 Jy ! Clean residual min=-0.006042 max=0.006613 Jy/beam ! Clean residual mean=0.000026 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 1.22223 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 62 components and 1.22223 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.213 mas, bmaj=9.57 mas, bpa=-41.75 degrees ! Estimated noise=1.91523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243831 Jy ! Component: 100 - total flux cleaned = 0.0017344 Jy ! Component: 150 - total flux cleaned = 0.00144184 Jy ! Component: 200 - total flux cleaned = 0.000989874 Jy ! Total flux subtracted in 200 components = 0.000989874 Jy ! Clean residual min=-0.006531 max=0.005517 Jy/beam ! Clean residual mean=0.000020 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 1.22322 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 98 components and 1.22322 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=9.165 mas, bpa=-38.17 degrees ! Estimated noise=1.54435 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337218 Jy ! Component: 100 - total flux cleaned = 4.84437e-05 Jy ! Component: 150 - total flux cleaned = 0.000267589 Jy ! Component: 200 - total flux cleaned = 0.000371836 Jy ! Total flux subtracted in 200 components = 0.000371836 Jy ! Clean residual min=-0.005025 max=0.005322 Jy/beam ! Clean residual mean=0.000015 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 1.2236 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 1.2236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060489Jy sigma=0.915754 ! Fit after self-cal, rms=0.060496Jy sigma=0.915506 wmodel J1658+4737_S_2006_02_14_yyk\_map.mod ! Writing 119 model components to file: J1658+4737_S_2006_02_14_yyk_map.mod wobs J1658+4737_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1658+4737_S_2006_02_14_yyk_uvs.fits wwins J1658+4737_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J1658+4737_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000755957 Jy ! Component: 100 - total flux cleaned = 0.00149433 Jy ! Component: 150 - total flux cleaned = 0.00231439 Jy ! Component: 200 - total flux cleaned = 0.00300362 Jy ! Component: 250 - total flux cleaned = 0.00365187 Jy ! Component: 300 - total flux cleaned = 0.00420321 Jy ! Component: 350 - total flux cleaned = 0.0040869 Jy ! Component: 400 - total flux cleaned = 0.00386539 Jy ! Component: 450 - total flux cleaned = 0.00365278 Jy ! Component: 500 - total flux cleaned = 0.00334158 Jy ! Component: 550 - total flux cleaned = 0.00298955 Jy ! Component: 600 - total flux cleaned = 0.00264752 Jy ! Component: 650 - total flux cleaned = 0.00241113 Jy ! Component: 700 - total flux cleaned = 0.00217989 Jy ! Component: 750 - total flux cleaned = 0.00195527 Jy ! Component: 800 - total flux cleaned = 0.00173789 Jy ! Component: 850 - total flux cleaned = 0.00161072 Jy ! Component: 900 - total flux cleaned = 0.0013628 Jy ! Component: 950 - total flux cleaned = 0.0012006 Jy ! Component: 1000 - total flux cleaned = 0.0010815 Jy ! Component: 1050 - total flux cleaned = 0.000964968 Jy ! Component: 1100 - total flux cleaned = 0.000850441 Jy ! Component: 1150 - total flux cleaned = 0.000700638 Jy ! Component: 1200 - total flux cleaned = 0.00048188 Jy ! Component: 1250 - total flux cleaned = 0.000374528 Jy ! Component: 1300 - total flux cleaned = 0.000339395 Jy ! Component: 1350 - total flux cleaned = 0.000338942 Jy ! Component: 1400 - total flux cleaned = 0.000270392 Jy ! Component: 1450 - total flux cleaned = 0.00020328 Jy ! Component: 1500 - total flux cleaned = 0.000202309 Jy ! Component: 1550 - total flux cleaned = 7.1726e-06 Jy ! Component: 1600 - total flux cleaned = -2.4907e-05 Jy ! Component: 1650 - total flux cleaned = -0.000151215 Jy ! Component: 1700 - total flux cleaned = -0.000214184 Jy ! Component: 1750 - total flux cleaned = -0.000306211 Jy ! Component: 1800 - total flux cleaned = -0.000336902 Jy ! Component: 1850 - total flux cleaned = -0.000486316 Jy ! Component: 1900 - total flux cleaned = -0.000486407 Jy ! Component: 1950 - total flux cleaned = -0.000515701 Jy ! Component: 2000 - total flux cleaned = -0.000601891 Jy ! Total flux subtracted in 2048 components = -0.000658783 Jy ! Clean residual min=-0.001431 max=0.001558 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 1.22294 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 250 components and 1.22294 Jy ![Exited script file: muppet] wmap "J1658+4737_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 9.165 at -38.17 degrees (North through East) ! Clean map min=-0.0047014 max=1.0705 Jy/beam ! Writing clean map to FITS file: J1658+4737_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.07051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000561577 device "J1658+4737_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1658+4737_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.157376 0.157376 0.314753 0.629506 1.25901 2.51802 5.03605 10.0721 20.1442 40.2884 80.5767 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 9.165 at -38.17 degrees (North through East) ! Clean map min=-0.0047014 max=1.0705 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1658+4737_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1658+4737_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1658+4737_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 13:01:47 2006