! Started logfile: J1613+3412_X_2006_02_23_yyk_uvs.log on Wed Jul 5 12:57:27 2006 obs J1613+3412_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1613+3412_X_2006_02_23_yyk_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981718 visibilities/baseline/integration-bin. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2397 lines of history. ! ! Reading 24916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1613+3412_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.43749 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7673 mas, bmaj=2.154 mas, bpa=18.98 degrees ! Estimated noise=1.99089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.83821 Jy ! Component: 100 - total flux cleaned = 3.50779 Jy ! Total flux subtracted in 100 components = 3.50779 Jy ! Clean residual min=-0.188761 max=0.291718 Jy/beam ! Clean residual mean=-0.001221 rms=0.048381 Jy/beam ! Combined flux in latest and established models = 3.50779 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 3.50779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653042Jy sigma=12.414635 ! Fit after self-cal, rms=0.629866Jy sigma=12.106399 ! Inverting map ! Added new window around map position (0.6, -3.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.341746 Jy ! Component: 100 - total flux cleaned = 0.532001 Jy ! Total flux subtracted in 100 components = 0.532001 Jy ! Clean residual min=-0.151561 max=0.121557 Jy/beam ! Clean residual mean=-0.000849 rms=0.031108 Jy/beam ! Combined flux in latest and established models = 4.03979 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 35 components and 4.03979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.444803Jy sigma=8.316014 ! Fit after self-cal, rms=0.431089Jy sigma=8.107538 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.903 mas, bmaj=2.275 mas, bpa=18.17 degrees ! Estimated noise=1.63141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.231353 Jy ! Component: 100 - total flux cleaned = 0.379411 Jy ! Component: 150 - total flux cleaned = 0.48615 Jy ! Component: 200 - total flux cleaned = 0.564961 Jy ! Total flux subtracted in 200 components = 0.564961 Jy ! Clean residual min=-0.120171 max=0.091948 Jy/beam ! Clean residual mean=-0.000920 rms=0.025381 Jy/beam ! Combined flux in latest and established models = 4.60475 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 78 components and 4.60475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319248Jy sigma=5.765142 ! Fit after self-cal, rms=0.309963Jy sigma=5.602535 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.903 x 2.275 at 18.17 degrees (North through East) ! Clean map min=-0.1044 max=3.2378 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995195 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.07 KP 0.97 ! LA 0.98 MK 1.02 NL 1.04 OV 1.00 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0133 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.05 KP 0.90 ! LA 0.94 MK 0.98 NL 1.02 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00972 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 0.95 KP 0.84 ! LA 0.95 MK 1.03 NL 1.00 OV 1.00 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.989665 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.08 HN 0.99 KP 0.86 ! LA 0.94 MK 1.04 NL 1.02 OV 1.04 ! PT 1.09 SC 1.01 ! ! ! Fit before self-cal, rms=0.309963Jy sigma=5.602535 ! Fit after self-cal, rms=0.162458Jy sigma=3.062476 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162458Jy sigma=3.062476 ! Fit after self-cal, rms=0.162598Jy sigma=3.062107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9133 mas, bmaj=2.298 mas, bpa=18.25 degrees ! Estimated noise=1.6254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832727 Jy ! Component: 100 - total flux cleaned = 0.11281 Jy ! Component: 150 - total flux cleaned = 0.122017 Jy ! Component: 200 - total flux cleaned = 0.123025 Jy ! Total flux subtracted in 200 components = 0.123025 Jy ! Clean residual min=-0.026051 max=0.040126 Jy/beam ! Clean residual mean=-0.000276 rms=0.008365 Jy/beam ! Combined flux in latest and established models = 4.72778 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 111 components and 4.72778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129850Jy sigma=2.398280 ! Fit after self-cal, rms=0.127050Jy sigma=2.366495 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127050Jy sigma=2.366495 ! Fit after self-cal, rms=0.120415Jy sigma=2.242195 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, -7.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425712 Jy ! Component: 100 - total flux cleaned = 0.0589426 Jy ! Component: 150 - total flux cleaned = 0.0647307 Jy ! Component: 200 - total flux cleaned = 0.0697145 Jy ! Total flux subtracted in 200 components = 0.0697145 Jy ! Clean residual min=-0.022466 max=0.021369 Jy/beam ! Clean residual mean=-0.000165 rms=0.006092 Jy/beam ! Combined flux in latest and established models = 4.79749 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 140 components and 4.79749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106844Jy sigma=1.966768 ! Fit after self-cal, rms=0.105837Jy sigma=1.951540 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9133 x 2.298 at 18.25 degrees (North through East) ! Clean map min=-0.020846 max=3.2365 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105837Jy sigma=1.951540 ! Fit after self-cal, rms=0.078872Jy sigma=1.416036 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078872Jy sigma=1.416036 ! Fit after self-cal, rms=0.078824Jy sigma=1.415165 ! Inverting map and beam ! Estimated beam: bmin=0.9149 mas, bmaj=2.304 mas, bpa=18.29 degrees ! Estimated noise=1.62096 mJy/beam. ! Added new window around map position (-1.4, -4.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.022344 Jy ! Component: 100 - total flux cleaned = 0.0231108 Jy ! Component: 150 - total flux cleaned = 0.0214872 Jy ! Component: 200 - total flux cleaned = 0.0195315 Jy ! Total flux subtracted in 200 components = 0.0195315 Jy ! Clean residual min=-0.014665 max=0.015668 Jy/beam ! Clean residual mean=-0.000086 rms=0.004205 Jy/beam ! Combined flux in latest and established models = 4.81702 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 171 components and 4.81702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069518Jy sigma=1.232395 ! Fit after self-cal, rms=0.068862Jy sigma=1.220745 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068862Jy sigma=1.220745 ! Fit after self-cal, rms=0.068118Jy sigma=1.201298 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068118Jy sigma=1.201298 ! Fit after self-cal, rms=0.068118Jy sigma=1.201290 ! Inverting map and beam ! Estimated beam: bmin=0.9155 mas, bmaj=2.306 mas, bpa=18.32 degrees ! Estimated noise=1.62083 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695722 Jy ! Component: 100 - total flux cleaned = 0.00521495 Jy ! Component: 150 - total flux cleaned = 0.00330724 Jy ! Component: 200 - total flux cleaned = 0.000911395 Jy ! Total flux subtracted in 200 components = 0.000911395 Jy ! Clean residual min=-0.012728 max=0.013056 Jy/beam ! Clean residual mean=-0.000078 rms=0.003472 Jy/beam ! Combined flux in latest and established models = 4.81793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 186 components and 4.81793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063863Jy sigma=1.122273 ! Fit after self-cal, rms=0.063569Jy sigma=1.116274 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=2.95 mas, bpa=7.145 degrees ! Estimated noise=2.07702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683186 Jy ! Component: 100 - total flux cleaned = -0.0047214 Jy ! Component: 150 - total flux cleaned = -0.00805722 Jy ! Component: 200 - total flux cleaned = -0.0100399 Jy ! Total flux subtracted in 200 components = -0.0100399 Jy ! Clean residual min=-0.014640 max=0.015208 Jy/beam ! Clean residual mean=-0.000198 rms=0.004618 Jy/beam ! Combined flux in latest and established models = 4.80789 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 213 components and 4.80789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062121Jy sigma=1.084851 ! Fit after self-cal, rms=0.061927Jy sigma=1.081099 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7715 mas, bmaj=2.164 mas, bpa=18.99 degrees ! Estimated noise=1.98754 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.83144 Jy ! Component: 100 - total flux cleaned = 3.5243 Jy ! Component: 150 - total flux cleaned = 3.85118 Jy ! Component: 200 - total flux cleaned = 4.05377 Jy ! Total flux subtracted in 200 components = 4.05377 Jy ! Clean residual min=-0.050664 max=0.095312 Jy/beam ! Clean residual mean=-0.000667 rms=0.021303 Jy/beam ! Combined flux in latest and established models = 4.05377 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 4.05377 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9155 mas, bmaj=2.306 mas, bpa=18.32 degrees ! Estimated noise=1.62083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.4, 20.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.204995 Jy ! Component: 100 - total flux cleaned = 0.337394 Jy ! Component: 150 - total flux cleaned = 0.429962 Jy ! Component: 200 - total flux cleaned = 0.497108 Jy ! Total flux subtracted in 200 components = 0.497108 Jy ! Clean residual min=-0.027856 max=0.035892 Jy/beam ! Clean residual mean=-0.000643 rms=0.010293 Jy/beam ! Combined flux in latest and established models = 4.55088 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 104 components and 4.55088 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=2.95 mas, bpa=7.145 degrees ! Estimated noise=2.07702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0872446 Jy ! Component: 100 - total flux cleaned = 0.138227 Jy ! Component: 150 - total flux cleaned = 0.173527 Jy ! Component: 200 - total flux cleaned = 0.199813 Jy ! Total flux subtracted in 200 components = 0.199813 Jy ! Clean residual min=-0.022019 max=0.022633 Jy/beam ! Clean residual mean=-0.000491 rms=0.007196 Jy/beam ! Combined flux in latest and established models = 4.75069 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 171 components and 4.75069 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9155 mas, bmaj=2.306 mas, bpa=18.32 degrees ! Estimated noise=1.62083 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777847 Jy ! Component: 100 - total flux cleaned = 0.0131928 Jy ! Component: 150 - total flux cleaned = 0.0172891 Jy ! Component: 200 - total flux cleaned = 0.019918 Jy ! Total flux subtracted in 200 components = 0.019918 Jy ! Clean residual min=-0.015336 max=0.015824 Jy/beam ! Clean residual mean=-0.000173 rms=0.003817 Jy/beam ! Combined flux in latest and established models = 4.77061 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 199 components and 4.77061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067920Jy sigma=1.198385 ! Fit after self-cal, rms=0.066081Jy sigma=1.159156 wmodel J1613+3412_X_2006_02_23_yyk\_map.mod ! Writing 199 model components to file: J1613+3412_X_2006_02_23_yyk_map.mod wobs J1613+3412_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1613+3412_X_2006_02_23_yyk_uvs.fits wwins J1613+3412_X_2006_02_23_yyk\_map.win ! wwins: Wrote 6 windows to J1613+3412_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014958 Jy ! Component: 100 - total flux cleaned = -0.00411855 Jy ! Component: 150 - total flux cleaned = -0.00531144 Jy ! Component: 200 - total flux cleaned = -0.00658963 Jy ! Component: 250 - total flux cleaned = -0.00727595 Jy ! Component: 300 - total flux cleaned = -0.00825951 Jy ! Component: 350 - total flux cleaned = -0.00919017 Jy ! Component: 400 - total flux cleaned = -0.0100725 Jy ! Component: 450 - total flux cleaned = -0.0109157 Jy ! Component: 500 - total flux cleaned = -0.0115919 Jy ! Component: 550 - total flux cleaned = -0.0119869 Jy ! Component: 600 - total flux cleaned = -0.012615 Jy ! Component: 650 - total flux cleaned = -0.0127321 Jy ! Component: 700 - total flux cleaned = -0.0128472 Jy ! Component: 750 - total flux cleaned = -0.0127333 Jy ! Component: 800 - total flux cleaned = -0.0126208 Jy ! Component: 850 - total flux cleaned = -0.0125137 Jy ! Component: 900 - total flux cleaned = -0.0123074 Jy ! Component: 950 - total flux cleaned = -0.0125089 Jy ! Component: 1000 - total flux cleaned = -0.012507 Jy ! Component: 1050 - total flux cleaned = -0.0125044 Jy ! Component: 1100 - total flux cleaned = -0.012412 Jy ! Component: 1150 - total flux cleaned = -0.0125064 Jy ! Component: 1200 - total flux cleaned = -0.0127714 Jy ! Component: 1250 - total flux cleaned = -0.012943 Jy ! Component: 1300 - total flux cleaned = -0.0130262 Jy ! Component: 1350 - total flux cleaned = -0.0128585 Jy ! Component: 1400 - total flux cleaned = -0.0127771 Jy ! Component: 1450 - total flux cleaned = -0.0124617 Jy ! Component: 1500 - total flux cleaned = -0.0122308 Jy ! Component: 1550 - total flux cleaned = -0.0121565 Jy ! Component: 1600 - total flux cleaned = -0.0122302 Jy ! Component: 1650 - total flux cleaned = -0.0121568 Jy ! Component: 1700 - total flux cleaned = -0.0122985 Jy ! Component: 1750 - total flux cleaned = -0.012299 Jy ! Component: 1800 - total flux cleaned = -0.0123003 Jy ! Component: 1850 - total flux cleaned = -0.0125046 Jy ! Component: 1900 - total flux cleaned = -0.0124388 Jy ! Component: 1950 - total flux cleaned = -0.0128341 Jy ! Component: 2000 - total flux cleaned = -0.0129631 Jy ! Total flux subtracted in 2048 components = -0.0131541 Jy ! Clean residual min=-0.003729 max=0.003732 Jy/beam ! Clean residual mean=-0.000038 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 4.75746 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 343 components and 4.75746 Jy ![Exited script file: muppet] wmap "J1613+3412_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9155 x 2.306 at 18.32 degrees (North through East) ! Clean map min=-0.011606 max=3.2285 Jy/beam ! Writing clean map to FITS file: J1613+3412_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.22845 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00119454 device "J1613+3412_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1613+3412_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.111001 0.111001 0.222002 0.444004 0.888008 1.77602 3.55203 7.10407 14.2081 28.4163 56.8325 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.228 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9155 x 2.306 at 18.32 degrees (North through East) ! Clean map min=-0.011606 max=3.2285 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1613+3412_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1613+3412_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1613+3412_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:57:59 2006